SEARCH · Search NASA
Results for “refinement”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Structural and compositional investigations of Zr{sub 4}Pt{sub 2}O: A filled-cubic Ti{sub 2}Ni-type phase
Syntheses, structural and compositional analyses of the filled cubic Ti{sub 2}Ni-type phase in Zr-Pt-O system have been studied, largely for the platinum-richer compositions. Diffraction quality crystals were grown by annealing an arc-melted composition Zr{sub 4}Pt{sub 2}O{sub 0.66} at 1600 deg. C under Ar. The refined composition Zr{sub 4.0}Pt{sub 1.95(1)}O{sub 0.93(6)} (a=12.5063(6) A, Fd3-barm, Z=16) is close to the idealized composition Zr{sub 4}Pt{sub 2}O known in several other Zr-T-O systems (T=late 4d or 5d transition element). (This composition has been erroneously reported by ICDD for years as Zr{sub 6}Pt{sub 3}O (No. 00-017-0557) and referred to as epsilon-Zr{sub 6}Pt{sub 3}O.) The product is only marginally poor in platinum and oxygen, in contrast to the 1960 reports of metallographic studies ({approx}Zr{sub 4}Pt{sub 1.62}O{sub 0.44}). Under arc-melting conditions, high yields of the cubic phase are obtained from samples with lower platinum concentrations (Zr{sub 4}Pt{sub 1.74}O{sub 1.04}), whereas samples near the refined cubic composition contain hexagonal Zr{sub 5}Pt{sub 3}O{sub x} as well (Mn{sub 5}Si{sub 3}-type). The hexagonal structure of binary Zr{sub 5}Pt{sub 3} was also refined (Mn{sub 5}Si{sub 3} type, P6{sub 3}/mcm, a=8.210(1) A, c=5.385(2) A) and shown to be non-stoichiometric to at least Zr{sub 5}Pt{sub 2.5}. - Graphical abstract: The figure shows the environments of three atom types in the corrected structure, an oxygen-stuffed Ti{sub 2}Ni type.
Structural characterization of C-S-H and C-A-S-H samples-Part I: Long-range order investigated by Rietveld analyses
Rietveld analyses on samples belonging to C-S-H and C-A-S-H series (0.8<=C/S<=1.7) were realized on X-ray powder patterns. The tobermorite M model was successfully used to refine all the powder patterns from C-S-H samples whatever the C/S value. This gives clear indication on the steady change in a unique structural description, corresponding to a 'tobermorite M defect' model, when passing from C-S-H(I) (C/S<1.0) to C-S-H(II) type (C/S>1.0). The possibility for both C-S-H types (from polymerized silicate chains to isolated silicate dimers) to accommodate the same structural model is explained by the continuous evolution of the occupancies of the cationic sites: the interlayer Ca atoms, the Si atoms from paired and bridging silicates. Accurate refinements of the structural and microstructural parameters evidenced the well crystallized feature of C-S-H phase combined with a small coherent domain size. Insertion of Al atoms in the C-S-H structure (C-A-S-H phase) involves a clear disruption into the layered atomic framework. The large increase of layer spacing observed when incorporating aluminum into C-S-H indicates that Al atoms should be located in the interlayer region of the structure in new crystallographic sites. Aluminum atoms are not substituted silicon crystallographic sites or interlayer calcium crystallographic sites. - Graphical abstract: The Tobermorite M model has been successfully used to perform Rietveld analyses on X-ray powder patterns from C-S-H samples. Refinement of the cationic site occupancies explains the evolution from the linear silicate chains to the isolated silicate dimers when increasing the C/S ratio.
