Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamic linear model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Data-driven learning of Mori–Zwanzig operators for isotropic turbulence

Developing reduced-order models for turbulent flows, which contain dynamics over a wide range of scales, is an extremely challenging problem. In statistical mechanics, the Mori–Zwanzig (MZ) formalism provides a mathematically exact procedure for constructing reduced-order representations of high-dimensional dynamical systems, where the effects due to the unresolved dynamics are captured in the memory kernel and orthogonal dynamics. Turbulence models based on MZ formalism have been scarce due to the limited knowledge of the MZ operators, which originates from the difficulty in deriving MZ kernels for complex nonlinear dynamical systems. In this work, we apply a recently developed data-driven learning algorithm, which is based on Koopman's description of dynamical systems and Mori's linear projection operator, on a set of fully resolved isotropic turbulence datasets to extract the Mori–Zwanzig operators. With data augmentation using known turbulence symmetries, the extracted Markov term, memory kernel, and orthogonal dynamics are statistically converged and the generalized fluctuation–dissipation relation can be verified. The properties of the memory kernel and orthogonal dynamics, and their dependence on the choices of observables are investigated to address the modeling assumptions that are commonly used in MZ-based models. A series of numerical experiments are then constructed using the extracted kernels to evaluate the memory effects on prediction. The results show that the prediction errors are strongly affected by the choice of observables and can be further reduced by including the past history of the observables in the memory kernel.

97 MATHEMATICS AND COMPUTING↗

Dynamics of electrified liquid metal surface using shallow water model

A shallow water model that incorporates surface tension and electric field effects is developed to investigate the dynamics of an electrified liquid surface. The computational model is verified against the Zakharov–Kuznetsov equation and is applied to study the growth and damping of the electrified liquid surface. A linear wave analysis is performed under a shallow water theory assuming an analytic solution of the electric field, similar to the Tonks–Frenkel instability. The electrified liquid surface grows or dampens based on the balance of the electric field, surface tension, and gravitational forces. As a result, the numerical results obtained from the electrified shallow water solver are in good agreement with the theoretical analysis.

Computational models↗

Lagrangian or Eulerian; real or Fourier? Not all approaches to large-scale structure are created equal

We present a pedagogical systematic investigation of the accuracy of Eulerian and Lagrangian perturbation theories of large-scale structure. We show that significant differences exist between them especially when trying to model the Baryon Acoustic Oscillations (BAO). We find that the best available model of the BAO in real space is the Zel'dovich Approximation (ZA), giving an accuracy of ∼<3% at redshift of z = 0 in modelling the matter 2-pt function around the acoustic peak. All corrections to the ZA around the BAO scale are perfectly perturbative in real space. Any attempt to achieve better precision requires calibrating the theory to simulations because of the need to renormalize those corrections. In contrast, theories which do not fully preserve the ZA as their solution, receive O(1) corrections around the acoustic peak in real space at z = 0, and are thus of suspicious convergence at low redshift around the BAO. As an example, we find that a similar accuracy of 3% for the acoustic peak is achieved by Eulerian Standard Perturbation Theory (SPT) at linear order only at z ≈ 4. Thus even when SPT is perturbative, one needs to include loop corrections for z∼<4 in real space. In Fourier space, all models perform similarly, and are controlled by the overdensity amplitude, thus recovering standard results. However, that comes at a price. Real space cleanly separates the BAO signal from non-linear dynamics. In contrast, Fourier space mixes signal from short mildly non-linear scales with the linear signal from the BAO to the level that non-linear contributions from short scales dominate. Therefore, one has little hope in constructing a systematic theory for the BAO in Fourier space.

79 ASTRONOMY AND ASTROPHYSICS↗

Numerical modeling of a proton spin-flipping system in the spin transparency mode at an integer spin resonance in JINR's Nuclotron

In this paper we propose a lattice insertion for the Nuclotron ring called a “spin navigator” that can adjust any direction of the proton polarization in the orbital plane using weak solenoids. The polarization control is realized in the spin transparency mode at the energy of 108 MeV, which corresponds to the integer spin resonance γ G = 2. The requirements on the navigator solenoid fields are specified considering the criteria for stability of the spin motion during any manipulation of the polarization direction in an experiment. Additionally, this paper presents the results of numerical modeling of the proton spin dynamics in the Nuclotron ring operated in the spin transparency mode. The verified spin navigator is aimed at an experimental study of a spin-flipping system using the Nuclotron ring. The results are relevant to the NICA (JINR), EIC (BNL) and COSY (FZJ) facilities where the spin transparency mode can be applied for polarization control.

