Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Increased Alignment in Carbon Nanotube Growth

Method and system for fabricating an array of two or more carbon nanotube (CNT) structures on a coated substrate surface, the structures having substantially the same orientation with respect to a substrate surface. A single electrode, having an associated voltage source with a selected voltage, is connected to a substrate surface after the substrate is coated and before growth of the CNT structures, for a selected voltage application time interval. The CNT structures are then grown on a coated substrate surface with the desired orientation. Optionally, the electrode can be disconnected before the CNT structures are grown.

Delzeit, Lance D.↗

Distinct Turbulence Structures in Stably Stratified Boundary Layers With Weak and Strong Surface Shear

Turbulence structures and exchange of momentum and heat in the nocturnal stable boundary layer (SBL) show distinct features under different stability conditions prompting interest in their connection. Here eddy covariance data collected at four different heights on a 62-m meteorological tower over a large open flat terrain are used to characterize different SBL states and associated turbulence structures. In a SBL characterized by strong near-surface winds, turbulent eddy sizes scale with their observational heights and the SBL experiences enhanced turbulent mixing of momentum and heat throughout (a state hereafter referred to as a “coupled” state). Conversely, in a decoupled SBL, weak winds occur near the surface and turbulent eddies are depressed and detached from the boundary leading to suppressed vertical mixing and layered SBL profiles. Because the transport of momentum and heat to the surface across SBL layers is determined by turbulent eddies, cross-layer correlation and the aforementioned SBL coupling states can be delineated by distinct turbulence structures.

54 ENVIRONMENTAL SCIENCES↗

(abstract) The SIR-C/X-SAR Mission

The Shuttle Imaging Radar-C and X-Band Synthetic Aperture Radar (SIR-C/X-SAR) is a cooperative experiment between the National Aeronautics and Space Administration (NASA), the German Space Agency (DARA), and the Italian Space Agency (ASI). The experiment is the next evolutionary step in NASA's Spaceborne Imaging Radar (SIR) program that began with the Seasat SAR in 1978, and continued with SAR -A in 1981 and SAR-B in 1984. The program will eventually lead to the Earth Observing System (EOS) SAR later in this decade. SIR-C will provide increased capability over Seasat, SIR-A, and SIR-B by acquiring polarimetric images simultaneously at two microwave frequencies: L-band (wavelength 24 cm) and C-band (wavelength 6 cm). X-SAR will operate at X-band (wavelength 3 cm) with VV polarization, resulting in a three-frequency capability. Because radar backscatter is most strongly influenced by objects comparable in size to the radar wavelength, this multifrequency capability will provide information about the Earth's surface over a wide range of scales not discernable with single-frequency experiments. The polarimetric data will yield quantitative information about the surface geometric structure, vegetation dielectric properties, and surface discontinuities. The first SIR-C/X-SAR flight is planned for early in 1994, with two subsequent flights in different seasons to enable data aquisition under different environmental conditions. SIR-C/X-SAR will collect data for a period of 6 to 9 days during each flight. The instrument will be flown in a 57(deg) inclination orbit with a nomimal orbit altitude of 215 km. This altitude will result in a slightly drifting orbit. The latest status of the SIR-C/X-SAR mission and instrument design, science activities, and expected results will be presented.

SIR-C/XSAR radar backscatter surface geometric str↗

Defect Formation under Nitrogen-Ion Implantation and Subsequent Annealing in GaAs Structures with an Uncovered Surface and a Surface Covered with an AlN Film

The concentration profiles of defects produced in structures upon the implantation of nitrogen ions into GaAs epitaxial layers with an uncovered surface and that covered with an AlN film and subsequent annealing are studied. The ion energies and the implantation doses are chosen so that the nitrogen-atom concentration profiles coincided in structures of both types. Rutherford proton backscattering spectra are measured in the random and channeling modes, and the concentration profiles of point defects formed are calculated for the samples under study. It is found that the implantation of nitrogen ions introduces nearly the same number of point defects into structures of both types, and the formation of an AlN film by ion-plasma sputtering is accompanied by the formation of an additional number of defects. However, the annealing of structures of both types leads to nearly the same concentrations of residual defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A cool anomaly off northern California - An investigation using IR imagery and in situ data

The OPTOMA (Ocean Prediction Through Observation, Modeling and Analysis) program is developing an ocean descriptive-predictive system for four-dimensional data assimilation. It is presently concerned with the mesoscale variability in the California Current System (CCS). The present paper has the objective to assess the relationship of surface temperature structure to subsurface temperature structure and flow fields. Surface temperature anomalies are related to the mesoscale horizontal advective and subsurface mass fields. The cool anomaly off northern California in summer 1982 is discussed, taking into account the temperature structure along transects, T-S variations and inferred water masses, variation of horizontal temperature patterns with depth, and synoptic information from IR data.

