Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Unified Stress-Strain Model for Plasticity to the Structural Instability

A unified model for the work hardening Θσ Θ(σ) and stress-strain σε σ(ε) behavior is presented that accounts for deformation under tensile loading, from the onset of yielding at the proportional limit up to the ultimate strength as defined at the structural instability. The origin of this approach is based on a negative exponential formulation for an asymptotic-curvilinear work-hardening model that accounts for the rapid strengthening of metals as well as the continuation of steady-state deformation to the instability.

36 MATERIALS SCIENCE↗

Formulation and calibration of two-dimensional constitutive models for composite structures based on panel tests

Steel Plate Concrete (SC) composite members have been widely adopted because of its cost-efficiency and enhanced structural behavior. While researchers have attempted to study its in-plane shear behavior in the past twenty years, very limited number of large-scale pure shear tests were performed due to the challenge of experimental set-up and the availability of facilities. In this paper, a series of uniaxial loading tests and two full-scale pure shear panel tests of SC members were reported, on which the “mechanics-based Membrane Model of SC elements (MM-SC)” is developed. The MM-SC model is based on the fixed-angle crack formulation and the smeared-crack formulation, in which the experimental-based uniaxial constitutive models are implemented, considering the local buckling of faceplate, the tension stiffening of steel plate, the strength degradation of cracked concrete and the confinement effect of concrete. The proposed MM-SC model is subsequently incorporated into the object-oriented software OpenSEES. Finally, the simulation results of proposed model well predict the SC test observations in terms of critical branch points and structural behaviors, including initial stiffness, cracking strength, post-crack stiffness, yield strength, maximum strength, and failure modes.

42 ENGINEERING↗

A stochastic structural stability theory model of the drift wave-zonal flow system

A remarkable phenomenon in turbulent flows is the spontaneous emergence of coherent large spatial scale zonal jets. In this work a comprehensive theory for the interaction of jets with turbulence, stochastic structural stability theory, is applied to the problem of understanding the formation and maintenance of the zonal jets that are crucial for enhancing plasma confinement in fusion devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

CHEMICAL EVOLUTION IN HIERARCHICAL MODELS OF COSMIC STRUCTURE. II. THE FORMATION OF THE MILKY WAY STELLAR HALO AND THE DISTRIBUTION OF THE OLDEST STARS

This paper presents theoretical star formation and chemical enrichment histories for the stellar halo of the Milky Way (MW) based on new chemodynamical modeling. The goal of this study is to assess the extent to which metal-poor stars in the halo reflect the star formation conditions that occurred in halo progenitor galaxies at high redshift, before, and during the epoch of re-ionization. Simple prescriptions that translate dark-matter (DM) halo mass into baryonic gas budgets and star formation histories yield models that resemble the observed MW halo in its total stellar mass, metallicity distribution, and the luminosity function and chemical enrichment of dwarf satellite galaxies. These model halos in turn allow an exploration of how the populations of interest for probing the epoch of re-ionization are distributed in physical and phase space, and of how they are related to lower-redshift populations of the same metallicity. The fraction of stars dating from before a particular time or redshift depends strongly on radius within the galaxy, reflecting the 'inside-out' growth of cold DM halos, and on metallicity, reflecting the general trend toward higher metallicity at later times. These results suggest that efforts to discover stars from z>6-10 should select for stars with [Fe/H] approx<-3 and favor stars on more tightly bound orbits in the stellar halo, where the majority are from z>10 and 15%-40% are from z>15. The oldest, most metal-poor stars-those most likely to reveal the chemical abundances of the first stars-are most common in the very center of the Galaxy's halo: they are in the bulge, but not of the bulge. These models have several implications for the larger project of constraining the properties of the first stars and galaxies using data from the local universe.

79 ASTRONOMY AND ASTROPHYSICS↗

q-Deformation of symplectic dynamical symmetries in algebraic models of nuclear structure

