Search NASA⌕ Search

SEARCH · Search NASA

Results for “process influence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Visualization of Solid-State Synthesis for Chalcogenide Na Superionic Conductors by in-situ Neutron Diffraction

Chalcogenide superionic sodium (Na) conductors are great potential as solid electrolytes (SEs) in all-solid-state Na batteries with advantages of high energy density and safety, and cost effectiveness. For solid Na-ion conductors, their crystal structures and ionically conductive properties are strongly influenced by the synthetic approaches and processing parameters. Thus, understanding the synthesis process is essential to control the structures and phases and thereby yields to Na-ion conductors with desirable properties. Thanks to the high-flux and deep-penetrating time-of-flight neutron diffraction (ND), we employed in situ experiments to track real-time structural changes of two chalcogenide SEs (Na 3 SbS 4 and Na 3 SbS 3.5 Se 0.5 ) during the solid-state synthesis. For these two conductors, the ND results reveal a fast one-step reaction for the synthesis and the molten process when heating up, and the recrystallization as well as the cubic-to-tetragonal phase transition up on cooling. Moreover, Se-doping is found to influence the reaction temperatures, lattice parameter and structure stability based on neutron experimental observations and theoretical simulation. This work presents a detailed structural study using in situ neutron diffraction technology for the solid synthesis process of chalcogenide Na-ion conductors, beneficial for the design and synthesis of new solid-state conductors.

25 ENERGY STORAGE↗

Optimization of FeSe Superconducting Tapes with Different Sheath Materials and Precursor Powders

FeSe superconducting tapes with different sheath materials of Nb/Cu composite, Ag, and Fe have been fabricated with a traditional in situ powder-in-tube (PIT) process, respectively. With the same cold working process and heat treatment, the influences of different sheath materials on the phase composition and microstructures of FeSe filaments have been analyzed. Due to the reaction between Nb-Se and Ag-Se, Nb{sub 2}Se and Ag{sub 2}Se particles can be clearly observed embedded in the filaments. Therefore, it is necessary to introduce a new method for the fabrication of Ag or Nb sheath FeSe wires in order to avoid the introduction of metal Fe in magnet system during practical applications. Based on our previous study, a high-energy ball milling process has been performed to achieve precursor powders with amorphous FeSe binary compound instead of elemental Se. The formation of Ag-Se compounds has been successfully avoided and the superconducting tapes with high superconducting FeSe critical temperature of 9.0 K have been obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microphysical relationships of clouds observed during March 2000 Cloud IOP at SGP Site and important implications

Cloud droplet size distributions ---- hence the key microphysical quantities of climate importance (e.g., the total droplet concentration, liquid water content, relative dispersion, mean-volume radius, radar reflectivity, and effective radius) are determined by different physical mechanisms such as pre-cloud aerosols, cloud updraft and turbulent entrainment-mixing processes. Therefore, the relationships among these microphysical properties are expected to behave differently in response to aerosols, cloud updrafts and turbulent entrainment-mixing processes. Identifying and quantifying the influences on these microphysical relationships of the various mechanisms is critical for accurately representing cloud microphysics in climate models and for reducing the uncertainty in estimates of aerosol indirect effects. This study first examines the characteristics of the relationships between relative dispersion, droplet concentration, liquid water content, mean-volume radius, effective radius and radar reflectivity calculated from in-situ measurements of cloud droplet size distributions collected during the March 2000 Cloud IOP at the SGP site. The relationships are further analyzed to dissect the effects from different mechanisms/factors (aerosols, updraft, and different turbulent entrainment-mixing processes). Potential applications to improve radar retrievals of cloud properties will be explored as well.

