Search NASA⌕ Search

SEARCH · Search NASA

Results for “Scanning electron microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Chemical Effect of Dry and Wet Cleaning of the Ru Protective Layer of the Extreme ultraviolet (EUV) Lithography Reflector

The authors report the chemical influence of cleaning of the Ru capping layer on the extreme ultraviolet (EUV) reflector surface. The cleaning of EUV reflector to remove the contamination particles has two requirements: to prevent corrosion and etching of the reflector surface and to maintain the reflectivity functionality of the reflector after the corrosive cleaning processes. Two main approaches for EUV reflector cleaning, wet chemical treatments [sulfuric acid and hydrogen peroxide mixture (SPM), ozonated water, and ozonated hydrogen peroxide] and dry cleaning (oxygen plasma and UV/ozone treatment), were tested. The changes in surface morphology and roughness were characterized using scanning electron microscopy and atomic force microscopy, while the surface etching and change of oxidation states were probed with x-ray photoelectron spectroscopy. Significant surface oxidation of the Ru capping layer was observed after oxygen plasma and UV/ozone treatment, while the oxidation is unnoticeable after SPM treatment. Based on these surface studies, the authors found that SPM treatment exhibits the minimal corrosive interactions with Ru capping layer. They address the molecular mechanism of corrosive gas and liquid-phase chemical interaction with the surface of Ru capping layer on the EUV reflector.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Corrosion Behavior of Plasma-Nitrided 904L Austenitic Stainless Steel in Hydrofluoric Acid

A new type of high-chromium nickel molybdenum super austenitic stainless steel, 904L, has excellent corrosion resistance in acidic environments. However, the service life of 904L decreases significantly in a mixed acid system that includes hydrogen fluoride and sulfuric acid. In this article, different plasma nitriding processes were used to modify the surface of 904L stainless steel. X-ray diffraction was used to analyze the phase composition after nitriding; scanning electron microscopy and atomic force microscopy were used to examine the surface morphology after nitriding; electrochemical noise and electrochemical methods were used to study the localized corrosion behavior and the damage mechanism of the ion nitride layer; and the effect of the plasma nitride layer on the corrosion resistance was explored. The results show that with increasing nitriding time, the thickness of the nitride layer increased. Ion nitriding resulted in the coarsening of the 904L austenitic stainless steel surface. A long nitriding treatment time resulted in the precipitation of CrN in the modified layer, depleting the chromium from the matrix and remarkably reducing the corrosion resistance.

36 MATERIALS SCIENCE↗

Solvothermal synthesis and luminescent properties of monodisperse LaPO{sub 4}:Ln (Ln=Eu{sup 3+}, Ce{sup 3+}, Tb{sup 3+}) particles

Monodisperse rare-earth ion (Eu{sup 3+}, Ce{sup 3+}, Tb{sup 3+}) doped LaPO{sub 4} particles with oval morphology were successfully prepared through a facile solvothermal process without further heat treatment. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), Fourier transform infrared spectroscopy (FT-IR), photoluminescence (PL) spectra and the kinetic decays were performed to characterize these samples. The XRD results reveal that all the doped samples are well crystalline at 180 deg. C and assigned to the monoclinic monazite-type structure of the LaPO{sub 4} phase. It has been shown that all the as-synthesized samples show perfectly oval morphology with narrow size distribution. The possible growth mechanism of the LaPO{sub 4}:Ln has been investigated as well. Upon excitation by ultraviolet radiation, the LaPO{sub 4}:Eu{sup 3+} phosphors show the characteristic {sup 5}D{sub 0}-{sup 7}F{sub 1-4} emission lines of Eu{sup 3+}, while the LaPO{sub 4}:Ce{sup 3+}, Tb{sup 3+} phosphors demonstrate the characteristic {sup 5}D{sub 4}-{sup 7}F{sub 3-6} emission lines of Tb{sup 3+}. - Graphical abstract: Monodisperse rare-earth ion (Eu{sup 3+}, Ce{sup 3+}, Tb{sup 3+}) doped LaPO{sub 4} phosphors with monazite-type structure and uniform oval morphology and strong emission intensity have been prepared through a facile solvothermal process.

