Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reactor Physics Method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Validation of Thermal Scattering Laws for Light Water at Elevated Temperatures with Diffusion Experiments

Light water is the most important neutron moderator in many reactor applications. Thermal neutron scattering kernels for H bound in H 2 O are represented by ENDF-format thermal scattering laws (TSLs) evaluated at discrete temperatures T . Nuclear data evaluations are conventionally validated utilizing a combination of critical benchmarks and experimental cross section data. Existing public critical benchmarks may be inadequate for testing water TSLs over the full range of T of interest in reactor applications, and experimental thermal scattering cross section data for water is sparse at elevated T . In this work, MC21 is used to simulate the decay of the equilibrium thermal neutron flux in light-water spheres of several radii. The fundamental-mode time eigenvalue $\mathcal{a}$ is calculated at 22 °C and 227 °C (at saturation pressure) for each sphere using three different H-H 2 O TSLs. Fitting $\mathcal{a}$ to a polynomial function of geometric buckling allows calculation of the thermal neutron diffusion length L . Extrapolation lengths are treated as a function of the transport mean free path and geometry. Experimental L data from 25 publications at 49 temperatures (from 10 °C to 295 °C), computed by several different time-dependent and space-dependent decay methods, is used to develop an empirical fit of L vs. T . The MC21-calculated L for the TSLs tested are within ±1% of the predicted values at 22 °C and 227 °C. This validation approach, which may be repeated at arbitrary T , constitutes an integral benchmark specific to and characterizing the detailed physics of the thermal scattering kernel applied.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Remote Fiber Based Velocimeter For Interface Strength Measurements

The understanding of the performance of nuclear reactor plate fuels is essential when developing new fuel systems. The condition of pre and post irradiated plate fuels must be characterized effectively and efficiently prior to irradiation and then post irradiation within a high rad environment. The post characterization work must be performed remotely and in an environment hostile to instrumentation. Laser based characterization methods provide the capability to be remote and robust within a hot-cell environment. Laser based characterization can provide high spatial resolution appropriate for scanning and imaging large areas. The INL is currently developing a laser shock system for Post Irradiation Examination (PIE) station for use in the Hot Fuel Examination Facility (HFEF) at the INL. The laser shock system is designed to characterize fuel to cladding and cladding to cladding interface strength. The laser shock-technique induces large amplitude shock waves to mechanically characterize interfaces such as the fuel-clad interface. The shock wave propagates as a compressional wave through the fuel plate to the free (unconfined) backside surface and is reflected back through the test plate as a rarefaction (tensile) wave. This rarefaction wave is the physical mechanism that produces internal delamination failure. The focus or this paper is on the accurate measurement of surface velocity to quantify the amount of energy traveling through the interfaces to the back surface of the fuel plate. The original fiber based velocimeter design was biased by parasitic back reflections. This paper will discuss the discovery of the back-reflection issue and the design changes to resolve the issue. Supporting data will be presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fission Matrix Convergence Diagnostic of the Iterated Fission Probability Method

Monte Carlo methods have been applied to reactor problems in order to solve for adjoint-weighted quantities. The Iterated Fission Probability (IFP) method allows adjoint-weighted tallies to be recorded during a forward Monte-Carlo simulation. A key parameter in the IFP method is the number of generations that must pass before the progeny neutrons of a progenitor neutron are tallied. A convergence diagnostic for the IFP is developed using a deterministic code. In particular, a discrete ordinates code is used as a surrogate to demonstrate the theoretical properties of the proposed Monte Carlo convergence diagnostic. The diagnostic is applied to 1-D slab problems and quantifies the error associated with tallying the neutron progeny before an asymptotic distribution is achieved. The results show that the default value of 10 for the number of generations used in MCNP is acceptable for most classes of problems. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Efficient hydrogenation of benzaldoximes and Schiff bases on ceramic high-porosity palladium catalysts

