SEARCH · Search NASA
Results for “model interpretability”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Compton scattering from He 4 at 61 MeV
The Compton scattering cross section from 4 He has been measured with high statistical accuracy over a scattering angle range of 40° - 159° using a quasimonoenergetic 61-MeV photon beam at the High Intensity Gamma-Ray Source. The data are interpreted using a phenomenological model sensitive to the dipole isoscalar electromagnetic polarizabilities (α s and β s ) of the nucleon. These data can be fit with the model using values of α s and β s that are consistent with the currently accepted values. Finally, these data will serve as benchmarks of future calculations from effective field theories and lattice quantum chromodynamics.
Kinetics of photoinduced ordering in azo-dye films: Two-state and diffusion models
We theoretically study the kinetics of photoinduced ordering in azo-dye photoaligning layers and present the results of modeling performed using two different phenomenological approaches. A phenomenological two-state model is deduced from the master equation for the one-particle distribution functions of an ensemble of two-level molecular systems by specifying the angular redistribution probabilities and by expressing the order parameter correlation functions in terms of the order parameter tensor. Using an alternative approach that describes light-induced reorientation of azo-dye molecules in terms of a rotational Brownian motion, we formulate the two-dimensional diffusion model as the free energy Fokker-Planck equation simplified for the limiting regime of purely in-plane reorientation. The models are employed to interpret the irradiation time dependence of the absorption order parameters defined in terms of the principal extinction (absorption) coefficients. Using the exact solution to the light transmission problem for a biaxially anisotropic absorbing layer, these coefficients are extracted from the absorbance-vs-incidence angle curves measured at different irradiation doses for the probe light linearly polarized parallel and perpendicular to the plane of incidence. It is found that, in the azo-dye films, the transient photoinduced structures are biaxially anisotropic whereas the photosteady and the initial states are uniaxial.
Radiation-induced mechanical property changes in filled rubber
In a recent paper we exposed a filled elastomer to controlled radiation dosages and explored changes in its cross-link density and molecular weight distribution between network junctions [A. Maiti et al., Phys. Rev. E 83, 031802 (2011)]. Here we report mechanical response measurements when the material is exposed to radiation while being under finite nonzero strain. We observe interesting hysteretic behavior and material softening representative of the Mullins effect, and materials hardening due to radiation. The net magnitude of the elastic modulus depends upon the radiation dosage, strain level, and strain-cycling history of the material. Using the framework of Tobolsky's two-stage independent network theory we develop a model that can quantitatively interpret the observed elastic modulus and its radiation and strain dependence.
Evidence of Sequentially Formed Charge Patches Guiding Ions through Nanocapillaries
We investigated the time evolution of the dynamically shifting distribution of 7 keV Ne{sup 7+} ions guided through nanocapillaries in SiO{sub 2}. We present evidence for a small number of charge patches, formed sequentially in the charging-up process, guiding the ions. We show that the charge patches are distributed along the whole length of the capillaries and that they are maintained in the equilibrium state of transmission. The interpretations are supported by model calculations.
Role of Local Structure in the Enhanced Dynamics of Deformed Glasses
External stress can accelerate molecular mobility of amorphous solids by several orders of magnitude. The changes in mobility are commonly interpreted through the Eyring model, which invokes an empirical activation volume. Here, we analyze constant-stress molecular dynamics simulations and propose a structure-dependent Eyring model, connecting activation volume to a machine-learned field, softness. We show that stress has a heterogeneous effect on the mobility that depends on local structure through softness. The barrier impeding relaxation reduces more for well-packed particles, which explains the narrower distribution of relaxation time observed under stress.