With a view toward further nuclear structure applications of approaches based on quantum-deformed (or q-deformed) algebras, introduced to the authors by Yu.F. Smirnov, we construct a q analog of a boson realization of the symplectic noncompact sp(4, R) algebra together with a q analog of a fermion realization of the symplectic compact sp(4) algebra. The first study, on the q-deformed Sp(4,R) symmetry, is applied to the development of a q analog of the two-dimensional Interacting Boson Model with q-deformed SU(3) the underpinning dynamical symmetry group. An explicit realization in terms of q-tensor operators with respect to the standard su{sub q}(2) algebra is given. The group-subgroup structure of this framework yields the physical interpretation of the generators of the groups under consideration. The second symplectic algebra, the q-deformed sp(4), is applied to studying isovector pairing correlations in atomic nuclei. A specific q deformation of the sp(4) algebra is realized in terms of q deformed fermion creation and annihilation operators of the shell model. The generators of the algebra close on four distinct realizations of the u{sub q}(2) subalgebra. These reductions, which correspond to different types of pairing interactions, yield a complete classification of the basis states. An analysis of the role of the q deformation is based on a comparison of the results for energies of the lowest isovector-paired 0{sup +} states in the deformed and nondeformed cases.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Improved Dielectric Solvation Model for Electronic Structure Calculations

This project was originally funded for the three year period from 09/01/2009 to 08/31/2012. Subsequently a No-Cost Extension was approved for a revised end date of 11/30/2013. The primary goals of the project were to develop continuum solvation models for nondielectric short-range interactions between solvent and solute that arise from dispersion, exchange, and hydrogen bonding. These goals were accomplished and are reported in the five peer-reviewed journal publications listed in the bibliography below. The secondary goals of the project included derivation of analytic gradients for the models, improvement of the cavity integration scheme, application of the models to the core-level spectroscopy of water, and several other miscellaneous items. These goals were not accomplished because they depended on completion of the primary goals, after which there was a lack of time for any additional effort.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A Home Ignition Assessment Model Applied to Structures in the Wildland-Urban Interface

The issue of exterior fire threat to buildings, from either wildfires in the wildland-urban interface or neighboring structure fires, is critically important. To address this, theWildfire Ignition Resistant Home Design (WIRHD) program was initiated. The WIRHD program developed a tool, theWildFIREWizard, that will allow homeowners to estimate the external fire threat to their homes based on specific features and characteristics of the homes and yards. The software then makes recommendations to reduce the threat. The inputs include the structural and material features of the home and information about any ignition sources or flammable objects in its immediate vicinity, known as the home ignition zone. The tool comprises an ignition assessment model that performs explicit calculations of the radiant and convective heating of the building envelope from the potential ignition sources. This article describes a series of material ignition and flammability tests that were performed to calibrate and/or validate the ignition assessment model. The tests involved exposing test walls with different external siding types to radiant heating and/or direct flame contact.The responses of the test walls were used to determine the conditions leading to melting, ignition, or any other mode of failure of the walls. Temperature data were used to verify the model predictions of temperature rises and ignition times of the test walls.

Biswas, Kaushik↗

Stochastic process models for linear structure behavior.

Linear systems are good approximations of the input-output relationship for many real systems. In practice, ensembles of nominally identical systems can seldom be adequately represented by a single linear system. Some accommodation needs to be made for representing inherent ensemble randomness. One approach would be to use a parameterized model of the system, with the random nature captured in discrete parameters of the parameterized model. Another approach is to use data measured from each system in the ensemble to represent the random nature of the ensemble in a non-parametric form. This is the approach described in this paper. There are several different types of data that could be collected from each system in the ensemble, each type capable of capturing the input-output behavior of the linear system: input-output time domain data, perhaps with specific excitation sequences; Markov parameters; and Frequency Response Functions (FRFs) to name a few. We choose to work with FRF data because many system attributes can be easily interpreted by inspection of the FRF. FRF data can also be used directly for control design. This paper develops a Karhunen-Loeve expansion representation for linear system behavior based on FRF data to develop a compact representation of the uncertainty inherent in an ensemble of systems. This non-parametric, compact, representation of the distribution of linear systems can then be used to characterize the performance and stability of a given feedback control law, as well as for control law design.

