Search NASA⌕ Search

SEARCH · Search NASA

Results for “performance data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Low Cost Manufacturing of Advanced Silicon-Based Anode Materials

Under the financial support of award DE-EE0007312, Group14 Technologies (G14) has progressed from the lab (~g) to lab-pilot (~kg) manufacturing of a novel silicon-carbon (Si-C) composite that is highly promising as an anode material for next-generation lithium-ion batteries. G14’s Si-C is a drop in for graphite in lithium ion battery anodes, providing for increased energy density while lowering the cost on a capacity basis. At the foundation of the Si-C particle is an amorphous carbon scaffold, with its porosity fine-tuned for promoting intra-particle growth of the desired type and size (amorphous, nano-sized) of high capacity silicon, while also proving for internal volume to ameliorate silicon’s expansion upon lithiation. Both the carbon and silicon within the Si-C composite are produced from readily available, low-cost precursors. At lab scale, we demonstrated the ability to produce Si-C capable of achieving capacity of 1000 mAh/g with minimum 500 cycle stability (up to 1000 cycles with pre-lithiation) in full cell, coin cell lithium ion batteries. Based on such lab experience, we down-selected process and equipment suitable for producing Si-C at lab-pilot scale. The chosen equipment was purchased, installed and commissioned at Group14’s pilot manufacturing facility in Woodinville, WA. In turn, the ability to produce kg quantities facilitated the shipment of Si-C to various third parties. The promising feedback from such third parties included achievement of high first cycle efficiency (up to 92%) and 800 cycle stability in full cell, pouch cell lithium ion batteries. Beyond this highly promising electrochemical performance, it is important to note that G14’s Si-C has also been developed for low cost. Based on estimated production costs, electrochemical performance data, and modeling employing the BatPaC model, we project <$125/kWh for lithium ion battery packs containing G14’s Si-C.

25 ENERGY STORAGE↗

Autonomous, low-energy separation of n-butanol produced from lignocellulosic resources (CRADA AWD00002540)

In this project, the ABPDU team at LBNL was going to perform scale-up and process development of Microvi’s butanol process that has been established at the shake-flask level. The ABPDU team was to perform tech transfer of analytical, and fermentation protocols that the client’s team has developed thus far. The ABPDU team was also going to perform data analysis and mass balances to author a final report. However, the project never proceeded beyond the initial planning stages, and experimental materials were not available for the ABPDU team to begin tech transfer or data analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Developmental Objectives for Advanced Reactor Fuels

For any technology, the pace of development is determined in part by the time and expense required to explore alternatives to the current state of the art. For example, the capabilities of software are growing exponentially in large part because the costs of experimentation are so low (e.g., a programmer can often try out a new idea in a matter of minutes). For nuclear fuels and materials, the time and cost of iterating on alternatives is extremely high, which in turn helps to explain why nuclear reactor development can be excruciatingly slow. The pace of development, however, can be accelerated in two distinct ways: (1) improvements in the productivity of our irradiation testing and post-irradiation examinations infrastructure; (2) the use of a variety of alternatives to radiological work, including physically-based models, extensive literature reviews, increased reliance on out-of-reactor testing, and evaluation of the impact of fuel system developments on reactor plant performance. Viewed in this context, a fuel development program effort consists not only of test pin fabrication, irradiation testing, and post-irradiation examinations, but also on physically-based models, out-of-reactor testing, benchmarking of models against historic fuel performance data, and literature reviews. Of course, elements of these efforts are already in place, but increased emphasis on these activities are expected to speed the fuel development effort. Quite simply, the approach calls for obtaining as much knowledge and understanding as possible using whatever means necessary while minimizing the amount of radiological work that is required. In this manner, once an irradiation test program is designed and initiated, there is not only an improved likelihood that the fuel system will behave as expected but there is also a better chance, if the testing is successful, that the fuel design will result in substantial improvements to reactor plant economics and/or safety.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