Probing Electronic Coherence between Core-Level Vacancies at Different Atomic Sites
The detailed understanding of electronic coherence in quantum systems requires measurements on the attosecond timescale. Attosecond x-ray pulses enable the study of electronic coherence in core-excited molecular systems. Here we report on the coherent motion of electrons in the 1,1-difluoroethylene ion following ionization of the K shell of the two nonequivalent carbon sites with a subfemtosecond x-ray pulse. Using the angular streaking technique to track the Auger-Meitner decay, we observe temporal modulations of the emission, indicating the electronic coherence of the core-excited ionic states, and extract a 6.5 ± 0.8 fs average lifetime of the core-level vacancies. A quantum-mechanical model is employed to interpret the measurement, and we find the observed temporal modulations are independent of charge density oscillations. This work opens a new regime of coherent electronic motion, beyond charge migration, where electronic coherence manifests in the nonlocal quantum correlation between atomic sites while charge density oscillation is absent. Our results broaden the landscape of electronic coherence in molecular systems. Published by the American Physical Society 2025
Novel experimental setup for megahertz X-ray diffraction in a diamond anvil cell at the High Energy
Explore the source record for details and available documents.
A round-robin approach provides a detailed assessment of biomolecular small-angle scattering data reproducibility and yields consensus curves for benchmarking
Through an expansive international effort that involved data collection on 12 small-angle X-ray scattering (SAXS) and four small-angle neutron scattering (SANS) instruments, 171 SAXS and 76 SANS measurements for five proteins (ribonuclease A, lysozyme, xylanase, urate oxidase and xylose isomerase) were acquired. From these data, the solvent-subtracted protein scattering profiles were shown to be reproducible, with the caveat that an additive constant adjustment was required to account for small errors in solvent subtraction. Further, the major features of the obtained consensus SAXS data over the q measurement range 0–1 Å −1 are consistent with theoretical prediction. The inherently lower statistical precision for SANS limited the reliably measured q -range to <0.5 Å −1 , but within the limits of experimental uncertainties the major features of the consensus SANS data were also consistent with prediction for all five proteins measured in H 2 O and in D 2 O. Thus, a foundation set of consensus SAS profiles has been obtained for benchmarking scattering-profile prediction from atomic coordinates. Additionally, two sets of SAXS data measured at different facilities to q > 2.2 Å −1 showed good mutual agreement, affirming that this region has interpretable features for structural modelling. SAS measurements with inline size-exclusion chromatography (SEC) proved to be generally superior for eliminating sample heterogeneity, but with unavoidable sample dilution during column elution, while batch SAS data collected at higher concentrations and for longer times provided superior statistical precision. Careful merging of data measured using inline SEC and batch modes, or low- and high-concentration data from batch measurements, was successful in eliminating small amounts of aggregate or interparticle interference from the scattering while providing improved statistical precision overall for the benchmarking data set.
Evaluation of Surface Crack Formation in Photovoltaic Backsheets Using Fragmentation and Finite Element Simulations
Backsheet cracking is among the most commonly observed degradation modes of photovoltaic modules in the field. Cracks can reduce the ability of backsheets to fulfill their functions, such as protection of the modules from the environment or electrical insulation. Here, this work presents an evaluation of the degradation and cracking propensity of two backsheets during accelerated IEC TS 62788-7-2 (International Electrotechnical Commission) aging under the A3 condition with a fragmentation test using a coextruded polyamide backsheet (AAA), and a laminated multilayer backsheet with a polyethylene terephthalate core and outer layer and ethylene vinyl acetate inner layer (PPE). Results show the surface embrittlement of the AAA outer layer during exposure. A longer time of exposure causes cracks to form at lower strains during stretching and creates deeper cracks. Accordingly, Young's modulus of the outer layer increases, as measured by cross-sectional nanoindentation. PPE exhibits cracking after exposure as well. While no similar increase of modulus or crack depth can be observed, the outer layer of PPE exhibits more obvious signs of erosion during exposure, including progressive morphological changes and thickness losses. A finite element model is developed to simulate surface crack formation, based on initially zero-thickness decohesion elements. Decohesion criteria define a critical stress, at which these elements grow, and cracks can begin to form. These criteria are obtained via parameter optimization by comparison between simulation and experiment. The model is used to interpret crack formation in both backsheets.