36 MATERIALS SCIENCE↗

An efficient synthesis of nanocrystalline MFI zeolite using different silica sources: A green approach

Nanocrystalline MFI zeolite was synthesized with a very broad range of silica to alumina ratios using an autoclave for periods of 7 h at 473 K under autogeneous pressure without seeding gel, promoter, organic solvent or sulfuric acid. The procedure has been successfully employed for the synthesis of MFI samples using fumed silica, colloidal silica, aerosil and tetraethylorthosilicate as silica sources. The synthesized samples were characterized by different techniques such as X-ray diffraction, Fourier transform infrared spectroscopy, Scanning electron microscopy. Their average crystallite size ranges from about 26 to 55 nm and they exhibit high crystallinity.

36 MATERIALS SCIENCE↗

Regular Microstructures Based on Polyethylene Terephthalate Films

A method for forming regular dielectric and metallic microstructures based on polyethylene terephthalate films irradiated with a synchrotron radiation source through a mask with subsequent etching. To study their geometric parameters, scanning electron microscopy was used.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Encapsulation of caesium-loaded Ionsiv in cement

The microporous material Ionsiv is used for {sup 137}Cs removal from aqueous nuclear waste streams. In the UK, Cs-loaded Ionsiv is classed as an intermediate-level waste; no sentencing and disposal route is yet defined for this material and it is currently held in safe interim storage on several nuclear sites. In this study, the suitability of fly ash and blast furnace slag blended cements for encapsulation of Cs-Ionsiv in a monolithic wasteform was investigated. No evidence of reaction or dissolution of the Cs-Ionsiv in the cementitious environment was found by scanning electron microscopy and X-ray diffraction. However, a small fraction ({<=} 1.6 wt.%) of the Cs inventory was released from the encapsulated Ionsiv during leaching experiments carried out on hydrated samples. Furthermore, it was evident that K and Na present in the cementitious pore water exchanged with Cs and H in the Ionsiv. Therefore, cement systems lower in K and Na, such as slag based cements, showed lower Cs release than the fly ash based cements.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Use of Brazilian sugarcane bagasse ash in concrete as sand replacement

Sugarcane today plays a major role in the worldwide economy, and Brazil is the leading producer of sugar and alcohol, which are important international commodities. The production process generates bagasse as a waste, which is used as fuel to stoke boilers that produce steam for electricity cogeneration. The final product of this burning is residual sugarcane bagasse ash (SBA), which is normally used as fertilizer in sugarcane plantations. Ash stands out among agroindustrial wastes because it results from energy generating processes. Many types of ash do not have hydraulic or pozzolanic reactivity, but can be used in civil construction as inert materials. The present study used ash collected from four sugar mills in the region of Sao Carlos, SP, Brazil, which is one of the world's largest producers of sugarcane. The ash samples were subjected to chemical characterization, sieve analysis, determination of specific gravity, X-ray diffraction, scanning electron microscopy, and solubilization and leaching tests. Mortars and concretes with SBA as sand replacement were produced and tests were carried out: compressive strength, tensile strength and elastic modulus. The results indicated that the SBA samples presented physical properties similar to those of natural sand. Several heavy metals were found in the SBA samples, indicating the need to restrict its use as a fertilizer. The mortars produced with SBA in place of sand showed better mechanical results than the reference samples. SBA can be used as a partial substitute of sand in concretes made with cement slag-modified Portland cement.

09 BIOMASS FUELS↗

1-Dodecane-sulfonic-acid-sodium-salt(LAS) assisted hydrothermal synthesis of Cd{sub x}Zn{sub 1-x}S solid solution as efficient photocatalysts under visible light irradiation

With anionic surfactant LAS assisted, series of zinc cadmium sulfide semiconductor photocatalysts were synthesized by hydrothermal method. These products were characterized by X-ray diffraction (XRD), UV-Vis absorption spectra (UV-Vis) and scanning electron microscopy (FESEM). The photocatalytic activities of as-prepared samples were evaluated by photocatalytic hydrogen production from water under visible-light irradiation. The best synthesis parameters are: Composition 0.9:0.1 (Cd:Zn molar ratio), Temperature 160 deg. C, Hydrothermal Time 48 Hour, LAS Concentration 1.7 mmol/L, the maximum visible-light-catalytic hydrogen production rate is 161.25 {mu}mol/h (lambda>430 nm) which is higher than those of by coprecipitation method. The experiment results indicate that surfactant assisted hydrothermal method is an effective way to get highly active CdZnS solid solution photocatalyst.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of MnC{sub 2}O{sub 4} microadditives on combustion characteristics of CuO/Al nanoenergetics

