Search NASA⌕ Search

SEARCH · Search NASA

Results for “interlayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Access and Capture of Layered Double Perovskite Polytypic Phase through High-Pressure Engineering

Engineering halide perovskites through external pressure is as an effective means to tune the crystal structure, thus optoelectronic properties of the material. In this work, we studied the structural and optical property evolutions of Cs 4 M II Bi 2 Cl 12 (M II : Cd, Cd 0.8 Mn 0.2 , Mn) layered double perovskite (LDP) crystalline powders under high pressure. A novel polytypic phase transition was observed featuring lateral interlayer sliding of the Bi–M II –Bi trilayer units, resulting in a new LDP-12R phase. Importantly, this high-pressure induced LDP-12R crystal phase can be preserved after complete decompression and captured at ambient conditions. Moreover, the LDP samples showed a pressure-dependent photoluminescence property. Finally, our findings exemplified a new perovskite polytype that can be accessed and captured through high-pressure processing, advocating the uniqueness of LDP materials with soft and transformable crystal lattices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure-Dependent Magnetic Properties of Quasi-2D Cr 2 Si 2 Te 6 and Mn 3 Si 2 Te 6

Recently, pressure has been used to induce structural and magnetic phase transitions in many layered quantum materials whose layers are linked by van der Waals forces. Materials with such weakly held layers allow for relatively easy manipulation of the superexchange mechanism, which can give rise to novel magnetic behavior. Here, using hydrostatic pressure as a disorderless means to manipulate the interlayer coupling, we applied pressure on two quasi-2D sister compounds, namely, Cr 2 Si 2 Te 6 (CST) and Mn 3 Si 2 Te 6 (MST), up to ~1 GPa. Magnetic property measurements with the application of pressure revealed that the ferromagnetic transition temperature decreases in CST, while the opposite occurs for the ferrimagnetic MST. In MST, magnetization decreases with the increase in pressure, and such a trend is not clearly observed within the pressure range studied for CST. The overall pressure effect on magnetic characteristics such as exchange couplings and magnetic anisotropy energies is also examined theoretically using density functional theory. Exchange coupling in MST is strongly frustrated, and the first nearest neighbor interaction is the most dominant of the components with the strongest pressure dependence. In CST, the exchange coupling parameters exhibit very little dependence on pressure. This combined experimental and theoretical work has the potential to expand to other relevant quantum materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Irradiation-enhanced Interactions at UO 2 /Al 2 O 3 /Al Interfaces

Combustion synthesis is used to prepare thin UO 2 films on aluminum alloy substrates. This simple preparation method involves electrospraying uranyl nitrate + acetylacetone + 2-methoxyethanol solution on the substrate, followed by a short annealing at 350 or 550 °C. The irradiation of films with a 40 Ar 2+ ion beam (energy of 1.7 MeV and fluences of 7.7 × 10 16 and 1.3 × 10 17 ions/cm 2 ) is conducted to investigate irradiation-induced restructuring processes. High-resolution transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) investigations show that the annealing temperature significantly influences the crystallinity and stability of materials during irradiation. A small amount of Mg in the alloy substrate diffuses into the amorphous Al 2 O 3 interfacial layer between the film and the substrate. Local thermal spikes from the incoming ions facilitate the irradiation-induced mixing of immiscible Al 2 O 3 and UO 2 for the materials prepared at 350 °C. This mass diffusion produces relatively large cavities at the interface. Selective diffusion of a more significant amount of Mg for the materials prepared at 550 °C suppresses the mixing of the Al 2 O 3 interlayer with the film but forms Mg y U 1–y O 2±x solid solutions during irradiation. Local thermal heating triggers the precipitation of a discontinuous crystalline MgO layer close to the film surface. As a result, the enhanced and selective diffusion of Mg into the film makes the materials prepared at 550 °C more robust and mechanically stable than those prepared at 350 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Wavelength-Dependent Excitonic Properties of Covalent Organic Frameworks Explored by Theory and Experiments

