Search NASA⌕ Search

SEARCH · Search NASA

Results for “complex solids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Complex Electric Modulus Spectroscopy of (MnFe{sub 2}O{sub 4}){sub x}/CuTl-1223 Nanoparticles-Superconductor Composites

Manganese ferrite (MnFe{sub 2}O{sub 4}) nanoparticles and Cu{sub 0.5}Tl{sub 0}.{sub 5}Ba{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10−δ}(CuTl-1223) superconducting phase were synthesized by sol-gel and solid-state reaction methods, respectively. Different contents of MnFe{sub 2}O{sub 4} nanoparticles were added in CuTl-1223 superconducting matrix to get (MnFe{sub 2}O{sub 4}){sub x}/CuTl-1223; x = 0∼2.0 wt% nanoparticles-superconductor composites. Complex electric modulus spectroscopy measurements of (MnFe{sub 2}O{sub 4}){sub x}/CuTl-1223 composites were carried out at different test frequencies from 20 Hz to 10 MHz and at different operating temperatures from 78 to 253 K to analyze and interpret the dynamical aspects of electrical transport phenomena (i.e., such as carrier hopping rate, conductivity, and blocking factor). The complex electric modulus spectra showed the effects of both grains and grain-boundaries on electrical properties. The capacitance of grain-boundaries was found higher than that of grains. The capacitive behavior of grains was increased and that of grain-boundaries was decreased with increasing operating temperature for all these samples. Blocking factor of these composites was increased with increasing contents of MnFe{sub 2}O{sub 4} nanoparticles. Shifting of peaks in imaginary part of modulus spectra towards lower frequency with increasing contents of these nanoparticles showed non-Debye type relaxation phenomenon in the material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural chemistry of penta- and hexanitrato thorium($\tiny{IV}$) complexes isolated using N–H donors

In this study, a series of fifteen tetravalent thorium phases were prepared. The compounds were isolated from acidic aqueous nitrate solutions using protonated nitrogen heterocycles of varying hydrogen-bond donation strength. Structural analysis via single crystal X-ray diffraction showed that the structures are built from pentanitrato, [Th(NO 3 ) 5 (H 2 O) 2 ] 1- , and hexanitrato, [Th(NO 3 ) 6 ] 2- , molecular units, with the latter being far more prevalent in the solid state. The vibrational properties of the compounds were examined using Raman and IR spectroscopy; the spectra are dominated by stretches characteristic of nitrate and the organic ions. The relative energetics of nitrate complexation was examined using electronic structure theory. These results confirmed that there are clear thermodynamic sinks for the penta- and hexanitrato structural units that were observed experimentally. Additionally, electrostatic surface potentials (ESPs) were calculated in an effort to better understand the counterion stabilization of the complexes. The ESP surfaces showed that the position of the water and nitrate molecules and the coordination geometry of the metal complex had a clear effect on the polarizability of the two structural motifs. Despite limited speciation of the Th–nitrate structural units, the compounds exhibit rich supramolecular chemistry resulting from hydrogen bonding of the Th complexes with the organic N–H donors and π–π stacking interactions from the protonated N-heterocycles.

36 MATERIALS SCIENCE↗

Design of a symmetry‐broken tetrahedral protein cage by a method of internal steric occlusion

Abstract Methods in protein design have made it possible to create large and complex, self‐assembling protein cages with diverse applications. These have largely been based on highly symmetric forms exemplified by the Platonic solids. Prospective applications of protein cages would be expanded by strategies for breaking the designed symmetry, for example, so that only one or a few (instead of many) copies of an exterior domain or motif might be displayed on their surfaces. Here we demonstrate a straightforward design approach for creating symmetry‐broken protein cages able to display singular copies of outward‐facing domains. We modify the subunit of an otherwise symmetric protein cage through fusion to a small inward‐facing domain, only one copy of which can be accommodated in the cage interior. Using biochemical methods and native mass spectrometry, we show that co‐expression of the original subunit and the modified subunit, which is further fused to an outward‐facing anti‐GFP DARPin domain, leads to self‐assembly of a protein cage presenting just one copy of the DARPin protein on its exterior. This strategy of designed occlusion provides a facile route for creating new types of protein cages with unique properties.