Rienecker, M. M.↗

Optimal packing size of non-ligated CdSe nanoclusters for microstructure synthesis

Structural and electrostatic properties of nanoclusters of CdSe of diameter 1–2 nm are studied with first principle calculations to determine the optimal size for synthesizing microstructures. Based on robustness of the core structure, i.e., the retention of tetrahedral geometry, hexagonal ring structure, and overall wu{sup ¨}rtzite structure to surface relaxations, we conclude that nanoclusters of ~2 nm diameter are the best candidates to form a dense microstructure with minimal interstitial space. Se-terminated surfaces retain a zigzag structure as Se atoms are pulled out and Cd atoms are pulled in due to relaxation, therefore, are best suited for inter-nanocluster formations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Long-term deformational simulation of PC bridges based on the thermo-hygro model of micro-pores in cementitious composites

Creep deflections that greatly exceed the predicted values by the linear creep law are being found in measurements on actual PC bridge viaducts. In this study, structural creep deformations were reproduced by using the multi-scale coupled thermo-hygro and mechanical modeling which enables to deal with an interaction of chemo-physical events of differing dimensions ranging from the kinematics of moisture in micro-pores to the macroscopic structural mechanics, and the effect of various factors was analytically investigated. The numerical analysis approximately reproduced the excessive deflection measured on an actual bridge viaduct. It was confirmed that the creep bending of the viaduct having the hollow cross-section varies significantly due to the ambient temperature, humidity and the structural specific surface area. The macroscopic structural responses in association with the thermodynamic state of moisture in the micro-pores are also discussed.

36 MATERIALS SCIENCE↗

Performance demonstration of vacuum microwave components critical for the operation of the ITER low-field side reflectometer

Final design studies in preparation for manufacturing have been performed for functional components of the vacuum portion of the ITER Low-Field Side Reflectometer (LFSR). These components consist of an antenna array, electron cyclotron heating (ECH) protection mirrors, phase calibration mirrors, and vacuum windows. Evaluation of these components was conducted at the LFSR test facility and DIII-D. The antenna array consists of six corrugated-waveguide antennas for simultaneous profile, fluctuation, and Doppler measurements. A diffraction grating, incorporated into the plasma-facing miter bend, provides protection of sensitive components from stray ECH at 170 GHz. For in situ phase calibration of the LFSR profile reflectometer, an embossed mirror is incorporated into the adjacent miter bend. Measurements of the radiated beam profile indicate that these components have a small, acceptable effect on mode conversion and beam quality. Baseline transmission characteristics of the dual-disk vacuum window are obtained and are used to guide ongoing developments. Preliminary simulations indicate that a surface-relief structure on the window surfaces can greatly improve transmission. The workability of real-time phase measurements was demonstrated on the DIII-D profile reflectometer. The new automated real-time analysis agrees well with the standard post-processing routine.

47 OTHER INSTRUMENTATION↗

Radar Sounding of Mars: A Focus on MARSIS

Radar has the unique capability of looking under the dry and cold surfaces of Mars. The depth of penetration of radio waves depends on a number of surface and subsurface parameters such as surface topography, subsurface geological structure, and surface and subsurface electromagnetic properties. Among these parameters, the surface topography is known best largely due to valuable data provided by Mars Global Surveyor's MOLA (Mars Orbiter Laser Altimeter) instrument. However, little information is available on the electromagnetic properties and subsurface characteristics of Mars. In addition to dispersion, the ionosphere will also attenuate the radio wave. The level of attenuation depends on the ionosphere's electron density and its profile shape and the electron-neutral collision frequency. Fortunately, information from past missions can provide some information on the expected level of attenuation. A figure shows expected total radio wave attenuation under three different ionospheric conditions. Additional information is contained in the original extended abstract.