In this work, we have investigated the catalytic effect of MnC{sub 2}O{sub 4} microrods on combustion characteristics of CuO/nAl nanoenergetic composites. CuO nanorods were prepared by solid state synthesis method using the nonionic surfactant of poly(ethylene)glycol of molecular weight 400 (PEG400). The crystal information and microstructure of CuO/nAl nanoenergetics were studied by X-ray diffractometry and Transmission Electron microscopy. Microrods shaped manganese oxalate (MnC{sub 2}O{sub 4}) were fabricated by using mild thermal precipitation and aging process and confirmed by energy dispersive X-ray spectroscopy (EDS). The microstructures of MnC{sub 2}O{sub 4} microrods and the nanoenergetic composites of CuO/nAl/MnC{sub 2}O{sub 4} were characterized by Field emission scanning electron microscopy (FE-SEM) imaging. The addition of MnC{sub 2}O{sub 4} microrods has demonstrated a significant enhancement in dynamic pressure-time characteristics of CuO/nAl nanoenergetics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of Thermal Annealing in Ammonia on the Properties of InGaN Nanowires with Different Indium Concentrations

The utility of an annealing procedure in ammonia ambient is investigated for improving the optical characteristics of InxGa1?xN nanowires (0.07 ≤ x ≤ 0.42) grown on c-Al2O3 using a halide chemical vapor deposition method. Morphological studies using scanning electron microscopy confirm that the nanowire morphology is retained after annealing in ammonia at temperatures up to 800 ?C. However, significant indium etching and composition inhomogeneities are observed for higher indium composition nanowires (x = 0.28, 0.42), as measured by energy-dispersive X-ray spectroscopy and Z-contrast scanning transmission electron microscopy. Structural analyses, using X-ray diffraction and high-resolution transmission electron microscopy, indicate that this is a result of the greater thermal instability of higher indium composition nanowires. The effect of these structural changes on the optical quality of InGaN nanowires is examined using steady-state and time-resolved photoluminescence measurements. Annealing in ammonia enhances the integrated photoluminescence intensity of InxGa1?xN nanowires by up to a factor of 4.11 ? 0.03 (for x = 0.42) by increasing the rate of radiative recombination. Fitting of photoluminescence decay curves to a Kohlrausch stretched exponential indicates that this increase is directly related to a larger distribution of recombination rates from composition inhomogeneities caused by annealing. The results demonstrate the role of thermal instability on the improved optical properties of InGaN nanowires annealed in ammonia.

36 MATERIALS SCIENCE↗

Effect of Thermal Annealing in Ammonia on the Properties of InGaN Nanowires with Different Indium Concentrations

The utility of an annealing procedure in ammonia ambient is investigated for improving the optical characteristics of InxGa1?xN nanowires (0.07 ≤ x ≤ 0.42) grown on c-Al2O3 using a halide chemical vapor deposition method. Morphological studies using scanning electron microscopy confirm that the nanowire morphology is retained after annealing in ammonia at temperatures up to 800 ?C. However, significant indium etching and composition inhomogeneities are observed for higher indium composition nanowires (x = 0.28, 0.42), as measured by energy-dispersive X-ray spectroscopy and Z-contrast scanning transmission electron microscopy. Structural analyses, using X-ray diffraction and high-resolution transmission electron microscopy, indicate that this is a result of the greater thermal instability of higher indium composition nanowires. The effect of these structural changes on the optical quality of InGaN nanowires is examined using steady-state and time-resolved photoluminescence measurements. Annealing in ammonia enhances the integrated photoluminescence intensity of InxGa1?xN nanowires by up to a factor of 4.11 ? 0.03 (for x = 0.42) by increasing the rate of radiative recombination. Fitting of photoluminescence decay curves to a Kohlrausch stretched exponential indicates that this increase is directly related to a larger distribution of recombination rates from composition inhomogeneities caused by annealing. The results demonstrate the role of thermal instability on the improved optical properties of InGaN nanowires annealed in ammonia.