Gladkov, Nika↗

Stereo-DIC Challenge 1.0 – Rigid Body Motion of a Complex Shape

Background Stereo-DIC is a widely used optical measurement technique that provides a dense full-field 3D measurement of the shape, displacement, and strain of a solid sample. When compared with 2D-DIC, Stereo-DIC provides greater flexibility and expands its use beyond flat, planar specimens. Furthermore, the widespread availability of commercial systems has led to the adoption of the technique throughout industry, academia, and government research labs. Objective Even though some research has been done to understand the effects of different experimental and stereo-DIC parameters, no reference is available to benchmark and compare the performance of current stereo-DIC algorithms to each other. Methods This paper provides the description and analysis of a carefully controlled 3D experiment and associated images used to compare the results from five subset based DIC software packages. Both the images and analysis codes used in this paper to compare the results are described here and are available for download and use for continued research. Results We show that over a very large range of motion, the 3D errors are very small, less than 80μm over a travel of ±20 mm out-of-plane and ±20 mm in-plane. While all codes performed similarly, there are important differences noted in the paper. Conclusion The image sets and results comparison software are hosted by the International DIC Society (www.iDICs.org) and are freely available for download and analysis for comparison with results in this paper. Furthermore, it is hoped that this set of images can be used for future research in improving stereo-DIC by future authors.

Algorithms comparison↗

Atomic-scale properties of Ni-based FCC ternary, and quaternary alloys

The aim of our study is to characterize some atomic-scale properties of Ni-based FCC multicomponent alloys. For this purpose, we use Monte Carlo method combined with density functional theory calculations to study short-range order (SRO), atomic displacements, electronic density of states, and magnetic moments in equimolar ternary NiCrCo, and quaternary NiCrCoFe alloys. The salient features for the ternary alloy are a negative SRO parameter between Ni Cr and a positive between Cr Cr pairs as well as a weakly magnetic state. For the quaternary alloy we predict negative SRO parameter for Ni Cr and Ni Fe pairs and positive for Cr Cr and Fe Fe pairs. Atomic displacements for both ternary and quaternary alloys are negligible. In contrast to the ternary, the quaternary alloy shows a complex magnetic structure. The electronic structure of the ternary and quaternary alloys shows differences near the Fermi energy between a random solid solution and the predicted structure with SRO. Despite that, the calculated EXAFS spectra does not show enough contrast to discriminate between random and ordered structures. Finally, the predicted SRO has an impact on point-defect energetics, electron phonon coupling and thermodynamic functions and thus, SRO should not be neglected when studying properties of these two alloys.

36 MATERIALS SCIENCE↗

In situ XANES and EXAFS Analysis of Redox Active Fe Center Ionic Liquids

We apply in situ X-Ray Absorption Near Edge Spectroscopy (XANES) and Extended X-Ray Absorption Fine Structure (EXAFS) techniques to a metal center ionic liquid undergoing oxidation and reduction in a three electrode spectroscopic cell. Furthermore, the determination of the extent of reduction under negative bias on the working electrode and the extent of oxidation are determined after pulse voltammetry to quiescence. While the ionic liquid undergoes full oxidation, it undergoes only partial reduction, likely due to transport issues on the timescale of the experiment. Nearest neighbor Fe-O distances in the fully oxidized state match well to expected values for similarly coordinated solids, but reduction does not result in an extension of the Fe-O bond length, as would be expected from comparisons to the solid phase. Instead, little change in bond length is observed. Finally, we suggest that this may be due to a more complex interaction between the monodentate ligands of the metal center anion and the surrounding charge cloud, rather than straightforward electrostatics between the metal center and the nearest neighbor grouping.

25 ENERGY STORAGE↗

Segmentation and Classification of Fission as Pores in Reactor Irradiated Annular U–10Zr Metallic Fuel Using Machine Learning Models

Metallic fuels, particularly U—10Zr, are promising candidates for next-generation sodium-cooled fast reactors. Irradiation of nuclear fuels in reactors can lead to the formation of solid and gas fission product which subsequently forms microstructural pores, deteriorating fuel performance. Due to the massive amount of pores and complex phases formed, a quantitative description of fission gas pores is not yet available, preventing the development of microstructure-informed fuel performance modeling for fuel qualification. This paper applied a pre-trained deep learning model to ~10,260 high magnification scanning electron microscopy images. This method increased the accuracy of fission gas pore segmentation and allows statistical features to be extracted which cannot be achieved manually. A pre-trained decision tree model worked on the segemenation results and further classified the pores into different categories to produce a correlation between the pores, movement of lanthanides, and temperature gradient during irradiation. Finally, this paper emphasizes the potentials of machine learning models to accelerate fuel research, development, and qualification for advanced reactors.

