Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Single-Crystallization of O3-Type Layered Oxide Cathode for Na-Ion Battery

The development of high-energy-density Na-ion batteries places significant demands on single-crystal layered oxide cathodes, especially for further high-voltage, solid-state battery scenarios. In the O3-type structure, due to the original sluggish Na ion diffusion kinetics (approximately 1 order of magnitude lower than that of Li-ion), and further hindrance against diffusion kinetics caused by single-crystal architecture, these inherent defects lead to the decline in the electrochemical performance. Herein, we demonstrated that the single crystallization of O3-type NaNi 1/3 Fe 1/3 Mn 1/3 O 2 cathode (d 50 = 5.04 μm) aggravates surface-to-bulk phase inhomogeneity distribution, which is attributed to the uneven Na ions extraction. Moreover, the Na-depletion of the surface/shell region not only aggravates Na ion diffusion resistance but also leads to a higher valence state of transition-metal elements (e.g., Ni/Fe) near the surface of the single-crystal particle, which further compromises the cathode-electrolyte interface stability. Furthermore, not limited to revealing the challenges, tuning the particle size and moderating quasi-single-crystal strategies have been proven to effectively mitigate the negative uneven distributions of Na ions, phases, and valence/oxidative states, resulting in efficient modification for single crystallization of Na-layered oxide cathodes.

36 MATERIALS SCIENCE↗

(Photo)Electrocatalytic CO 2 Reduction at the Defective Anatase TiO 2 (101) Surface

Excessive carbon dioxide (CO 2 ) emissions by combustion of fossil fuels are linked to global warming and rapid climate change. One promising route to lowering the concentration of CO 2 in the atmosphere is to reduce it to useful small molecules via photoelectrocatalytic hydrogenation, which would enable solar energy storage with a zero-carbon emission cycle and perform a more efficient separation of the photogenerated electron and hole pair than pure photocatalysis. Indeed, photoelectrocatalytic CO 2 reduction has been an intense focus of research. Using the density functional theory (DFT), we studied the CO 2 reduction reaction on the defective anatase TiO 2 (101) surface, at both the solvent/catalyst and the electrolyte/catalyst interfaces. The analysis of the electronic structure of the surface shows a contrast between the solvent/catalyst and the electrolyte/catalyst interfaces, which results in the two corresponding catalytic cycles being distinct. Furthermore, our study explains at the electronic and mechanistic levels why methanol is the main product in the presence of the electrolyte and why the overpotential is not only controlled by the reaction process but also by the diffusion process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insights into the structure and dynamics of K + ions at the muscovite–water interface from machine learning potential simulations

The surfaces of many minerals are covered by naturally occurring cations that become partially hydrated and can be replaced by hydronium or other cations when the surface is exposed to water or an aqueous solution. These ion exchange processes are relevant to various chemical and transport phenomena, yet elucidating their microscopic details is challenging for both experiments and simulations. Here, in this work, we make a first step in this direction by investigating the behavior of the native K + ions at the interface between neat water and the muscovite mica (001) surface with ab-initio -based machine learning molecular dynamics and enhanced sampling simulations. Our results show that the desorption of the surface K + ions in pure ion-free water has a significant free energy barrier irrespective of their local surface arrangement. In contrast, facile K + diffusion between mica’s ditrigonal cavities characterized by different Al/Si orderings is observed. This behavior suggests that the K + ions may favor a dynamic disordered surface arrangement rather than complete desorption when exposed to deionized water.

Ab-initio molecular dynamics↗

Direct Molecular Evidence of Proton Transfer and Mass Dynamics at the Electrode–Electrolyte Interface

Proton transfer has been widely regarded as a key step in many electrochemical and biological processes. However, direct molecular evidence has long been lacking. In this work, we chose the electrochemical oxidation of acetaminophen (APAP) as a model system and utilized in situ liquid time-of-flight secondary ion mass spectroscopy (ToF-SIMS) to molecularly examine proton solvation and transfer in this process. In addition, we successfully captured and identified the transient radical intermediate, providing solid molecular evidence to resolve an important debate in electron transfer-proton transfer oxidation mechanism of APAP. Moreover, the potential-dependent behaviors of both inert ions and electroactive species during the dynamic potential scanning were chemically monitored in real time and the mass diffusion mechanism regarding the electroactive and non-electroactive species was revealed under polarized conditions. The results are well consistent with our computer simulation. The observations in this work greatly improved the comprehensive understanding of proton transfer and mass dynamics occurring at the electrode-electrolyte interface involved in complex electrochemical processes.

