Search NASA⌕ Search

SEARCH · Search NASA

Results for “STRESS CALCULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Real-Time Lifetime Prediction of Semiconductor Devices Using Hardware-in-the-Loop

This paper presents a unique approach to enable real-time lifespan prediction of semiconductor power modules using a Hardware-in-the-Loop (HIL) system. By integrating the module's overall loss characteristics-specifically switching and conduction losses-with a thermoelectric model of the thermal management system, this research demonstrates that the model can dynamically estimates the junction temperature profile of the semiconductor devices in response to a changing torque demand profile for the motor drive system. This capability enables continuous monitoring of the module's operational time and cumulative stress induced on the devices to compute accumulated remaining lifetime or time-to-failure (TTF). This study provides an architectural framework for the HIL system with high-fidelity component models of multiple physical domains, allowing simulation of dynamic behaviors of a closely-coupled motor drive system. The advanced real-time computation and measurement functionalities of the HIL system allow for both dynamic lifetime calculations based on simulated data and aggregate lifetime predictions utilizing historical data. Moreover, this paper details an algorithm that not only computes cumulative damage but also synthesizes these data into a comprehensive aggregated lifetime metric. This methodology can enhance the maintenance scheduling strategies and operational reliability of semiconductor devices in critical applications, ultimately extending their service life while optimizing performance.

hardware-in-the-loop (HIL)↗

Metabolomic profiles are reflective of hypoxia-induced insulin resistance during exercise in healthy young adult males

Hypoxia-induced insulin resistance appears to suppress exogenous glucose oxidation during metabolically matched aerobic exercise during acute (<8 h) high-altitude (HA) exposure. However, a better understanding of this metabolic dysregulation is needed to identify interventions to mitigate these effects. The objective of this study was to determine if differences in metabolomic profiles during exercise at sea level (SL) and HA are reflective of hypoxia-induced insulin resistance. Native lowlanders ( n = 8 males) consumed 145 g (1.8 g/min) of glucose while performing 80-min of metabolically matched treadmill exercise at SL (757 mmHg) and HA (460 mmHg) after 5-h exposure. Exogenous glucose oxidation and glucose turnover were determined using indirect calorimetry and dual tracer technique ([ 13 C]glucose and [6,6- 2 H 2 ]glucose). Metabolite profiles were analyzed in serum as change (Δ), calculated by subtracting postprandial/exercised state SL (ΔSL) and HA (ΔHA) from fasted, rested conditions at SL. Compared with SL, exogenous glucose oxidation, glucose rate of disappearance, and glucose metabolic clearance rate (MCR) were lower ( P < 0.05) during exercise at HA. One hundred and eighteen metabolites differed between ΔSL and ΔHA ( P < 0.05, Q < 0.10). Differences in metabolites indicated increased glycolysis, tricarboxylic acid cycle, amino acid catabolism, oxidative stress, and fatty acid storage, and decreased fatty acid mobilization for ΔHA. Branched-chain amino acids and oxidative stress metabolites, Δ3-methyl-2-oxobutyrate ( r = -0.738) and Δγ-glutamylalanine ( r = -0.810), were inversely associated ( P < 0.05) with Δexogenous glucose oxidation. Δ3-Hydroxyisobutyrate ( r = -0.762) and Δ2-hydroxybutyrate/2-hydroxyisobutyrate ( r = -0.738) were inversely associated ( P < 0.05) with glucose MCR. Coupling global metabolomics and glucose kinetic data suggest that the underlying cause for diminished exogenous glucose oxidative capacity during aerobic exercise is acute hypoxia-mediated peripheral insulin resistance.