36 MATERIALS SCIENCE↗

Conversion reaction of vanadium sulfide electrode in the lithium-ion cell: Reversible or not reversible?

With the increasing interest in transition metal chalcogenides, sulfide minerals containing the disulfide unit (S 2 2- ) have gained intensive attention for potential applications in energy storage devices, such as lithium-ion batteries (LIBs). Vanadium tetrasulfide (VS 4 ) possesses a unique linear-chain structure with a Peierls distortion and shows great promise for application in LIBs. However, its electrochemical reaction mechanism is still controversial, mainly due to the amorphous nature of the intermediates and final products. Here, by applying multiple X-ray spectroscopies, we reveal that VS 4 undergoes lithium intercalation and conversion reactions sequentially during the first discharge process, which are partially reversible in the subsequent charge process. However, an anomalous intercalation/conversion mixed reaction mechanism is dominant for the second cycle, mainly owing to the amorphization of the VS 4 electrode during the first cycle. In addition, the sulfur atoms are also involved in the redox reaction during cycling, with the anionic contribution of S 2 2- ↔ 2S 2- transformation. Furthermore, we find that the formation process of the solid electrolyte interphase is highly dynamic during the discharge and charge processes. Finally, the present study provides deeper insights into the complex reaction mechanism of VS 4 . This knowledge can accelerate the development of high-performance VS 4 -based electrode materials for LIBs.

36 MATERIALS SCIENCE↗

Phase Control of Nanocrystalline Inclusions in Bioprecipitated Titania with a Panel of Mutant Silica-Binding Proteins

The biomimetic route to inorganic synthesis presents an opportunity to produce complex materials with superior properties under ambient conditions and from nontoxic precursors. While there has been significant progress in using solid-binding peptides (SBPs), proteins, and organisms to produce a variety of inorganic and hybrid structures, it has been more challenging to understand the interplay of solution conditions and solid-binding peptide (SBP) sequence, structure, and self-association on synthetic outcomes. Here, we show that fusing the Car9 silica-binding peptide—but not the silaffin-derived R5 peptide—to superfolder green fluorescent protein (sfGFP) enhances the ability of micromolar concentrations of protein to induce rapid titania (TiO 2 ) precipitation from acidified solutions of tetrakis(di-lactato)-oxo-titanate (TiBALDH). TiO 2 is produced stoichiometrically and although predominantly amorphous, contains nanosized anatase and monoclinic TiO 2 (B) inclusions. Remarkably, the phase of these nanocrystallites can be tuned from about 80% TiO 2 (B) to about 65% anatase by using Car9 mutants impaired in their ability to drive the formation of higher-order sfGFP-Car9 oligomers. Our results suggest that the presentation of multiple basic side chains in an extended plane formed by SBP self-association is critical to template the formation of monoclinic crystallites and underscore the subtle influence that single or dual substitutions in dodecameric SBPs can exert on the yield and crystallinity of biomineralized inorganics.

mutagenesis↗

Rapid Polyolefin Plastic Hydrogenolysis Mediated by Single-Site Heterogeneous Electrophilic/Cationic Organo-group IV Catalysts

A homologous series of cationic electrophilic group IV metal hydrides (M = Ti, Zr, Hf) created by chemisorption of the corresponding MNp 4 precursors on highly Brønsted acidic sulfated alumina (AlS) to yield loosely coordinated surface AlS/MNp 2 (Np = neopentyl) species are systematically characterized by ICP, EXAFS/XANES, DRIFTS, and solid-state high-resolution multidimensional NMR spectroscopy (SSNMR), as well as by energy span DFT computation. With effective stirring, these complexes readily undergo reaction with H 2 to yield AlS/M(alkyl)H species, which are highly active for the hydrogenolysis of diverse commercial polyethylenes, α-olefin-ethylene copolymers, isotactic polypropylene, and postconsumer polyolefins including high-density polyethylenes, yielding medium and small linear and branched hydrocarbons at turnover frequencies as high as 36,300 h –1 at 200 °C/17 atm H 2 for M = Zr. For given polyolefin and reaction conditions, turnover frequencies scale approximately as M = Zr > Hf > Ti, whereas catalyst thermal stability scales approximately as M = Hf ≈ Zr > Ti, and these trends are qualitatively understandable from the DFT analysis. These catalytic results reveal that the AlS/Hf(R)H-mediated hydrogenolysis favors wax-like and liquid products, whereas the AlS/Zr(R)H-mediated hydrogenolysis can be tuned between gases and liquids. Finally, DFT analysis identifies β-alkyl elimination as the turnover-limiting C–C scission process, which is particularly facile in these cationic d 0 complexes but not so in the neutrally charged analogues.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crown Ether Modulation Enables over 23% Efficient Formamidinium-Based Perovskite Solar Cells