54 ENVIRONMENTAL SCIENCES↗

Optimization of nutrient utilization efficiency and productivity for algal cultures under light and dark cycles using genome-scale model process control

Abstract Algal cultivations are strongly influenced by light and dark cycles. In this study, genome-scale metabolic models were applied to optimize nutrient supply during alternating light and dark cycles of Chlorella vulgaris . This approach lowered the glucose requirement by 75% and nitrate requirement by 23%, respectively, while maintaining high final biomass densities that were more than 80% of glucose-fed heterotrophic culture. Furthermore, by strictly controlling glucose feeding during the alternating cycles based on model-input, yields of biomass, lutein, and fatty acids per gram of glucose were more than threefold higher with cycling compared to heterotrophic cultivation. Next, the model was incorporated into open-loop and closed-loop control systems and compared with traditional fed-batch systems. Closed-loop systems which incorporated a feed-optimizing algorithm increased biomass yield on glucose more than twofold compared to standard fed-batch cultures for cycling cultures. Finally, the performance was compared to conventional proportional-integral-derivative (PID) controllers. Both simulation and experimental results exhibited superior performance for genome-scale model process control (GMPC) compared to traditional PID systems, reducing the overall measured value and setpoint error by 80% over 8 h. Overall, this approach provides researchers with the capability to enhance nutrient utilization and productivity of cell factories systematically by combining genome-scale models and controllers into an integrated platform with superior performance to conventional fed-batch and PID methodologies.

59 BASIC BIOLOGICAL SCIENCES↗

Chemical weathering on Mars - Thermodynamic stabilities of primary minerals /and their alteration products/ from mafic igneous rocks

Chemical weathering on Mars is examined theoretically from the standpoint of thermodynamic equilibrium between primary rock-forming minerals and the atmospheric gases O2, H2O, and CO2. The primary minerals considered are those common to mafic igneous rocks and include olivine, pyroxene, plagioclase, magnetite, troilite, pyrrhotite, and apatite. The importance of kinetics and reaction mechanisms in controlling possible weathering processes on Mars is discussed within the limits of currently available data, and the possible influence of liquid water on Martian weathering processes is evaluated where appropriate. For gas-solid weathering of mafic igneous rocks at the Martian surface, it is concluded that upon attainment of thermodynamic equilibrium: (1) oxides and carbonates should dominate the mineral assemblage of weathering products; (2) hematite rather than goethite should be the stable mineral form of Fe (III); (3) FeSO4 or FeSO4.H2O could be the stable weathering product of iron sulfides in the absence of liquid water; and (4) kaolinite is apparently the only clay mineral that should be thermodynamically stable over all ranges of temperature and water-vapor abundance at the Martian surface.

Gooding, J. L.↗

Impacts of annealing treatment on the microstructure of U-Mo monolithic fuel plates

The objective of this paper is to analyze the effect of different heat treatments on the fuel microstructure and texture in laboratory scale monolithic U-Mo fuel plates. Such analyses are relevant as they could possibly inform future fabrication methods for the optimization of microstructure and of material properties to ultimately improve fuel performance during irradiation. For this reason, detail characterization including Energy x-ray dispersive spectroscopy (EDS) and electron backscattered diffraction (EBSD) techniques were applied on U-Mo plates fabricated with different heat treatments to understand the influence of fabrication on fuel microstructure. Here, U-Mo fresh fuel specimens with or without annealing treatments (homogenization and stress release annealing) after rolling were analyzed in this work. In this study for the first time EBSD was systematically used to analyze the heat treatments influence on texture present in fresh fuel monolithic U-Mo fuel plates. Such changes were connected to other known microstructural and chemical changes. In this work minimization of molybdenum concentration variation and gamma phase decomposition of the U-Mo fuel core after homogenization was observed. Also, an increase in the interaction layer of the U-Mo fuel core with the Zr interlayer diffusion barrier was observed with the UZr 2 growing up to 1 µm in thickness. Such microstructural changes were aligned to the changes in texture and grain structure. Indeed, common texture observed in body-centered cubic (BCC) metal after cold rolling (e.g., α, ξ, γ fibers) were minimized by the annealing/homogenization process. Moreover, grain structure was influenced by the fabrication route with elongated grains formed in the rolled sample and equiaxed grains found after annealing. Such features are relevant since the formation of microstructural features formed during fuel fabrication can impact fuel performance in reactor.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Environmental fatigue of an Al-Li-Cu alloy. Part 2: Microscopic hydrogen cracking processes