47 OTHER INSTRUMENTATION↗

Magnetic excitations in the bulk multiferroic two-dimensional triangular lattice antiferromagnet ( Lu , Sc ) FeO 3

Noncollinear two-dimensional triangular lattice antiferromagnets (2D TLAFs) are currently an area of very active research due to their unique magnetic properties, which lead to nontrivial quantum effects that experimentally manifest themselves in the spin excitation spectra. Recent examples of such insulating 2D TLAFs include (Y, Lu) MnO 3 , LiCrO 2 , and CuCrO 2 . Hexagonal LuFeO 3 is a recently synthesized 2D TLAF which exhibits properties of an ideal multiferroic material, partially because of the high spin (S = 5/2) and strong magnetic superexchange interactions. We report the full range of spin dynamics in a bulk single crystal of (Lu 0.6 Sc 0.4 )FeO 3 (Sc doping to stabilize the hexagonal structure) measured via time-of-flight inelastic neutron scattering. Modeling with linear spin-wave theory yields a nearest-neighbor exchange coupling of J = 4.0(2) meV (density functional theory calculations for h – LuFeO 3 predicted a value of 6.31 meV) and anisotropy values of K D = 0.17(1) meV (easy plane) and K A = – 0.05(1) meV (local easy axis). Furthermore, it is observed that the magnon bandwidth of the spin-wave spectra is twice as large for h – (Lu,Sc)FeO 3 as it is for h – LuMnO 3 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sparse Control Synthesis for Uncertain Responsive Loads With Stochastic Stability Guarantees

In this report, recent studies have demonstrated the potential of flexible loads in providing frequency response services, predominantly due to their availability and cost-effectiveness. However, uncertainty and variability in various weather-related and end-use behavioral factors often impact the reliability of demand-side control performance. This work addresses this problem with the design of a demand-side control to achieve frequency response under load uncertainties. Our approach involves modeling the load uncertainties via stochastic processes that appear as both multiplicative and additive in the power system dynamics. Recently developed mean square exponential stability (MSES) results for continuous-time linear stochastic systems are applied to pose the control synthesis problem which results in an LMI-based optimization problem. Additional costs and constraints are added to the LMI-based controller synthesis to ensure MSES, improve closed-loop transient performance, maximize tolerable uncertainties, and promote sparsity in the controller. Additionally, the fundamental limitations between the tolerable uncertainties and control efforts while ensuring MSES are discussed. Further, the control synthesis problem for the case of the full-state measurement is generalized to the case of partial-state measurements. The proposed control synthesis is illustrated on an IEEE 39 bus system with rigorous studies to demonstrate the role of sparsity, closed-loop transient performance, tolerable uncertainties, and control efforts while ensuring MSES and achieving frequency response.

42 ENGINEERING↗

Efficient Reformulation of Linear and Nonlinear Solid-Phase Diffusion in Lithium-ion Battery Models using Symmetric Polynomials: Mass Conservation and Computational Efficiency

Lithium-ion batteries are typically modeled using porous electrode theory coupled with various transport and reaction mechanisms, along with suitable discretization or approximations for the solid-phase diffusion equation. The solid-phase diffusion equation represents the main computational burden for typical pseudo-2-dimensional (p2D) models since these equations in the pseudo r -dimension must be solved at each point in the computational grid. This substantially increases the complexity of the model as well as the computational time. Traditional approaches towards simplifying solid-phase diffusion possess certain significant limitations, especially in modeling emerging electrode materials which involve phase changes and variable diffusivities. A computationally efficient representation for solid-phase diffusion is discussed in this paper based on symmetric polynomials using Orthogonal Collocation and Galerkin formulation (weak form). A systematic approach is provided to increase the accuracy of the approximation (p form in finite element methods) to enable efficient simulation with a minimal number of semi-discretized equations, ensuring mass conservation even for non-linear diffusion problems involving variable diffusivities. These methods are then demonstrated by incorporation into the full p2D model, illustrating their advantages in simulating high C-rates and short-time dynamic operation of Lithium-ion batteries.