New bismuth calcium oxysilicate with apatite structure: Synthesis and structural characterization
New bismuth calcium silicon oxide Ca{sub 4}Bi{sub 4.3}(SiO{sub 4})(HSiO{sub 4}){sub 5}O{sub 0.95}, with apatite structure has been synthesized. The structure was refined from powder X-ray diffraction data. The refinement revealed that the phase has P6{sub 3}/m (176) space group with unit cell parameters a=b=9.6090(7) A, c=7.0521(7) A, V=563.9 A{sup 3} and c/a=0.734. The R{sub wp} factor at Rietveld refinement was equal to 0.082. The synthesized phase has an unusual quantity of cation vacancies in a crystal lattice. Mechanisms of compensation of the excess charge of a lattice are considered and checked experimentally using the FT-IR spectroscopy, the thermal analysis and the XPS analysis. - Graphical abstract: The fragment Ca{sub 4}Bi{sub 4.3}(SiO{sub 4})(HSiO{sub 4}){sub 5}O{sub 0.95} structure along c-axis in polygonal mode.
Neutron diffraction study and superparamagnetic behavior of ZnFe{sub 2}O{sub 4} nanoparticles obtained with different conditions
Spinel-type (S.G.= Fd3-bar m) ZnFe{sub 2}O{sub 4} fine particles with sizes from 4 to 19 nm prepared by solvothermal and microwave-assisted solvothermal methods have been studied by neutron powder diffraction at room temperature. The cation distribution corresponding to mixed spinel structure (Zn{sup 2+}{sub 1-x}Fe{sup 3+}{sub x})[Fe{sup 3+}{sub 2-x}Zn{sup 2+}{sub x}]O{sub 4} along with the unit cell parameter has been estimated after Rietveld refinement of the obtained neutron diffraction data for all the samples. It has been found that the inversion degree parameter (x) takes values between 0.11 and 0.20 depending not only on the particle size but also on the synthesis conditions as well. All the samples behave as superparamagnetic with an effective magnetic moment per particle ({mu}{sub SP}) from 7.0x10{sup 2} to 7.7x10{sup 3} {mu}{sub B}. The sample obtained by microwave assistance displays a different magnetic behavior as the ZFC and FC magnetic susceptibility and the magnetization versus applied field hysteresis loop measured at 5 K suggest. This is related with the dipole interactions that are a consequence of the higher inversion degree and {mu}{sub SP}. - Graphical abstract: ZnFe{sub 2}O{sub 4} nanoparticles of 19 nm obtained by the solvotermal method together with its Rietveld refined pattern. Highlights: > Solvothermally prepared ZnFe{sub 2}O{sub 4} nanoparticles.{yields} Inversion degree obtained after Rietveld refinement of neutron data.{yields} Superparamagnetic behavior.{yields} Dependence with the synthesis conditions.
Chloride substitution in sodium borohydride
The dissolution of sodium chloride and sodium borohydride into each other resulting in formation of solid solutions of composition Na(BH{sub 4}){sub 1-x}Cl{sub x} is studied. The dissolution reaction is facilitated by two methods: ball milling or combination of ball milling and annealing at 300 deg. C for three days of NaBH{sub 4}-NaCl samples in molar ratios of 0.5:0.5 and 0.75:0.25. The degree of dissolution is studied by Rietveld refinement of synchrotron radiation powder X-ray diffraction (SR-PXD) data. The results show that dissolution of 10 mol% NaCl into NaBH{sub 4}, forming Na(BH{sub 4}){sub 0.9}Cl{sub 0.1}, takes place during ball milling. A higher degree of dissolution of NaCl in NaBH{sub 4} is obtained by annealing resulting in solid solutions containing up to 57 mol% NaCl, i.e. Na(BH{sub 4}){sub 0.43}Cl{sub 0.57}. In addition, annealing results in dissolution of 10-20 mol% NaBH{sub 4} into NaCl. The mechanism of the dissolution during annealing and the decomposition pathway of the solid solutions are studied by in situ SR-PXD. Furthermore, the stability upon hydrogen release and uptake were studied by Sieverts measurements. - Graphical Abstract: Dissolution of sodium chloride and sodium borohydride into each other resulting in formation of solid solutions of composition Na(BH{sub 4}){sub 1-x}Cl{sub x} is studied. Dissolution is facilitated by two methods: ball milling or annealing at 300 deg. C for three days of NaBH{sub 4}-NaCl samples. Sample compositions and dissolution mechanism are studied by Rietveld refinement of synchrotron radiation powder X-ray diffraction data. Highlights: > Studies of dissolution of sodium chloride and sodium borohydride into each other. > Solid state diffusion facilitated by mechanical and thermal treatments. > Dissolution is more efficiently induced by heating than by mechanical treatment. > Mechanism for dissolution studied by Rietveld refinement of in situ SR-PXD data.