Wang, Jun-Gang↗

Dynamics at a Peptide–TiO 2 Anatase (101) Interface

The interface between biological matter and inorganic materials is a widely investigated research topic due to possible applications in biomedicine and nanotechnology. In this context, the molecular level adsorption mechanism that drives specific recognition between small peptide sequences and inorganic surfaces represents an important topic likely to provide much information useful for designing bioderived materials. In this paper, we investigate the dynamics at the interface between a Ti-binding peptide sequence (AMRKLPDAPGMHC) and a TiO 2 anatase surface by using molecular dynamics (MD) simulations. In the simulations the adsorption mechanism is characterized by diffusion of the peptide from the bulk water phase toward the TiO 2 surface, followed by the anchoring of the peptide to the surface. The anchoring is mediated by the interfacial water layers by means of the charged groups of the side chains of the peptide. Finally, the peptide samples anchored and dissociated states from the surface and its conformation is not affected by the surface when anchored.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Conversion Reaction Mechanisms in Lithium Ion Batteries: Study of the Binary Metal Fluoride Electrodes

Materials that undergo a conversion reaction with lithium (e.g., metal fluorides MF{sub 2}: M = Fe, Cu, ...) often accommodate more than one Li atom per transition-metal cation, and are promising candidates for high-capacity cathodes for lithium ion batteries. However, little is known about the mechanisms involved in the conversion process, the origins of the large polarization during electrochemical cycling, and why some materials are reversible (e.g., FeF{sub 2}) while others are not (e.g., CuF{sub 2}). In this study, we investigated the conversion reaction of binary metal fluorides, FeF{sub 2} and CuF{sub 2}, using a series of local and bulk probes to better understand the mechanisms underlying their contrasting electrochemical behavior. X-ray pair-distribution-function and magnetization measurements were used to determine changes in short-range ordering, particle size and microstructure, while high-resolution transmission electron microscopy (TEM) and electron energy-loss spectroscopy (EELS) were used to measure the atomic-level structure of individual particles and map the phase distribution in the initial and fully lithiated electrodes. Both FeF{sub 2} and CuF{sub 2} react with lithium via a direct conversion process with no intercalation step, but there are differences in the conversion process and final phase distribution. During the reaction of Li{sup +} with FeF{sub 2}, small metallic iron nanoparticles (<5 nm in diameter) nucleate in close proximity to the converted LiF phase, as a result of the low diffusivity of iron. The iron nanoparticles are interconnected and form a bicontinuous network, which provides a pathway for local electron transport through the insulating LiF phase. In addition, the massive interface formed between nanoscale solid phases provides a pathway for ionic transport during the conversion process. These results offer the first experimental evidence explaining the origins of the high lithium reversibility in FeF{sub 2}. In contrast to FeF{sub 2}, no continuous Cu network was observed in the lithiated CuF{sub 2}; rather, the converted Cu segregates to large particles (5-12 nm in diameter) during the first discharge, which may be partially responsible for the lack of reversibility in the CuF{sub 2} electrode.

Wang, Feng↗

Scaling Laws of Exciton Recombination Kinetics in Low Dimensional Halide Perovskite Nanostructures

Carrier recombination is a crucial process governing the optical properties of a semiconductor. Although various theoretical approaches have been utilized to describe carrier behaviors, a quantitative understanding of the impact of defects and interfaces in low dimensional semiconductor systems is still elusive. Here, we develop a model system consisting of chemically tunable, highly luminescent halide perovskite nanocrystals to illustrate the role of carrier diffusion and material dimensionality on the carrier recombination kinetics and luminescence efficiency. Our advanced synthetic methods provide a well-controlled colloidal system consisting of nanocrystals with different aspect ratios, halide compositions, and surface conditions. Using this system, we reveal the scaling laws of photoluminescence quantum yield and radiative lifetime with respect to the aspect ratio of nanocrystals. The scaling laws derived herein are not only a phenomenological observation but proved a powerful tool disentangling the carrier dynamics of microscopic systems in a quantitative and interpretable manner. The investigation of our model system and theoretical formulation bring to light the dimensionality, as a hidden constraint on carrier dynamics, and identify the diffusion length as an important parameter that distinguishes nanoscale and macroscale carrier behaviors. Furthermore, the conceptual distinction in carrier dynamics in different dimensionality regimes informs new design rules for optical devices where complex microstructures are involved.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Small-Angle Twist Grain Boundaries as Sinks for Point Defects