42 ENGINEERING↗

An analysis of the structure of an n-dodecane spray flame using TPDF modelling

With a view to understanding ignition and combustion behaviours in diesel engines, this study investigates several aspects of ignition and combustion of an n-dodecane spray in a high pressure, high temperature chamber, known as Spray A, using data resulting from modelling using the transported probability density function (TPDF) method. The model has been validated comprehensively with good to excellent agreement in our previous work against all available experimental data including for mixture-fraction and velocity fields in non-reacting cases, and flame lift-off length and ignition delay in reacting cases. This good agreement encourages further investigation of the numerical model results to help understand the structure of this flame, which serves to complement the experimental information that is available, which is very limited due to the difficult experimental conditions in which this flame exists. For example, quantitative experimental measurements of local mixture-fraction, temperature, velocity gradients, etc. are not yet possible in reacting cases. Analysis of the model results shows that two-stage ignition is found to occur across the ambient temperature conditions considered: the first stage is rapidly initiated on the lean side where temperatures are high and sequentially moves to richer, cooler conditions. The first stage is extremely resilient to turbulence, occurring in a region of very low Damkohler number. The second stage of ignition occurs first in rich mixtures in a region behind the head of the fuel jet where mixture gradients are low, and appears to be influenced strongly by turbulence. Relative to a homogeneous reactor, it is delayed on the lean side but advanced on the rich side, suggesting entrainment and mixing from the early igniting lean regions into richer mixtures is an important moderator of the ignition process. The second-stage ignition front propagates at very high velocities initially, suggesting it is a sequential ignition moving according to gradients of ignition delay and/or residence time. The flame stabilises however on the lean side in a region of much lower velocity, where turbulent velocity fluctuations are sufficiently high such that turbulent transport influences the propagation. It stabilises in a region of low Damkohler number which implies that a competition of chemistry versus micro-mixing might also be involved in stabilisation. The stabilisation mechanism is investigated by an analysis of the transport budgets, showing the flame is stabilised by autoignition but moderated by turbulent diffusion. Further analysis of the flame index supports this stabilisation mechanism, and demonstrates the simultaneous existence of non-premixed and premixed combustion modes in the same flame. Analysis of the flow fields also reveals that local entrainment and dilatation are important flow features near the flame base. (C) 2015 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Diesel↗

Artificially Structured Semiconductors to Model Novel Quantum Phenomena

Award Period: September 1st, 2013 through February 15th, 2017 Submitted to the USDOE Office of Basic Energy Sciences By Aron Pinczuk and Shalom J. Wind Department of Applied Physics and Applied Mathematics Columbia University New York, NY 10027 January 2017 Award # DE-SC0010695 ABSTRACT Research in this project seeks to design, create and study a class of tunable artificial quantum structures in order to extend the range and scope of new and exciting physical phenomena and to explore the potential for new applications. Advanced nanofabrication was used to create an external potential landscape that acts as a lattice of confinement sites for electrons (and/or holes) in a two-dimensional electron gas in a high perfection semiconductor in such a manner that quantum interactions between different sites dictate the significant physics. Our current focus is on ‘artificial graphene’ (AG) in which a set of quantum dots (or sites) are patterned in a honeycomb lattice. The combination of leading edge nanofabrication with ultra-pure semiconductor materials in this project extends the frontier for small period, low-disorder AG systems, enabling the exploration of graphene physics in a semiconductor platform. TECHNICAL DESCRIPTION Contemporary condensed matter science has entered an era of discovery of new low-dimensional materials, such as graphene and other atomically thin materials, that exhibit exciting new physical phenomena that were previously inaccessible. Concurrent with the discovery and development of these new materials are impressive advancements in nanofabrication, which offer an ever-expanding toolbox for creating a myriad of high quality patterns at nanoscale dimensions. This project started about four years ago. Among its major achievements are the realizations of very small period artificial lattices with honeycomb topology in GaAs quantum wells. In our most recent work the periods of the ‘artificial graphene’ (AG) lattices extend down to 40 nm. These small periods are about three times smaller than previously reported in GaAs quantum wells. This milestone establishes a new state-of-the-art in fields of research and nanofabrication. In experiments using optical scattering methods we uncovered evidence that free electrons in the small period AG lattices display novel features that arise from the symmetry of the honeycomb lattice. These achievements create semiconductor platforms for explorations of novel states and effects that offer opportunities to create quasiparticles with tunable character. The quest for the discovery of novel quantum physics by nanofabrication of ‘artificial structures’ in semiconductor quantum structures overlaps with the development of quantum simulators. Nanopatterns were created at Columbia University by the group of co-PI Shalom Wind using a 100keV e-beam nanolithography instrument (along with associated processing) that is part of the Columbia Nano Initiative. Optical experiments were carried out in the group of PI Aron Pinczuk. GaAs/AlGaAs quantum wells(QWs) of world-class perfection that serve as electron hosts are the starting material grown by molecular beam epitaxy (MBE) by our partners Dr. Loren Pfeiffer (Princeton Univ.) and Prof. Michael Manfra (Purdue Univ.). The inductively coupled plasma reactive ion etching (ICP-RIE) was carried out at the PRISM Micro/Nano Fabrication Laboratory of Princeton University. Dr. Vittorio Pellegrini (Istituto Italiano di Tecnologia, Genoa, Italy) has contributed critical insight on this research. Two graduate students in this project Sheng Wang and Diego Scarabelli, graduated in the summer/fall of 2016. Dr. Yuliya Kuznetsova has been a postdoc in the group. The current work is led by Dr. Lingjie Du, a postdoctoral scientist that joined the group of the PI on October 15th, 2016. Since the start of this project we have focused primarily on developing protocols towards the fabrication of the artificial lattices and in the implementation of characterization methods to identify the new electron states that are created. A major milestone has been the realization of the Dirac cones that emerge in honeycomb lattices. In the next phases of this project, and as we achieve milestones, we wish to expand our experimental platform so that we will be better positioned to access emergent novel quantum behavior and phases of electrons in artificial lattices designed and fabricated with ‘exquisite’ precision. The AG lattices with greatly reduced disorder from nano-processing that we have already created demonstrate that we are poised for the next stage exploration of graphene physics and applications in semiconductor quantum structures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic structure theory on modeling short-range noncovalent interactions between amino acids