The crystal structure of Yb{sub 2}(SO{sub 4}){sub 3}.3H{sub 2}O and its decomposition product, {beta}-Yb{sub 2}(SO{sub 4}){sub 3}
Yb{sub 2}(SO{sub 4}){sub 3}.3H{sub 2}O, synthesised by hydrothermal methods at 220(2) deg. C, has been investigated by single crystal X-ray diffraction. Yb{sub 2}(SO{sub 4}){sub 3}.3H{sub 2}O crystallises in space group Cmc2{sub 1} and is isostructural with Lu{sub 2}(SO{sub 4}){sub 3}.3H{sub 2}O. The crystal structure has been refined to R{sub 1}=0.0145 for 3412 reflections [F{sub o}>3{sigma}(F)], and 0.0150 for all 3472 reflections. The structure of Yb{sub 2}(SO{sub 4}){sub 3}.3H{sub 2}O is a complex framework of YbO{sub 6} octahedra, YbO{sub 8} and YbO{sub 5}(H{sub 2}O){sub 3} polyhedra and SO{sub 4} tetrahedra. Thermal data shows that Yb{sub 2}(SO{sub 4}){sub 3}.3H{sub 2}O decomposes between 120 and 190 deg. C to form {beta}-Yb{sub 2}(SO{sub 4}){sub 3}. The structure of a twinned crystal of {beta}-Yb{sub 2}(SO{sub 4}){sub 3} was solved and refined using an amplimode refinement in R3c with an R{sub 1}=0.0755 for 8944 reflections [F{sub o}>3{sigma}(F)], and 0.1483 for all 16,361 reflections. {beta}-Yb{sub 2}(SO{sub 4}){sub 3} has a unique structural topology based on a 3D network of pinwheels. - Graphical abstract: Octahedral-tetrahedral linkages found in Y{sub 2}(SO{sub 4}){sub 3} [and Er{sub 2}(SO{sub 4}){sub 3}] and ss-Yb{sub 2}(SO{sub 4}){sub 3}. Highlights: > The crystal structure and decomposition reactions of Yb{sub 2}(SO{sub 4}){sub 3}.3H{sub 2}O. > The crystal structure of a twinned crystal of {beta}-Yb{sub 2}(SO{sub 4}){sub 3}. > Comparison of the structures of {beta}-Yb{sub 2}(SO{sub 4}){sub 3} and Y{sub 2}(SO{sub 4}){sub 3}.
