Search NASA⌕ Search

SEARCH · Search NASA

Results for “intercomparison”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Comparison of ozone data derived from SBUV and SAGE with emphasis on longitudinal variations

Stratospheric ozone observations performed by the SBAV and SAGE satellite instruments in March and April 1979 are analyzed and compared to other data, where available; in the absence of ground-truth data the experimental uncertainties are modeled by intercomparison of the measurements. The signal-to-noise ratios for the detectability of longitudinal variation in ozone are estimated for both SBUV and SAGE instruments. The analysis of longitudinal variation data reveals significant differences in amplitudes obtained in individual events in which rapid amplitude changes with height were present. Finally, a systematic overestimation of ozone by 20 percent by the SAGE instrument and underestimation by SBUV by about 15 percent at 50-70 latitudes at 10 mb is noted.

Cunnold, D.↗

A review of satellite altimeter measurement of sea surface wind speed - With a proposed new algorithm

The scheduled February 1985 launch of a radar altimeter aboard the U.S. Navy satellite Geosat has motivated an in-depth investigation of wind speed retrieval from satellite altimeters. The accuracy of sea surface wind speed estimated by the Seasat altimeter is examined by comparison with wind speed estimated by the Seasat scatterometer. The intercomparison is based on globally distributed spatial and temporal averages of the estimated wind speed. It is shown that there are systematic differences between altimeter and scatterometer wind speed estimates. These differences are traced to errors in the Seasat altimeter geophysical data record wind speed algorithm. A new algorithm is proposed which yields consistent estimates from the two satellite sensors. Using this new algorithm, the rms difference between spatial and temporal averages of the two wind speed estimates is less than 1 m/s, and their correlation is greater than 0.9.

Chelton, D. B.↗

Airborne Lidar measurements of aerosols, mixed layer heights, and ozone during the 1980 PEPE/NEROS summer field experiment

A detailed summary of the NASA Ultraviolet Differential Absorption Lidar (UV DIAL) data archive obtained during the EPA Persistent Elevated Pollution Episode/Northeast Regional Oxidant Study (PEPE/NEROS) Summer Field Experiment Program (July through August 1980) is presented. The UV dial data set consists of remote measurements of mixed layer heights, aerosol backscatter cross sections, and sequential ozone profiles taken during 14 long-range flights onboard the NASA Wallops Flight Center Electra aircraft. These data are presented in graphic and tabular form, and they have been submitted to the PEPE/NEROS data archive on digital magnetic tape. The derivation of mixing heights and ozone profiles from UV Dial signals is discussed, and detailed intercomparisons with measurements obtained by in situ sensors are presented.

Browell, E. V.↗

Retrieval of sea-surface temperatures from HIRS2/MSU

The methods used at the Goddard Laboratory for Atmospheres to retrieve sea surface temperatures from HIRS2/MSU data for the four months of the NASA sea surface temperature intercomparison workshop are described. Results are shown comparing anomaly fields produced using data from ships, AVHRR, HIRS2/MSU, SMMR AND VAS for the last three of these months. Fields from AVHRR and HIRS2 show the highest accuracy compared to ship fields. Errors in the HIRS2 fields appear more random while AVHRR data shows large area, spatially coherent errors. The random errors in the HIRS2 fields can be further reduced by performing the retrievals at a higher spatial resolution.

Susskind, J.↗

Sea surface temperatures from VAS MSI data

The results of the SST intercomparison workshop series are the first examination of monthly mean SSTs derived from MSI data provided by the VAS instrument on the GOES series satellites. The most significant change in deriving the SST's was the use of the three window channel algorithm in the processing of the July data as opposed to the use of only the two window channel algorithm for the March data. In addition, further satellite/buoy matches indicated that the triple window channel algorithm showed a smaller standard deviation than the two window channel algorithm and was less sensitive to the effects of volcanic aerosol contamination and low level inversion conditions. This is due to the smaller brightness temperature attenuation by aerosols and water vapor at 3.9 microns than at 11.0 and 12.6 microns. Thus, the decision was made to use the best product (i.e., the three window channel aglorithm) for processing the July data.

Bates, J. J.↗

Analysis of airborne Doppler lidar, Doppler radar and tall tower measurements of atmospheric flows in quiescent and stormy weather

The first experiment to combine airborne Doppler Lidar and ground-based dual Doppler Radar measurements of wind to detail the lower tropospheric flows in quiescent and stormy weather was conducted in central Oklahoma during four days in June-July 1981. Data from these unique remote sensing instruments, coupled with data from conventional in-situ facilities, i.e., 500-m meteorological tower, rawinsonde, and surface based sensors, were analyzed to enhance understanding of wind, waves and turbulence. The purposes of the study were to: (1) compare winds mapped by ground-based dual Doppler radars, airborne Doppler lidar, and anemometers on a tower; (2) compare measured atmospheric boundary layer flow with flows predicted by theoretical models; (3) investigate the kinematic structure of air mass boundaries that precede the development of severe storms; and (4) study the kinematic structure of thunderstorm phenomena (downdrafts, gust fronts, etc.) that produce wind shear and turbulence hazardous to aircraft operations. The report consists of three parts: Part 1, Intercomparison of Wind Data from Airborne Lidar, Ground-Based Radars and Instrumented 444 m Tower; Part 2, The Structure of the Convective Atmospheric Boundary Layer as Revealed by Lidar and Doppler Radars; and Part 3, Doppler Lidar Observations in Thunderstorm Environments.

