Search NASA⌕ Search

SEARCH · Search NASA

Results for “active surface area”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Fabrication of heterostructured BiOBr/Bi{sub 24}O{sub 31}Br{sub 10}/TiO{sub 2} photocatalyst by pyrolysis of MOF composite for dye degradation

The pyrolysis of metal-organic frameworks has emerged as a promising route to synthesize metal oxides with diverse phase compositions, morphologies, sizes and surface areas. The BiOBr/Bi{sub 24}O{sub 31}Br{sub 10}/TiO{sub 2} (BBT) heterostructures have been achieved for the first time by calcining BiOBr/MIL-125(Ti) composite at 500 °C in air. The BBT-2 composite exhibited the highest photocatalytic performance for degradation of RhB under visible light irradiation. The enhanced photocatalytic activity is attributed to narrower band-gaps and synergistic effect originating from the well-aligned straddling band-structures between BiOBr, Bi{sub 24}O{sub 31}Br{sub 10} and TiO{sub 2}, also result in an faster interfacial charge transfer during the photocatalytic reaction. This work could be conductive to the design of heterostructured photocatalysts contained metal oxide by pyrolytic conversion of metal-organic frameworks for significantly improved photocatalytic performance. - Graphical abstract: A novel BiOBr/Bi{sub 24}O{sub 31}Br{sub 10}/TiO{sub 2} heterostructure was achieved by calcining BiOBr/MIL-125(Ti) composite and exhibited the photocatalytic performance for degradation of RhB. Display Omitted - Highlights: • A novel BiOBr/Bi{sub 24}O{sub 31}Br{sub 10}/TiO{sub 2} heterostructure was achieved by calcining BiOBr/MIL-125(Ti) composite. • The heterostructure exhibited the photocatalytic performance for degradation of RhB. • The enhanced photocatalytic activity is attributed to synergistic effect between BiOBr, Bi{sub 24}O{sub 31}Br{sub 10} and TiO{sub 2}. • This work could be conductive to the design of heterostructured photocatalysts by pyrolytic conversion of MOF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

{sup 137}Cs sorption into bentonite from Cidadap-Tasikmalaya as buffer material for disposal demonstration plant facility at Serpong

According to co-location principle, near surface disposal type the disposal demonstration plant facility will be build at Serpong nuclear area. The facility also for anticipation of future needs to provide national facility for the servicing of radwaste management of non-nuclear power plant activity in Serpong Nuclear Area. It is needs to study the material of buffer and backfill for the safety of demonstration plant facility. A local bentonite rock from Cidadap-Tasikmalaya was used as the buffer materials. Objective of experiment is to find out the specific data of sorption characteristic of Cidadap bentonite as buffer material in a radwaste disposal system. Experiments were performed in batch method, where bentonite samples were contacted with CsCl solution labeled with Cs-137 in 100 ml/g liquid:solid ratio. Initial Cs concentration was 10{sup −8} M and to study the effects of ionic strength and Cs concentration in solution, 0.1 and 1.0 M NaCl also CsCl concentration ranging 10{sup −8} - 10{sup −4} M were added in solution. As the indicator of Cs saturated in bentonite samples, Kd value was applied. Affected parameters in the experiment were contact time, effects of ionic strength and concentration of CsCl. Results showed that sorption of Cs by bentonite reached constantly after 16 days contacted, and Kd value was 10.600 ml/g. Effect of CsCl concentration on Kd value may decreased in increased in CsCl concentration. Effect of ionic strength increased according to increased in concentration of background and would effect to Kd value due to competition of Na ions and Cs in solution interacts with bentonite. By obtaining the bentonite character data as buffer material, the results could be used as the basis for making of design and the basic of performance assessment the near surface disposal facility in terms of isolation capacity of radwaste later.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Solvent effects on the heterogeneous growth of TiO 2 nanostructure arrays by solvothermal synthesis