It is known that grain boundaries (GBs) provide sinks for defects induced into a solid by irradiation. At the same time radiation can change the atomic structure and chemistry of GBs, which in turn impacts the ability of GBs to continue absorbing defects. Although a number of studies have been reported for tilt GBs acting as defect sinks, the questions of how twist GBs evolve to absorb non-equilibrium concentrations of defects and whether GBs saturate as defect sinks for typical irradiation conditions have remained largely unanswered. Here, we used a combination of molecular dynamics and grand canonical Monte Carlo simulations to determine how twist GBs accommodate point defects. We used SiC and {001} and {111} twist GBs as model systems. We found that diffusion of defects along GBs in this material is slow and for most experimentally relevant conditions point defects will accumulate at twist GBs, driving structural and chemical evolution of these interfaces. During irradiation, screw dislocations within GB planes absorb interstitials by developing mixed dislocation segments that climb. Formation of mixed dislocations occurs either by nucleation of interstitial loops or by faulting/unfaulting of stacking faults. Furthermore both types of twist GBs can accommodate a high density of interstitials without losing the crystalline structure, irrespectively of the interstitial flux.

36 MATERIALS SCIENCE↗

Chemical interaction of B{sub 4}C, B, and C with Mo/Si layered structures

To enhance the thermal stability, B{sub 4}C diffusion barrier layers are often added to Mo/Si multilayer structures for extreme ultraviolet optics. Knowledge about the chemical interaction between B{sub 4}C and Mo or Si, however is largely lacking. Therefore, the chemical processes during annealing up to 600 deg. C of a Mo/B{sub 4}C/Si layered structure have been investigated in situ with hard x-ray photoelectron spectroscopy and ex situ with depth profiling x-ray photoelectron spectroscopy. Mo/B/Si and Mo/C/Si structures have also been analyzed as reference systems. The chemical processes in these systems have been identified, with two stages being distinguished. In the first stage, B and C diffuse and react predominantly with Mo. MoSi{sub x} forms in the second stage. If the diffusion barrier consists of C or B{sub 4}C, a compound forms that is stable up to the maximum probed temperature and annealing time. We suggest that the diffusion barrier function of B{sub 4}C interlayers as reported in literature can be caused by the stability of the formed compound, rather than by the stability of B{sub 4}C itself.

36 MATERIALS SCIENCE↗

InGaAs heterostructure formation in catalyst-free GaAs nanopillars by selective-area metal-organic vapor phase epitaxy

We investigate axial GaAs/InGaAs/GaAs heterostructures embedded in GaAs nanopillars via catalyst-free selective-area metal-organic chemical vapor deposition. Structural characterization by transmission electron microscopy with energy dispersive x-ray spectroscopy (EDS) indicates formation of axial In{sub x}Ga{sub 1-x}As (x{approx}0.20) inserts with thicknesses from 36 to 220 nm with {+-}10% variation and graded Ga:In transitions controlled by In segregation. Using the heterointerfaces as markers, the vertical growth rate is determined to increase linearly during growth. Photoluminescence from 77 to 290 K and EDS suggest the presence of strain in the shortest inserts. This capability to control the formation of axial nanopillar heterostructures is crucial for optimized device integration.

36 MATERIALS SCIENCE↗

Optical Properties Change in Te/As{sub 2}S{sub 3} Bilayer Thin Films

Bilayer thin films of Te/As{sub 2}S{sub 3} were prepared from Te and As{sub 2}S{sub 3} by thermal evaporation technique under high vacuum. We have irradiated the as-deposited films by laser light for photo diffusion study. We have compared the optical changes due to irradiation with As{sub 2}S{sub 3} film. The changes were characterized by FTIR and XPS techniques.

