Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Machine Learning Inference of Random Medium Properties

Earth materials are heterogeneous across a range of spatial scales, but the resolvability of small structures is limited by sparse data coverage, noise, bandlimitedness, and other difficulties. In practice, heterogeneities below a certain size cannot be recovered from seismic data except through statistical medium descriptions, which even then can be difficult to uniquely determine. To improve the characterization of such heterogeneities, we develop a novel supervised machine learning (ML) model that provides insight about the recoverability of statistical medium properties from elastic waveform data and succeeds despite cycle-skipping and other challenges well known from elastic waveform inversion. We demonstrate the approach using random media generated by superimposing self-affine random variations on homogeneous and layered background structures. After training on sparsely-recorded, high-frequency waveforms from hundreds of different random medium realizations, we show the ability of our ML model to recover correlation lengths and other statistical properties of interest to near-surface and crustal seismology, among other fields. For frequency passbands and spatial offsets encountered in seismology, Gaussian correlation lengths and the amplitude of the random variations relative to the background model are recovered even in challenging scenarios involving unknown medium parameters, complex crustal structures, and low signal-to-noise ratio. In comparison, von Kármán correlation lengths, which are related to larger-wavelength variations of the medium than Gaussian correlation lengths, are not as well recovered. These results provide one of the first and most systematic investigations of the recoverability of statistical properties of heterogeneities below the resolution limit of deterministic seismic tomography, and suggest practical ML strategies for high-frequency waveform seismology.

58 GEOSCIENCES↗

Azimuthal Size Scales of Solar Wind Periodic Density Structures

Periodic Density Structures (PDSs) are quasi-periodic variations of solar wind density ranging from a few minutes to a few hours. PDSs advect with the solar wind and have radial length scales (Lx) of tens to several thousand Mm, thus belonging to the class of “mesoscale structures”. Current interplanetary multi-spacecraft observations are not at spatial separations capable of directly measuring the 3D size scale of PDSs or other mesoscale structures. Instead, previous investigations estimated characteristic spatial scales in solar wind parameters using cross-correlation and/or coherence analysis applied to multi-spacecraft observations. For solar wind density and interplanetary magnetic field (IMF) intensity, the reported size scales perpendicular to the Sun-Earth line (Ly) ranged between ≈30 and ≈200 Earth Radii (RE). Here, we implemented a similar approach on the same parameters but focused on high density slow solar wind intervals with PDSs observed by the Wind and ARTEMIS-P1 spacecraft. Additionally, this is the first statistical study of the IMF intensity periodicities in relation to PDSs. We identified intervals in which the two spacecraft observed the same periodicity obtaining two PDS groups based on their radial length scale: Lx1 ≈86RE and Lx2 ≈35RE. Then, we classified the events based on the periodic variations’ coherence level. Reproducing the results with simulations of the PDSs’ transit, we inferred the Ly order of magnitudes for the two PDS groups: Ly1 ≈340RE and Ly2 ≈187RE. Knowing the PDSs’ size scales is fundamental to constrain models aimed at reproducing these structures and is critical to better understand the PDS-magnetosphere coupling.

Interplanetary physics↗

Variations in the Contouring of Organs at Risk: Test Case From a Patient With Oropharyngeal Cancer

Purpose: Anatomy contouring is critical in radiation therapy. Inaccuracy and variation in defining critical volumes will affect everything downstream: treatment planning, dose-volume histogram analysis, and contour-based visual guidance used in image-guided radiation therapy. This study quantified: (1) variation in the contouring of organs at risk (OAR) in a clinical test case and (2) corresponding effects on dosimetric metrics of highly conformal plans. Methods and Materials: A common CT data set with predefined targets from a patient with oropharyngeal cancer was provided to a population of clinics, which were asked to (1) contour OARs and (2) design an intensity-modulated radiation therapy plan. Thirty-two acceptable plans were submitted as DICOM RT data sets, each generated by a different clinical team. Using those data sets, we quantified: (1) the OAR contouring variation and (2) the impact this variation has on dosimetric metrics. New technologies were employed, including a software tool to quantify three-dimensional structure comparisons. Results: There was significant interclinician variation in OAR contouring. The degree of variation is organ-dependent. We found substantial dose differences resulting strictly from contouring variation (differences ranging from -289% to 56% for mean OAR dose; -22% to 35% for maximum dose). However, there appears to be a threshold in the OAR comparison metric beyond which the dose differences stabilize. Conclusions: The effects of interclinician variation in contouring organs-at-risk in the head and neck can be large and are organ-specific. Physicians need to be aware of the effect that variation in OAR contouring can play on the final treatment plan and not restrict their focus only to the target volumes.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Structural design aspects of reusable surface insulation thermal protection systems.