One-dimensional titanium dioxide (TiO 2 ) nanostructure arrays (nanoarrays) are important metal oxide nanomaterials that can be synthesized via facile solvothermal methods. The properties of the organic solvents can impose significant effects on the microstructures and properties of the final products. However, the discussions were limited to the homogeneously nucleated TiO 2 nanomaterials in free-standing powder form, while the solvent effects are less understood during the heterogeneous growth of TiO 2 nanoarrays on a substrate surface. In this work, six organic compounds, namely 2-butanone, n-decane, n-hexane, toluene, ethylene glycol and ethanol, were selected as the solvents for the solvothermal synthesis of TiO 2 nanoarrays on the cordierite monolithic substrates. Special attentions are paid to the morphology, crystallinity, specific surface area, and porosity of the samples. The heterogeneous growth of TiO 2 nanoarrays on substrate surfaces is found to favor the solvents with moderate dielectric constants, which can be partially dissolved in the aqueous solution and modulate the reaction rate during the solvothermal synthesis. Organic solvents with low dielectric constants may result in a complete separation between the precursors and aqueous solution, and therefore slow down the overall reaction, causing the insufficient growth of the nanoarrays. The TiO 2 nanoarrays are obtained with optimum morphology from the combination of 2-butanone and titanium (IV) butoxide as solvent and precusor, respectively, with a high specific surface area up to 56 m 2 /g including cordierite substrate given a micron thickness. When loaded with Pt catalyst, the TiO 2 nanoarray-based monolithic catalysts show excellent low-temperature catalytic activity and hydrothermal stability for the CO and hydrocarbon oxidation under the simulated exhausted conditions. This article shall shed light on a better understanding of the growth mechanism and rational design of TiO 2 nanoarrays for high-performance catalytic converters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CdO-CdS nano-composites as improved photo-catalysts for the generation of hydrogen from water

CdO-CdS nanocomposites were prepared by polyol method followed by heating at 300°C. XRD study confirmed the atomic scale mixing of CdO and CdS nanoparticles, leading to the formation of CdSO{sub 3} phase at the interfacial region between CdO and CdS. The enhancement in photo-catalytic activity for hydrogen generation from water is observed in case of CdO-CdS nanocomposites compared to individual CdS and CdO nanoparticles. Based on XRD, steady state and time resolved luminescence studies and surface area measurements, it is determined that, the fine mixing of CdS and CdO, higher surface area of the composite sample and increase in lifetime of the charge carriers are responsible for the observed increase in hydrogen yield from water when composite sample was used as the photo-catalyst compared to individual components.

36 MATERIALS SCIENCE↗

Understanding the Dynamics of Primary Zn-MnO 2 Alkaline Battery Gassing with Operando Visualization and Pressure Cells

The leading cause for safety vent rupture in alkaline batteries is the intrinsic instability of Zn in the highly alkaline reacting environment. Zn and aqueous KOH react in a parasitic process to generate hydrogen gas, which can rupture the seal and vent the hydrogen along with small amounts of electrolyte, and thus, damage consumer devices. Abusive conditions, particularly deep discharge, are known to accelerate this “gassing” phenomena. In order to understand the fundamental drivers and mechanisms for such gassing behavior, the results from multiphysics modeling, ex-situ microscopy and operando measurements of cell potential, pressure and visualization have been combined. Operando measurements were enabled by the development a new research platform that enables a cross-sectional view of a cylindrical Zn-MnO 2 primary alkaline battery throughout its discharge and recovery. A second version of this cell can actively measure the in-cell pressure during the discharge. It is shown that steep concentration gradients emerge during the cell discharge through a redox electrolyte mechanism, leading to the formation of high surface area Zn deposits that experience rapid corrosion when the cell rests to its open circuit voltage. Such corrosion is paired with the release of hydrogen and high cell pressure – eventually leading to cell rupture.

25 ENERGY STORAGE↗

Surface Signature Characterization at SPE through Ground-Proximal Methods: Methodology Change and Technical Justification

A portion of LANL’s FY15 SPE objectives includes initial ground-based or ground-proximal investigations at the SPE Phase 2 site. The area of interest is the U2ez location in Yucca Flat. This collection serves as a baseline for discrimination of surface features and acquisition of topographic signatures prior to any development or pre-shot activities associated with SPE Phase 2. Our team originally intended to perform our field investigations using previously vetted ground-based (GB) LIDAR methodologies. However, the extended proposed time frame of the GB LIDAR data collection, and associated data processing time and delivery date, were unacceptable. After technical consultation and careful literature research, LANL identified an alternative methodology to achieve our technical objectives and fully support critical model parameterization. Very-low-altitude unmanned aerial systems (UAS) photogrammetry appeared to satisfy our objectives in lieu of GB LIDAR. The SPE Phase 2 baseline collection was used as a test of this UAS photogrammetric methodology.