36 MATERIALS SCIENCE↗

FAR-ULTRAVIOLET SPECTRAL IMAGES OF THE ORION-ERIDANUS SUPERBUBBLE REGION

The far-ultraviolet (FUV) continuum and spectral images of C IV and H{sub 2} emission lines for the region of the Orion-Eridanus Superbubble are hereby presented and compared with maps obtained in other wavelengths. While the region shows complex structures, consisting of hot gases and cold dust, a close examination reveals that the FUV emission in this region can be understood reasonably as the result of their interactions. We confirm the origin of most diffuse FUV continuum to be starlight scattered by dust, but we also find that ionized gas contributes 50%-70% of the total FUV intensity in the regions of H{alpha} arcs. We note the bright diffuse FUV continuum in the eastern part of the northern region, which has a lot of dust, and attribute it to a greater abundance of bright, early-type stars in this region than in the west, as the amount of dust itself does not seem to be much different across 'arc A', which separates the two regions. In addition, two P Cygni-type stars are identified in this eastern region and their peculiar spectral profiles around the C IV emission line are manifested in the scattered diffuse spectrum. Besides this, the C IV emission is generally enhanced at the boundaries of the hot X-ray cavities where thin dust regions are located, confirming the thermal interface nature of the origin of this cooling emission line. The morphology of the H{sub 2} emission shows a general correlation with dust extinction features but its intensity peaks are located in thin dust areas, rather than the peak dust regions. Furthermore, H{sub 2} emission is weak in the arc A region even though the arc passes through the center of the dust-rich area. Hence, the H{sub 2} emission and dust features, together with those of X-ray and ion line emissions, show the stratified structure of arc A quite well, again confirming its thermal interface nature.

79 ASTRONOMY AND ASTROPHYSICS↗

On the mechanisms of stress relaxation and intensification at the lithium/solid-state electrolyte interface

Under electrochemical cycling, stress intensification and relaxation within small volumes at the lithium/solid-state electrolyte (SSE) interface are thought to be critical factors contributing to mechanical failure of the SSE and subsequent short-circuiting of the device. Nanoindentation has been used to examine the diffusion-limited pressure lithium can support in the absence of active dislocation sources at high homologous temperatures. Based on the underlying physics of this deformation mechanism, a simple perturbation model coupling local current density, elastic stress, and diffusional creep relaxation is introduced. Combining this analysis with the indentation results, it is possible to describe a defect length scale which is too large for effective diffusional creep relaxation, but too small for efficient dislocation multiplication. In this instance, the properties of the SSE may become critical, and relevant indentation results of the SSE are described. Lastly, the final outcome of the proposed analysis is a newly developed deformation mechanism map.

36 MATERIALS SCIENCE↗

jaxhps: An elliptic PDE solver built with machine learning in mind

Elliptic partial differential equations (PDEs) can model many physical phenomena, such as electrostatics, acoustics, wave propagation, and diffusion. In scientific machine learning settings, a high-throughput PDE solver may be required to generate a training dataset, run in the inner loop of an iterative algorithm, or interface directly with a deep neural network. To provide value to machine learning users, such a PDE solver must be compatible with standard automatic differentiation frameworks, scale efficiently when run on graphics processing units (GPUs), and maintain high accuracy for a large range of input parameters. We have designed the jaxhps package with these use-cases in mind by implementing a highly efficient and accurate solver for elliptic problems with native hardware acceleration and automatic differentiation support.