Hydrogen atom distribution and hydrogen induced site depopulation for the La{sub 2-x}Mg{sub x}Ni{sub 7}-H system
La{sub 2-x}Mg{sub x}Ni{sub 7} and its hydrides/deuterides were investigated by high resolution synchrotron powder X-ray and neutron diffraction. Upon deuteration the single phase sample of the intermetallic compound with the refined composition La{sub 1.63}Mg{sub 0.37}Ni{sub 7} (space group: P6{sub 3}/mmc) expands isotropically, in contrast to the Mg free phase. The hydrogen uptake, {approx}9 D/f.u., is higher than in La{sub 2}Ni{sub 7}D{sub 6.5}. The refined composition accounts for La{sub 1.63}Mg{sub 0.37}Ni{sub 7}D{sub 8.8} (beta-phase). Rietveld refinements using the neutron and synchrotron diffraction data suggest that deuterium atoms occupy 5 different interstitial sites within both AB{sub 2} and AB{sub 5} slabs, either in an ordered or a disordered way. All determined D sites have an occupancy >50% and the shortest D-D contact is 1.96(3) A. It is supposed that a competition between the tendency to form directional bonds and repulsive D-D (H-H) interactions is the most important factor that influences the distribution of deuterium atoms in this structure. A hitherto unknown second, alpha-phase with composition La{sub 1.63}Mg{sub 0.37}Ni{sub 7}D{sub 0.56}, crystallizing with the same hexagonal symmetry as La{sub 1.63}Mg{sub 0.37}Ni{sub 7}D{sub 8.8}, has been discovered. The unit cell parameters for this D-poor phase differ slightly from those of the intermetallic. Alpha-phase displays only one D site (4f, space group: P6{sub 3}/mmc) occupied >50%, which is not populated in the D-rich beta-phase. This hydrogen/deuterium induced site depopulation can be explained by repulsive D-D (H-H) interactions that are likely to influence non-occupancy of certain interstices in metal lattice when absorbing hydrogen. - Graphical abstract: The detailed D atoms arrangement in La{sub 1.63}Mg{sub 0.37}Ni{sub 7}D{sub 8.8} differs significantly from the previously reported La{sub 1.5}Mg{sub 0.5}Ni{sub 7}D{sub 8.9(9.1)}. The present model consists of only five deuterium sites as opposed to nine proposed for La{sub 1.5}Mg{sub 0.5}Ni{sub 7}D{sub 8.9(9.1)}. The reported four remaining deuterium atom positions in La{sub 1.5}Mg{sub 0.5}Ni{sub 7}D{sub 8.9(9.1)} were not found in the investigated La{sub 1.63}Mg{sub 0.37}Ni{sub 7}D{sub 8.8}. The five Ni atoms have deuterium among their nearest neighbors, which surround them in a way similar to configurations observed in some complex transition metal hydrides and already reported for metallic hydrides. In the presented deuterium-rich phase, deformed tetrahedron, rigid trigonal pyramids as well as disordered and deformed saddle-like configuration are observed. Highlights: Black-Right-Pointing-Pointer Alpha- and beta-phase for La{sub 2-x}Mg{sub x}Ni{sub 7}-H system have been characterized. Black-Right-Pointing-Pointer Five different interstitial sites are occupied by deuterium/hydrogen atoms in the beta-phase. Black-Right-Pointing-Pointer One D/H site has been determined in the alpha-phase. Black-Right-Pointing-Pointer Deuterium/hydrogen induced site depopulation during phase transformation is observed. Black-Right-Pointing-Pointer Ni atoms tend to have tetrahedral-like D/H atom coordination.
Effect of Cu{sup 2+} and Ni{sup 2+} substitution at the Mn site in (La{sub 0.63}Ca{sub 0.37})MnO{sub 3}: A neutron powder diffraction investigation
The crystal and magnetic structures of the (La{sub 0.63}Ca{sub 0.37})(Mn{sub 1−x}TM{sub x})O{sub 3} compounds (x=0.00, 0.03, 0.08; TM=Cu{sup 2+}, Ni{sup 2+}) were investigated between 5 K and 300 K by means of dc magnetic measurements and neutron powder diffraction analysis followed by Rietveld refinement. Both substituting cations lead to a reduction of the long range ferromagnetic ordering temperature; ferromagnetism is strongly suppressed in the 8% Cu-substituted sample, where long- and short-range FM magnetic orders coexist together with short-range A-type AFM order. This particular feature can be related to the Jahn–Teller character of Cu{sup 2+}, absent in Ni{sup 2+}, and suggests the occurrence of a quantum critical point in the (La{sub 0.63}Ca{sub 0.37})(Mn{sub 1−x}Cu{sub x})O{sub 3} system. - Graphical abstract: Rietveld refinement plot of (La{sub 0.63}Ca{sub 0.37})(Mn{sub 0.92}Cu{sub 0.08})O{sub 3} showing in the inset the coexistence of broad A-type AFM peaks with FM ones. Highlights: ► (La{sub 0.63}Ca{sub 0.37})MnO{sub 3} was substituted with Ni and Cu. ► Neutron powder diffraction and Rietveld refinement were carried out. ► A quantum critical point possibly occurs in the (La{sub 0.63}Ca{sub 0.37})(Mn{sub 1−x}Cu{sub x})O{sub 3} system.