59 BASIC BIOLOGICAL SCIENCES↗

Modeling and Analysis of FCM UN TRISO Fuel Using the PARFUME Code

The PARFUME (PARticle FUel ModEl) modeling code was used to assess the overall fuel performance of uranium nitride (UN) tri-structural isotropic (TRISO) ceramic fuel in the frame of the design and development of Fully Ceramic Matrix (FCM) fuel. A specific modeling of a TRISO particle with UN kernel was developed with PARFUME, and its behavior was assessed in irradiation conditions typical of a Light Water Reactor (LWR). The calculations were used to access the dimensional changes of the fuel particle layers and kernel, including the formation of an internal gap. The survivability of the UN TRISO particle was estimated depending on the strain behavior of the constituent materials at high fast fluence and burn-up. For nominal cases, internal gas pressure and representative thermal profiles across the kernel and layers were determined along with stress levels in the pyrolytic carbon (PyC) and silicon carbide (SiC) layers. These parameters were then used to evaluate fuel particle failure probabilities. Results of the study show that the survivability of UN TRISO fuel under LWR irradiation conditions might only be guaranteed if the kernel and PyC swelling rates are limited at high fast fluence and burn-up. These material properties are unknown at the irradiation levels expected to be reached by UN TRISO fuel in LWRs. Therefore, more effort is needed to determine them and positively conclude on the applicability of FCM fuel to LWRs.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Operating Stresses and Their Effects on Degradation of LSM-Based SOFC Cathodes

The performance of solid oxides fuel cells (SOFCs) with four different Mn excess of lanthanum strontium manganite (LSM) -based cathodes were examined under different temperatures (1,000 °C, 900 °C), current densities (0, 380, and 760 mA cm -2 ), and cathode atmospheres (p O 2 )=0.1,0.15,0.21) for durations ranging from 58 to 1,008 h. Each yttria-stabilized zirconia (YSZ) electrolyte-supported “button” cell had a porous Ni/YSZ composite anode and a porous LSM/YSZ composite cathode. The cells’ output voltage versus time were recorded and electrochemical impedance spectroscopy (EIS) and linear sweep voltammetry (LSV) measurements were performed every 24 hours. The total area specific resistance (ASR) was calculated from these measurements. The values of ASR from both EIS and LSV were comparable between each other but lower than that from durability test. Distribution of relaxation times (DRT) analysis was performed to investigate the electrochemical processes and their corresponding relaxation frequencies as well as their attributions to the total ASR. The series resistance and parallel resistance that obtained from the equivalent circuit fit of the Nyquist plot were higher at low temperature and low p O 2 regardless of LSM compositions. The area of the peaks derived from DRT analysis increased with time during individual tests. The microstructures of the tested cells were examined using scanning electron microscopy and energy-dispersive x-ray spectroscopy (SEM/EDS). Manganese oxide particles were observed near the cathode-electrolyte interface after prolonged (1,008 h) testing in air of a cell with LSM of 11% manganese excess, and after a short test (58 h) under low oxygen (p O 2 = 0.10) in a cell with LSM of 5% manganese excess. However, the role of MnOx in cell degradation is still unknown.

08 HYDROGEN↗

Atomistic clustering-ordering and high-strain deformation of an Al 0.1 CrCoFeNi high-entropy alloy

Here, computational investigations of structural, chemical, and deformation behavior in high-entropy alloys (HEAs), which possess notable mechanical strength, have been limited due to the absence of applicable force fields. To extend investigations, we propose a set of intermolecular potential parameters for a quinary Al-Cr-Co-Fe-Ni alloy, using the available ternary Embedded Atom Method and Lennard-Jones potential in classical molecular-dynamics simulations. The simulation results are validated by a comparison to first-principles Korringa-Kohn-Rostoker (KKR) - Coherent Potential Approximation (CPA) [KKR-CPA] calculations for the HEA structural properties (lattice constants and bulk moduli), relative stability, pair probabilities, and high-temperature short-range ordering. The simulation (MD)-derived properties are in quantitative agreement with KKR-CPA calculations (first-principles) and experiments. We study Al x CrCoFeNi for Al ranging from 0 ≤ x ≤2 mole fractions, and find that the HEA shows large chemical clustering over a wide temperature range for x < 0.5. At various temperatures high-strain compression promotes atomistic rearrangements in Al 0.1 CrCoFeNi, resulting in a clustering-to-ordering transition that is absent for tensile loading. Large fluctuations under stress, and at higher temperatures, are attributed to the thermo-plastic instability in Al 0.1 CrCoFeNi.