The use of molecular modulators to reduce the defect density at the surface and grain boundaries of perovskite materials has been demonstrated to be an effective approach to enhance the photovoltaic performance and device stability of perovskite solar cells. Herein, we employ crown ethers to modulate perovskite films, affording passivation of undercoordinated surface defects. This interaction has been elucidated by solid-state nuclear magnetic resonance and density functional theory calculations. The crown ether hosts induce the formation of host-guest complexes on the surface of the perovskite films, which reduces the concentration of surface electronic defects and suppresses nonradiative recombination by 40%, while minimizing moisture permeation. As a result, we achieved substantially improved photovoltaic performance with power conversion efficiencies exceeding 23%, accompanied by enhanced stability under ambient and operational conditions. This work opens a new avenue to improve the performance and stability of perovskite-based optoelectronic devices through supramolecular chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Visualizing temperature-dependent phase stability in high entropy alloys

High entropy alloys (HEAs) contain near equimolar amounts of five or more elements and are a compelling space for materials design. In the design of HEAs, great emphasis is placed on identifying thermodynamic conditions for single-phase and multi-phase stability regions, but this process is hindered by the difficulty of navigating stability relationships in high-component spaces. Traditional phase diagrams use barycentric coordinates to represent composition axes, which require ( N – 1) spatial dimensions to represent an N -component system, meaning that HEA systems with N > 4 components cannot be readily visualized. Here, we propose forgoing barycentric composition axes in favor of two energy axes: a formation-energy axis and a ‘reaction energy’ axis. These Inverse Hull Webs offer an information-dense 2D representation that successfully captures complex phase stability relationships in N ≥ 5 component systems. We use our proposed diagrams to visualize the transition of HEA solid-solutions from high-temperature stability to metastability upon quenching, and identify important thermodynamic features that are correlated with the persistence or decomposition of metastable HEAs.

Chemistry↗

Electron transfer in nonpolar media

The Marcus theory of electron transfer views fluctuating orientations of permanent dipoles as the nuclear mode bringing the donor and acceptor into the tunneling resonance. Electronic polarization of the solvent is excluded as the fast mode adiabatically following the electronic density. This view, valid for solids, does not apply to molecular liquids where molecular translations (density fluctuations) modulate the induction interaction of the donor-acceptor complex with the solvent. This mechanism of promoting radiation-less electronic transitions is considered here in the framework of the perturbation liquid-state theory. The reorganization energy of electron transfer in nonpolar solvents is nonzero and reaches the values of 0.1–0.3 eV for typical molecular sizes and solvents used in applications. The reorganization energy scales quadratically with the molecular polarizability of the solvent and decays as the inverse fifth power with the size of the donor and acceptor. The combination of the entropic character of the density fluctuations, driven by re-packing of molecular cores, with the short range of induction solute–solvent interactions leads to the violation of the fluctuation–dissipation theorem for the variance of the donor-acceptor energy gap. An explicit, approximately hyperbolic, dependence of the reorganization energy on temperature is predicted. It leads to a non-Arrhenius kinetic law for the rate constant of electron transfer in nonpolar liquid solvents.