Many aspects of the correlation between physical structure, light harvesting, and excitonic properties of covalent organic frameworks (COFs) remain unclear despite being key properties determining their photocatalytic function. One area of COF research that could bring clarity is through using both electronic structure theory and time-resolved spectroscopic analysis over a series of isomeric COFs. Here, we show structure-property relationships between four imine COFs built from a combination of ditopic and tritopic monomers using transient absorption spectroscopy together with time-dependent density functional theory. We find that monomer selection only moderately affects the charge transfer (CT) behavior of the COFs. Instead, we infer that imine chemistry profoundly impacts CT by acting as a CT mediator. Moreover, we discover two distinct valence bands arising from varying degrees of locally excited/CT mixing, which is responsible for energy dependent exciton dynamics. Finally, we use theory to hypothesize that interlayer interactions can modify excitonic properties that we correlate with tail states commonly observed, but rarely investigated in COFs. Furthermore, these results reveal that imine chemistry should be recognized as a very important factor to consider in the development of COF photocatalysts and the correlation of their structural environment with light harvesting and CT properties that should ultimately determine their photocatalytic function.

14 SOLAR ENERGY↗

Lifshitz Transition and Band Structure Evolution in Alkali Metal Intercalated 1T′-MoTe 2

In van der Waals materials, coupling between adjacent layers is weak, and consequently interlayer interactions are weakly screened. This opens the possibility to profoundly modify the electronic structure, e.g., by applying electric fields or with adsorbates. Here, in this study, we show for the case of the topologically trivial semimetal 1T′-MoTe 2 that potassium dosing at room temperature significantly transforms its band structure. With a combination of angle-resolved photoemission spectroscopy, scanning tunneling microscopy, X-ray photoemission spectroscopy, and density functional theory we show that (i) for small concentrations of K, 1T′-MoTe 2 undergoes a Lifshitz transition with the electronic structure shifting rigidly, and (ii) for larger K concentrations 1T′-MoTe 2 undergoes significant band structure transformation. Our results demonstrate that the origin of this electronic structure change stems from alkali metal intercalation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Long-Lived Charge-Transfer Excitons in a Graphene–PTCDI–TiOPc Trilayer Heterostructure

Excitation transfer across the interfaces between graphene, perylenetetracarboxylic diimide (PTCDI), and titanyl phthalocyanine (TiOPc) was studied by using transient absorption and photoluminescence spectroscopy. Both photoluminescence quenching and transient absorption measurements confirm the presence of a type-II interface between PTCDI and TiOPc. While the graphene/PTCDI interface is expected to exhibit type-I behavior, transient absorption measurements indicate that only electrons transfer from PTCDI to graphene, with no evidence of hole transfer. Density functional theory calculations reveal significant ground-state electron transfer from graphene to PTCDI, resulting in band bending that prevents excited holes from transferring from PTCDI to graphene. This feature is exploited in a trilayer heterostructure of graphene/PTCDI/TiOPc, where the spatial separation of photoexcited electrons and holes in graphene and TiOPc, respectively, leads to the formation of long-lived photoexcitations with a lifetime of approximately 500 ps. Furthermore, spatially resolved transient absorption measurements reveal the immobile nature of these excitations, confirming that they are charge-transfer excitons rather than free electrons and holes. Furthermore, these results provide valuable insights into the complex interlayer photoexcitation transfer properties and demonstrate precise control over the layer population and the recombination lifetime of photocarriers in such hybrid heterostructures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Insight into hydrogen bonding of uranyl hydroxide layers and capsules by use of 1 H magic-angle spinning NMR spectroscopy [Insight into the hydrogen bonding for uranyl hydroxides using 1 H MAS NMR spectroscopy]

Solid-state 1 H magic-angle spinning (MAS) NMR was used to investigate local proton environments in anhydrous [UO 2 (OH) 2 ] (α-UOH) and hydrated uranyl hydroxide [(UO 2 ) 4 O(OH) 6 ·5H 2 O (metaschoepite). For the metaschoepite material, proton resonances of the μ 2 -OH hydroxyl and interlayer waters were resolved, with two-dimensional (2D) double-quantum (DQ) 1 H– 1 H NMR correlation experiments revealing strong dipolar interactions between these different proton species. The experimental NMR results were combined with first-principles CASTEP GIPAW (gauge including projector-augmented wave) chemical shift calculations to develop correlations between hydrogen-bond strength and observed 1 H NMR chemical shifts. Furthermore, these NMR correlations allowed characterization of local hydrogen-bond environments in uranyl U 24 capsules and of changes in hydrogen bonding that occurred during thermal dehydration of metaschoepite.