Spectrum-per-Pixel Cathodoluminescence Imaging of CdTe Thin-Film Bevels
We conduct T=6 K cathodoluminescence (CL) spectrum imaging with a nano-scale electron beam on beveled surfaces of CdTe thin-films at different critical stages of standard CdTe device fabrication. The through-thickness total CL intensity profiles are consistent with a reduction in grain boundary recombination due to the CdCl2 treatment. Color-coded maps of the low-temperature luminescence transition energies reveal that CdTe thin films have remarkably non-uniform opto-electronic properties, which depend strongly on sample processing history. The grain-to-grain S content in the interdiffused CdTe/CdS region is estimated from a sample size of thirty-five grains, and the S content in adjacent grains varies significantly in CdCl2-treated samples. A low-temperature luminescence model is developed to interpret spectral behavior at grain boundaries and grain interiors.
The effects of diesel injector needle motion on spray structure.
The internal structure of diesel fuel injectors is known to have a significant impact on the steady-state fuel distribution within the spray. However, little experimental or computational work has been performed on the dynamics of fuel injectors. Recent studies have shown that it is possible to measure the three-dimensional geometry of the injector nozzle, and to track changes in that geometry as the needle opens and closes in real time. This has enabled the dynamics of the injector to be compared with the dynamics of the spray, and allows computational fluid dynamics (CFD) simulations to use realistic time-dependent flow passage geometries. In this study, X-ray phase-enhanced imaging has been used to perform time-resolved imaging of the needle seat area in several common-rail diesel injection nozzles. The fuel distributions of the sprays emitted by these injectors were also studied with fast X-ray radiography. Correlations between eccentric motions of the injector needle valve and oscillations in the fuel density as it emerges from the nozzle are examined. CFD modeling is used to interpret the effect of needle motion on fuel flow.
Review of Ultrasonic Methods for Monitoring, Damage Detection, and Processing of Lithium-Ion Batteries Throughout Their Life Cycle
Lithium-ion batteries (LIBs) are the leading technology used in consumer electronics, electric vehicles, and grid-level electrochemical energy storage applications. The ever-increasing use of LIBs has highlighted a gap in understanding of their behavior throughout their life cycle. Current monitoring systems rely on electrical and sometimes temperature measurements to assess the internal state which limits information about complex electrochemical processes. In response, ultrasonic testing (UT) has shown promise for non-invasive assessment due to its ease of use and sensitivity to mechanical changes which are correlated with electrochemical changes within the battery. We summarize the research in UT methods applied to LIBs throughout their life cycle. We also discuss physics-based and data-driven modeling approaches used to interpret ultrasonic signals in the context of LIBs, with an emphasis on the existing challenge of establishing rigorous links between electrochemical behavior and elastic and poroelastic wave physics to gain insight regarding physical changes in the LIB that can be directly measured using UT. Finally, we discuss the challenges of implementing UT across the LIB life cycle and identify opportunities for further research. This review aims to provide helpful guidance to researchers and practitioners of UT in the growing field of UT for electrochemical battery systems.
Nanostructured crystals of fluorite phases Sr{sub 1-x}R{sub x}F{sub 2+x} (R are rare earth elements) and their ordering: 5. A study of the ionic conductivity of as-grown Sr{sub 1-x}R{sub x}F{sub 2+x} crystals
The ionic conductivity {sigma} of Sr{sub 1-x}R{sub x}F{sub 2+x} crystals (R = Y, La-Lu) has been measured in the temperature range of 324-933 K. The isomorphic introduction of R{sup 3+} ions into SrF{sub 2} is accompanied by an increase in conductivity up to four orders of magnitude, which makes these crystals superionic conductors. It is shown that the conduction mechanism in Sr{sub 1-x}R{sub x}F{sub 2+x} crystals changes when passing from R = La-Nd to R = Sm-Lu. A change in the type of cluster of structural defects between Nd and Sm is suggested. The concentration dependences of {sigma} and the activation energy of charge-carrier migration (E{sub a}) for Sr{sub 1-x}R{sub x}F{sub 2+x} are nonlinear. For crystals with R = La or Nd, these dependences are interpreted within the percolation model of 'defect regions,' the minimum size of which is estimated to be {approx}700 A{sup 3}. It is shown that the electrical properties of the crystals can be controlled by varying the RF{sub 3} type and concentration. The Sr{sub 1-x}R{sub x}F{sub 2+x} crystals (R = La-Nd, 0.3 {<=} x {<=} 0.5), for which {sigma} = (2-3) x 10{sup -2} S/cm at 673 K and E{sub a} = 0.6-0.7 eV, have the best electrolytic characteristics.