Low density fiber ceramic materials coated with refractory ceramics meet the requirements of reusable low weight thermal protection systems. The structural characteristics of this class of material impose unique design and analysis requirements on the application to spacecraft structural elements. Finite element type stress analysis techniques are required to adequately predict the structural response of the system. Parametric analyses have been performed to determine the response of the system to variations in geometry, and to thermal and structural load conditions. Sensitivity of coating, insulation and attachment stresses are presented and critical failure modes are identified.

Michalak, R. J.↗

Plasmasphere refilling - Recent observations and modeling

The phenomenon of plasmasphere refilling and general considerations of plasmasphere structure and plasmasphere-ionosphere coupling have received increased attention in recent years in terms of both observational considerations and modeling investigations. 'Global' observational and modeling studies of the plasmasphere structure are in the process of demonstrating the complex manner in which refilling and the spatial and temporal variations of convection interplay to produce complex structure in the plasmasphere; these studies are particularly timely as they could be extremely helpful for interpreting results from proposed imaging of plasmaspheric He(+). This review highlights the observational and theoretical/modeling progress during the past few years as well as introduces and places in context the particular contributions contained in this special section.

Singh, M.↗

Model reduction for flexible structures

Several conditions for a near-optimal reduction of general dynamic systems are presented focusing on the reduction in balanced and modal coordinates. It is shown that model and balanced reductions give very different results for the flexible structure with closely-spaced natural frequencies. In general, balanced reduction is found to give better results. A robust model reduction technique was developed to study the sensitivity of modeling error to variations in the damping of a structure. New concepts of grammians defined over a finite time and/or a frequency interval are proposed including computational procedures for evaluating them. Application of the model reduction technique to these grammians is considered to lead to a near-optimal reduced model which closely reproduces the full system output in the time and/or frequency interval.

Gawronski, Wodek↗

Impact of Dihedral Angle in Conjugated Organic Cation on the Structures and Properties of Organic‐Inorganic Lead Iodides

Abstract Conjugated organic cations are intriguing for organic‐inorganic halide perovskites due to their direct participation in the optoelectronic properties of hybrid materials. In conjugated cations, the dihedral angle, or torsion angle, between adjacent aromatic rings is a critical secondary structural element. This angle influences not only the shape of the cations but also the overlap between the π‐orbitals on adjacent rings, thereby affecting their electronic properties. Understanding how variations in the dihedral angle impact the structure and properties of hybrid organic‐inorganic metal halides (HOIMHs) is fundamentally important. In this study, we utilized 2,2′‐dimethyl bipyridinium as the organic cation, reacting it with PbI₂ to form hybrid lead iodides. Remarkably, variations in the dihedral angle between the two pyridinium rings resulted in the formation of two distinct crystal structures with different band gaps. Our findings demonstrate that manipulating the dihedral angle offers a novel approach to controlling the structures and properties of hybrid metal halides with conjugated cations.

Chandra Patra, Bidhan [Department of Chemistry and↗

Spatial structure of sunspot oscillations observed with SDO/AIA

The spatial structure of sunspot oscillations and its variation with frequency and height have been studied using data from SDO/AIA for two well-developed sunspots observed in 2010. Computation of potential magnetic fields together with line-of-sight and vector magnetograms from SDO/HMI allowed us to interpret discovered features of spatial structure. Namely, we have found that (1) expansion of the magnetic field lines above the sunspot causes a gradual broadening of the area occupied by the 3 minute oscillations with height, and (2) variation of magnetic field inclination across the sunspot causes a decrease in the pulsation frequency with distance from the center of the umbra. We have shown that the transformation from 3 minute umbral oscillations to 5 minute penumbral waves can be explained by variation of the acoustic cutoff frequency across the sunspot.

79 ASTRONOMY AND ASTROPHYSICS↗

Coherent wave-zonal mean flow interactions in the troposphere

A comprehensive analysis of wave-zonal mean flow variations in the troposphere is carried out using results of observations on the spatial structure and temporal evolution of synoptic time scale variations of the tropospheric zonal mean flow. Seven years of daily operational analysis are examined along with data from the NCAR GCM. Coherent wave-zonal mean flow interactions were revealed via cross-correlation analyses, including fluctuations in zonal mean temperature, three-dimensional winds, and quadratic wave quantities. It was found that tropical zonal wind tendency fluctuations are coherent with those anticipated from quasi-geostrophic wave driving, while tropical temperature tendencies are incoherent with analyzed zonal mean vertical velocities.