AGR-5/6/7 Experiment Monitoring and Simulation Progress

Advanced Gas Reactor (AGR)--5/6/7 is the last of a series of AGR experiments conducted in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) in support of development and qualification of tri-structural isotropic (TRISO) low-enriched fuel for use in high temperature gas-cooled reactors. The test train contains five separate capsules that are independently controlled and monitored. Each capsule contains multiple 12.51 mm long compacts filled with low-enriched uranium carbide/oxide (UCO) TRISO fuel particles. The objectives of the AGR-5/6/7 experiment are to: 1. Irradiate reference-design fuel particles to support fuel qualification. 2. Establish operating margins for the fuel beyond normal operating conditions. 3. Provide irradiated fuel performance data and irradiated fuel samples for post-irradiation examination (PIE) and safety testing.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Atomic kinetics of laboratory photoionized plasmas relevant to astrophysics. Final report

The major goal of this project was to study the atomic and radiation physics of photoionized plasmas driven by a broadband x-ray flux and its impact on plasma x-ray heating and ionization, emissivity and opacity, and radiation-hydrodynamics. This problem is relevant to the physics of accretion disks surrounding black holes, x-ray binaries, and active galactic nuclei in astrophysics. In addition, it is also important for understanding non-equilibrium laboratory plasmas driven by a distribution of photons. To this end, and motivated by previous and ongoing gas-cell experiments performed by the PI at the Z facility of Sandia National Laboratories, we developed a new experimental platform at the 1MA Zebra pulsed power accelerator of the University of Nevada, Reno based on using a gas jet produced by a supersonic nozzle. The gas jet is turned into a photoionized plasma driven by the x- ray flux from a wire-array z-pinch. Establishing this new experimental platform at Zebra was a major goal of this project. In addition, we have also dedicated effort to continue complementary experiments at the Z facility using the gas-cell photoionized plasma set up with support from the Fundamental Science Program at Z as well as to perform data processing and analysis, and theory and modeling simulations, including electron kinetics and radiation-hydrodynamics. Since we seek to test and establish what physics models are needed to describe photoionized plasma guided by experimental observation, these complementary experimental efforts were central to achieving the goals of this project.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Assessment of High Gamma Prime Ni-base Superalloy Processability, Geometric Accuracy, and Component Fabricability (CRADA NFE-17-06955 Final Report)

Additive manufacturing (AM), also known as 3D printing, is a rapidly developing technology with tremendous potential in both developmental and production applications. Solar Turbines Incorporated is committed to AM technology for gas turbine applications. The ability to metal 3D print novel designs of turbine blades capable of actual turbine engine operation would effectively reduce design validation cycle time and allow acquisition of key performance data early in a design campaign. In support of Solar’s advanced manufacturing development and ongoing engine efficiency improvement goals, Solar initiated a project to print a full set of Mercury TM 50 stage 2 turbine blades to be run in a development engine, with this Phase 1 program to demonstrate feasibility for fabrication of the geometry from the non-weldable Ni-base superalloy through electron beam melting (EBM).