36 MATERIALS SCIENCE↗

Facile synthesis of Cu{sub 2}O nanocube/polycarbazole composites and their high visible-light photocatalytic properties

Cu{sub 2}O nanocube/polycarbazole composites have been prepared by an one-pot solvothermal process using carbazole as a reductant. The polycarbazole layer not only protected and stabilized Cu{sub 2}O particles, but also prohibited the recombination of photogenerated electrons-holes pair and facilitated interfacial charge transfer between polycarbazole and Cu{sub 2}O. The composition, structure and morphology of the obtained products was systematically studied by X-ray powder diffraction (XRD), Field-emission scanning electron microscopy (FE-SEM), High-resolution transmission electron microscopy (HRTEM), Fourier transformation infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS) and UV-visible spectrophotometer. Furthermore, the visible-light photocatalytic behavior of the Cu{sub 2}O nanocube/polycarbazole composites on the methyl orange was investigated. - Graphical abstract: The uniform and monodisperse Cu{sub 2}O nanocube/polycarbazole composites were prepared by an one-pot solvothermal process. As covered by polycarbazole, the photocatalytic activities of Cu{sub 2}O nanocubes were improved. The polycarbazole not only protected and stabilized Cu{sub 2}O cubes, but also prohibited the recombination of photogenerated electrons-holes pair and facilitated interfacial charge transfer between polycarbazole and Cu{sub 2}O. Highlights: > The Cu{sub 2}O/polycarbazole nanocube composite has a better photocatalytic activity. > We obtained the composite by an one-pot solvothermal process. > Carbazole monomers as reductants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic and magnetotransport properties of arrays of nanostructured antidots obtained by self-assembling polystyrene nanosphere lithography

A well-ordered nanopatterned structure has been obtained in sputtered magnetic thin films by self-assembling of polystyrene nanospheres. Arrays of holes in Co, Ni, and Ni{sub 80}Fe{sub 20} films having a mean size ranging in the interval of 200-400 nm depending on the experimental condition have been prepared. Sample microstructure has been studied by scanning electron microscopy and atomic force microscopy. Room-temperature hysteresis loops have been measured in the parallel and perpendicular configuration (H{sub max}=20 kOe). Magnetoresistance (MR) measurements have been performed by means of a standard four-contact technique at several angles between the current and the magnetic field (H{sub max}=70 kOe) in the temperature interval of 4-200 K. An anisotropic MR effect has been observed in all compositions independent on the hole mean dimension. The role on magnetic and magnetotransport properties of either sample microstructure or composition has been studied in such patterned structures.

36 MATERIALS SCIENCE↗

Nanocrystalline sol-gel TiO{sub 2}-SnO{sub 2} coatings: Preparation, characterization and photo-catalytic performance

Highlights: Black-Right-Pointing-Pointer SnO{sub 2} additive enhanced significantly photo-catalytic properties of TiO{sub 2} based thin film for remove of organic compounds. Black-Right-Pointing-Pointer Structural and optical properties are dependent on dopant concentration. Black-Right-Pointing-Pointer TiO{sub 2}-SnO{sub 2} nanocrystalline thin film is promising for photocatalytic properties in visible light. -- Abstract: In this study, preparation of SnO{sub 2} (0-30 mol% SnO{sub 2})-TiO{sub 2} dip-coated thin films on glazed porcelain substrates via sol-gel process has been investigated. The effects of SnO{sub 2} on the structural, optical, and photo-catalytic properties of applied thin films have been studied by X-ray diffraction, Raman spectroscopy, and scanning electron microscopy. Surface topography and surface chemical state of thin films were examined by atomic force microscopy and X-ray photoelectron spectroscopy. XRD patterns showed an increase in peak intensities of the rutile crystalline phase by increasing the SnO{sub 2} content. The prepared Sn doped TiO{sub 2} photo-catalyst films showed optical absorption in the visible light area exhibited excellent photo-catalytic ability for the degradation of methylene blue under visible light irradiation. Best photo-catalytic activity of Sn doped TiO{sub 2} thin films was measured in the TiO{sub 2}-15 mol% SnO{sub 2} sample by the Sn{sup 4+} dopants presented substitution Ti{sup 4+} into the lattice of TiO{sub 2} increasing the surface oxygen vacancies and the surface hydroxyl groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microencapsulated n-octacosane as phase change material for thermal energy storage