14 SOLAR ENERGY↗

Investigating trends in actinide covalency and magnetism with 35/37 Cl SSNMR spectroscopy and first-principles calculations

Solid-state NMR (SSNMR) spectroscopy is a powerful technique for studying actinide chemistry but has been significantly limited due to the complex paramagnetism, and radiological hazards presented by these materials. Lanthanide and actinide salts often feature magnetic ordering and can be paramagnetic, ferromagnetic, or antiferromagnetic depending on temperature and electronic structure. Paramagnetic interactions can manifest in SSNMR both as secular spectral shifts and/or couplings as well as contributions from non-secular relaxation. Both effects can be directly measured with NMR and used to extrapolate rich chemical information such as coordination environments, bonding characteristics, local molecular dynamics, and correlation times. Typically, these studies are carried out on high-γ and highly abundant NMR-active isotopes (e.g., 1 H, 6/7 Li, 19 F, 23 Na, etc.) or on enriched rare isotopes (e.g., 2 H and 17 O), which can be expensive. Herein, we present a facile methodology to measure the 35/37 Cl electric-field gradient (EFG) and paramagnetic shift anisotropy (SA) tensor components using static wideline SSNMR measurements of LaCl 3 , NdCl 3 , UCl 3 , and UCl 4 . The static powder spectra were measured with both 35 Cl and 37 Cl SSNMR to increase the fidelity of the extracted tensor parameters. Variable temperature NMR of a select case confirms the Curie–Weiss paramagnetism. Relaxation measurements of both nuclei further corroborate observations owing to the paramagnetic relaxation enhancement and reveal simultaneous quadrupolar relaxation mechanisms. Density functional theory (DFT) calculations using Hubbard U corrections to the uranium valence orbitals show excellent agreement with experimental EFG tensor parameters and help describe the bonding characteristics in these lanthanide and actinide systems.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Raman spectroscopic study of plasma-treated salmon DNA

In this research, we studied the effect of plasma treatment on the optical/structural properties of the deoxyribonucleic acid (DNA) extracted from salmon sperm. DNA-cetyltrimethylammonium (CTMA) films were obtained by complexation of DNA with CTMA. Circular dichroism (CD) and Raman spectra indicated that DNA retained its double helical structure in the solid film. The Raman spectra exhibited several vibration modes corresponding to the nuclear bases and the deoxyribose-phosphate backbones of the DNA, as well as the alkylchains of CTMA. Dielectric-barrier-discharge (DBD) plasma treatment induced structural modification and damage to the DNA, as observed by changes in the ultraviolet-visible absorption, CD, and Raman spectra. The optical emission spectra of the DBD plasma confirmed that DNA modification was induced by plasma ions such as reactive oxygen species and reactive nitrogen species.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Revealing Possible Coherence Limiting Sources in Superconducting Qubit with Advanced Electron Microscopy

Superconducting materials hold great potential for solid-state quantum computing. Their fabrication relies on established semiconductor fabrication techniques, such as thin film deposition and lithography, but the complex processing steps can result in defects at the qubits' interfaces and surfaces that can negatively impact coherence time. To improve superconducting qubit performance, it is essential to understand the structural features, at the atomic scale, that may act as sources of decoherence limiting factor in both the Josephson junction (JJ) and resonators, which are key components of superconducting qubit. This talk will present our recent studies on the microstructures in a 2D-transmon, with an emphasis on the JJ. For this research, a combination of advanced microscopy techniques, including high-resolution (S)TEM imaging, and spectroscopy (EDS and EELS) are used to identify possible coherence-limiting defects or structural features.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling phase transformations in Mn-rich disordered rocksalt cathodes with machine-learning interatomic potentials

Mn-rich disordered rocksalt (DRX) cathode materials exhibit a phase transformation from a disordered to a partially disordered spinel-like structure (δ-phase) during electrochemical cycling. Here, in this computational study, we use charge-informed molecular dynamics with a fine-tuned CHGNet foundation potential to investigate the phase transformation in LixMn 0.8 Ti 0.1 O 1.9 F 0.1 . Our results indicate that transition metal migration occurs and reorders to form the spinel-like ordering in an FCC anion framework. The transformed structure contains a higher concentration of nontransition metal (0-TM) face-sharing channels, which are known to improve Li transport kinetics. Analysis of the Mn valence distribution suggests that the appearance of tetrahedral Mn 2+ is a consequence of spinel-like ordering, rather than the trigger for cation migration as previously suggested. Calculated equilibrium intercalation voltage profiles demonstrate that the δ-phase, unlike the ordered spinel, exhibits solid-solution signatures at low voltage. A higher Li capacity is obtained than in the DRX phase. This study provides atomic insights into solid-state phase transformation and its relation to experimental electrochemistry, highlighting the potential of machine-learning interatomic potentials for understanding complex oxide materials.

Zhong, Peichen [University of California, Berkeley↗