36 MATERIALS SCIENCE↗

Behavior of nanoporous thermal barrier coatings under cyclic thermal loading. Computer-aided simulation

The work presents the development of new algorithms for calculating the fraction of thermal energy dissipated during the irradiation on the inner surface of pores. On the basis of these algorithms, the simulation of heat transfer in three-layered systems was carried out taking into account the dissipation of thermal energy in specimens having different porosity. We have performed quantitative estimates of the portion of dissipating thermal energy and its influence on the distribution of thermal stresses in thermal barrier coating systems. It was demonstrated that the presence of pores with a large internal surface area in the intermediate layer material enables two-fold decrease of the internal thermal stresses.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Shear spectral sum rule in a nonconformal gravity dual

A sum rule which relates a stress-energy tensor correlator to thermodynamic functions is examined within the context of a simple nonconformal gravity dual. Such a sum rule was previously derived using AdS/CFT for conformal N=4 supersymmetric Yang-Mills theory, but we show that it does not generalize to the nonconformal theory under consideration. We provide a generalized sum rule and numerically verify its validity. A useful by-product of the calculation is the computation of the spectral density in a strongly coupled nonconformal theory. Qualitative features of the spectral densities and implications for lattice measurements of transport coefficients are discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Microstructure, mechanical properties and texture evolution of AZ31 alloy containing trace levels of strontium

The effect of low levels of Sr (0.01, 0.03, 0.05 wt.%) on the microstructure, mechanical properties and texture of AZ31 magnesium alloy has been investigated. Thermodynamic modeling has been used to study the effect of Sr on phase precipitation at different temperatures. Cooling curve analysis reveals a decrease in solidification superheat with the addition of 0.03 wt.% Sr to AZ31. The as-cast microstructures of the alloys have been studied using optical microscopy (OM) and electron probe micro analysis (EPMA). Results show the refining effect of Sr on the grain size and on the {beta}-Mg{sub 17}Al{sub 12} precipitates through growth poisoning and inoculation, respectively. To investigate the mechanical properties of the alloys, as-cast samples were compression tested at elevated temperatures. Hot compression peak stress ({sigma}{sub max}) and critical strain before recrystallization ({epsilon}{sub c}) initially drop but then increase. {sigma}{sub max} first decreases due to the depletion of Al from solid solution and then increases when the amount of the Al-Sr precipitates reach a significant amount. {epsilon}{sub c} drops due to the acceleration of dynamic recrystallization kinetics as a result of grain refinement. It increases with increasing Sr when the concentration Sr in solid solution is increased leading to dislocation pinning and retardation of recrystallization. X-ray texture measurements on the hot compressed and extruded samples show a decrease in maximum intensity of the basal pole figures with increasing Sr as a result of reduced twining and the changes in Al and Sr concentrations in solid solution. - Research Highlights: {yields} Microstructures/precipitates of AZ31+trace levels of Sr were examined by OM and EPMA. {yields} Thermodynamic calculations and cooling curve analysis were used to predict ppt formation. {yields} It has been shown that Sr refines the grains and Mg17Al12 precipitates. {yields} Mechanical properties and texture were studied using hot compression and X-ray diffraction. {yields} Different micro-mechanisms were responsible for mechanical and texture changes.

36 MATERIALS SCIENCE↗

Temperature Fields in Soft Tissue during LPUS Treatment: Numerical Prediction and Experiment Results