97 MATHEMATICS AND COMPUTING↗

Quantum Monte Carlo Endstation for Petascale Computing

The major achievements enabled by QMC Endstation grant include * Performance improvement on clusters of x86 multi-core systems, especially on Cray XT systems * New and improved methods for the wavefunction optimizations * New forms of trial wavefunctions * Implementation of the full application on NVIDIA GPUs using CUDA The scaling studies of QMCPACK on large-scale systems show excellent parallel efficiency up to 216K cores on Jaguarpf (Cray XT5). The GPU implementation shows speedups of 10-15x over the CPU implementation on older generation of x86. We have implemented hybrid OpenMP/MPI scheme in QMC to take advantage of multi-core shared memory processors of petascale systems. Our hybrid scheme has several advantages over the standard MPI-only scheme. * Memory optimized: large read-only data to store one-body orbitals and other shared properties to represent the trial wave function and many-body Hamiltonian can be shared among threads, which reduces the memory footprint of a large-scale problem. * Cache optimized: the data associated with an active Walker are in cache during the compute-intensive drift-diffusion process and the operations on an Walker are optimized for cache reuse. Thread-local objects are used to ensure the data affinity to a thread. * Load balanced: Walkers in an ensemble are evenly distributed among threads and MPI tasks. The two-level parallelism reduces the population imbalance among MPI tasks and reduces the number of point-to-point communications of large messages (serialized objects) for the Walker exchange. * Communication optimized: the communication overhead, especially for the collective operations necessary to determine ET and measure the properties of an ensemble, is significantly lowered by using less MPI tasks. The multiple forms of parallelism afforded by QMC algorithms make them ideal candidates for acceleration in the many-core paradigm. We presented the results of our effort to port the QMCPACK simulation code to the NVIDIA CUDA GPU platform. We restructured the CPU algorithms to express additional parallelism, minimize GPU-CPU communication, and efficiently utilize the GPU memory hierarchy. Using mixed precision on GT200 GPUs and MPI for intercommunication and load balancing, we observe typical full-application speedups of approximately 10x to 15x relative to quad-core Xeon CPUs alone, while reproducing the double-precision CPU results within statistical error. We developed an all-electron quantum Monte Carlo (QMC) method for solids that does not rely on pseudopotentials, and used it to construct a primary ultra-high-pressure calibration based on the equation of state of cubic boron nitride. We computed the static contribution to the free energy with the QMC method and obtained the phonon contribution from density functional theory, yielding a high-accuracy calibration up to 900 GPa usable directly in experiment. We computed the anharmonic Raman frequency shift with QMC simulations as a function of pressure and temperature, allowing optical pressure calibration. In contrast to present experimental approaches, small systematic errors in the theoretical EOS do not increase with pressure, and no extrapolation is needed. This all-electron method is applicable to first-row solids, providing a new reference for ab initio calculations of solids and benchmarks for pseudopotential accuracy. We compared experimental and theoretical results on the momentum distribution and the quasiparticle renormalization factor in sodium. From an x-ray Compton-profile measurement of the valence-electron momentum density, we derived its discontinuity at the Fermi wavevector finding an accurate measure of the renormalization factor that we compared with quantum-Monte-Carlo and G0W0 calculations performed both on crystalline sodium and on the homogeneous electron gas. Our calculated results are in good agreement with the experiment. We have been studying the heat of formation for various Kubas complexes of molecular hydrogen on Ti(1,2)ethylene-nH2 using Diffusion Monte Carlo. This work has been started and is ongoing. We are studying systems involving 1 and 2 Ti bonding sites with up to 10 hydrogen molecules in numerous configurations. This work will establish a benchmark that will test the accuracy of density functional calculations and establish the feasibility of our methods for similar systems.

97 MATHEMATICS AND COMPUTING↗

Review of Dissimilar Metal Welding for the NGNP Helical-Coil Steam Generator

The U.S. Department of Energy (DOE) is currently funding research and development of a new high temperature gas cooled reactor (HTGR) that is capable of providing high temperature process heat for industry. The steam generator of the HTGR will consist of an evaporator economizer section in the lower portion and a finishing superheater section in the upper portion. Alloy 800H is expected to be used for the superheater section, and 2.25Cr 1Mo steel is expected to be used for the evaporator economizer section. Dissimilar metal welds (DMW) will be needed to join these two materials. It is well known that failure of DMWs can occur well below the expected creep life of either base metal and well below the design life of the plant. The failure time depends on a wide range of factors related to service conditions, welding parameters, and alloys involved in the DMW. The overall objective of this report is to review factors associated with premature failure of DMWs operating at elevated temperatures and identify methods for extending the life of the 2.25Cr 1Mo steel to alloy 800H welds required in the new HTGR. Information is provided on a variety of topics pertinent to DMW failures, including microstructural evolution, failure mechanisms, creep rupture properties, aging behavior, remaining life estimation techniques, effect of environment on creep rupture properties, best practices, and research in progress to improve DMW performance. The microstructure of DMWs in the as welded condition consists of a sharp chemical concentration gradient across the fusion line that separates the ferritic and austenitic alloys. Upon cooling from the weld thermal cycle, a band of martensite forms within this concentration gradient due to high hardenability and the relatively rapid cooling rates associated with welding. Upon aging, during post weld heat treatment (PWHT), and/or during high temperature service, C diffuses down the chemical potential gradient from the ferritic 2.25Cr 1Mo steel toward the austenitic alloy. This can lead to formation of a soft C denuded zone near the interface on the ferritic steel, and nucleation and growth of carbides on the austenitic side that are associated with very high hardness. These large differences in microstructure and hardness occur over very short distances across the fusion line (~ 50 100 ?m). A band of carbides also forms along the fusion line in the ferritic side of the joint. The difference in hardness across the fusion line increases with increasing aging time due to nucleation and growth of the interfacial carbides. Premature failure of DMWs is generally attributed to several primary factors, including: the sharp change in microstructure and mechanical properties across the fusion line, the large difference in coefficient of thermal expansion (CTE) between the ferritic and austenitic alloys, formation of interfacial carbides that lead to creep cavity formation, and preferential oxidation of the ferritic steel near the fusion line. In general, the large gradient in mechanical properties and CTE serve to significantly concentrate the stress along the fusion where a creep susceptible microstructure has evolved during aging. Presence of an oxide notch can concentrate the stress even further. Details of the failure mechanism and the relative importance of each factor varies.