While short-range noncovalent interactions (NCIs) are proving to be of importance in many chemical and biological systems, these atypical bindings happen within the so-called van der Waals envelope and pose an enormous challenge for current computational methods. We introduce SNCIAA, a database of 723 benchmark interaction energies of short-range noncovalent interactions between neutral/charged amino acids originated from protein x-ray crystal structures at the “gold standard” coupled-cluster with singles, doubles, and perturbative triples/complete basis set [CCSD(T)/CBS] level of theory with a mean absolute binding uncertainty less than 0.1 kcal/mol. Subsequently, a systematic assessment of commonly used computational methods, such as the second-order Møller−Plesset theory (MP2), density functional theory (DFT), symmetry-adapted perturbation theory (SAPT), composite electronic-structure methods, semiempirical approaches, and the physical-based potentials with machine learning (IPML) on SNCIAA is carried out. It is shown that the inclusion of dispersion corrections is essential even though these dimers are dominated by electrostatics, such as hydrogen bondings and salt bridges. Overall, MP2, ωB97M-V, and B3LYP+D4 turned out to be the most reliable methods for the description of short-range NCIs even in strongly attractive/repulsive complexes. SAPT is also recommended in describing short-range NCIs only if the δMP2 correction has been included. The good performance of IPML for dimers at close-equilibrium and long-range conditions is not transferable to the short-range. We expect that SNCIAA will assist the development/improvement/validation of computational methods, such as DFT, force-fields, and ML models, in describing NCIs across entire potential energy surfaces (short-, intermediate-, and long-range NCIs) on the same footing.

Chemistry↗

Reducing computation in an i-vector speaker recognition system using a tree-structured universal background model

The majority of state-of-the-art speaker recognition systems (SR) utilize speaker models that are derived from an adapted universal background model (UBM) in the form of a Gaussian mixture model (GMM). This is true for GMM supervector systems, joint factor analysis systems, and most recently i-vector systems. In all of the identified systems, the posterior probabilities and sufficient statistics calculations represent a computational bottleneck in both enrollment and testing. We propose a multi-layered hash system, employing a tree-structured GMM–UBM which uses Runnalls’ Gaussian mixture reduction technique, in order to reduce the number of these calculations. Moreover, with this tree-structured hash, we can trade-off reduction in computation with a corresponding degradation of equal error rate (EER). As an example, we also reduce this computation by a factor of 15× while incurring less than 10% relative degradation of EER (or 0.3% absolute EER) when evaluated with NIST 2010 speaker recognition evaluation (SRE) telephone data.

42 ENGINEERING↗

Configurational-Bias Monte Carlo Back-Mapping Algorithm for Efficient and Rapid Conversion of Coarse-Grained Water Structures into Atomistic Models