A new member of “114” family Ca{sub 1−x}Eu{sub x}BaZn{sub 2+x}Ga{sub 2−x}O{sub 7} (x≤0.24): Structure and luminescence
New “114” oxides Ca{sub 1−x}Eu{sub x}BaZn{sub 2+x}Ga{sub 2−x}O{sub 7} (x≤0.24) were synthesized by solid state reaction. Rietveld refinements were performed on high quality powder XRD data in the space group P6{sub 3}mc. Zn{sup 2+} and Ga{sup 3+} co-occupy T1 and T2 positions, which are both in tetrahedral coordinated environment. Comparing the host compound, O3 moves towards T2 cation as much as 0.08 Å when x=0.24. It is the most observable structural change during the substitution. By comparing the structures of CaBaZn{sub 2}Ga{sub 2}O{sub 7} (P6{sub 3}mc) and CaBaCo{sub 4}O{sub 7} (Pbn2{sub 1}), we find that smaller cations in tetrahedral sites would lead to a lower symmetry in “114” oxides. Luminescent spectra show the noncentrosymmetric coordination of Eu{sup 3+}, and the f–f excitations are comparable to CT-excitation. No concentration quenching was observed up to x=0.24. The optical band gaps were estimated to be 3.8 eV for Ca{sub 1−x}Eu{sub x}BaZn{sub 2+x}Ga{sub 2−x}O{sub 7} (x=0, 0.16). - Graphical abstract: Reitveld refinements show Ca{sub 1−x}Eu{sub x}BaZn{sub 2+x}Ga{sub 2−x}O{sub 7} all crystallize in P6{sub 3}mc. By Eu{sup 3+}-doping, O3 show the most obvious movement (∼0.08 Å) along the c-axis. Display Omitted - Highlights: • Ca{sub 1−x}Eu{sub x}BaZn{sub 2+x}Ga{sub 2−x}O{sub 7} (x≤0.24) solid solutions were synthesized in air. • Rietveld refinements of high quality powder XRD show good convergences. • Ca{sub 1−x}Eu{sub x}BaZn{sub 2+x}Ga{sub 2−x}O{sub 7} all crystallize in the space group P6{sub 3}mc. • Luminescent spectra of Eu{sup 3+} show no quenching effect up to x=0.24. • Optical band gaps for CaBaZn{sub 2}Ga{sub 2}O{sub 7} are estimated to be 3.8 eV.