25 ENERGY STORAGE↗

Embedded Sensors and Controls to Improve Component Performance and Reliability - System Dynamics Modeling and Control System Design

This report documents the current status of the modeling, control design, and embedded control research for the magnetic bearing canned rotor pump being used as a demonstration platform for deeply integrating instrumentation and controls (I&C) into nuclear power plant components. This pump is a highly inter-connected thermo/electro/mechanical system that requires an active control system to operate. Magnetic bearings are inherently unstable system and without active, moment by moment control, the rotor would contact fixed surfaces in the pump causing physical damage. This report details the modeling of the pump rotordynamics, fluid forces, electromagnetic properties of the protective cans, active magnetic bearings, power electronics, and interactions between different dynamical models. The system stability of the unforced and controlled rotor are investigated analytically. Additionally, controllers are designed using proportional derivative (PD) control, proportional integral derivative (PID) control, voltage control, and linear quadratic regulator (LQR) control. Finally, a design optimization problem that joins the electrical, mechanical, magnetic, and control system design into one problem to balance the opposing needs of various design criteria using the embedded system approach is presented.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Analytic evaluation of display requirements for approach to landing

A pilot-vehicle-display model is used to study information and display requirements and the effects on system performance and reliability of pilot-induced randomness, wind gusts, configurational changes, etc. A brief description of a control theoretic systems model is given and its use and validity are demonstrated by applying it in a piloted approach to landing situation. The analysis procedure assumes that the vehicle dynamics are represented by linearized equations of motion.

Kleinman, D. L.↗

Chaotic /strange/ and periodic behavior in instability saturation by the oscillating two-stream instability

The nonlinear Schroedinger equation with linear growth and damping is truncated to three waves. The resulting system of nonlinear ordinary differential equations describes the excitation of linearly damped waves by the oscillating two-stream instability driven by a linearly unstable pump wave. This system represents a simple model for the nonlinear saturation of a linearly unstable wave. The model is examined analytically and numerically as a function of the dimensionless parameters of the system. It is found that the model can exhibit a wealth of characteristic dynamical behavior including stationary equilibria, Hopf bifurcations to periodic orbits, period doubling bifurcations, chaotic solutions characteristic of a strange attractor, tangent bifurcations from chaotic to periodic solutions, transient chaos, and hysteresis. Many of these features are shown to be explainable on the basis of one-dimensional maps. In the case of chaotic solutions, evidence for the presence of a strange attractor is provided by demonstrating Cantor set-like structure (i.e., scale invariance) in the surface of section.

Russell, D. A.↗

Control of large antennas based on electromagnetic performance criteria

The electromagnetic (EM) performance of large flexible antennas is traditionally achieved by imposing stringent geometric restrictions on the structural distortions from a nominal optimum configuration. An approach to alleviate the stringency of the geometrical criteria of satisfactory performance is presented. The approach consists of generating a linear optimal control problem with quadratic cost functional where the cost functional is obtained from the EM characteristics of the antenna and the dynamic system constraint is given by the structural model of the antenna. It is established that the EM based optimal controller is considerably more efficient than the traditional geometrical based controllers. The same EM performance can be achieved with a much reduced control effort.

Lin, Y. H.↗

Flexible body dynamic stability for high performance aircraft

Dynamic equations which include the effects of unsteady aerodynamic forces and a flexible body structure were developed for a free flying high performance fighter aircraft. The linear and angular deformations are assumed to be small in the body reference frame, allowing the equations to be linearized in the deformation variables. Equations for total body dynamics and flexible body dynamics are formulated using the hybrid coordinate method and integrated in a state space format. A detailed finite element model of a generic high performance fighter aircraft is used to generate the mass and stiffness matrices. Unsteady aerodynamics are represented by a rational function approximation of the doublet lattice matrices. The equations simplify for the case of constant angular rate of the body reference frame, allowing the effect of roll rate to be studied by computing the eigenvalues of the system. It is found that the rigid body modes of the aircraft are greatly affected by introducing a constant roll rate, while the effect on the flexible modes is minimal for this configuration.

Goforth, E. A.↗

Optimal fixed-finite-dimensional compensator for Burgers' equation with unbounded input/output operators

The problem of using reduced order dynamic compensators to control a class of nonlinear parabolic distributed parameter systems was considered. Concentration was on a system with unbounded input and output operators governed by Burgers' equation. A linearized model was used to compute low-order-finite-dimensional control laws by minimizing certain energy functionals. Then these laws were applied to the nonlinear model. Standard approaches to this problem employ model/controller reduction techniques in conjunction with linear quadratic Gaussian (LQG) theory. The approach used is based on the finite dimensional Bernstein/Hyland optimal projection theory which yields a fixed-finite-order controller.

Burns, John A.↗

Design and architecture of the Mars relay network planning and analysis framework

In this paper we describe the design and architecture of the Mars Network planning and analysis framework that supports generation and validation of efficient planning and scheduling strategy. The goals are to minimize the transmitting time, minimize the delaying time, and/or maximize the network throughputs. The proposed framework would require (1) a client-server architecture to support interactive, batch, WEB, and distributed analysis and planning applications for the relay network analysis scheme, (2) a high-fidelity modeling and simulation environment that expresses link capabilities between spacecraft to spacecraft and spacecraft to Earth stations as time-varying resources, and spacecraft activities, link priority, Solar System dynamic events, the laws of orbital mechanics, and other limiting factors as spacecraft power and thermal constraints, (3) an optimization methodology that casts the resource and constraint models into a standard linear and nonlinear constrained optimization problem that lends itself to commercial off-the-shelf (COTS)planning and scheduling algorithms.

