Search NASA⌕ Search

SEARCH · Search NASA

Results for “computer simulation model development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Simulation and analysis of antennas radiating in a complex environment

A numerical procedure for computing the high-frequency radiation patterns of antennas mounted on curved surfaces is described. The procedure utilizes the uniform geometrical theory of diffraction to examine the antenna system's performance, which is dependent on antenna radiation patterns. Composite ellipsoid models of fuselage shapes are developed and the formation of geodesic paths on the models is studied; the shape of the fuselage affects the radiation patterns. The actual field radiated by the source and scattered by the structure is calculated using the ray field technique. The numerical solution is applied to the analysis of the antenna radiation patterns of a military aircraft, private aircraft, and the Space Shuttle orbiter. Good correlation between the calculated and measured radiation patterns is noted verifying the usefulness and accuracy of the numerical procedure.

Kim, J. J.↗
NASA NTRS2003

Numerical Simulation of Turbulent MHD Flows Using an Iterative PNS Algorithm

A new parabolized Navier-Stokes (PNS) algorithm has been developed to efficiently compute magnetohydrodynamic (MHD) flows in the low magnetic Reynolds number regime. In this regime, the electrical conductivity is low and the induced magnetic field is negligible compared to the applied magnetic field. The MHD effects are modeled by introducing source terms into the PNS equation which can then be solved in a very efficient manner. To account for upstream (elliptic) effects, the flowfields are computed using multiple streamwise sweeps with an iterated PNS algorithm. Turbulence has been included by modifying the Baldwin-Lomax turbulence model to account for MHD effects. The new algorithm has been used to compute both laminar and turbulent, supersonic, MHD flows over flat plates and supersonic viscous flows in a rectangular MHD accelerator. The present results are in excellent agreement with previous complete Navier-Stokes calculations.

Kato, Hiromasa↗
NASA NTRS2019

Scale-Resolving Simulations of Laminar-to-Turbulent Transition in Swept-Wing Flow

Aerodynamic shape optimization of swept Natural Laminar Flow (NLF) wing design plays an important role for the development of future energy-efficient commercial transport aircraft. Lack of predictive laminar-to-turbulent transition modeling capabilities is still limiting the extent to which design can rely on computational tools, while making costly wind tunnel and flight tests a necessity. Prediction of transition on practical 3D wing geometries using the e (sup N) method coupled with laminar boundary layer and linear stability codes or local statistical correlation CFD (Computational Fluid Dynamics) models such as the gamma - Re (sub theta) Langtry-Menter model have proven challenging, whereas transitional hybrid RANS-LES solvers have shown encouraging but still mitigated results.

Scale-resolving↗
NASA NTRS2002

Human Motion Tracking and Glove-Based User Interfaces for Virtual Environments in ANVIL

The Army/NASA Virtual Innovations Laboratory (ANVIL) at Marshall Space Flight Center (MSFC) provides an environment where engineers and other personnel can investigate novel applications of computer simulation and Virtual Reality (VR) technologies. Among the many hardware and software resources in ANVIL are several high-performance Silicon Graphics computer systems and a number of commercial software packages, such as Division MockUp by Parametric Technology Corporation (PTC) and Jack by Unigraphics Solutions, Inc. These hardware and software platforms are used in conjunction with various VR peripheral I/O (input / output) devices, CAD (computer aided design) models, etc. to support the objectives of the MSFC Engineering Systems Department/Systems Engineering Support Group (ED42) by studying engineering designs, chiefly from the standpoint of human factors and ergonomics. One of the more time-consuming tasks facing ANVIL personnel involves the testing and evaluation of peripheral I/O devices and the integration of new devices with existing hardware and software platforms. Another important challenge is the development of innovative user interfaces to allow efficient, intuitive interaction between simulation users and the virtual environments they are investigating. As part of his Summer Faculty Fellowship, the author was tasked with verifying the operation of some recently acquired peripheral interface devices and developing new, easy-to-use interfaces that could be used with existing VR hardware and software to better support ANVIL projects.