36 MATERIALS SCIENCE↗

Calorimetric Determination of Thermodynamic Stability of MAX and MXene Phases

MXenes are layered two dimensional materials with exciting properties useful to a wide range of energy applications. They are derived from ceramics (MAX phases) by leaching and their properties reflect their resulting complex compositions which include intercalating cations and anions and water. Their thermodynamic stability is likely linked to these functional groups but has not yet been addressed by quantitative experimental measurements. We report enthalpies of formation from the elements at 25 °C measured using high temperature oxide melt solution calorimetry for a layered Ti-Al-C MAX phase, and the corresponding Ti-C based MXene. The thermodynamic stability of the Ti 3 C 2 T x MXene (Tx stands for anionic surface moieties, and intercalated cations) was assessed by calculating the enthalpy of reaction of the MAX phase (ideal composition Ti 3 AlC 2 ) to form MXene, The very exothermic enthalpy of reaction confirms the stability of MXene in an aqueous environment. The surface terminations (O, OH and F) and cations (Li) chemisorbed on the surface and intercalated in the interlayers play a major role in the thermodynamic stabilization of MXene. These findings help to understand and potentially improve properties and performance by characterizing the energetics of species binding to MXene surfaces during synthesis and in energy storage, water desalination and other applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Calorimetric Study of Alkali Metal Ion (K + , Na + , Li + ) Exchange in a Clay-Like MXene

Intercalation of ions in layered materials has been explored to improve the rate capability in Li-ion batteries and supercapacitors. This work investigates the energetics of alkali ion exchange in a clay-like MXene, Ti 3 C 2 T x , where T x stands for anionic surface moieties, by immersion calorimetry in aqueous solutions. The measured immersion enthalpies of clay-like Ti 3 C 2 T x , ΔH imm , at 25 °C in 1 M KCl, 1 M NaCl, 1 M LiCl, and nanopure water are -9.19 (±0.56), -5.90 (±0.31), -1.31 (±0.20), and -1.29 (±0.13) kJ/mol of MXene, respectively. Inductively coupled plasma mass spectrometry is used to obtain the concentrations of alkali ions in the solid and aqueous phases. Using these concentrations, the enthalpies of exchange of alkali metal ions (Li+, Na+, and K+) are calculated; ΔHex in 1 M KCl, 1 M NaCl, 1 M LiCl, and nanopure water are -9.3 (±2.2), 21.0 (±0.9), -1.3 (±0.2), and 302.4 (±0.6) kJ/mol of MXene, respectively. Both immersion and exchange enthalpies are most exothermic for potassium. This suggests that K+ ions interact more strongly with anions present in the interlayers of this MXene than Na + and Li + ions. Water vapor adsorption calorimetry indicates very weak interaction of water with the MXene, while immersion calorimetry suggests a weakly hydrophilic nature of the MXene surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular Level Investigation of CH 4 and CO 2 Adsorption in Hydrated Calcium–Montmorillonite

We have studied the mechanism of intercalation and methane adsorption from a H2O/CH4/CO2 mixture on a prototypical shale component, Ca-montmorillonite. We employed ab initio molecular dynamics simulations at 323 K and 90 bar to obtain molecular level information of adsorption energetics, speciation, and structural and thermodynamic properties. Interaction of CH4 with surface Lewis acidic sites (Ca2+, surface OH) results in large induced dipoles (~1 D) that lead to relatively strong adsorption energies that level off once a full CH4 layer is formed. Intercalated CH4, also exhibits induced dipoles at low hydration levels, when the interaction with Ca2+ cations are less hindered. CO2 displaces CH4 in the coordination sphere of the cations (in the interlayer) or in the surface, thereby driving CH4 extraction. Our simulations indicate that there is a Goldilocks pressure range (~60-100 bar) where scCO2 –facilitated CH4 extraction will be maximized.