An efficient catalytic method for the synthesis of benzyl- and dibenzylamines by hydrogenating oximes and Schiffbases was developed on palladium supported high-porosity foamed ceramic block catalyst. The multiple regeneration ability of the foamed ceramic block catalyst can significantly decrease the Pd consumption as compared to the use of the conventional 10%Pd/C catalyst. Owing to a high hardness of the foamed ceramic catalyst, the reaction mixture can rapidly be removed from the reactor without using filtering devices. The structures produced by the reaction are fragments of biologically active and natural molecules. Antiproliferative properties of dibenzylamines revealed on the sea urchin embryo model suggest that these compounds can be considered as promising agents for the design of new anticancer drugs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sustainable valorization of waste tires: Selective hydrotreating for renewable p-cymene production

The escalating global concern over waste tire management driven by the surge in automobiles necessitates sustainable and innovative solutions. Here, this study posits a novel approach by introducing a selective catalytic hydrogenation and dehydrogenation process using a tandem two-stage pressurized fixed-bed reactor, aiming to convert waste tires into valuable sulfur-free p-cymene. The experimental results indicate that among the studied catalysts including Pt/C, Pd/C, Ru/C, and Ni/Al 2 O 3 -SiO 2 , the Pd/C exhibits concomitant hydrogenation and dehydrogenation functionalities, achieving full conversion and displaying 100 % selectivity towards p-cymene from limonene model compound. Furthermore, the Pd/C catalyst demonstrates remarkable efficiency in converting real-world waste tires into p-cymene, yielding up to 134.8 mg/g at optimal conditions. Importantly, this catalyst also facilitates complete hydrodesulfurization activity, addressing environmental concerns by producing sulfur-free liquid products. This innovative method not only optimizes p-cymene synthesis from waste tires but also contributes to environmental sustainability, showcasing both economic and ecological viability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Top Launch for Higher Off-axis Electron Cyclotron Current Drive Efficiency

Efficient off-axis current drive is crucial for economic, steady-state tokamak fusion power plants. "Top Launch" electron cyclotron current drive (ECCD) is one promising method for driving strong off-axis current to achieve the desired broad current profile for the Advanced Tokamak regime. New simulations show that by launching the electron cyclotron (EC) waves downwards (or upwards) nearly parallel to the resonance plane with a large toroidal steering, higher current drive efficiency can be obtained at large radii owing to the large Doppler shift, wave-particle interactions on HFS of the plasma, and the long absorption path. Implementations on CFETR and DIII-D are simulated identifying clear benefits and optimal configurations. The design of a prototype test being installed on DIII-D is presented, which will experimentally validate whether top launch ECCD can be an improved efficiency current drive technique for future fusion reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Novel SOLPS-ITER simulations of X-point target and snowflake divertors

Abstract The design and understanding of alternative divertor configurations may be crucial for achieving acceptable steady-state heat and particle material loads for magnetic confinement fusion reactors. Multiple X-point alternative divertor geometries such as snowflakes and X-point targets have great potential in reducing power loads, but have not yet been simulated widely in codes with kinetic neutrals. This paper discusses recent changes made to the SOLPS-ITER code to allow for the simulation of X-point target and low-field side snowflake divertor geometries. Snowflake simulations using this method are presented, in addition to the first SOLPS-ITER simulation of the X-point target. Analysis of these results show reasonable consistency with the simple modelling and theoretical predictions, supporting the validity of the methodology implemented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast Time Response Electromagnetic Disruption Mitigation Concept