Safaeinili, A.↗

Radar Sounding of Mars: A Focus on MARSIS

Radar has the unique capability of looking under the dry and cold surfaces of Mars. The depth of penetration of radio waves depends on a number of surface and subsurface parameters such as surface topography, subsurface geological structure and surface and subsurface electromagnetic properties. Among these parameters, the surface topography is known best largely due to valuable data provided by Mars Global Surveyor's MOLA instrument. However, little information is available on the electromagnetic properties and subsurface characteristics of Mars.

radar sounding↗

Molecular structure and sour gas surface chemistry of supported K 2 O/WO 3 /Al 2 O 3 catalysts

Molecular structures of the unprompted and K 2 O-promoted supported WO 3 /Al 2 O 3 catalysts were studied with in situ Raman and UV-vis spectroscopy. In situ Raman spectra revealed that supported 20% WO 3 /Al 2 O 3 corresponds to near monolayer coverage of isolated and oligomeric surface WOx species on Al 2 O 3 . Above monolayer surface WO x coverage (21% WO 3 /Al 2 O 3 ), crystalline WO 3 nanoparticles are also present. The addition of K 2 O to the supported WO 3 /Al 2 O 3 catalyst increased the concentration of isolated surface WO x species and did not form K 2 WO 4 nanoparticles. The reducibility of the tungsten oxide structures depends on their structures (2D or 3D) and the K 2 O promoter. Their interaction with acidic CO 2 and SO 2 gases was also investigated. Adsorption of CO 2 creates several surface carbonate species of varying acidity that were detected using a combination of in situ IR and mass spectroscopy. Adsorbed bicarbonate form on weakly basic surface sites on tungsten oxide monolayer WO 3 /Al 2 O 3 catalyst as well as in the presence of low 2.5% K 2 O loading. At high 5% K 2 O loading, the presence of the strong surface basic sites yields adsorbed carbonates. In conclusion, after SO 2 pretreatment, however, new strongly adsorbed sulfate appears on the surface that inhibit CO 2 adsorption.

36 MATERIALS SCIENCE↗

Atomistic modeling of energy band alignment in CdSeTe surfaces

Atomistic modeling based on Desnity Functional Theory (DFT)- 1/2 method coupled with surface Green’s function has been employed to investigate the energy band alignment results in cadmium selenium telluride (CdSeTe) surfaces. The structural and electronic properties of the bulk ternary alloy were established before cleaving the CdSeTe low index surface facets. The dependency of atomic-scale electronic features on different plane orientations was explored by studying the energy band alignment diagrams in the unreconstructed and reconstructed surfaces. While the low index CdSeTe surface geometry reconstructions replicate the CdTe surface geometries, the energy band alignment features of the unreconstructed and reconstructed CdSeTe surfaces differ from those observed in CdTe low index surfaces. The structurally relaxed reconstructed CdSeTe surface results in purely flat bands as opposed to an internal cusp feature observed in CdTe surfaces. The presence of an internal energy cusp in CdTe(111) surfaces is expected to play a key role in enhancing the hole charge transport towards the back of CdTe-only solar cell device and the absence of such feature in CdSeTe surface may explain one of the reason for the lower performance of CdSeTe-only solar cell seen experimentally.

36 MATERIALS SCIENCE↗

Peptide-Directed PdAu Nanoscale Surface Segregation: Toward Controlled Bimetallic Architecture for Catalytic Materials

Bimetallic nanoparticles are of immense scientific and technological interest given the synergistic properties observed when mixing two different metallic species at the nanoscale. This is particularly prevalent in catalysis, where bimetallic nanoparticles often exhibit improved catalytic activity and durability over their monometallic counterparts. Yet despite intense research efforts, little is understood regarding how to optimize bimetallic surface composition and structure synthetically using rational design principles. Recently, it has been demonstrated that peptide-enabled routes for nanoparticle synthesis result in materials with sequence-dependent catalytic properties, providing an opportunity for rational design through sequence manipulation. In this study, bimetallic PdAu nanoparticles are synthesized with a small set of peptides containing known Pd and Au binding motifs. The resulting nanoparticles were extensively characterized using high-resolution scanning transmission electron microscopy, X-ray absorption spectroscopy and high-energy X-ray diffraction coupled to atomic pair distribution function analysis. Structural information obtained from synchrotron radiation methods were then used to generate model nanoparticle configurations using reverse Monte Carlo simulations, which illustrate sequence-dependence in both surface structure and surface composition. Replica exchange solute tempering molecular dynamic simulations were also used to predict the modes of peptide binding on monometallic surfaces, indicating that different sequences bind to the metal interfaces via different mechanisms. As a testbed reaction, electrocatalytic methanol oxidation experiments were performed, wherein differences in catalytic activity are clearly observed in materials with identical bimetallic composition. Finally, taken together, this study indicates that peptides could be used to arrive at bimetallic surfaces with enhanced catalytic properties, which could be leveraged for rational bimetallic nanoparticle design using peptide-enabled approaches.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of chemical disorder and spin-orbit coupling on the electronic-structure and Fermi-surface topology of YbSb-based monopnictides