Incorporation of uranium in pyrochlore oxides and pressure-induced phase transitions
Abstract not provided
Structure of β-AgGaO{sub 2}; ternary I–III–VI{sub 2} oxide semiconductor with a wurtzite-derived structure
The structure of the wurtzite-derived β-AgGaO{sub 2} was refined by Rietveld analysis of high-resolution powder diffraction data obtained using synchrotron X-ray radiation. The space group of the crystal is Pna2{sub 1} with lattice parameters of a{sub 0}=5.56175 Å, b{sub 0}=7.14749 Å, and c{sub 0}=5.46875 Å. The deviation of O–Ag–O and M–O–M bond angles from the regular tetrahedral angle of 109.5° was very large at ∼8° and ∼11°, respectively. The electronic structure of β-AgGaO{sub 2} is discussed based on its structure, and the indirect band gap of β-AgGaO{sub 2} was related to significant tetrahedral distortion. Although β-AgGaO{sub 2} decomposes into metallic silver and Ga{sub 2}O{sub 3} at a high temperature in any atmosphere, β-AgGaO{sub 2} is stable up to 690 °C under an O{sub 2} atmosphere. No direct transformation from the wurtzite-derived phase to a delafossite phase occurs in β-AgGaO{sub 2}. - Graphical abstract: Crystal structure of β-AgGaO{sub 2} was refined by Rietveld analysis. AgO{sub 4} and O(Ag,Ga){sub 4} tetrahedra are significantly distorted from ideal tetrahedron. - Highlights: • Orthorhombic β-AgGaO{sub 2} with a wurtzite-derived β-NaFeO{sub 2} structure was synthesized. • Its structure was refined by Rietveld analysis of high-resolution XRD data. • Silver and oxygen tetrahedra are significantly distorted from an ideal tetrahedron. • The extent of this tetrahedral distortion is related to the band gap nature. • β-AgGaO{sub 2} is a metastable phase but is stable up to 690 °C in an O{sub 2} atmosphere.
Microwave sol–gel synthesis and upconversion photoluminescence properties of CaGd{sub 2}(WO{sub 4}){sub 4}:Er{sup 3+}/Yb{sup 3+} phosphors with incommensurately modulated structure
CaGd{sub 2−x}(WO{sub 4}){sub 4}:Er{sup 3+}/Yb{sup 3+} phosphors with the doping concentrations of Er{sup 3+} and Yb{sup 3+} (x=Er{sup 3+}+Yb{sup 3+}, Er{sup 3+}=0.05, 0.1, 0.2 and Yb{sup 3+}=0.2, 0.45) have been successfully synthesized by the microwave sol–gel method. The crystal structure of CaGd{sub 2−x}(WO{sub 4}){sub 4}:Er{sup 3+}/Yb{sup 3+} tungstates have been refined, and upconversion photoluminescence properties have been investigated. The synthesized particles, being formed after the heat-treatment at 900 °C for 16 h, showed a well crystallized morphology. Under the excitation at 980 nm, CaGd{sub 2}(WO{sub 4}){sub 4}:Er{sup 3+}/Yb{sup 3+} particles exhibited a strong 525-nm and a weak 550-nm emission bands in the green region and a very weak 655-nm emission band in the red region. The Raman spectrum of undoped CaGd{sub 2}(WO{sub 4}){sub 4} revealed about 12 narrow lines. The strongest band observed at 903 cm{sup −1} was assigned to the ν{sub 1} symmetric stretching vibration of WO{sub 4} tetrahedrons. The spectra of the samples doped with Er and Yb obtained under the 514.5 nm excitation were dominated by Er{sup 3+} luminescence preventing the recording of these samples Raman spectra. Concentration quenching of the erbium luminescence at {sup 2}H{sub 11/2}→{sup 4}I{sub 15/2} transition is weak in the range of erbium doping level x{sub Er}=0.05–0.2, while, for transition {sup 4}S{sub 3/2}→{sup 4}I{sub 15/2}, the signs of concentration quenching become pronounced at x{sub Er}=0.2. - Graphical abstract: CaGd{sub 2−x}(WO{sub 4}){sub 4}:Er{sup 3+}/Yb{sup 3+} phosphors with the doping concentrations of Er{sup 3+} and Yb{sup 3+} (x=Er{sup 3+}+Yb{sup 3+}, Er{sup 3+}=0.05, 0.1, 0.2 and Yb{sup 3+}=0.2, 0.45) have been successfully synthesized by the microwave sol–gel method and the crystal structure refinement, and upconversion photoluminescence properties have been investigated. - Highlights: • CaGd{sub 2−x}(WO{sub 4}){sub 4}:Er{sup 3+}/Yb{sup 3+} phosphors have been synthesized by the microwave sol–gel method. • The crystal structure of CaGd{sub 2−x}(WO{sub 4}){sub 4}:Er{sup 3+}/Yb{sup 3+} tungstates have been refined. • The upconversion photoluminescence properties have been investigated.