36 MATERIALS SCIENCE↗

The Cost of Floating Offshore Wind Energy in California Between 2019 and 2032

California’s energy planning is centered around meeting the emissions reduction and renewable energy requirements of Senate Bill 350 by 2030. However, state power system planning is expected to eventually address California’s requirement to achieve 100% of total retail electricity sales from renewable energy and zero-carbon resources by 2045, as mandated by Senate Bill 100. To comply with these directives, California needs to investigate the further development of energy efficiency, storage, and a diverse range of renewable energy, zero-carbon emission, and transmission resources, including offshore wind. Wind resources off the coast of California have the potential to generate a significant portion of the state’s electric energy as it moves toward a zero-carbon economy and can help diversify its energy mix. Floating offshore wind technology, which is suitable for the deep waters along the California coast, is currently in a precommercial phase, with approximately 84 megawatts (MW) installed worldwide at the end of 2019. Globally there are over 7,000 MW in planning and permitting phases of development, with the first commercial-scale projects expected to be operational in 2024. This study provides site-specific cost and performance data for floating offshore wind to inform California’s long-term energy planning. The identification of new resources to meet California’s policy goals at least cost is part of the Integrated Resource Planning (IRP) process, which is coordinated by the California Public Utilities Commission (CPUC). In 2019–2020 IRP modeling, offshore wind was included for the first time as a candidate resource in some sensitivity cases (CPUC 2019). The data and information presented in this report can be used to update offshore wind inputs in future IRP cycles. The authors conducted a geospatial cost analysis over portions of the offshore wind resource area of California. The analyzed spatial domain includes sites with a mean wind speed of at least 7 meters per second and water depths between 40 meters (m) and 1,300 m. Costs and energy production vary across this analysis domain. We calculated these parameters on a grid layout with over 750 sites, with each site representing a 1,000-MW commercial offshore wind power plant. Levelized cost of energy (LCOE) was calculated at each site over the analysis domain. The resulting variation in LCOE across the analysis domain is illustrated through heat maps in this report. Five study areas were selected within the analysis domain where more detailed cost analysis was conducted and cost parameters, such as annual energy production, capital cost expenditures (CapEx), operational cost expenditures (OpEx), and net capacity factors are reported. These five study areas include Morro Bay, Diablo Canyon, Humboldt, Cape Mendocino and Del Norte.

17 WIND ENERGY↗

Effect of High Temperature CO 2 on Haynes 230 Alloy (Updated Jan 2021)

The supercritical carbon dioxide (sCO 2 ) Brayton cycle is a promising candidate for future nuclear reactors due to its ability to improve power cycle energy conversion efficiency. The sCO 2 Brayton cycle can operate with an efficiency of 45-50% at operating temperatures of 550-700 C. One of the greatest hurdles currently faced by sCO 2 Brayton cycles is the corrosivity of sCO 2 and the lack of long-term alloy corrosion and mechanical performance data, as these will be key to enhancing the longevity of the system, and thus the levelized cost of electricity. Past studies have shown that sCO 2 corrosion occurs through the formation of metal carbonates, oxide layers, and carburization, and alloys with Cr, Mo and Ni generally exhibit less corrosion. While stainless steels may offer sufficient corrosion resistance at the lower range of temperatures seen by the sCO 2 Brayton cycles, more expensive nickel-based alloys are typically needed for the higher temperature regions. This study investigates the effects of corrosion on the Haynes 230 alloy, with a preliminary view on changes in the mechanical properties. High temperature CO 2 is used for this study as the corrosion products are similar to that of supercritical CO 2 , allowing for an estimation of the susceptibility towards corrosion without the need for high pressure experimentation.

36 MATERIALS SCIENCE↗

Fuel Economy and Cost Estimates for Medium and Heavy Duty Trucks

The U.S. Department of Energy’s (DOE’s) Vehicle Technologies Office (VTO) and Hydrogen and Fuel Cell Technologies Office (HFTO) aim to develop sustainable, affordable and efficient technologies for transportation of goods and people. These offices seek to advance DOE investments in advanced transportation component technologies and powertrains that translate to the estimated potential vehicle-level fuel savings contained herein. As part of quantifying these benefits, we have been asked to take a three-decades-long view of the fuel-saving vehicle technologies that will likely be implemented in medium- and heavy-duty trucks. In this work, we focus on technologies funded by VTO and HFTO that we expect to see during this time frame. Simulation was carried out for more than 20 types of trucks, ranging from Class 2 (the smallest medium-duty trucks, which span from Class 2b–6) to Class 8 (the largest heavy-duty trucks, which span Classes 7 and 8). The output of this study provides the fuel consumption and estimated purchase prices for trucks that employ advanced technologies, where both types of output offer a vehicle-level perspective and estimated projections about the future of advanced-technology medium- and heavy-duty trucks, as well as cost and performance data pairs that can inform other advanced transportation studies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Cooperative Research and Development Agreement between National Energy Technology Laboratory and Electric Power Research Institute (EPRI) [Abstract]