2.25Cr-1Mo↗

Thermoelectric transport coefficients in mono-layer MoS{sub 2} and WSe{sub 2}: Role of substrate, interface phonons, plasmon, and dynamic screening

The thermoelectric transport coefficients of electrons in two recently emerged transition metal di-chalcogenides (TMD), MoS{sub 2} and WSe{sub 2}, are calculated by solving Boltzmann transport equation using Rode's iterative technique in the diffusive transport regime and the coupled current (electrical and heat) equations. Scattering from remote phonons along with the hybridization of TMD plasmon with remote phonon modes and dynamic screening under linear polarization response are investigated in TMDs sitting on a dielectric environment. The transport coefficients are obtained for a varying range of temperature and doping density for three different types of substrates—SiO{sub 2}, Al{sub 2}O{sub 3}, and HfO{sub 2}. The Seebeck co-efficient for MoS{sub 2} and WSe{sub 2} is found to be higher than 3D semiconductors even with diffusive transport. The electronic thermal conductivity is found to be low, however, the thermoelectric figure of merit is limited by the high phonon thermal conductivity. It is found that judicious selection of a dielectric environment based on temperature of operation and carrier density is crucial to optimize the thermoelectric performance of TMD materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural and Dynamical Relationships of Ca 2+ and H 2 O in Smectite/ 2 H 2 O Systems

We present an X-ray diffraction and multi-nuclear ( 2 H and 43 Ca) NMR study of Ca-exchanged hectorite (a smectite clay) that provides important new insight into molecular behavior at the smectite-H 2 O interface. Variable-temperature 43 Ca MAS NMR and controlled humidity XRD indicate that Ca 2+ occurs as proximity-restricted outer-sphere hydration complexes between –120 and +25 °C in a two-layer hydrate and at T ≤ –50 °C in a 2:1 water/solid paste. Changes in the 43Ca NMR peak width and position with temperature are more onsistent with diffusion-related processes than with dynamics involving metal-surface interactions such as site exchange. The 2 H NMR signal between –50 and +25 °C for a two-layer hydrate of Ca-hectorite is similar to that of Na- and other alkali metal hectorites and represents 2 H 2 O molecules experiencing anisotropic motion describable using the 2 H C 2 /C 3 jump model we proposed previously. 2 H T 1 relaxation results for Ca- and Na-hectorite are well fit with a fast-exchange limit, rotational diffusion model for 2 H 2 O dynamics, yielding GHz-scale rotational reorientation rates compatible with the C 3 component of the C 2 /C 3 hopping model. The apparent activation energy for 2 H 2 O rotational diffusion in the two-layer hydrate is greater for Ca-hectorite than Na-hectorite (25.1 vs. 21.1 kJ/mol), consistent with the greater affinity of Ca 2+ for H 2 O. The results support the general principle that the dynamic mechanisms of proximity-restricted H 2 O are only weakly influenced by the cation in alkali metal and alkaline earth metal smectites and provide critical evidence that the NMR resonances of charge-balancing cations in smectites become increasingly influenced by diffusion-like dynamic processes at low temperatures as the charge density of the unhydrated cation increases.

2H NMR↗