Mars relay network planning analysis↗

Robust Trajectory Optimization for NRHO Rendezvous Using SPICE Kernel Relative Motion

In this paper, robust optimization is performed on trajectory correction maneuvers during the lunar lander return phase of an Artemis mission, treating the trajectory from one hour after low lunar orbit departure to arrival in the vicinity of the lunar Gateway as a relative motion problem. To enable rapid stochastic optimization techniques requiring many candidate trajectories, SPICE kernel relative motion as implemented by the Quadratic Interpolated State Transition (QIST) system is used as the underlying dynamics propagation. The optimization is performed with a genetic optimizer using linear covariance (LinCov) software in a simplified operational context, taking into account the availability of navigation sensors with varying measurement models, ranges, and accuracies. No numerical integration is used, since the relative motion around Gateway is fully characterized with the a priori computation of the QIST coefficients. Maneuver placements are computed to optimize the minimum 3σ delta-v of the trajectory, the position dispersion at a target point, and a convex combination of these two metrics. An order of magnitude runtime improvement is provided over legacy methods with less than 10% error introduced. All QIST results are shown to be in-family with legacy methods. The tradespace for optimal delta-v design is found to range from 77.0 to 93.9 m/s, while the range of optimal dispersion is between 1.4 and 11.7 km.

Relative Motion↗

LINAC BEAM DYNAMICS SIMULATIONS WITH PY-ORBIT

Linac dynamics simulation capabilities of the PyORBIT code are discussed. PyORBIT is an open source code and a further development of the original ORBIT code that was created and used for design, studies, and commissioning of the SNS ring. The PyORBIT code, like the original one, has a two-layer structure. C++ is used to perform time-consuming computations, and the program flow is controlled from a Python language shell. The flexible structure makes it possible to use PyORBIT also for linac dynamics simulations. A benchmark of PyORBIT with Parmila and the XAL Online model is presented.

43 PARTICLE ACCELERATORS↗

Validation of Simulated Wave Energy Converter Responses to Focused Waves for CCP-WSI Blind Test Series 2: Preprint

Increasingly, focused waves are used as a design method to predict extreme loads for offshore structures, such as wave energy converters (WECs). However, the ability of computational methods to accurately simulate the prescribed focused waves and resulting wave structure interactions are not well-validated. As a participant in the Collaborative Computational Project in Wave Structure Interaction Blind Test Series 2, this study uses two computational fluid dynamics methods, WEC-Sim and STAR-CCM+, to evaluate three focused waves on two WEC-like bodies. WEC-Sim is a computationally efficient, midfidelity model based on linearized potential flow theory. STAR-CCM+ is a high-fidelity, three-dimensional, unsteady, Reynolds-averaged Navier-Stokes-based model. The two geometries considered are a hemispherical buoy and a cylindrical moon pool. The experimentally measured focused waves are reproduced in both codes, and the simulated displacements and mooring loads are obtained for each of the hydrodynamic bodies. The resulting STAR-CCM+ generated focused waves have approximately the same accuracy, in comparison to the analytic solution, as the experimentally generated focused waves. And, the WEC-Sim and STAR-CCM+ simulated displacements and mooring loads are, on average, within 5% of each other.

16 TIDAL AND WAVE POWER↗

Robustness Analysis of Integrated LPV-FDI Filters and LTI-FTC System for a Transport Aircraft

This paper proposes an analysis framework for robustness analysis of a nonlinear dynamics system that can be represented by a polynomial linear parameter varying (PLPV) system with constant bounded uncertainty. The proposed analysis framework contains three key tools: 1) a function substitution method which can convert a nonlinear system in polynomial form into a PLPV system, 2) a matrix-based linear fractional transformation (LFT) modeling approach, which can convert a PLPV system into an LFT system with the delta block that includes key uncertainty and scheduling parameters, 3) micro-analysis, which is a well known robust analysis tool for linear systems. The proposed analysis framework is applied to evaluating the performance of the LPV-fault detection and isolation (FDI) filters of the closed-loop system of a transport aircraft in the presence of unmodeled actuator dynamics and sensor gain uncertainty. The robustness analysis results are compared with nonlinear time simulations.

Khong, Thuan H.↗