AIMD↗

Domain Structures of Ni and NiFe (Oxy)Hydroxide Oxygen-Evolution Catalysts from X-ray Pair Distribution Function Analysis

Ni-Fe (oxy)hydroxides, Ni( i-z )Fe z O x H y , are among the fastest-known water oxidation catalysts in alkaline media on a per-cation basis. At current densities relevant for electrolysis (e.g., >0.5 A/cm( -2 )), mass and electron transport through catalyst films with high mass loading are critical and depend substantially on the extended and intermediate catalyst architecture. We use X-ray pair distribution function (PDF) analysis to determine the intermediate nanostructures of electrodeposited Ni( i-z )Fe z O x H y films. We report the effects of electrodeposition technique (pulsed versus continuous), electrochemical cycling, and Fe content on the structure of the catalyst film. The PDF patterns for Ni( i-z )Fe z O x H y films are best simulated by model structures consisting of brucite-like β-Ni(OH) 2 fragments 1 to 3 layers in thickness. Only the oxidation state of the film significantly affects the intralayer scattering behavior (i.e., metal-oxygen bond distance). The interlayer interactions, however, are affected by Fe content and deposition conditions. The domain size of many of the systems are similar, extending to similar to ~5 nm, which are best modeled by sheets containing upward of similar to ~250 metal cations. Smaller domains were found for films deposited through a larger number of electrochemical cathodic current pulses. Films can be cycled between as-deposited, oxidized, and reduced states, with minimal loss of intrasheet coherence, indicating a degree of structural stability. We estimate heterogeneity in the domain structures by modeling the PDF data to linear combinations of oxyhydroxide fragments with different sizes and numbers of layers.

36 MATERIALS SCIENCE↗

Molecular Dynamics Simulations of the Adsorption of Phthalate Esters on Smectite Clay Surfaces

The partitioning of organic contaminants between water and solid surfaces is a key process controlling their fate and transport in natural environments. A novel methodology was developed to predict the adsorption of organic contaminants by smectite clay minerals (high specific surface area adsorbents abundant in natural soils) using molecular dynamics (MD) simulations. The methodology models a stack of flexible Ca- montmorillonite lamellae in direct contact with a bulk aqueous reservoir and uses the metadynamics technique to facilitate the exploration of the free energy landscape. The methodology was tested and validated in the case of six phthalate esters, widely used chemical plasticizers with endocrine disrupting properties. Simulation predictions reveal strong phthalate adsorption, especially for the larger and more hydrophobic phthalates. Predicted partition coefficients (K d values) are consistent with collected batch experimental data. Adsorption was observed on both the exterior basal surfaces and within the interlayer nanopore, with phthalate molecules predominately adopting a flat orientation on the clay surface. Intercalation was also detected in complementary X-ray diffraction (XRD) experiments. A strong inverse relationship between extent of adsorption and clay surface charge density was observed, as phthalate molecules preferentially occupied the more hydrophobic uncharged patches on each surface. Detailed analysis of the free energy of adsorption revealed that phthalate affinity for the clay surface results from a small favorable van der Waals contribution and a large favorable entropic contribution. Overall, this research demonstrates the substantial affinity of smectite clays for phthalate esters and establishes a computational methodology capable of predicting the water-clay partition coefficients of organic contaminants, a key parameter in environmental fate and transport models.

36 MATERIALS SCIENCE↗

Automated Detection and Characterization of Surface Restructuring Events in Bimetallic Catalysts

Surface restructuring in bimetallic systems has recently been shown to play a crucial role in heterogeneous catalysis. In particular, the segregation in binary alloys can be reversed in the presence of strongly bound adsorbates. Mechanistic characterization of such restructuring phenomena at the atomic level remains scarce and challenging because of the large configurational space that must be explored. To this end, we propose an automated method to discover elementary surface restructuring processes in an unbiased fashion using Pd/Ag as an example. Here, we employ high-temperature classical molecular dynamics to rapidly detect restructuring events, isolate them, and optimize using density functional theory. In addition to confirming the known exchange descent mechanism, our systematic approach has revealed three new predominant classes of events at step edges of close-packed surfaces that have not been considered before: (1) vacancy insertion; (2) direct exchange; and (3) interlayer exchange. The discovered events enable us to construct the complete set of mechanistic pathways by which Pd is incorporated into the Ag host in vacuum at the single-atom limit. Finally, these atomistic insights provide a step toward systematic understanding and engineering of surface segregation dynamics in bimetallic catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure-Driven Sequential Lattice Collapse and Magnetic Collapse in Transition-Metal-Intercalated Compounds Fe x NbS 2