Joseph D. Dumas, II↗
NASA NTRSDate not supplied

AMMPER: a user-friendly agent-based model that recapitulates simple metabolic responses of yeast to deep-space radiation

For humans venturing to deep space, radiation exposure poses a major health risk. Fundamental research into the biological effects of space radiation are essential for enabling exploration, and the first experimental organisms we send to deep space will be microbial. Yet there are many ways in which microorganisms are likely to experience the effects of high-energy particle radiation (such as Galactic Cosmic Rays) differently from multicellular animals, partly due to the simple fact that microbes are small and unicellular-- less likely to get hit in the first place, and less likely to communicate damage between cells. Computational modeling can aid in designing experiments and predicting the biological effects of radiation, but thus far particle radiation models have not focused on microbes. Here we present the latest developments in AMMPER, the Agent-based Model for Microbial Populations Exposed to Radiation. Originally written in 2021, AMMPER is a Python-based model that incorporates radiation track data from NASA's RITRACKS software and simulates the growth, damage, and death of yeast cells in 3D. It is now freely available as an open-source package on NASA's GitHub repository. Recent improvements include the ability to simulate the dynamics of alamarBlue, a color-changing redox dye commonly used to track metabolic activity in microbial spaceflight experiments. We demonstrate that a simple blue-pink-clear transition model is able to recapitulate key features observed in empirical data from ground studies. AMMPER also includes a new graphical user interface and introductory tutorial to facilitate ease of use by a wider audience. AMMPER can help us to understand how spatially heterogeneous particle radiation damage at the single-cell level can translate to growth differences at the population level, ultimately allowing us to better interpret experiments using microbes as model organisms and how well their results apply to humans.

yeast↗
NASA NTRS1994

New Computer Simulations of Macular Neural Functioning

We use high performance graphics workstations and supercomputers to study the functional significance of the three-dimensional (3-D) organization of gravity sensors. These sensors have a prototypic architecture foreshadowing more complex systems. Scaled-down simulations run on a Silicon Graphics workstation and scaled-up, 3-D versions run on a Cray Y-MP supercomputer. A semi-automated method of reconstruction of neural tissue from serial sections studied in a transmission electron microscope has been developed to eliminate tedious conventional photography. The reconstructions use a mesh as a step in generating a neural surface for visualization. Two meshes are required to model calyx surfaces. The meshes are connected and the resulting prisms represent the cytoplasm and the bounding membranes. A finite volume analysis method is employed to simulate voltage changes along the calyx in response to synapse activation on the calyx or on calyceal processes. The finite volume method insures that charge is conserved at the calyx-process junction. These and other models indicate that efferent processes act as voltage followers, and that the morphology of some afferent processes affects their functioning. In a final application, morphological information is symbolically represented in three dimensions in a computer. The possible functioning of the connectivities is tested using mathematical interpretations of physiological parameters taken from the literature. Symbolic, 3-D simulations are in progress to probe the functional significance of the connectivities. This research is expected to advance computer-based studies of macular functioning and of synaptic plasticity.

Ross, Muriel D.↗
NASA NTRS1982

Review of NASA antiskid braking research

NASA antiskid braking system research programs are reviewed. These programs include experimental studies of four antiskid systems on the Langley Landing Loads Track, flights tests with a DC-9 airplane, and computer simulation studies. Results from these research efforts include identification of factors contributing to degraded antiskid performance under adverse weather conditions, tire tread temperature measurements during antiskid braking on dry runway surfaces, and an assessment of the accuracy of various brake pressure-torque computer models. This information should lead to the development of better antiskid systems in the future.