Randel, William J.↗

Tunneling calculations for GaAs-Al(x)Ga(1-x) as graded band-gap sawtooth superlattices

Quantum mechanical tunneling calculations for sawtooth (linearly graded band-gap) and step-barrier AlGaAs superlattices were performed by means of a transfer matrix method, within the effective mass approximation. The transmission coefficient and tunneling current versus applied voltage were computed for several representative structures. Particular consideration was given to effective mass variations. The tunneling properties of step and sawtooth superlattices show some qualitative similarities. Both structures exhibit resonant tunneling, however, because they deform differently under applied fields, the J-V curves differ.

Forrest, Kathrine A.↗

The Role of Premagmatic Rifting in Shaping a Volcanic Continental Margin: An Example From the Eastern North American Margin

Both magmatic and tectonic processes contribute to the formation of volcanic continental margins. Such margins are thought to undergo extension across a narrow zone of lithospheric thinning (~100 km). New observations based on existing and reprocessed data from the Eastern North American Margin contradict this hypothesis. With ~64,000 km of 2-D seismic data tied to 40 wells combined with published refraction, deep reflection, receiver function, and onshore drilling efforts, we quantified along-strike variations in the distribution of rift structures, magmatism, crustal thickness, and early post-rift sedimentation under the shelf of Baltimore Canyon Trough (BCT), Long Island Platform, and Georges Bank Basin (GBB). Results indicate that BCT is narrow (80–120 km) with a sharp basement hinge and few rift basins. The seaward dipping reflectors (SDR) there extend ~50 km seaward of the hinge line. In contrast, the GBB is wide (~200 km), has many syn-rift structures, and the SDR there extend ~200 km seaward of the hinge line. Early post-rift depocenters at the GBB coincide with thinner crust suggesting “uniform” thinning of the entire lithosphere. Models for the formation of volcanic margins do not explain the wide structure of the GBB. We argue that crustal thinning of the BCT was closely associated with late syn-rift magmatism, whereas the broad thinning of the GBB segment predated magmatism. Correlation of these variations to crustal terranes of different compositions suggests that the inherited rheology determined the premagmatic response of the lithosphere to extension.

58 GEOSCIENCES↗

Genetic control of photoprotection and photosystem II operating efficiency in plants

Summary Photoprotection against excess light via nonphotochemical quenching (NPQ) is indispensable for plant survival. However, slow NPQ relaxation under low light conditions can decrease yield of field‐grown crops up to 40%. Using semi‐high‐throughput assay, we quantified the kinetics of NPQ and photosystem II operating efficiency (ΦPSII) in a replicated field trial of more than 700 maize ( Zea mays ) genotypes across 2 yr. Parametrized kinetics data were used to conduct genome‐wide association studies. For six candidate genes involved in NPQ and ΦPSII kinetics in maize the loss of function alleles of orthologous genes in Arabidopsis ( Arabidopsis thaliana ) were characterized: two thioredoxin genes, and genes encoding a transporter in the chloroplast envelope, an initiator of chloroplast movement, a putative regulator of cell elongation and stomatal patterning, and a protein involved in plant energy homeostasis. Since maize and Arabidopsis are distantly related, we propose that genes involved in photoprotection and PSII function are conserved across vascular plants. The genes and naturally occurring functional alleles identified here considerably expand the toolbox to achieving a sustainable increase in crop productivity.

59 BASIC BIOLOGICAL SCIENCES↗

Chemical depth profiles of the GaAs/native oxide interface

The final-state oxidation products and their distribution in thin native oxides (30-40 A) on GaAs have been studied using X-ray photoelectron spectroscopy in conjunction with chemical depth profiling. Extended room-temperature-oxidation conditions have been chosen to allow the native oxide to attain its equilibrium composition and structure. The work emphasizes the use of chemical depth-profiling methods which make it possible to examine the variation in chemical reactivity of the oxide structure. A minimum of two distinct regions of Ga2O3 with differing chemical reactivity is observed. Chemical shift data indicate the presence of As2O3 in the oxide together with an elemental As overlayer at the interface. A change in relative charge transfer between oxygen and both arsenic and gallium-oxide species is observed in the region of the interface.

Grunthaner, P. J.↗

Observations of large-scale structure in the inner heliosphere with Doppler scintillation measurements

A study of large-scale structure in the inner heliosphere based on unique and extensive Pioneer Venus Doppler scintillation data has been initiated. Preliminary results include the first observation of corotating stream structure inside 35 solar radii. Results on variations of the Doppler scintillations with solar cycle and heliocentric distance, and their implications in terms of solar wind structure and mass flux density, are discussed.