An important and urgent issue for ITER is predicting and controlling disruptions. Tokamaks and spherical tokamaks have the potential to disrupt. Methods to rapidly quench the discharge after an impending disruption is detected are essential to protect the vessel and internal components. The warning time for the onset of some disruptions in tokamaks could be <10 ms, which poses stringent requirements on the disruption mitigation system for reactor systems. In this proposed method, a cylindrical boron nitride projectile containing a radiative payload composed of boron, boron nitride, or beryllium particulate matter and weighing similar to 15 g is accelerated to velocities on the order of 1 to 2 km/s in <2 ms in a linear rail gun accelerator. A partially fragmented capsule is then injected into the tokamak discharge in the 3- to 6-ms timescale, where the radiative payload is dispersed. The device referred to as an electromagnetic particle injector has the potential to meet the short warning timescales for which a reactor disruption mitigation system must be built. The system is fully electromagnetic, with no mechanical moving parts, which ensures high reliability after a period of long standby.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

RMC - A Monte Carlo code for reactor physics analysis

A new Monte Carlo neutron transport code RMC has been being developed by Department of Engineering Physics, Tsinghua University, Beijing as a tool for reactor physics analysis on high-performance computing platforms. To meet the requirements of reactor analysis, RMC now has such functions as criticality calculation, fixed-source calculation, burnup calculation and kinetics simulations. Some techniques for geometry treatment, new burnup algorithm, source convergence acceleration, massive tally and parallel calculation, and temperature dependent cross sections processing are researched and implemented in RMC to improve the efficiency. Validation results of criticality calculation, burnup calculation, source convergence acceleration, tallies performance and parallel performance shown in this paper prove the capabilities of RMC in dealing with reactor analysis problems with good performances. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A Compact Fusion–Fission Hybrid Reactor

Up today, two hyper research projects to achieve nuclear fusion energy exist; inertial confinement fusion (ICF) driven by laser, called national ignition facility (NIF) and magnetic confinement fusion the international thermonuclear experimental reactor (ITER) project. In reaching the required temperature and pressure, to ignite nuclear fusion reactor, is technologically complex and economically expensive. Thus, a breakthrough and a short cut, other alternative methods should be considered. Pulsed power ICF driver with repetitive pulse operation, mainly dense plasma focus (DPF) machines for high yield fusion neutrons could be taken as drivers for the fission blanket operation. The setup can be a cost-effective and efficient. In this article, we consider a set of two medium energy sizes DPF to produce simultaneously dense plasma columns, operating as thermonuclear plasma driver, to pierce the pellet target for external nuclear fusion reactions. These DPFs produce sufficient fast neutrons for the fission process in the neutral uranium or thorium and/or weak enriched uranium blanket. The drive systems and the concept for delivering thermonuclear plasma to pellets target in the magnetic free zone of central region will be presented. The feasibility of such fusion–fission hybrid reactor will be discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Poplar lignin structural changes during extraction in γ-valerolactone (GVL)

In this paper, we describe an approach for producing both high quality and high quantity of lignin through studying the structural change of lignin during treatment of poplar wood in γ-valerolactone (GVL) for a range of temperatures (from 80 to 120 °C) and reaction time at temperature (from 1 to 24 h). Throughout the study, various techniques, including nuclear magnetic resonance (NMR) spectroscopies (solution- and gel-state 1 H –13 C 2D HSQC and 31 P) and gel-permeation chromatography (GPC) were applied to characterize the lignin structures. As the GVL-extracted lignin yield increases, the level of β-ether units decreases and the level of condensation products increases. The β-ether content, the aliphatic hydroxyl group content, and the molecular weight of the GVL-extracted lignin fractions were close to the poplar lignin from other preparation methods (e.g., enzyme lignin). A two-step hydrolytic process (120 °C, 2 × 15 min) gave a higher lignin yield (56.5% vs. 54.8%) with three times higher β-ether content (31.9% vs. 10.6%) than lignin extracted from a single-step process at 120 °C for 1 h. The results demonstrate that multiple-step cycling of cosolvent-assisted hydrolysis can help preserve more of the virgin ether-bond structures of GVL-extracted poplar lignin. Such a strategy can also be applied to a fully continuous-flow reactor system in future research to further improve both the productivity and quality of GVL-extracted lignin.