This study deals with preparation and characterization of polymethylmetracrylate (PMMA) microcapsules containing n-octacosane as phase change material for thermal energy storage. The surface morphology, particle size and particle size distribution (PSD) were studied by scanning electron microscopy (SEM). The chemical characterization of PMMA/octacosane microcapsules was made by FT-IR spectroscopy method. Thermal properties and thermal stability of microencapsulated octacosane were determined using differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). The melting and freezing temperatures and the latent heats of the microencapsulated octacosane as PCM were measured as 50.6 and 53.2 C, 86.4 and -88.5 J/g, respectively, by DSC analysis. TGA analysis indicated that the microencapsulated octacosane degrade in two steps and had good chemical stability. Thermal cycling test shows that the microcapsules have good thermal reliability with respect to the accelerated thermal cycling. Based on the results, it can be considered that the microencapsulated octacosane have good energy storage potential. (author)

25 ENERGY STORAGE↗

Zinc Removal from Basic Oxygen Steelmaking Filter Cake by Leaching with Organic Acids

The dust generated from the basic oxygen steelmaking (BOS) process is a waste material mainly containing iron that cannot be recycled owing to its high zinc content. In this study, the leaching effects of different organic acids are compared, with the aim of determining an acid that selectively leaches and removes zinc from BOS dust, so that the waste material can be recycled into ironmaking and steelmaking processes in order to substitute part of the raw materials of steelmaking. The dust used in this study was scrubbed and collected in the form of a filter cake. The acids tested were oxalic, citric, acetic, propionic, butyric, and valeric acids. Butyric acid was found to be the most effective, with a high zinc extraction level of 49.7 pct and a low iron level of only 2.5 pct. Oxalic acid was the least effective leaching reagent for both zinc and iron extractions, owing to the formation of zinc and iron oxalate precipitates following metal dissolution. The filter cake and leached residues were characterized by chemical analysis, X-ray diffraction, X-ray photoelectron spectroscopy, and scanning electron microscopy with energy dispersive spectroscpopy.

36 MATERIALS SCIENCE↗

Rapid breakdown anodization technique for the synthesis of high aspect ratio and high surface area anatase TiO{sub 2} nanotube powders

Clusters of high aspect ratio, high surface area anatase-TiO{sub 2} nanotubes with a typical nanotube outer diameter of about 18 nm, wall thickness of approximately 5 nm and length of 5-10 {mu}m were synthesized, in powder form, by breakdown anodization of Ti foils in 0.1 M perchloric acid, at 10 V (299 K) and 20 V ({approx}275 and 299 K). The surface area, morphology, structure and band gap were determined from Brunauer Emmet Teller method, field emmission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Raman, photoluminescence and diffuse reflectance spectroscopic studies. The tubular morphology and anatase phase were found to be stable up to 773 K and above 773 K anatase phase gradually transformed to rutile phase with disintegration of tubular morphology. At 973 K, complete transformation to rutile phase and disintegration of tubular morphology were observed. The band gap of the as prepared and the annealed samples varied from 3.07 to 2.95 eV with increase in annealing temperature as inferred from photoluminescence and diffuse reflectance studies. -- Graphical abstract: Display Omitted Research highlights: {yields} High aspect ratio anatase-titania nanotube powders were synthesized electrochemically. {yields} The surface area of the nanotubes were much higher than those reported. {yields} The annealing temperature limit for maintaining tubular morphology was established. {yields} The photoluminiscence spectroscopy reflected the presence of defects, annealing of defects and phase transformation. {yields} The nanotubes were of {approx}5 nm wall thickness as revealed by TEM studies.

36 MATERIALS SCIENCE↗

Molecular design of nanometric zinc borate-containing polyimide as a route to flame retardant materials

Zinc borate (Zn{sub 2}B{sub 6}O{sub 11}.3H{sub 2}O) nanoparticles were successfully prepared by using an emulsion liquid membrane (W/O/W emulsion) to control the size of particles with Na{sub 2}B{sub 4}O{sub 7}.10H{sub 2}O, boric acid and ZnSO{sub 4}.7H{sub 2}O as raw materials. All materials were dispersed with the polyimide (PI) precursor, poly (amic acid). Using a combination of dissolving the poly (amic acid) and mixing fatty acid surfactant-coated zinc borate nanoparticles; we have demonstrated the formation of nanocomposites with uniform nanoparticles dispersion. We report the first deposition of nanocomposite polyimides from solution using spin-coating. The microstructures and morphology of the as-obtained samples were studied by X-ray diffraction (XRD), infrared spectra (IR), scanning electron microscopy (SEM) equipped with an energy-dispersive X-ray spectrometer (EDX), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA)

36 MATERIALS SCIENCE↗