Tanner, J. A.↗
NASA NTRS1987

Numerical simulation of a plane turbulent mixing layer, with applications to isothermal, rapid reactions

A hybrid method has been developed for the numerical prediction of turbulent mixing in a spatially-developing, free shear layer. Most significantly, the computation incorporates the effects of large-scale structures, Schmidt number and Reynolds number on mixing, which have been overlooked in the past. In flow field prediction, large-eddy simulation was conducted by a modified 2-D vortex method with subgrid-scale modeling. The predicted mean velocities, shear layer growth rates, Reynolds stresses, and the RMS of longitudinal velocity fluctuations were found to be in good agreement with experiments, although the lateral velocity fluctuations were overpredicted. In scalar transport, the Monte Carlo method was extended to the simulation of the time-dependent pdf transport equation. For the first time, the mixing frequency in Curl's coalescence/dispersion model was estimated by using Broadwell and Breidenthal's theory of micromixing, which involves Schmidt number, Reynolds number and the local vorticity. Numerical tests were performed for a gaseous case and an aqueous case. Evidence that pure freestream fluids are entrained into the layer by large-scale motions was found in the predicted pdf. Mean concentration profiles were found to be insensitive to Schmidt number, while the unmixedness was higher for higher Schmidt number. Applications were made to mixing layers with isothermal, fast reactions. The predicted difference in product thickness of the two cases was in reasonable quantitative agreement with experimental measurements.

Lin, P.↗
NASA NTRS1986

A review of modelling techniques for the open and closed-loop dynamics of large space systems

This paper reviews the steps in the development of mathematical models that can be used to simulate the in-orbit dynamic behavior of large flexible systems. A general continuum formulation is compared with the hybrid coordinate formulation and also a finite element representation of the total system. A review of structural analysis routines emphasizes the use of computer generated graphics to help understand the different modal elastic shape functions of complex systems. Numerical techniques employed to synthesize shape and attitude control laws are summarized. Finally, the modeling of environmental disturbance torques due to the interaction of solar radiation pressure on vibrating and thermally deflected systems is discussed.

Bainum, Peter M.↗
NASA NTRS1988

Development of a two-dimensional skin friction balance nulling circuit using multivariable control theory

Measurement of planar skin friction forces in aerodynamic testing currently requires installation of two perpendicularly mounted, single-axis balances; consequently, force components must be sensed at two distinct locations. A two-axis instrument developed at the Langley Research Center to overcome this disadvantage allows measurement of a two-dimensional force at one location. This paper describes a feedback-controlled nulling circuit developed for the NASA two-axis balance which, without external compensation, is inherently unstable because of its low friction mechanical design. Linear multivariable control theory is applied to an experimentally validated mathematical model of the balance to synthesize a state-variable feedback control law. Pole placement techniques and computer simulation studies are employed to select eigenvalues which provide ideal transient response with decoupled sensing dynamics.

Tripp, John S.↗
NASA NTRS1989

Applications of a general thermal/hydraulic simulation tool

The analytic techniques, sample applications, and development status of a general-purpose computer program called SINDA '85/FLUINT (for systems improved numerical differencing analyzer, 1985 version with fluid integrator), designed for simulating thermal structures and internal fluid systems, are described, with special attention given to the applications of the fluid system capabilities. The underlying assumptions, methodologies, and modeling capabilities of the system are discussed. Sample applications include component-level and system-level simulations. A system-level analysis of a cryogenic storage system is presented.

Cullimore, B. A.↗
NASA NTRS1994

Development and initial test of the University of Wisconsin global isentropic-sigma model

The description of a global version of the University of Wisconsin (UW) hybrid isentropic-sigma (theta-sigma) model and the results from an initial numerical weather prediction experiment are presented in this paper. The main objectives of this initial test are to (1) discuss theta-sigma model development and computer requirements, (2) demonstrate the ability of the UW theta-sigma model for global numerical weather prediction using realistic orography and parameterized physical processes, and (3) compare the transport of an inert trace constituent against a nominally 'identical' sigma coordinate model. Initial and verifying data for the 5-day simulations presented in this work were supplied by the Goddard Earth Observing System (GEOS-1) data assimilation system. The time period studied is 1-6 February 1985. This validation experiment demonstrates that the global UW theta-sigma model produces a realistic 5-day simulation of the mass and momentum distributions when compared to both the identical sigma model and GEOS-1 verification. Root-mean-square errors demonstrate that the theta-sigma model is slightly more accurate than the nominally identical sigma model with respect to standard synoptic variables. Of particular importance, the UW theta-sigma model displays a distinct advantage over the conventional sigma model with respect to the prognostic simulation of inert trace constituent transport in amplifying baroclinic waves of the extratropics. This is especially true in the upper troposphere and stratosphere where the spatial integrity and conservation of an inert trace constituent is severely compromised in the sigma model compared to the theta-sigma model.