HPHT synthesis, structure and electrical properties of type-I clathrates Ba{sub 8}Al{sub x}Si{sub 46−x}
Clathrate compounds Ba{sub 8}Al{sub x}Si{sub 46−x} were successfully synthesized using the method of high-pressure and high-temperature (HPHT). In this process, we used BaSi{sub 2} as one of the starting materials in place of Ba metals, which reduces the complexity of the program caused by the extremely high chemical reactivity. By using this method, the processing time was reduced from few days to an hour. X-ray diffraction and structural refinement indicated this composition crystallized in type-I clathrate phase. Bond length analysis showed the Ba atoms in small dodecahedron had spherical thermal ellipsoids while those in large tetrakaidecahedron displayed anisotropic thermal ellipsoids. The negative Seebeck coefficient indicated transport processes were dominated by electrons as carriers, and increased with the increasing temperature. The electrical properties, including Seebeck coefficient and Power factor, were greatly enhanced by Al substitution. - Graphical abstract: Left: The cavity structure diagram of a China-type large volume cubic high-pressure apparatus, and the Type-I clathrate structure of sample synthesized using HPHT. Middle: X-ray Rietveld refinement profile for Ba{sub 8}Si{sub 46} and element mapping for Ba{sub 8}Al{sub 16}Si{sub 30}. Right: Temperature dependence of Seebeck coefficient for Ba{sub 8}Al{sub x}Si{sub 46−x} prepared by HPHT. - Highlights: • HPHT is a simple and rapid synthetic approach. • We use BaSi{sub 2} as one of the starting materials replacing Ba metals. • The processing time reduces from few days to an hour. • Structure determination is refined by Rietveld analysis of XRD data. • Variable temperature electrical properties are characterized.
Hydrogenation studies on NdScSi and NdScGe
NdScSi and NdScGe were synthesized from the elements via arc-melting and subsequent annealing. Their ordered La{sub 2}Sb type structures, with space group I4/mmm, were refined from single crystal X-ray diffractometer data: a=428.94(6) and b=1570.5(3) pm, wR2=0.0395, 309 F{sup 2} values for NdScSi and a=431.2(1) and c=1581.3(5) pm, wR2=0.1220, 227 F{sup 2} values for NdScGe, with 11 variables per refinement. Hydrogen insertion was performed on both Nd-based intermetallics by solid/gas reaction. Hydrogen uptake keeps the pristine compound space group but yields an anisotropic expansion of the unit cell with a large increase of c (≈+7%) and a slight decrease of a (≈−1.7%) parameters. Hydrogen absorption at 350 °C and under 5 bar of H{sub 2} pressure shows that the hydride NdScSiH{sub 1.48(5)} is formed. An in-situ neutron diffraction study during the deuteration of NdScSi reveals for the first time in a CeScSi-type compound, the possibility to fill two interstitial sites with deuterium atoms, leading to the composition NdScSiD{sub 1.5} for the deuteride adopting then the La{sub 2}Fe{sub 2}Se{sub 2}O{sub 3}-type structure. From magnetization measurements, we evidence that hydrogenation strongly reduces the Curie temperature of NdScSi (T{sub C}=175 K) and NdScGe (T{sub C}=194 K) since NdScSiH{sub 1.5} and NdScGeH{sub x} undergo a magnetic transition at 4 K and around 2 K, respectively. - Highlights: • Crystal structures of NdScSi and NdScGe were refined from single crystal XRD data. • The hydrogenation of NdScSi leads to the formation of the NdScSiH{sub 1.5} hydride. • NdScSiD{sub 1.5} adopts the La{sub 2}Fe{sub 2}Se{sub 2}O{sub 3}-type structure. • Hydrogenation strongly reduces the ordering temperature of both intermetallics.