Geosciences(58)↗

Scalable Solar Fuels Production in A Reactor Train System by Thermochemical Redox Cycling of Novel Nonstoichiometric Perovskites

Hydrogen production via two-step thermochemical water splitting redox cycles using nonstoichiometric redox-active metal oxides has the potential to dramatically increase fuel production rates. At moderate-to-low water splitting temperatures, surface reaction kinetics co-limit the process. In such cases, stable and high surface area microstructures that allow exploitation of the full thermodynamic potential of the materials are essential as is tight thermal integration of the reactor module. This project’s goals were the development of novel nonstoichiometric perovskite oxides with high stability and favorable thermodynamic and kinetic properties, to optimize their microstructure for maximizing the fuel productivity, and to build a prototype reactor train system (RTS) comprising at least one reactor to meet specific performance targets: (1) capable of an in-house solar thermochemical hydrogen (STCH) productivity ≥ 12 mL g -1 for stable continuous operation ≥ 20 cycles; and (2) demonstration of scalable solar fuels production at practical solar reactor level in an industrial-scale concentrated solar tower (CST) using developed perovskites to achieve a hydrogen production rate ≥ 1 g h -1 .

08 HYDROGEN↗

A hillock and cloud model for faculae

A hillock model is used here to explain facular contrasts, allowing faculae to emit more energy than the surrounding unmagnetized photosphere. For downflows, horizontal motions converge near the photosphere and many fibril flux tubes are drawn together to form a large dark area, the sunspot. For upflows, the motions diverge near the photosphere and fibril flux tubes are dispersed over a larger area associated with faculae. The upflows transport material and energy, resulting in hotter than normal temperatures, which in turn cause the gas to expand compared with its surroundings. Buoyancy thus causes a 'network' of patchy hillocks, clouds, or geysers to form which allows the sun to reradiate the energy deficit associated with sunspots by locally increasing the effective surface area of the sun beyond that of a sphere. The consequences of this model for the physical form of the facular manifestation, the appearance of faculae from earth, and the 'energy balance' in active regions are addressed.

Schatten, Kenneth H.↗

Comparison of inversion models using AIRSAR data for Death Valley, California

Polarimetric Airborne Synthetic Aperture Radar (AIRSAR) data were collected for the Geologic Remote Sensing Field Experiment (GRSFE) over Death Valley, California, USA, in September 1989. AIRSAR is a four-look, quid-polarizaiton, three frequency instrument. It collects measurements at C-band (5.66 cm), L-band (23.98 cm), and P-band (68.13 cm), and has a GIFOV of 10 meters and a swath width of 12 kilometers. Because the radar measures at three wavelengths, different scales of surface roughness are measured. Also, dielectric constants can be calculated from the data. The scene used in this study is in Death Valley, California and is located over Trail Canyon alluvial fan, the valley floor, and Artists Drive alluvial fan. The fans are very different in mineralogic makeup, size, and surface roughness. Trail Canyon fan is located on the west side of the valley at the base of the Panamint Range and is a large fan with older areas of desert pavement and younger active channels. The source for the material on southern part of the fan is mostly quartzites and there is an area of carbonate source on the northern part of the fan. Artists Drive fan is located at the base of the Black Mountains on the east side of the valley and is a smaller, young fan with its source mostly from volcanic rocks. The valley floor contains playa and salt deposits that range from smooth to Devil's Golf course type salt pinnacles.

Kierein-Young, Kathryn S.↗

Near-Infrared Spectroscopy and Spectral Mapping of Jupiter and the Galilean Satellites: Results from Galileo's Initial Orbit

The Near Infrared Mapping Spectrometer performed spectral studies of Jupiter and the Galilean satellites during the June 1996 perijove pass of the Galileo spacecraft. Spectra fora5-micrometer hotspot on Jupiter are consistent with the absence of a significant watercloud above 8 bars and with a depletion of water compared to that predicted for solar composition, corroborating results from the Galileo probe. Great Red Spot (GRS) spectral images show that parts of this feature extend upward to 240 millibars, although considerable altitude-dependent structure is found within it. A ring of dense clouds surrounds the GRS and is lower than it by 3 to 7 kilometers. Spectra of Callisto and Ganymede reveal a feature at 4.25 micrometers, attributed to the presence of hydrated minerals or possibly carbon dioxide on their surfaces. Spectra of Europa's high latitudes imply that fine-grained water frost overlies larger grains. Several active volcanic regions were found on lo, with temperatures of 420 to 620 kelvin and projected areas of 5 to 70 square kilometers.