Carbon dioxide (CO 2 ) capture from flue gas generated by fossil fuel-fired power plants has been proposed as an efficient approach to limit CO 2 emissions to the atmosphere. Due to the high cyclic CO 2 sorption capacity, well-tuned adsorption chemistry and non-volatility, solid sorbents are widely studied for CO 2 capture processes such as pressure swing adsorption (PSA) and temperature swing adsorption (TSA). Realistic applications of traditional solid sorbent systems face many challenges since moisture and heat management are problematic and solid-solid heat exchange is inefficient. Recently, a novel solid sorbent system, the sorbent polymer composite (SPC), has been developed to overcome those challenges in an energy-saving CO 2 capture process using TSA membrane contactors. A SPC material is comprised of a powdered solid sorbent embedded into a hydrophobic and porous polymer matrix. It allows gases to permeate through and achieve full contact with the sorbents while rejecting water moisture in the CO 2 capture process. In this collaborative research, NETL will conduct performance testing of a novel SPC material and EPRI will conduct a cost analysis based on that performance data.

20 FOSSIL-FUELED POWER PLANTS↗

Tailoring EVMS Tools for Projects under $50M

The Earned Value Management System (EVMS) Tailoring Guide for Projects Under $\$$50M is designed for U.S. Department of Energy (DOE) cost-reimbursed projects less than $50M where full EVMS is not required per DOE Order 413.3B but is applicable to all projects below a mandated compliant EVMS requirement. The guide provides an inventory of tools and rules typically used as part of a fully compliant EVMS. The ranking employed in this guide identifies key foundational tools, as well as identifying opportunities for tailoring based upon project size or risk. The goal is to provide guidance for companies to establish enterprise level tools that provide meaningful performance data as efficiently as possible.

99 GENERAL AND MISCELLANEOUS↗

Implementation of Disruptive Designs for Gas Turbine Components Utilizing Additive Manufacturing

Electron beam melting (EBM) is an additive manufacturing process used to print metallic components with complex geometries for aerospace applications. A preheating characteristic enables this technology to avoid large accumulation of residual stress during printing. However, cracking mechanisms particularly in Ni-based superalloys are associated with not only residual stress but also with microstructure (i.e., solidification morphology, transient evolution of γ'). Siemens is committed to AM technology for gas turbine applications. The ability to novel predictive designs of turbine blades would reduce process development time and allow acquisition of key microstructure and performance data early in a design campaign. Siemens initiated a project to establish the design rules for the fabrication of non-printable Nibased superalloys. This phase 1 program demonstrates the feasibility for virtual fabrication of the actual blade geometries through EBM process.

42 ENGINEERING↗

NC State University Industrial Assessment Center. Final Report

This report documents work from the Industrial Assessment Center program at NC State University. The program is funded by the US Department of Energy Advanced Manufacturing Office. The IAC provides energy conservation assessments for small and medium sized manufacturers in NC, SC, and VA. Students are involved in all aspects of the assessment including the on-site visit, interacting with plant personnel, collecting data, performing engineering analyses on potential energy efficiency measures, and producing a technical report for the client.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Full Scale Engine Demonstration of Additively Manufactured High Gamma Prime Turbine Blade

Additive manufacturing (AM), also known as 3D printing, is a rapidly developing technology with tremendous potential in both developmental and production applications. Solar Turbines Incorporated is committed to AM technology development for gas turbine applications. The ability to metal 3D print novel designs of turbine blades capable of actual turbine engine operation would effectively reduce design validation cycle time and allow acquisition of key performance data early in a design campaign. In support of Solar’s advanced manufacturing development and ongoing engine efficiency improvement goals, ORNL and Solar conducted a project to 3D print, machine, inspect, and engine test a full set of Mercury TM 50 stage 2 turbine blades. This full-scale, hot-fired engine demonstration has identified both the capabilities and limitations of the current technologies required to produce turbine hot-section AM components.