2D HSQC NMR↗

Room-temperature ballistic energy transport in molecules with repeating units

In materials, energy can propagate by means of two limiting regimes: diffusive and ballistic. Ballistic energy transport can be fast and efficient and often occurs with a constant speed. Using two-dimensional infrared spectroscopy methods, we discovered ballistic energy transport via individual polyethylene chains with a remarkably high speed of 1440 m/s and the mean free path length of 14.6 Å in solution at room temperature. Whereas the transport via the chains occurs ballistically, the mechanism switches to diffusive with the effective transport speed of 130 m/s at the end-groups attached to the chains. A unifying model of the transport in molecules is presented with clear time separation and additivity among the transport along oligomeric fragments, which occurs ballistically, and the transport within the disordered fragments, occurring diffusively. The results open new avenues for making novel elements for molecular electronics, including ultrafast energy transporters, controlled chemical reactors, and sub-wavelength quantum nanoseparators.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Digitally manufactured air plasma-on-water reactor for nitrate production

The sustainable production of food to support the increasing world population is one of humanity’s most pressing challenges. Plasma activated water, produced using renewable energy, can help fulfill plants’ needs in sustainable agriculture approaches. The design, implementation, and characterization of a digitally manufactured air plasma-on-water reactor (POWR) for the synthesis of nitrate as green nitrogen fertilizer is presented. The interaction of air plasma-generated reactive oxygen and nitrogen species with water produces nitrate (NO 3 - ) and related species, which are the main nitrogen-containing nutrients for plants. The mild conditions of the operation of the POWR opens the possibility to use plastics, particularly through digital manufacturing strategies such as 3D-printing, for its fabrication. A pin-to-plate reactor configuration powered by high-voltage alternating power is chosen due to its simplicity and efficacy. A computational thermal-fluid model is used to evaluate the design and attain expected operational characteristics. The experimental characterization of the POWR encompassed design and operation parameters, namely electrode-water spacing, air flow rate, and voltage level. A machine learning approach is implemented to extract and quantify characteristic features of the plasma–water interaction, such plasma volume and plasma–water interface area. Experimental results revealed that the nitrate production rate varies linearly with dimensionless plasma volume. The design, fabrication, and characterization methods presented can be adapted to other POWRs and help enable on-demand nitrogen fertilizer production at low environmental and economic cost.

Physics↗

Isotopic molybdenum total neutron cross section in the unresolved resonance region

Accurate isotopic molybdenum nuclear data are important because molybdenum can exist in nuclear reactor components including fuel, cladding, or as a high yield fission product. High-resolution time-of-flight neutron transmission measurements on highly enriched isotopic metallic samples of 95 Mo, 96 Mo, 98 Mo, and 100 Mo were performed in the resonance energy range from 1 to 620 keV. The measurements were taken with the newly developed modular 6 Li-glass transmission detector positioned at the 100-m experimental flight station. For the unresolved energy region (URR), new comprehensive methods of analysis were developed and validated in order to obtain accurate neutron total cross-section data from the measurement by correcting for background and transmission enhancement effects. Average parameters and fits to the total cross section for 95 Mo were obtained using the Hauser-Feshbach statistical model code FITACS, which is currently incorporated into the SAMMY code. Moreover, fits to the experimental data deviate from the current evaluated nuclear data file/B-VII.1 isotopic Mo evaluations by several percent in the URR.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Thermonuclear fusion rates for tritium + deuterium using Bayesian methods