Volume collapse under high pressure is an intriguing phenomenon involving subtle interplay between lattice, spin, and charge. The two most important causes of volume collapse are lattice collapse (low-density to high-density) and magnetic collapse (high-spin to low-spin). Herein we report the pressure-driven sequential volume collapses in partially intercalated Fe x NbS 2 (x = 1/4, 1/3, 1/2, 2/3). Because of the distinct interlayer atomic occupancy, the low-iron-content samples exhibit both lattice and magnetic collapses under compression, whereas the high-iron-content samples exhibit only one magnetic collapse. Therefore, theoretical calculations indicate that the low-pressure volume collapses for x = 1/4 and x = 1/3 are lattice collapses, and the high-pressure volume collapses for all four samples are magnetic collapses. The magnetic collapse involving the high-spin to low-spin crossover of Fe2+ has also been verified by in situ X-ray emission measurements. Integrating two distinct volume collapses into one material provides a rare playground of lattice, spin, and charge.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Imaging Charged Exciton Localization in van der Waals WSe 2 /MoSe 2 Heterobilayers

Exciton localization in transition-metal dichalcogenide monolayers is behind a variety of interesting phenomena and applications, including broad-spectrum solar cells and singlephoton emissions. Strain fields at the periphery of topographically distinct features such as nanoscopic bubbles were recently associated with localized charge-neutral excitons. Here, we use tip-enhanced photoluminescence (PL) to visualize excitons in WSe 2 /MoSe 2 heterobilayers (HBL). We find strong optical emission from charged excitons, particularly positively charged trions, in HBL supported by interlayer charge transfer. Our results reveal strong trion confinement, with a localization length scale comparable to the trion size, at the apex region inside individual nanoscopic bubbles. Nano-PL mapping also shows sub-10 nm spatial variations in the localized trion emission spectra, which stem from atomic-scale potential energy fluctuations. These findings demonstrate the possibility of confining charged exciton complexes that are electrically tunable, opening up further opportunities to probe many-body exciton physics, and to explore additional possible sites for strong exciton localization that can lead to quantum emissions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Designing the Nanoconfined Environment for Energy-Efficient Metal Nanoparticle/Ligand-Based Electrocatalysts

Nanoconfined electrocatalysts demonstrate enhanced selectivity and activity owing to new phenomena emerging from chemical species confined at the interface. Creating these nanoconfined pockets at the interface is not trivial. We need highly negative potentials to create the pockets in metal/ligand catalysts like Ag-nanoparticle/ordered ligand interlayer catalysts. Lowering this activation potential can make the electrocatalysis more energy-efficient, and changes in the environment can impact this potential. We used Density Functional Theory (DFT) to evaluate the impact of ligand length and density, interfacial protons, and surface defects like Ag vacancies and Cu and Au dopants. The nanoconfined configuration is stabilized when the ligands are longer and more densely packed, leading to better agglomeration. It is also stabilized when the ligands adsorb protons and when the ligands detach from the surface easily owing to lower charge transfer. Au-doped surfaces displayed the lowest charge transfer and decreased the activation potential.

Jana, Asmita↗

Formation of Carbon–Carbon Interlinkage Bonds under High Pressure

The formation of carbon–carbon interlinkage bonds (CCIBs) via the chemical binding of interlayer carbon atoms of many sp 2 -bonded carbon precursors is an essential step for synthesizing various diamond and diamond-like materials. Although the existence of CCIBs may be reasonably assumed under high-pressure conditions, direct experimental evidence has been scarce. Micro-Raman spectroscopy is here employed to track in situ the evolution of C–C bonds in a pressure range from ambient to 54 GPa. A pressure-induced two-stage (polynomial and linear) shift of the G peak and new generation of the CCIB peak at about 1550 cm –1 are observed in multiple types of layer-structured carbon precursors, including glassy carbon, natural graphite, and carbon nanotubes. In conclusion, the experimental discovery of CCIBs holds significance in comprehending phase transitions of sp 2 -bonded carbon materials and has implications for the advancement of novel carbon structures.

Anode materials↗