Bluestein, H. B.↗

The response of numerical weather prediction analysis systems to FGGE 2b data

An intercomparison of analyses of the main PGGE Level IIb data set is presented with three advanced analysis systems. The aims of the work are to estimate the extent and magnitude of the differences between the analyses, to identify the reasons for the differences, and finally to estimate the significance of the differences. Extratropical analyses only are considered. Objective evaluations of analysis quality, such as fit to observations, statistics of analysis differences, and mean fields are discussed. In addition, substantial emphasis is placed on subjective evaluation of a series of case studies that were selected to illustrate the importance of different aspects of the analysis procedures, such as quality control, data selection, resolution, dynamical balance, and the role of the assimilating forecast model. In some cases, the forecast models are used as selective amplifiers of analysis differences to assist in deciding which analysis was more nearly correct in the treatment of particular data.

Hollingsworth, A.↗

Retrieval of sea surface temperatures from HIRS2/MSU

The methods used at the Goddard Laboratory for Atmospheres (GLA) to retrieve sea surface temperatures from HIRS2/MSU data for the last 2 months of the NASA sea surface temperature intercomparison workshop are described. Results are shown that compare anomaly fields produced by using data from ships, AVHRR, and HIRS2/MSU for these months. Monthly mean fields derived from AVHRR and HIRS2 data show roughly comparable statistical accuracy compared to ship fields. Errors in the HIRS2 fields appear more random, while AVHRR data have larger regionally dependent biases and show large area spatially coherent errors. The random errors in the HIRS2 fields should be further reduced by performing the retrievals at a higher spatial resolution.

Susskind, J.↗

Large-scale sea surface temperature variability from satellite and shipboard measurements

A series of satellite sea surface temperature intercomparison workshops were conducted under NASA sponsorship at the Jet Propulsion Laboratory. Three different satellite data sets were compared with each other, with routinely collected ship data, and with climatology, for the months of November 1979, December 1981, March 1982, and July 1982. The satellite and ship data were differenced against an accepted climatology to produce anomalies, which in turn were spatially and temporally averaged into two-degree latitude-longitude, one-month bins. Monthly statistics on the satellite and ship bin average temperatures yielded rms differences ranging from 0.58 to 1.37 C, and mean differences ranging from -0.48 to 0.72 C, varying substantially from month to month, and sensor to sensor.

Bernstein, R. L.↗

Goddard Laboratory for Atmospheric Sciences physical retrieval system for remote determination of weather and climate parameter from HIRS2 and MSU observations

At the Goddard Laboratory for Atmospheric Sciences (GLAS) a physically based satellite temperature sounding retrieval system, involving the simultaneous analysis of HIRS2 and MSU sounding data, was developed for determining atmospheric and surface conditions which are consistent with the observed radiances. In addition to determining accurate atmospheric temperature profiles even in the presence of cloud contamination, the system provides global estimates of day and night sea or land surface temperatures, snow and ice cover, and parameters related to cloud cover. Details of the system are described elsewhere. A brief overview of the system is presented, as well as recent improvements and previously unpublished results, relating to the sea-surface intercomparison workshop, the diurnal variation of ground temperatures, and forecast impact tests.

Susskind, J.↗

An airborne lidar instrument for detection of OH using the technique of laser-induced fluorescence

Under suitable laboratory conditions, it has been demonstrated that the laser-induced fluorescence (LIF) measurement technique is sensitive enough to detect single atoms and molecules. This potential sensitivity has provided motivation for the development of this technique for ambient OH measurements. The present paper is concerned with an airborne lidar instrument for measuring OH concentration as used for the NASA GTE/CITE (Global Tropospheric Experiment/Chemical Instrumentation Test and Evaluation) intercomparison experiments during the fall of 1983 and the spring of 1984. A description is given of a working airborne instrument for measurements of OH in ambient air. The detection sensitivity demonstrated in the experiments should be sufficient for routine measurements in areas in which the OH concentration is in the range of high 1,000,000 molecule per cu cm or higher.

Davis, L. I., Jr.↗

Ground-based nitric oxide measurements at Wallops Island, Virginia

In July of 1983, ambient measurements of nitric oxide (NO) were obtained at Wallops Island, VA, during the NASA GTE/CITE ground-based instrument intercomparison field study. The instrument, which was designed for measurements in the remote troposphere from an aircraft platform, is briefly described. Ten days of ambient air observations showed broadly uniform diurnal behavior, although considerable variability was encountered. Two distinct synoptic meteorological conditions resulted in markedly different levels of nitric oxide abundance. When the local winds were from the north to west sectors, which placed the sampling site within 130 to 300 km of large urban centers, the midday mixing ratios were typically in the range of 200-300 pptv. In contrast, when the air mass sustained a 1- or 2-day period over the Atlantic Ocean, the mixing ratios were substantially lower and in the 50-60 pptv range.