Based on a fractographic analysis of fatigue crack propagation (FCP) in Al-Li-Cu alloy 2090 stressed in a variety of inert and embrittling environments, microscopic crack paths are identified and correlated with intrinsic da/dN-delta K kinetics. FCP rates in 2090 are accelerated by hydrogen producing environments (pure water vapor, moist air, and aqueous NaCl), as defined in Part 1. For these cases, subgrain boundary fatigue cracking (SGC) dominates for delta K values where the crack tip process zone, a significant fraction of the cyclic plastic zone, is sufficiently large to envelop 5 micron subgrains in the unrecrystallized microstructure. SGC may be due to strong hydrogen trapping at T1 precipitates concentrated at sub-boundaries. At low delta K, the plastic zone diameter is smaller than the subgrain size and FCP progresses along (100) planes due to either local lattice decohesion or aluminum-lithium hydride cracking. For inert environments (vacuum, helium, and oxygen), or at high delta K where the hydrogen effect on da/dN is small, FCP is along (111) slip planes; this mode does not transition with increasing delta K and plastic zone size. The SGC and (100) crystallographic cracking modes, and the governing influence of the crack tip process zone volume (delta K), support hydrogen embrittlement rather than a surface film rupture and anodic dissolution mechanism for environmental FCP. Multi-sloped log da/dN-log delta K behavior is produced by changes in process zone hydrogen-microstructure interactions, and not by purely micromechanical-microstructure interactions, in contradiction to microstructural distance-based fatigue models.

Robert S Piascik↗

A Study on the Surface Composition and Migration of Materials and Their Effect on Surface Microhardness during Micro-EDM of Ti-6Al-4V

This study aims to investigate the effect of machining parameters on the surface topography and composition of Ti-6Al-4V after micro-EDM as well as the effect of elemental composition on the surface microhardness. The surface topography has been studied in terms of quality of machined surface, crater sizes, and the presence of surface defects. Statistical analysis was carried out to study the influence of micro-EDM process parameters, i.e., voltage, capacitance, discharge energy, electrode rotational speed, and the electrode coating, on the elemental composition of the machined surface. It was found that the crater size, and hence the surface finish, was dependent on the electrical parameters only, with more pronounced effect of capacitance over voltage. The 60 V and 30 pF combination resulted in crater size as small as 1 µm, whereas crater size of 12 µm was obtained using a combination of 4700 pF and 112 V. Although smaller capacitance resulted in smaller crater sizes, it also increased the chances of defects or deposition of debris on the machined surface. There was migration of material from the tool electrode, dielectric oil, and atmosphere to the workpiece surface, which influenced the surface topography, crater sizes, and surface microhardness. The effects of non-electrical parameters on the relative percentage of various elements were found to be statistically insignificant. The surface microhardness was found to increase slightly due to the surface modification after EDM. The reason for increase in surface microhardness was identified as the migration of tungsten from the tool electrode and carbon from the dielectric. The maximum surface microhardness of 455 HV was obtained at a surface composition after micro-EDM containing 7.96% C and 9.69% W, where non-machined Ti-6Al-4V surface does not have any carbon or tungsten on the surface.

36 MATERIALS SCIENCE↗

Modification of near-wall coherent structures by inertial particles

Direct numerical simulations are combined with two-way coupled Lagrangian point particles to study the effect of Reynolds number on particle-turbulence interaction. Turbulent planar Couette flow is simulated at a constant dispersed phase mass loading of ϕ{sub m} = 0.25 for particle Stokes numbers of St{sub K} = [O(1), O(10), O(100)] (based on the Stokes time scale of the particle and the Kolmogorov time scale of the flow) and bulk Reynolds numbers of Re{sub b} = [8100, 24000, 72000] (based on the plate velocity difference and separation distance). Statistics of swirling strength |λ{sub ci}| are used to evaluate the impact of particles on near-wall motions which are responsible for turbulent, wall-normal momentum transport. Instantaneously, the number of high-strength swirling motions near the wall decreases significantly in the presence of particles, and this trend is enhanced with increasing Re{sub b}. Conditional averages are computed using linear stochastic estimation, providing the average structures responsible for ejection events near the wall. These conditional eddies are weakened substantially by the presence of the dispersed phase, and this effect is again enhanced with increasing Re{sub b}. We propose a mechanism where particles, by interfering with the hairpin regeneration process near the wall, can influence turbulent fluxes in a way that increases with Re{sub b} despite only having direct interaction with scales on the same order as their small physical size. At the same time, turbulent momentum flux concentrated at higher wavenumbers with increasing Re{sub b} allows small particles to be effective agents for altering turbulent transport.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterization of novel BaZnSnO thin films by solution process and applications in thin film transistors