Study of the grazing-incidence X-ray scattering of strongly disturbed fractal surfaces
The applicability of different approaches to the description of hard X-ray scattering from rough surfaces is generally limited by a maximum surface roughness height of no more than 1 nm. Meanwhile, this value is several times larger for the surfaces of different materials subjected to treatment, especially in the initial treatment stages. To control the roughness parameters in all stages of surface treatment, a new approach has been developed, which is based on a series expansion of wavefield over the plane eigenstate-function waves describing the small-angle scattering of incident X-rays in terms of plane q-waves propagating through the interface between two media with a random function of relief heights. To determine the amplitudes of reflected and transmitted plane q-waves, a system of two linked integral equations was derived. The solutions to these equations correspond (in zero order) to the well-known Fresnel expressions for a smooth plane interface. Based on these solutions, a statistical fractal model of an isotropic rough interface is built in terms of root-mean-square roughness σ, two-point correlation length l, and fractal surface index h. The model is used to interpret X-ray scattering data for polished surfaces of single-crystal cadmium telluride samples.
Auxiliary glow discharge in the trigger unit of a hollow-cathode thyratron
Results from studies of a low-current glow discharge with a hollow cathode are presented. A specific feature of the discharge conditions was that a highly emissive tablet containing cesium carbonate was placed in the cathode cavity. In the absence of a tablet, the discharge ignition voltage was typically ≥3.5 kV, while the burning voltage was in the range of 500–600 V. The use of the tablet made it possible to decrease the ignition voltage to 280 V and maintain the discharge burning voltage at a level of about 130 V. A model of the current sustainment in a hollow-cathode discharge is proposed. Instead of the conventional secondary emission yield, the model uses a generalized emission yield that takes into account not only ion bombardment of the cathode, but also the emission current from an external source. The model is used to interpret the observed current−voltage characteristics. The results of calculations agree well with the experimental data. It is shown that, in some discharge modes, the external emission current from the cathode can reach 25% of the total discharge current.
Infrared luminescence from silicon nanostructures heavily doped with boron
Intense highly polarized radiation from silicon nanostructures heavily doped with boron to 5 Multiplication-Sign 10{sup 21} cm{sup -3} is studied as a function of temperature, forward current, and an additional lateral electric field. The features of the radiation intensity and degree of polarization suggest that an important role in the formation of the luminescence spectra is played by the ordered system of B{sup +}-B{sup -} dipoles, formed as a result of the reconstruction of shallow boron acceptors as centers with negative correlation energy. The results obtained are interpreted within a proposed model based on two-electron adiabatic potentials, according to which radiation results from donor-acceptor recombination via boron dipole center states, involving shallow phosphorus donors.
Influence of technological defects on the optical and photoelectric properties of AgCd{sub 2-x}Mn{sub x}GaSe{sub 4} alloys
The study is concerned with the photoelectric and optical properties of a AgCd{sub 2-x}Mn{sub x}GaSe{sub 4} alloy with a Mn {yields} Cd isovalent substitution. The positions of the photoconductivity and photoluminescence peaks are determined, and the band gap of the alloy is estimated, based on compositional analysis. The influence of technological defects on specific features of the alloy's photoelectric and optical properties is analyzed. It is established that the centers controlling the alloy crystals' photosensitivity are cation vacancies. The photoluminescence centers responsible for emission at awavelengths from 0.77 to 0.88 {mu}m (dependent on the relation between components in the alloy) are defect complexes consisting of cation and anion vacancies. A physically consistent model is proposed to interpret the effects observed in the alloy.