Carlson, R.↗

Decadal Changes in the Antarctic Sea Ice Response to the Changing ENSO in the Last Four Decades

Variation of the sea ice fraction (SIF) over the Ross/Amundsen/Bellingshausen Sea (RAB) is investigated focusing on the decadal difference in time-lagged response to ENSO between the late 20th century (1980-2000, L20) and the early 21st century (2001-2021, E21). Moving correlation of the ENSO index against the SIF and sea surface temperature (SST), respectively, over the RAB region indicates that they are more strongly linked in the L20 than in the E21, with a time lag of up to two seasons. Time-lagged regressions onto the mature phase of El Niño reveal that the SIF decrease and SST increase over the RAB is relatively weaker in the E21 and most pronounced at a shorter time-lag of 0-4 months. In contrast, the SIF melt in the L20 continues to grow and reaches its peak at approximately two season lag (5-7 month). Near-surface wind, upper-level circulation and geopotential height, and wave activity in response to the ENSO in the L20 explain that they create a zonally oriented system of high- and low-pressure areas with a two-season lag, enhancing the poleward meridional flow that plays a key role in sea ice melt in the Ross and Amundsen Sea during El Niño. However, in the E21, this pattern is no longer active at the same lag, and the circulation determines the region of maximum sea ice melt east of the pattern observed in the L20. This study suggests that stronger ENSO on average and higher frequency of eastern Pacific ENSO occurrence in the L20 are associated with this decadal change in the lagged response of the RAB SIF to ENSO.

Young-Kwon Lim↗

Subnanometer and nanometer catalysts, method for preparing size-selected catalysts

Highly uniform cluster based nanocatalysts supported on technologically relevant supports were synthesized for reactions of top industrial relevance. The Pt-cluster based catalysts outperformed the very best reported ODHP catalyst in both activity (by up to two orders of magnitude higher turn-over frequencies) and in selectivity. The results clearly demonstrate that highly dispersed ultra-small Pt clusters precisely localized on high-surface area supports can lead to affordable new catalysts for highly efficient and economic propene production, including considerably simplified separation of the final product. The combined GISAXS-mass spectrometry provides an excellent tool to monitor the evolution of size and shape of nanocatalyst at action under realistic conditions. Also provided are sub-nanometer gold and sub-nanometer to few nm size-selected silver catalysts which possess size dependent tunable catalytic properties in the epoxidation of alkenes. Invented size-selected cluster deposition provides a unique tool to tune material properties by atom-by-atom fashion, which can be stabilized by protective overcoats.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Subnanometer and nanometer catalysts, method for preparing size-selected catalysts

Highly uniform cluster based nanocatalysts supported on technologically relevant supports were synthesized for reactions of top industrial relevance. The Pt-cluster based catalysts outperformed the very best reported ODHP catalyst in both activity (by up to two orders of magnitude higher turn-over frequencies) and in selectivity. The results clearly demonstrate that highly dispersed ultra-small Pt clusters precisely localized on high-surface area supports can lead to affordable new catalysts for highly efficient and economic propene production, including considerably simplified separation of the final product. The combined GISAXS-mass spectrometry provides an excellent tool to monitor the evolution of size and shape of nanocatalyst at action under realistic conditions. Also provided are sub-nanometer gold and sub-nanometer to few nm size-selected silver catalysts which possess size dependent tunable catalytic properties in the epoxidation of alkenes. Invented size-selected cluster deposition provides a unique tool to tune material properties by atom-by-atom fashion, which can be stabilized by protective overcoats.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Non-platinum group metal electrocatalysts using metal organic framework materials and method of preparation

A method of preparing a nitrogen containing electrode catalyst by converting a high surface area metal-organic framework (MOF) material free of platinum group metals that includes a transition metal, an organic ligand, and an organic solvent via a high temperature thermal treatment to form catalytic active sites in the MOF. At least a portion of the contained organic solvent may be replaced with a nitrogen containing organic solvent or an organometallic compound or a transition metal salt to enhance catalytic performance. The electrode catalysts may be used in various electrochemical systems, including a proton exchange membrane fuel cell.

Liu, Di-Jia↗

Non-platinum group metal electrocatalysts using metal organic framework materials and method of preparation

A method of preparing a nitrogen containing electrode catalyst by converting a high surface area metal-organic framework (MOF) material free of platinum group metals that includes a transition metal, an organic ligand, and an organic solvent via a high temperature thermal treatment to form catalytic active sites in the MOF. At least a portion of the contained organic solvent may be replaced with a nitrogen containing organic solvent or an organometallic compound or a transition metal salt to enhance catalytic performance. The electrode catalysts may be used in various electrochemical systems, including a proton exchange membrane fuel cell.