Graphical abstract: This work reports the Ba content on thin film transistor based on a novel BaZnSnO semiconductor using solution process. - Highlights: • No reports about BaZnSnO thin film using solution process. • BaZnSnO thin film transistor (TFT) was firstly fabricated. • BaZnSnO-TFT shows a acceptable performace. • Influence of Ba content on BaZnSnO-TFT. - Abstract: A novel BaZnSnO semiconductor is fabricated using solution process and the influence of Ba addition on the structure, the chemical state of oxygen and electrical performance of BaZnSnO thin films are investigated. A high performance BaZnSnO-based thin film transistor with 15 mol% Ba is obtained, showing a saturation mobility of 1.94 cm{sup 2}/V s, a threshold voltage of 3.6 V, an on/off current ratio of 6.2 × 10{sup 6}, a subthreshold swing of 0.94 V/decade, and a good bias stability. Transistors with solution processed BaZnSnO films are promising candidates for the development of future large-area, low-cost and high-performance electronic devices.

36 MATERIALS SCIENCE↗

Linking RESRAD-OFFSITE and HYDROGEOCHEM Model for Performance Assessment of Low-Level Radioactive Waste Disposal Facility - 13429

Performance assessments are crucial steps for the long-term radiological safety requirements of low-level waste (LLW) disposal facility. How much concentration of radionuclides released from the near-field to biosphere and what radiation exposure levels of an individual can influence on the satisfactory performance of the LLW disposal facility and safety disposal environment. Performance assessment methodology for the radioactive waste disposal consists of the reactive transport modeling of safety-concerned radionuclides released from the near-field to the far-field, and the potential exposure pathways and the movements of radionuclides through the geosphere, biosphere and man of which the accompanying dose. Therefore, the integration of hydrogeochemical transport model and dose assessment code, HYDROGEOCHEM code and RESRAD family of codes is imperative. The RESRAD family of codes such as RESRAD-OFFSITE computer code can evaluate the radiological dose and excess cancer risk to an individual who is exposed while located within or outside the area of initial (primary) contamination. The HYDROGEOCHEM is a 3-D numerical model of fluid flow, thermal, hydrologic transport, and biogeochemical kinetic and equilibrium reactions in saturated and unsaturated media. The HYDROGEOCHEM model can also simulate the crucial geochemical mechanism, such as the effect of redox processes on the adsorption/desorption, hydrogeochemical influences on concrete degradation, adsorption/desorption of radionuclides (i.e., surface complexation model) between solid and liquid phase in geochemically dynamic environments. To investigate the safety assessment of LLW disposal facility, linking RESRAD-OFFSITE and HYDROGEOCHEM model can provide detailed tools of confidence in the protectiveness of the human health and environmental impact for safety assessment of LLW disposal facility. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A Model of the Influence of Neutral Air Dynamics on the Seasonal Variation in the Low Ionosphere

Recently it has become clear that the phenomena in the ionospheric D-region are determined to a great extent by dynamical processes in the strato-mesosphere D-region. In this respect much attention is paid to the study of the winter anomaly (WA) phenomenon on medium and short radiowaves, in which the meteorological character of the lower ionosphere is most prominent. Significant experimental data about the variations of the electron concentration, N, ion composition, temperature and dynamic regime during WA permit a better understanding of the character of the physical processes in the middle atmosphere. The influence of the neutral wind on the seasonal variation of the electron concentration N for the altitude interval 90 or = z or = 120 km, where the ratio upsilon sub in/omega sub i, of the ion-neutral collision frequency, upsilon sub in and the ion gyrofrequency, omega sub i decreases from 40 to 1 was evaluated. CIRA-72 is used as a model of the zonal wind.