The 3 H(d, n) 4 He reaction has a large low-energy cross section and will likely be utilized in future commercial fusion reactors. This reaction also takes place during Big Bang nucleosynthesis. Studies of both scenarios require accurate and precise fusion rates. To this end, we implement a one-level, two-channel R-matrix approximation into a Bayesian model. Our main goals are to predict reliable astrophysical S-factors and to estimate R-matrix parameters using the Bayesian approach. All relevant parameters are sampled in our study, including the channel radii, boundary condition parameters, and data set normalization factors. In addition, we take uncertainties in both measured bombarding energies and S-factors rigorously into account. Thermonuclear rates and reactivities of the 3 H(d, n) 4 He reaction are derived by numerically integrating the Bayesian S-factor samples. The present reaction rate uncertainties at temperatures between 1.0 MK and 1.0 GK are in the range of 0.2% to 0.6%. Our reaction rates differ from previous results by 2.9% near 1.0 GK.Our reactivities are smaller than previous results, with a maximum deviation of 2.9% near a thermal energy of 4 keV. The present rate or reactivity uncertainties are more reliable compared to previous studies that did not include the channel radii, boundary condition parameters, and data set normalization factors in the fitting. Finally, we investigate previous claims of electron screening effects in the published 3 H(d, n) 4 He data. No such effects are evident and only an upper limit for the electron screening potential can be obtained.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Analytic error analysis of cross section interpolation methods in nodal diffusion codes - I : Theory

This paper discusses two cross section interpolation methods commonly found in popular nodal codes; the partial derivatives and multiple tables models. The motivation for choosing a model, and thus a case matrix structure, is a trade off between accuracy and computational cost. Due to decades of experience, there are default structures that are sufficient for current light water reactor analysis. However, this is not necessarily the case for advanced reactor designs. Therefore, it is advantageous to understand the sources of error in cross section interpolation models so that the quality of a case matrix may be improved. A mathematical framework for these models is presented in this work that provides a more rigorous connection between the nuclear engineering field's cross section interpolation methods and the broader mathematical field of function approximation. The two cross section models examined in this paper were found to utilize Lagrange interpolation and are a subset of Lagrange tensor products. Classical results of Lagrange polynomial error analysis were then applied to the partial derivative and multiple tables models to derive expressions for the total point-wise error. The analytical results classify the total error into two parts: the model form error and interpolation error. Finally, based on our observations, a better foundation for improving the quality of a case matrix is proposed. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Construction of a cyber attack model for nuclear power plants - 115

The consideration of how a compromised digital component can impact neighboring components is critical to understanding the progression of cyber attacks. The degree of influence that one component may have on another depends on a variety of factors, including the sharing of resources such as network bandwidth or processing power, the level of trust between components, and the inclusion of segmentation devices such as firewalls. The interactions among components via mechanisms that are unique to the digital world are not usually considered in traditional probabilistic risk assessment (PRA). This means potential sequences of events that may occur during an attack may be missed if one were to only look at conventional accident sequences. This paper presents a method where, starting from the initial attack vector, the progression of a cyber attack can be modeled. The propagation of the attack is modeled by considering certain attributes of the digital components in the system. These attributes determine the potential vulnerability of a component to different classes of attack and the capability gained by the attackers once they are in control of the equipment. The use of attributes allows similar components (components with the same set of attributes) to be modeled in the same way, thereby reducing the computing resources required for analyzing large systems. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Device and method for upgrading petroleum feedstocks and petroleum refinery streams using an alkali metal conductive membrane

A reactor has two chambers, namely an oil feedstock chamber and a source chamber. An ion separator separates the oil feedstock chamber from the source chamber, wherein the ion separator allows alkali metal ions to pass from the source chamber, through the ion separator, and into the oil feedstock chamber. A cathode is at least partially housed within the oil feedstock chamber and an anode is at least partially housed within the source chamber. A quantity of an oil feedstock is within the oil feedstock chamber, the oil feedstock comprising at least one carbon atom and a heteroatom and/or one or more heavy metals, the oil feedstock further comprising naphthenic acid. When the alkali metal ion enters the oil feedstock chamber, the alkali metal reacts with the heteroatom, the heavy metals and/or the naphthenic acid, wherein the reaction with the alkali metal forms inorganic products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