Here, in this work, we study the influence of disorder on the electronic structure of YbSb—a rare-earth monopnictide featuring a simple rocksalt (B1) crystal structure and a well-defined Fermi-surface topology—by employing first-principles density-functional theory. We focus on chemical disorder introduced through Te and Al doping, selected based on their thermodynamic stability in alloyed configurations, to understand how such perturbations modify the electronic states of YbSb. Our results indicate that Te doping predominantly introduces electronlike states at the 𝑋 and 𝐿 points, while Al doping leads to a suppression of holelike states at Γ, effectively driving the system from a semimetallic state to one characterized by very narrow-gap behavior at Γ. This modulation of the Fermi surface, particularly the reduction of central hole pockets at Γ, plays a central role in altering interpocket scattering—a mechanism critical for tuning quantum transport properties, including superconductivity. This disorder-driven modulation of the Fermi surface, particularly the suppression of central hole pockets at Γ, controls interpocket scattering, which is essential for optimizing quantum transport properties, including superconductivity. Our results show that disorder can be effectively used for engineering band topology, thereby tuning quantum related response through a tailored electronic structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Joint Test Protocol for Validation of Alternative Low-Emission Surface Preparation/Depainting Technologies for Structural Steel

Headquarters National Aeronautics and Space Administration (NASA) chartered the Acquisition Pollution Prevention (AP2) Office to coordinate agency activities affecting pollution prevention issues identified during system and component acquisition and sustainment processes. The primary objectives of the AP2 Office are to: (1) Reduce or eliminate the use of hazardous materials (HazMats) or hazardous processes at manufacturing, remanufacturing, and sustainment locations. (2) A void duplication of effort in actions required to reduce or eliminate HazMats through joint center cooperation and technology sharing. This project will identify, evaluate and approve alternative surface preparation technologies for use at NASA and Air Force Space Command (AFSPC) installations. Materials and processes will be evaluated with the goal of selecting those processes that will improve corrosion protection at critical systems, facilitate easier maintenance activity, extend maintenance cycles, eliminate flight hardware contamination and reduce the amount of hazardous waste generated. This Joint Test Protocol (JTP) contains the critical requirements and tests necessary to qualify alternative Low-Emission Surface Preparation/Depainting Technologies for Structural Steel Applications. These tests were derived from engineering, performance, and operational impact (supportability) requirements defined by a consensus of NASA and Air Force Space Command (AFSPC) participants. The Field Test Plan (FTP), entitled Joint Test Protocol for Validation of Alternative Low Emission Surface Preparation/Depainting Technologies for Structural Steel, prepared by ITB, defines the field evaluation and testing requirements for validating alternative surface preparation/depainting technologies and supplements the JTP.

Lewis, Pattie↗

Loading and heating of a large flat plate at Mach 7 in the Langley 8-foot high-temperature structures tunnel

Surface pressure and cold-wall heating rate distributions (wall-temperature to total-temperature ratio approximately 0.2) were obtained on a large, flat calibration panel at a nominal Mach number of 7 in an 8-foot high-temperature structures tunnel. Panel dimensions were 42.5 by 60.0 in. Test objectives were: (1) to map available flat-plate loading and heating provided by the facility and (2) to determine effectiveness of leading-edge bluntness, boundary-layer trips, and aerodynamic fences in generating a uniform, streamwise turbulent flow field over the test surface of a flat-sided panel holder.

Deveikis, W. D.↗