Nestorov, G.↗

High-salinity brine desalination with amine-based temperature swing solvent extraction: A molecular dynamics study

Solvent extraction desalination (SED) is a promising technique for efficiently treating high salinity brines. However, only a few studies in the literature have investigated the influence of the molecular characteristics of the organic solvents on the emergent performance of the separation process. Thus, in this work we investigate the influence of the molecular structure of four different secondary amines on the desalination process of a concentrated aqueous solution of NaCl. Molecular dynamics simulations and free energy calculations are used to obtain the thermodynamic and structural properties of the pure solvent bulk phase, as well as a homogeneous solvent-water bulk mixture. Furthermore, solvent-water and solvent-brine interfacial systems are used to explicitly analyze the water partitioning behavior in the relevant temperature range for SED. The water solubilization in these secondary amines is found to be an exothermic process. Additionally, although the hydrogen-bonding interaction between the water and solvent molecules are beneficial, this interaction is not necessarily the dominant factor for ranking the water solubility performance of the different solvents. Finally, the excess volume of mixing of the bulk solvent-water mixture, as well as the electrostatic surface features of the solvents are also found to provide important clues for screening solvent behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A statistical approach to screening isotopic signatures in monitoring for underground nuclear explosions

The ability to differentiate between atmospheric radionuclide signatures from underground nuclear explosions (UNEs) and signals from other sources, such as medical isotope-production facilities and nuclear reactors, can be critical to the detection and monitoring of unannounced, low-yield nuclear events. Signatures having anomalously high amplitudes, compared to background levels, remain the best indicator in screening for a UNE. However, isotopic composition can further validate a suspected UNE signature, but separation from any atmospheric background composition is first necessary. To date, evaluating the challenges of performing this separation has typically involved comparing an observed background with a highly idealized deterministic model of radioxenon signature production by a UNE that does not consider the influence of post-detonation chemical/physical processes in the detonation cavity or the subsequent gas transport mechanisms that can also affect the isotopic composition of the detected gas signature. In addition, purely deterministic models, as previously employed, overlook the uncertainty inherent in estimating critical parameters characterizing the UNE and its detonation environment. In this paper, we create detailed, multi-parameter models of radionuclide evolution using the widely accepted England and Rider post-detonation radionuclide decay-chain network coupled to detailed models simulating physical production and transport processes affecting the gas signature. Because these models are governed by uncertain parameters including barometric fluctuations, realistic ranges of variation for each of the parameters influencing isotopic composition are then defined. A Latin-Hypercube sampling approach is used to obtain a random distribution of isotopic production and gas transport results associated with a given value of each parameter. We apply these results to background histories of two stations, one providing 4-isotope background measurements and the other providing two-isotope measurements associated with the 2013 DPRK announced UNE.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Desolvation Processes in Channel Solvates of Niclosamide

The antiparasitic drug niclosamide (NCL) is notable for its ability to crystallize in multiple 1:1 channel solvate forms, none of which are isostructural. Here, using a combination of time-resolved synchrotron powder X-ray diffraction and thermogravimetry, the process-induced desolvation mechanisms of methanol and acetonitrile solvates are investigated. Structural changes in both solvates follow a complicated molecular-level trajectory characterized by a sudden shift in lattice parameters several degrees below the temperature where the desolvated phase first appears. Model fitting of kinetic data obtained under isothermal heating conditions suggests that the desolvation is rate-limited by the nucleation of the solvent-free product. The desolvation pathways identified in these systems stand in contrast to previous investigations of the NCL channel hydrate, where water loss by diffusion initially yields an anhydrous isomorph that converts to the thermodynamic polymorph at significantly higher temperatures. Taking the view that each solvate lattice is a unique “pre-organized” precursor, a comparison of the pathways from different starting topologies to the same final product provides the opportunity to reevaluate assumptions of how various factors (e.g., solvent binding strength, density) influence solid-state desolvation processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