36 MATERIALS SCIENCE↗

Advanced Airfoil Cooling Schemes to Increase Efficiency in Gas Turbines for Combined Heat and Power Applications

This report describes a three-year interdisciplinary effort funded by the U.S. Department of Energy’s (DOE) Energy Efficiency and Renewable Energy/Advanced Manufacturing Office (EERE/AMO) to promote market penetration of combined heat and power (CHP) technologies. Prior studies have shown the technical potential for CHP in the United States is much larger than the current deployment of CHP systems. A large portion of the technical potential CHP market aligns with small (<20 MWe) gas turbines. CHP systems are an attractive alternative to reduce greenhouse gas (GHG) emissions. For example, CHP systems can reduce GHG emissions by 30–40% relative to a conventional boiler and power configuration. These GHG emission reductions are “avoided emissions” which means no CO 2 separation or sequestration is required. This report describes an effort to use additive manufacturing (AM) technologies and advanced airfoil cooling designs to increase the turbine inlet temperature by 100 °C for small gas turbines typically used in CHP systems. At the beginning of this effort, baseline performance data for small gas turbines was not available, and the potential benefits of cooling system improvements were not quantified in the available literature.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Verification of Thermodynamic Conservation in the Exero: H2GEN Reactor

The key objective of this project is to conduct an independent analysis of UG’s eXERO technology. Additionally, ORNL will perform 3D multiphysics modelling of the cell to understand and optimize the key operating parameters in generating 99.9+% pure hydrogen. The first objective of this work is to conduct first and second law analysis of the eXERO technology and independently verify the measured performance data, provided by UG.

08 HYDROGEN↗

Building Technologies Office 03.02.02.38 Milestone Report — Technology Options for Low Environmental Impact Air-Conditioning and Refrigeration Systems

Due to increasing concerns about global warming, various environmental regulations will eventually phase out refrigerants used in air conditioning and refrigeration systems (e.g., R-410A, R-404A). Several refrigerants have been proposed as replacements, offering a variety of global warming potential (GWP), levels of energy efficiency and flammability. Some of these options are synthetic HFC/HFO mixtures such as R-454C and R-455A while other are commonly called naturals such as R-290 (Propane) and R-744 (Carbon Dioxide). This study discusses the merits of the leading options for air Conditioning and refrigeration systems. The fundamental requirements (environmental, performance, safety) are employed to fairly evaluate these options. Performance data and Life Cycle analysis results for these options are presented. Overall, this study provides information needed to judge the prospects of getting adequate replacement for R-410A and R-404A in a long-term sustainable basis.

42 ENGINEERING↗

Complete Survey of Fuel Candidates for Microreactor Purposes

This report summarizes various fuel types that may be applicable to several microreactor concepts, which are defined as (1) very high temperature reactors (VHTR), (2) sodium fast reactors (SFR), (3) system for nuclear auxiliary power (SNAP) reactors, (4) gas fast reactors (GFR), and (5) molten salt reactors (MSR). The fuel systems that were assessed include: uranium mononitride (UN), uranium monocarbide (UC), uranium dioxide (UO 2 ), uranium oxycarbide (UCO) Tristructural Isotropic (TRISO), UN TRISO, mixed oxide (MOX), metallic fuels, and metal hydrides. While UCO TRISO has undergone significant testing through the advanced gas reactor (AGR) program, the very high cost necessitates consideration of other fuel types. UN and UC were identified as fuels that should receive further investigation due to their thermophysical and mechanical properties. Minimal irradiation performance data shows that these fuels are good candidate fuels for microreactors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