Recent research has shown that beneficial therapeutic effects in soft tissues can be induced by the low power ultrasound (LPUS). For example, increasing of cells immunity to stress (among others thermal stress) can be obtained through the enhanced heat shock proteins (Hsp) expression induced by the low intensity ultrasound. The possibility to control the Hsp expression enhancement in soft tissues in vivo stimulated by ultrasound can be the potential new therapeutic approach to the neurodegenerative diseases which utilizes the known feature of cells to increase their immunity to stresses through the Hsp expression enhancement. The controlling of the Hsp expression enhancement by adjusting of exposure level to ultrasound energy would allow to evaluate and optimize the ultrasound-mediated treatment efficiency. Ultrasonic regimes are controlled by adjusting the pulsed ultrasound waves intensity, frequency, duration, duty cycle and exposure time. Our objective was to develop the numerical model capable of predicting in space and time temperature fields induced by a circular focused transducer generating tone bursts in multilayer nonlinear attenuating media and to compare the numerically calculated results with the experimental data in vitro. The acoustic pressure field in multilayer biological media was calculated using our original numerical solver. For prediction of temperature fields the Pennes' bio-heat transfer equation was employed. Temperature field measurements in vitro were carried out in a fresh rat liver using the 15 mm diameter, 25 mm focal length and 2 MHz central frequency transducer generating tone bursts with the spatial peak temporal average acoustic intensity varied between 0.325 and 1.95 W/cm{sup 2}, duration varied from 20 to 500 cycles at the same 20% duty cycle and the exposure time varied up to 20 minutes. The measurement data were compared with numerical simulation results obtained under experimental boundary conditions. Good agreement between the theoretical and measurement results for all cases considered has verified the validity and accuracy of our numerical model. Quantitative analysis of the obtained results enabled to find how the ultrasound-induced temperature rises in the rat liver could be controlled by adjusting the source parameters and exposure time.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Dielectric breakdown field of strained silicon under hydrostatic pressure

First-principles density functional theory calculations are used to reveal a quantitative relationship between the dielectric breakdown field and hydrostatic pressure of crystalline Si. The electronic band structure, phonon dispersion, and electron scattering rate are computed for pressures from 62.2 kbar (compressive) to -45.6 kbar (tensile) to estimate the rate of kinetic energy gain and loss for the electron. The theoretical dielectric breakdown fields are then determined using the von Hippel–Fröhlich criterion. Compressive stresses lead to a lower breakdown field, while significant increases in the dielectric breakdown field can be achieved by tensile stresses. Strain engineering in Si technology enables efficient control of hole and electron mobilities without changing the chemical composition or making structural modifications to achieve the target performance of microelectronic applications. Under certain stress conditions, however, Si experiences a narrowing of the bandgap, leading to an increase in leakage current, or a reduction in the dielectric breakdown field, leading to a device less endurable under high electric fields. As applications rapidly scale down, these disadvantages become critical. A clear understanding of the relationship between strain and dielectric breakdown behaviors becomes useful.

36 MATERIALS SCIENCE↗

AdS{sub 5} solutions in Einstein-Yang-Mills-Chern-Simons theory

We investigate static, spherically symmetric solutions of an Einstein-Yang-Mills-Chern-Simons system with negative cosmological constant, for an SO(6) gauge group. For a particular value of the Chern-Simons coefficient, this model can be viewed as a truncation of the five-dimensional maximal gauged supergravity and we expect that the basic properties of the solutions in the full model to persist in this truncation. Both globally regular, particlelike solutions and black holes are considered. In contrast with the Abelian case, the contribution of the Chern-Simons term is nontrivial already in the static, spherically symmetric limit. We find two types of solutions: the generic configurations whose magnetic gauge field does not vanish fast enough at infinity (although the spacetime is asymptotically AdS), whose mass function is divergent, and the special configurations, whose existence depends on the Chern-Simons term, which are endowed with finite mass. In the case of the generic configurations, we argue that the divergent mass implies a nonvanishing trace for the stress tensor of the dual d=4 theory.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Solute-dislocation interaction in Mg from first-principles: and twinning dislocations with flexible boundary conditions

We relax the cores of $\langle c+a \rangle$ edge and screw dislocations, and $(10\overline{1}2)$ and $(10\overline{1}1)$ twinning dislocations in Mg using first-principles calculations with flexible boundary conditions (FBC). FBC couple highly distorted cores to a harmonic lattice through lattice Green functions (LGF), allowing dislocations to relax as isolated defects. Unlike previous FBC calculations using bulk LGFs, we use LGFs specifically for dislocated geometries. The optimized geometries provide sites for computing solute-dislocation interactions via direct substitution, as well as local strain and slip for input to computationally efficient geometric solute interaction models. The interactions are inputs for solid-solution strengthening models. We compute interactions between Al, Ca, Mn, Sn, and Zn and the dislocations, and predict corresponding changes in stress for dislocation motion. We compare the strengthening of each of these non-basal deformation modes to basal strengthening and examine implications for ductility in Mg alloys. Funding from DOE-USAMP Cooperative Agreement Number DE-EE0007756.