Coarse-grained molecular dynamics (MD) simulations represent a powerful approach to simulate longer time scale and larger length scale phenomena than those accessible to all-atom models. The gain in efficiency, however, comes at the cost of atomistic details. The reverse transformation, also known as back-mapping, of coarse grained beads into their atomistic constituents represents a major challenge. Most existing approaches are limited to specific molecules or specific force-fields and often rely on running a long time atomistic MD of the back-mapped configuration to arrive at an optimal solution. Such approaches are problematic when dealing with systems with high diffusion barriers. Here, we introduce a new extension of the configurational-bias-Monte-Carlo (CBMC) algorithm, which we term the crystalline-configurational-bias-Monte-Carlo (C-CBMC) algortihm, that allows rapid and efficient conversion of a coarse-grained model back into its atomistic representation. Although the method is generic, we use a coarse-grained water model as a representative example and demonstrate the back-mapping or reverse transformation for model systems ranging from the ice-liquid water interface to amorphous and crystalline ice configurations. A series of simulations using the TIP4P/Ice model are performed to compare the new CBMC method to several other standard Monte Carlo and Molecular Dynamics based back-mapping techniques. In all the cases, the C-CBMC algorithm is able to find optimal hydrogen bonded configuration many thousand evaluations/steps sooner than the other methods compared within this paper. For crystalline ice structures such as a hexagonal, cubic, and cubic-hexagonal stacking disorder structures, the C-CBMC was able to find structures that were between 0.05 and 0.1 eV/water molecule lower in energy than the ground state energies predicted by the other methods. Detailed analysis of the atomistic structures show a significantly better global hydrogen positioning when contrasted with the existing simpler back-mapping methods. The error in the RDFs of backmapped relative to reference configuration for the CCBMC, MD, and MC were found to be 6.9, 8.7, and 12.9 respectively for the hexagonal system. For the cubic system the relative error of the RDFs for the CCBMC, MD, and MC were found to be 18.2, 34.6, and 39.0 respectively. Finally, our results demonstrate the efficiency and efficacy of our new back-mapping approach, especially for crystalline systems where simple force-field based relaxations have a tendency to get trapped in local minima.

74 ATOMIC AND MOLECULAR PHYSICS↗

Evidence of local defects in the oxygen excess apatite La{sub 9.67}(SiO{sub 4}){sub 6}O{sub 2.5} from high resolution neutron powder diffraction

From neutron diffraction data collected at 3 K on a powder of La{sub 9.67}(SiO{sub 4}){sub 6}O{sub 2.5} composition and a careful examination of the average structure, a model was proposed to explain the oxygen over-stoichiometry in the apatite structure. This model leads to realistic distances to neighbouring atoms. Moreover, it accounts perfectly for the maximum oxygen content observed in these materials. Up to 0.5 oxygen atom located at the vicinity of the 2a site (0, 0, 1/4) would be shifted to a new interstitial position in the channel at (-0.01, 0.04, 0.06), creating a Frenkel defect, with the possibility of a maximum occupancy in this site equal to twice the Frenkel defect numbers. This structural model is in good agreement with the oxygen diffusion pathways recently proposed by Bechade et al. (2009) using computer modeling techniques. It supports preferred oxygen diffusion pathways via interstitial oxygen atoms and vacant sites along [0 0 1], close to the centre of the La(2)-O channels. - Graphical abstract legend: Structural defect position and possible conduction mechanism along the c-axis (representation of two adjacent unit-cells)

36 MATERIALS SCIENCE↗

A thin-walled composite beam model for light-weighted structures interacting with fluids

A thin-walled beam model is proposed for structures of variable cross-section, which can be either open or closed and includes multicellular cross-sections with either isotropic or orthotropic materials. The proposed model does not require any priori definition of cross-sectional warping which instead results from the solution of the problem. To achieve that a special deformation pattern is superimposed on the bending deformation described by Euler–Bernoulli beam theory. All sectional properties are automatically incorporated in the analysis as a result of the usual variational formulation of the system of equations. The proposed model is specifically designed to simulate the dynamics of wind/hydrokinetic turbine blade with low computational cost, especially in fluid–structure interaction (FSI) simulation. A number of test cases have been carried out to validate the proposed structural model which show good agreement between the results obtained her e and the solutions available in literature. Finally, FSI simulation of a hydrokinetic blade under field condition is carried out to illustrate the capability of the current thin-walled beam model in practice.

42 ENGINEERING↗

Topological Structures in a Model Cuprate

We address a minimal model to describe the charge degree of freedom in the CuO{sub 2} planes with the on-site Hilbert space reduced to only a charge triplet of the three effective valence centers, nominally Cu{sup 1+;2+;3+}, and made use of the S = 1 pseudospin formalism. The 2D S = 1 pseudospin system is prone to a creation of different topological structures which form topologically protected inhomogeneous distributions of the eight local S = 1 pseudospin order parameters including charge density and superfluid order parameters. We focus on the so-called quadrupole skyrmion which is believed to be a candidate for a topological charge excitation in parent or underdoped cuprates. Puzzlingly, such an unconventional structure is characterized by a uniform distribution of the mean on-site charge that makes the quadrupole skyrmion texture to be invisible for X-rays. We suppose that the parent insulating antiferromagnetic cuprates may be unstable with regard to nucleation of topological defects in the unconventional form of the one- or multi-center skyrmion-like object with ring-shaped superfluid regions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