Zapotocny, Tom H.↗
NASA NTRS2006

Impact of the Columbia Supercomputer on NASA Space and Exploration Mission

NASA's 10,240-processor Columbia supercomputer gained worldwide recognition in 2004 for increasing the space agency's computing capability ten-fold, and enabling U.S. scientists and engineers to perform significant, breakthrough simulations. Columbia has amply demonstrated its capability to accelerate NASA's key missions, including space operations, exploration systems, science, and aeronautics. Columbia is part of an integrated high-end computing (HEC) environment comprised of massive storage and archive systems, high-speed networking, high-fidelity modeling and simulation tools, application performance optimization, and advanced data analysis and visualization. In this paper, we illustrate the impact Columbia is having on NASA's numerous space and exploration applications, such as the development of the Crew Exploration and Launch Vehicles (CEV/CLV), effects of long-duration human presence in space, and damage assessment and repair recommendations for remaining shuttle flights. We conclude by discussing HEC challenges that must be overcome to solve space-related science problems in the future.

Biswas, Rupak↗
NASA NTRS2008

Pre-Stall Behavior of a Transonic Axial Compressor Stage via Time-Accurate Numerical Simulation

CFD calculations using high-performance parallel computing were conducted to simulate the pre-stall flow of a transonic compressor stage, NASA compressor Stage 35. The simulations were run with a full-annulus grid that models the 3D, viscous, unsteady blade row interaction without the need for an artificial inlet distortion to induce stall. The simulation demonstrates the development of the rotating stall from the growth of instabilities. Pressure-rise performance and pressure traces are compared with published experimental data before the study of flow evolution prior to the rotating stall. Spatial FFT analysis of the flow indicates a rotating long-length disturbance of one rotor circumference, which is followed by a spike-type breakdown. The analysis also links the long-length wave disturbance with the initiation of the spike inception. The spike instabilities occur when the trajectory of the tip clearance flow becomes perpendicular to the axial direction. When approaching stall, the passage shock changes from a single oblique shock to a dual-shock, which distorts the perpendicular trajectory of the tip clearance vortex but shows no evidence of flow separation that may contribute to stall.

Chen, Jen-Ping↗
NASA NTRS2024

NASA HECC Geometry and Performance Review Part 2: Geometric Differences Between the As-Manufactured and Design-Intent Impeller Geometry and their Effects on the Vaneless Diffuser Configuration Performance

An investigation of the NASA High Efficiency Centrifugal Compressor (HECC) vaneless diffuser configuration was performed. This multipart investigation focused on validating the computational model against experimental data. The validated model was then used to explore the effects of observed geometric differences between the As-Manufactured and Design-Intent impellers. Lastly, the validated model was used for comparison against an experimental tip clearance study. Part II of the investigation of the NASA HECC vaneless diffuser configuration focused on understanding the differences in geometry and performance between the As-Manufactured impeller and the Design-Intent impeller. This was achieved through comparison of the As-Manufactured HECC vaneless computational model, developed from the solid model of the impeller and validated in Part I, against a new model developed from the Design-Intent blade sections published in NASA/CR-2014-218114/Rev1. The 1D performance values showed that the As-Manufactured impeller underperformed compared to the Design-Intent for all four speedlines that were simulated. Further investigation of profiles, loading and contours showed consistent underperformance of the As-Manufactured relative to the Design-Intent. An investigation into the source of the performance differences led to the discovery of several significant variations in the impeller geometries. The differences that were observed can be summarized into four categories: fillets, trailing-edge exit radii variation, dissimilarity in the splitter leading-edge geometry and main blade thickness differences. The investigation then shifted its effort to quantify the performance effects caused by geometric differences. The investigation showed that out of the four geometric differences that were explored, the differences in the splitter blade had the largest impact. These differences most notably changed flow physics near the splitter leading edge, especially near the tip of the impeller.