36 MATERIALS SCIENCE↗

Guidelines for the formulation of Lagrangian stochastic models for particle simulations of single-phase and dispersed two-phase turbulent flows

In this paper, we establish a set of criteria which are applied to discuss various formulations under which Lagrangian stochastic models can be found. These models are used for the simulation of fluid particles in single-phase turbulence as well as for the fluid seen by discrete particles in dispersed turbulent two-phase flows. The purpose of the present work is to provide guidelines, useful for experts and non-experts alike, which are shown to be helpful to clarify issues related to the form of Lagrangian stochastic models. A central issue is to put forward reliable requirements which must be met by Lagrangian stochastic models and a new element brought by the present analysis is to address the single- and two-phase flow situations from a unified point of view. For that purpose, we consider first the single-phase flow case and check whether models are fully consistent with the structure of the Reynolds-stress models. In the two-phase flow situation, coming up with clear-cut criteria is more difficult and the present choice is to require that the single-phase situation be well-retrieved in the fluid-limit case, elementary predictive abilities be respected and that some simple statistical features of homogeneous fluid turbulence be correctly reproduced. This analysis does not address the question of the relative predictive capacities of different models but concentrates on their formulation since advantages and disadvantages of different formulations are not always clear. Indeed, hidden in the changes from one structure to another are some possible pitfalls which can lead to flaws in the construction of practical models and to physically unsound numerical calculations. A first interest of the present approach is illustrated by considering some models proposed in the literature and by showing that these criteria help to assess whether these Lagrangian stochastic models can be regarded as acceptable descriptions. A second interest is to indicate how future developments can be safely built, which is also relevant for stochastic subgrid models for particle-laden flows in the context of Large Eddy Simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Temperature response surfaces for mortality risk of tree species with future drought

Widespread, high levels of tree mortality, termed forest die-off, associated with drought and rising temperatures, are disrupting forests worldwide. Drought will likely become more frequent with climate change, but even without more frequent drought, higher temperatures can exacerbate tree water stress. The temperature sensitivity of drought-induced mortality of tree species has been evaluated experimentally for only single-step changes in temperature (ambient compared to ambient + increase) rather than as a response surface (multiple levels of temperature increase), which constrains our ability to relate changes in the driver with the biological response. Here we show that time-to-mortality during drought for seedlings of two western United States tree species, Pinus edulis (Engelm.) and Pinus ponderosa (Douglas ex C. Lawson), declined in continuous proportion with increasing temperature spanning a 7.7 °C increase. Although P. edulis outlived P. ponderosa at all temperatures, both species had similar relative declines in time-to-mortality as temperature increased (5.2% per °C for P. edulis; 5.8% per °C for P. ponderosa). When combined with the non-linear frequency distribution of drought duration—many more short droughts than long droughts—these findings point to a progressive increase in mortality events with global change due to warming alone and independent of additional changes in future drought frequency distributions. As such, dire future forest recruitment patterns are projected assuming the calculated 7–9 seedling mortality events per species by 2100 under business-as-usual warming occur, congruent with additional vulnerability predicted for adult trees from stressors like pathogens and pests. Our progressive projection for increased mortality events was driven primarily by the non-linear shape of the drought duration frequency distribution, a common climate feature of drought-affected regions. These results illustrate profound benefits for reducing emissions of carbon to the atmosphere from anthropogenic sources and slowing warming as rapidly as possible to maximize forest persistence.