Woo, R.↗

Predicting the mechanical response of oligocrystals with deep learning

In this study, we employ data-driven homogenization approaches to predict the particular mechanical evolution of polycrystalline aggregates with tens of individual crystals. In these oligocrystals the differences in stress response due to microstructural variation is pronounced. Shell-like structures produced by metal-based additive manufacturing and the like make the prediction of the behavior of oligocrystals technologically relevant. The predictions of traditional homogenization theories based on grain volumes are not sensitive to variations in local grain neighborhoods. Direct simulation of the local response with crystal plasticity finite element methods is more detailed, but the computations are expensive. To represent the stress-strain response of a polycrystalline sample given its initial grain texture and morphology we have designed a novel neural network that incorporates a convolution component to observe and reduce the information in the crystal texture field and a recursive component to represent the causal nature of the history information. This model exhibits accuracy on par with crystal plasticity simulations at minimal computational cost per prediction.

36 MATERIALS SCIENCE↗

Revisiting the structures of several antibiotics bound to the bacterial ribosome

The increasing prevalence of antibiotic-resistant pathogens reinforces the need for structures of antibiotic-ribosome complexes that are accurate enough to enable the rational design of novel ribosome-targeting therapeutics. Structures of many antibiotics in complex with both archaeal and eubacterial ribosomes have been determined, yet discrepancies between several of these models have raised the question of whether these differences arise from species-specific variations or from experimental problems. Our structure of chloramphenicol in complex with the 70S ribosome from Thermus thermophilus suggests a model for chloramphenicol bound to the large subunit of the bacterial ribosome that is radically different from the prevailing model. Further, our structures of the macrolide antibiotics erythromycin and azithromycin in complex with a bacterial ribosome are indistinguishable from those determined of complexes with the 50S subunit of Haloarcula marismortui, but differ significantly from the models that have been published for 50S subunit complexes of the eubacterium Deinococcus radiodurans. Our structure of the antibiotic telithromycin bound to the T. thermophilus ribosome reveals a lactone ring with a conformation similar to that observed in the H. marismortui and D. radiodurans complexes. However, the alkyl-aryl moiety is oriented differently in all three organisms, and the contacts observed with the T. thermophilus ribosome are consistent with biochemical studies performed on the Escherichia coli ribosome. Thus, our results support a mode of macrolide binding that is largely conserved across species, suggesting that the quality and interpretation of electron density, rather than species specificity, may be responsible for many of the discrepancies between the models.

60 APPLIED LIFE SCIENCES↗

Revisiting the Structures of Several Antibiotics Bound to the Bacterial Ribosome

The increasing prevalence of antibiotic-resistant pathogens reinforces the need for structures of antibiotic-ribosome complexes that are accurate enough to enable the rational design of novel ribosome-targeting therapeutics. Structures of many antibiotics in complex with both archaeal and eubacterial ribosomes have been determined, yet discrepancies between several of these models have raised the question of whether these differences arise from species-specific variations or from experimental problems. Our structure of chloramphenicol in complex with the 70S ribosome from Thermus thermophilus suggests a model for chloramphenicol bound to the large subunit of the bacterial ribosome that is radically different from the prevailing model. Further, our structures of the macrolide antibiotics erythromycin and azithromycin in complex with a bacterial ribosome are indistinguishable from those determined of complexes with the 50S subunit of Haloarcula marismortui, but differ significantly from the models that have been published for 50S subunit complexes of the eubacterium Deinococcus radiodurans. Our structure of the antibiotic telithromycin bound to the T. thermophilus ribosome reveals a lactone ring with a conformation similar to that observed in the H. marismortui and D. radiodurans complexes. However, the alkyl-aryl moiety is oriented differently in all three organisms, and the contacts observed with the T. thermophilus ribosome are consistent with biochemical studies performed on the Escherichia coli ribosome. Thus, our results support a mode of macrolide binding that is largely conserved across species, suggesting that the quality and interpretation of electron density, rather than species specificity, may be responsible for many of the discrepancies between the models.

60 APPLIED LIFE SCIENCES↗

Imitating Architectural Mortise‐Tenon Structure for Stable Ni‐Rich Layered Cathodes

Ni-rich layered oxides are the most promising cathodes for Li-ion batteries, but chemo-mechanical failures during cycling and large first-cycle capacity loss hinder their applications in high-energy batteries. Herein, by introducing spinel-like mortise-tenon structures into the layered phase of LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811), the adverse volume variations in cathode materials can be significantly suppressed. Meanwhile, these mortise-tenon structures play the role of the expressway for fast lithium-ion transport, which is substantiated by experiments and calculations. Moreover, the particles with mortise-tenon structures usually terminate with the most stable (003) facet. The new cathode exhibits a discharge capacity of 215 mAh g –1 at 0.1 C with an initial Coulombic efficiency of 97.5%, and capacity retention of 82.2% after 1200 cycles at 1 C. Importantly, this work offers a viable lattice engineering to address the stability and low initial Coulombic efficiency of the Ni-rich layered oxides, and facilitates the implementation of Li-ion batteries with high-energy density and long durability.

25 ENERGY STORAGE↗