centrifugal compressor↗
NASA NTRS1985

A comparison between implicit and hybrid methods for the calculation of steady and unsteady inlet flows

Numerical simulation of steady and unsteady transonic diffuser flows using two different computer codes are discussed and compared with experimental data. The codes solve the Reynolds-averaged, compressible, Navier-Stokes equations using various turbulence models. One of the codes has been applied extensively to diffuser flows and uses the hybrid method of MacCormack. This code is relatively inefficient numerically. The second code, which was developed more recently, is fully implicit and is relatively efficient numerically. Simulations of steady flows using the implicit code are shown to be in good agreement with simulations using the hybrid code. Both simulations are in good agreement with experimental results. Simulations of unsteady flows using the two codes are in good qualitative agreement with each other, although the quantitative agreement is not as good as in the steady flow cases. The implicit code is shown to be eight times faster than the hybrid code for unsteady flow calculations and up to 32 times faster for steady flow calculations. Results of calculations using alternative turbulence models are also discussed.

Coakley, T. J.↗
NASA NTRSDate not supplied

Overview of Ablative TPS Modeling at NASA Ames

Over the past decade, NASA has invested in efforts to build predictive thermal protection system (TPS) material models from the micro-scale to the macro-scale. To complement the mission design cycle process and reduce the need for extensive testing, NASA is developing modeling and simulation tools that enable characterizing material properties and response to hot plasma experienced during atmospheric entry. Traditional material response and ablation modeling tools, such as the heritage code FIAT, and its multidimensional siblings, TITAN and 3dFIAT, are being complemented with newly developed software such as Icarus and PATO. Both of these programs are three-dimensional, finite-volume solvers that use unstructured meshes and 21st century programming paradigms to allow for efficient parallel simulations. FIAT and Icarus are also used for TPS sizing purposes. Today, these traditional tools are being supplemented with computational materials models at the atomistic level. The scales of interest range from computational chemistry (Density Functional Theory [DFT]), to atomistic simulations (Molecular Dynamics [MD]), to the microscale with the Porous Microstructure Analysis (PuMA) software that was recently awarded the 2022 NASA Software of the Year award. Finally, thermo-structural modeling is also of interest to the TPS Materials branch and done using commercial tools such as MSC MARC, MENTAT, NASTRAN and PATRAN. The present talk will also link the use of these computational tools to current NASA missions and projects associated with challenging and complex vehicles entries/reentries.

materials modeling↗
NASA NTRS1986

Computer-Aided Modeling and Analysis of Power Processing Systems (CAMAPPS), phase 1

The large-signal behaviors of a regulator depend largely on the type of power circuit topology and control. Thus, for maximum flexibility, it is best to develop models for each functional block a independent modules. A regulator can then be configured by collecting appropriate pre-defined modules for each functional block. In order to complete the component model generation for a comprehensive spacecraft power system, the following modules were developed: solar array switching unit and control; shunt regulators; and battery discharger. The capability of each module is demonstrated using a simplified Direct Energy Transfer (DET) system. Large-signal behaviors of solar array power systems were analyzed. Stability of the solar array system operating points with a nonlinear load is analyzed. The state-plane analysis illustrates trajectories of the system operating point under various conditions. Stability and transient responses of the system operating near the solar array's maximum power point are also analyzed. The solar array system mode of operation is described using the DET spacecraft power system. The DET system is simulated for various operating conditions. Transfer of the software program CAMAPPS (Computer Aided Modeling and Analysis of Power Processing Systems) to NASA/GSFC (Goddard Space Flight Center) was accomplished.

Kim, S.↗