Carroll, M. A.↗

Nitric oxide measurements at a nonurban eastern United States site - Wallops instrument results from July 1983 GTE/CITE mission

The NASA Goddard Space Flight Center/Wallops Flight Facility nitric oxide detector used in the July 1983 GTE/CITE 1 instrument intercomparison is a chemiluminescence system which, at that time, had a detection limit of about 2 pptv (S/N = 1) for 60-s integrations. A substantial amount of NO concentration data was taken with this system at Wallops Island, VA, a site that should be typical of numerous nonurban coastal areas of the eastern United States and for which little other data are available. Midday concentrations under conditions of northwest winds averaged about 200 pptv, a value low enough to imply lower NO(x) amounts than are generally thought to exist in the eastern United States. During a 2-day period when the sampled air had spent 1-2 days over the Atlantic Ocean, average NO concentrations of 70 and 33 ptv were observed. Measurements at night indicated an average NO concentration of 16 pptv under wind conditions making contamination of the sampled air by local anthropogenic sources unlikely.

Torres, A. L.↗

Precise GPS orbit determination results from 1985 field tests

Data from three different receiver types have been used to obtain precise orbits for the satellites of the Global Positioning System (GPS). The data were collected during the 1985 March-April GPS experiment to test and validate GPS techniques for precision orbit determination and geodesy. A new software package developed at the Jet Propulsion Laboratory (JPL), GIPSY (GPS Inferred Positioning SYstem), was used to process the data. To assess orbit accuracy, solutions are compared using integrated doppler data from various different receiver types, different fiducial sites, and independent data arcs, including one spanning six days. From these intercomparisons, orbit accuracy for a well-tracked GPS satellite of three meters in altitude and about five meters in each of down and cross-track components are inferred.

Lichten, S. M.↗

Vertical structure of Arctic haze observed by lidar

In the study of the Arctic Haze phenomenon, understanding the vertical structure of the haze aerosol is crucial in defining mechanisms of haze transport. Questions have also arisen concerning the representativeness of surface observations of Arctic Haze. Due to the strongly stratified nature of the Arctic troposphere, the mechanisms which transport aerosol to the surface from the transport altitudes of the lower troposphere are not obvious. In order to examine these questions, a Mie scattering lidar was installed at Alert, NWT, Canada. Lidar observes atmospheric aerosols and hydrymeteors as they appear in nature, unmodified by sampling effects. As such the results obtained are more realistic of the light scattering characteristics of the in situ aerosol than are those obtained by integrating nephelometers, for example, which heat the aerosol and dry it before measurement. With this lidar, a pulse was transmitted vetically through an evacuated tube in the roof of a building at Alert. The receiver consisted of a 20cm diameter Fresnel telescope, neutral density and polarizing filters, and RCA C31000A PMT, Analog Modules LA-90-P logarithmic amplifier and a Lecroy TR8827 32 MHz digitizer. The lidar equation was solved for the backscattering coefficient of the aerosol assuming no two way transmission losses in the signal. The lidar results have shown that intercomparison between lidar obtained visibilities and observer visibilities are in much better agreement than for other optical or aerosol monitors. Three new effects were identified in the lidar profiles which contribute to the vertical transport of haze. These effects are briefly discussed.

Hoff, R. M.↗

Preliminary estimates of radiosonde thermistor errors

It has been long realized that radiosonde temperature measurements are subject to errors, not the least of which is the effect of long- and short-wave radiation. Methods of adjusting the daytime temperatures to a nighttime equivalent temperature were developed a number of years ago, and are used by some analysis centers. Other than providing consistent observations for analysis this procedure does not provide a true correction. The literature discusses the problem of radiosonde temperature errors but it is not apparent what effort, if any, has been taken to quantify these errors. In order to quantify this radiation error, radiosondes containing multiple thermistors with different coatings were flown at Goddard Space Flight Center/Wallops Flight Facility. The coatings employed had different spectral characteristics and, therefore, different absorption and emissivity properties. Discrimination of the recorded temperatures enabled day and night correction values to be determined for the US standard white-coated rod thermistor. The correction magnitudes are given and a comparison of US measured temperatures before and after correction are compared with temperatures measured with the Vaisala radiosonde. The US and Vaisala radiosonde data are from the recently completed WMO International Radiosonde Intercomparison held at Wallops. The corrections are in the proper direction, day and night, and reduce day-night temperature differences to less than 0,5°C between surface and 30 hPa. The present uncorrected temperatures used with the Viz radiosonde have day-night differences that exceed 1°C at levels below 90 hPa. Additional measurements are planned to confirm these preliminary results and determine the solar elevation angle effect on the corrections. The technique used to obtain the corrections may also be used to recover a true 'absolute' value and might be considered a valuable contribution to the meteorological community for use as a reference instrument.

Temperature measurement↗