54 ENVIRONMENTAL SCIENCES↗

Influence of Alloying Elements and Effect of Stress on Anisotropic Hydrogen Diffusion in Zr-Based Alloys Predicted by Accelerated Kinetic Monte Carlo Simulations

The formation of hydrides degrades the toughness of Zr-based claddings, and thus is one of the primary concerns regarding cladding integrity during fuel operation and used fuel storage. However, the formation mechanism of hydrides, particularly the nucleation mechanism, is yet to be fully understood. To explore the nucleation process, atomic scale studies including density functional theory, molecular dynamics and kinetic Monte Carlo have been used to investigate H diffusion, segregation, and the possible nucleation paths of hydrides. Here, density functional theory calculations are used to parameterize a kinetic Monte Carlo model, which can accurately predict the effective H diffusivity in various Zr-based claddings including Zircaloy, Zirlo and Zr-2.5Nb. Assisted by density functional theory calculations, a recently developed charge-optimized-many-body potential is further improved and used to investigate the possible nucleation paths of hydrides. It’s shown that the formation of face-centered hydrides starts with coherent zeta-phase, shearing of which in the basal plane changes the hcp stacking into fcc and leads to the formation of gamma-hydride nuclei. The shearing involves a negligible barrier and negligible strain accumulation in the matrix by adopting three equivalent shear partials. The results obtained at the atomic scale are consistent with previous theory and experiments, and improves the current understanding on how and how fast hydride forms in Zr based cladding.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

ON THE PENETRATION OF MERIDIONAL CIRCULATION BELOW THE SOLAR CONVECTION ZONE. II. MODELS WITH CONVECTION ZONE, THE TAYLOR-PROUDMAN CONSTRAINT, AND APPLICATIONS TO OTHER STARS

The solar convection zone exhibits a strong level of differential rotation, whereby the rotation period of the polar regions is about 25%-30% longer than the equatorial regions. The Coriolis force associated with these zonal flows perpetually 'pumps' the convection zone fluid, and maintains a quasi-steady circulation, poleward near the surface. What is the influence of this meridional circulation on the underlying radiative zone, and in particular, does it provide a significant source of mixing between the two regions? In Paper I, we began to study this question by assuming a fixed meridional flow pattern in the convection zone and calculating its penetration depth into the radiative zone. We found that the amount of mixing caused depends very sensitively on the assumed flow structure near the radiative-convective interface. We continue this hydrodynamic study here by including a simple model for the convection zone 'pump', and calculating in a self-consistent manner the meridional flows generated in the whole Sun. We find that the global circulation timescale depends in a crucial way on two factors: the overall stratification of the radiative zone as measured by the square root of the Prandtl number times the ratio of the Brunt-Vaeisaelae frequency to the rotation rate, and, for weakly stratified systems, the presence or absence of stresses within the radiative zone capable of breaking the Taylor-Proudman constraint. We conclude by discussing the consequences of our findings for the solar interior and argue that a potentially important mechanism for mixing in young main-sequence stars has so far been neglected.

79 ASTRONOMY AND ASTROPHYSICS↗

Precision calculations of the gravitational wave background spectrum from inflation

The spectrum of the gravitational wave background originating from quantum fluctuations during inflation is calculated numerically for various inflation models over a wide range of frequencies. We take into account four ingredients: the scalar field dynamics during inflation making no use of the slow-roll approximation, the fermionic decay of the scalar field with a small coupling constant during the reheating process, the change of the effective number of degrees of freedom g{sub *} in the radiation-dominated era, and the anisotropic stress of free-streaming neutrinos. By numerically solving the evolution of gravitational waves during and after inflation up to the present, all of these effects can be examined comprehensively and accurately over a broad spectrum, even at very high frequencies. We find that the spectrum shows (i) a large deviation from the spectrum less accurate obtained by Taylor expanding around the CMB scale using the slow-roll approximation, (ii) a characteristic frequency dependence due to the reheating effect, and (iii) damping due to the g{sub *} changes and the neutrino anisotropic stress. We suggest that future analysis of the gravitational wave background should take into consideration the fact that analytical estimates using the Taylor expansion overestimate the amplitude of the spectrum.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