Liu, Di-Jia↗

Non-platinum group metal electrocatalysts using metal organic framework materials and method of preparation

A method of preparing a nitrogen containing electrode catalyst by converting a high surface area metal-organic framework (MOF) material free of platinum group metals that includes a transition metal, an organic ligand, and an organic solvent via a high temperature thermal treatment to form catalytic active sites in the MOF. At least a portion of the contained organic solvent may be replaced with a nitrogen containing organic solvent or an organometallic compound or a transition metal salt to enhance catalytic performance. The electrode catalysts may be used in various electrochemical systems, including an alkaline fuel cell.

Liu, Di-Jia↗

Hematite homogeneous core/shell hierarchical spheres: Surfactant-free solvothermal preparation and their improved catalytic property of selective oxidation

Solvothermal synthesis is an efficient synthetic method for preparing nano and micromaterials. Preparation of hematite through alcoholysis of ferric ion under solvothermal condition has been carried out at low concentrations. In this paper, Fe{sub 2}O{sub 3} homogeneous core/shell hierarchical nanostructures were synthesized via solvothermal treatment of FeCl{sub 3}{center_dot}6H{sub 2}O and ethanol. The achievements of such structures can be attributed to two important factors: high temperature and high concentration. Besides, the crystal water and reaction time were also important factors to the synthesis of hematite. The prepared samples were characterized using X-ray powder diffraction, Raman spectra, scanning electron microscopy equipped with an energy-dispersive X-ray spectrometer, transmission electron microscopy and Brunauer-Emmett-Teller surface area and pore size distribution. X-ray photoelectron spectroscopy showed a satellite peak at 719.8 eV, which is the characteristic peak of Fe(III). The formation mechanism of the spheres and the effects of the reactant concentrations and reaction temperatures have been discussed. Moreover, the enhanced catalytic activity of the spheres has also been investigated through oxidation of benzyl alcohol to benzaldehyde with high conversion (42%) and selectivity (95%). - Graphical abstract: Fe{sub 2}O{sub 3} homogeneous core/shell hierarchical microspheres were synthesized by solvothermal method. Owing to the special structure, the synthesized Fe{sub 2}O{sub 3} microspheres exhibit a superior catalytic activity in benzyl oxidation. Highlights: Black-Right-Pointing-Pointer Hierarchical Fe{sub 2}O{sub 3} core/shell microspheres were synthesized. Black-Right-Pointing-Pointer Microspheres were assembled by {beta}-FeOOH. Black-Right-Pointing-Pointer The sample exhibits a superior catalytic activity and selectivity. Black-Right-Pointing-Pointer The high activity and selectivity are due to the hierarchical core/shell structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Radio-Ecological Situation in the Area of the Priargun Production Mining and Chemical Association - 13522

'The Priargun Production Mining and Chemical Association' (hereinafter referred to as PPMCA) is a diversified mining company which, in addition to underground mining of uranium ore, carries out refining of such ores in hydrometallurgical process to produce natural uranium oxide. The PPMCA facilities are sources of radiation and chemical contamination of the environment in the areas of their location. In order to establish the strategy and develop criteria for the site remediation, independent radiation hygienic monitoring is being carried out over some years. In particular, this monitoring includes determination of concentration of the main dose-forming nuclides in the environmental media. The subjects of research include: soil, grass and local foodstuff (milk and potato), as well as media of open ponds (water, bottom sediments, water vegetation). We also measured the radon activity concentration inside surface workshops and auxiliaries. We determined the specific activity of the following natural radionuclides: U-238, Th-232, K-40, Ra-226. The researches performed showed that in soil, vegetation, groundwater and local foods sampled in the vicinity of the uranium mines, there is a significant excess of {sup 226}Ra and {sup 232}Th content compared to areas outside the zone of influence of uranium mining. The ecological and hygienic situation is as follows: - at health protection zone (HPZ) gamma dose rate outdoors varies within 0.11 to 5.4 μSv/h (The mean value in the reference (background) settlement (Soktui-Molozan village) is 0.14 μSv/h); - gamma dose rate in workshops within HPZ varies over the range 0.14 - 4.3 μSv/h. - the specific activity of natural radionuclides in soil at HPZ reaches 12800 Bq/kg and 510 Bq/kg for Ra-226 and Th-232, respectively. - beyond HPZ the elevated values for {sup 226}Ra have been registered near Lantsovo Lake - 430 Bq/kg; - the radon activity concentration in workshops within HPZ varies over the range 22 - 10800 Bq/m{sup 3}. The seasonal dependence of radon activity concentration is observed in the air of workshops (radon levels are lower in winter in comparison with spring-summer period). - in drinking water, intervention levels by gross alpha activity and by some radionuclides, in particular by Rn-222, are in excess. Annual effective dose of internal exposure due to ingestion of such water will be 0.14-0.28 mSv. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