Structure resolution by electron diffraction tomography of the complex layered iron-rich Fe-2234-type Sr{sub 5}Fe{sub 6}O{sub 15.4}
The crystal structure of the strontium ferrite Sr{sub 5}Fe{sub 6}O{sub 15.4}, was solved by direct methods on electron diffraction tomography data acquired on a transmission electron microscope. The refined cell parameters are a=27.4047(3) Å, b=5.48590(7) Å and c=42.7442(4) Å in Fm2m symmetry. Its structure is built up from the intergrowth sequence between a quadruple perovskite-type layer with a complex rock-salt (RS)-type block. In the latter iron atoms are found in two different environments : tetragonal pyramid and tetrahedron. The structural model was refined by Rietveld method based on the powder X-ray diffraction pattern. - Highlights: • Complex structure of Sr{sub 5}Fe{sub 6}O{sub 15.4} solved by electron diffraction tomography. • Observed Fourier maps allow determining missing oxygen atoms in the structure. • Structural model refined from powder X-ray diffraction data. • Intergrowth between quadruple perovskite layer with double rock-salt-type layer.
Phase equilibria in the NaF-CdO-NaPO{sub 3} system at 873 K and crystal structure and physico-chemical characterizations of the new Na{sub 2}CdPO{sub 4}F fluorophosphate
Isothermal sections of the diagram representing phase relationships in the NaF-CdO-NaPO{sub 3} system have been investigated by solid state reactions and powder X-ray diffraction. This phase diagram investigation confirms the polymorphism of the NaCdPO{sub 4} side component and the structure of the ß high temperature polymorph (orthorhombic, space group Pnma and unit cell parameters a=9.3118(2), b=7.0459(1), c=5.1849(1) Å has been refined. A new fluorophosphate, Na{sub 2}CdPO{sub 4}F, has been discovered and its crystal structure determined and refined from powder X-ray diffraction data. It exhibits a new 3D structure with orthorhombic symmetry, space group Pnma and unit cell parameters a=5.3731(1), b=6.8530(1), c=12.2691(2) Å. The structure is closely related to those of the high temperature polymorph of the nacaphite Na{sub 2}CaPO{sub 4}F and the fluorosilicate Ca{sub 2}NaSiO{sub 4}F but differs essentially in the cationic repartition since the structure is fully ordered with one Na site (8d) and one Cd site (4c). Relationships with other Na{sub 2}M{sup II}PO{sub 4}F (M{sup II}=Mg, Ca, Mn, Fe, Co, Ni) have been examined and the crystal-chemical and topographical analysis of these fluorophosphates is briefly reviewed. IR, Raman, optical and {sup 19}F, {sup 23}Na, {sup 31}P MAS NMR characterizations of Na{sub 2}CdPO{sub 4}F have been investigated. - Graphical abstract: The structure of the compound Na{sub 2}CdPO{sub 4}F, discovered during the study of the phase relationships in the NaF-CdO-NaPO{sub 3} system, has been determined and compared with other Na{sub 2}M{sup II}PO{sub 4}F fluorophosphates. - Highlights: • XRD analysis of the isothermal section of the NaF-CdO-NaPO{sub 3} system at 923 K. • Rietveld refinement of the high temperature polymorph β-NaCdPO{sub 4}. • Crystal structure of the new Na{sub 2}CdPO{sub 4}F fluorophosphate determined from powder XRD. • Crystal structure - composition relationships of Na{sub 2}M{sup II}PO{sub 4}F compounds are reviewed. • IR, Raman, optical and {sup 19}F, {sup 23}Na, {sup 31}P MAS NMR characterizations of Na{sub 2}CdPO{sub 4}F.
Microstructures in the 6060 aluminium alloy after various severe plastic deformation treatments
This paper presents the results concerning the microstructural refinement of the industrial 6060 aluminium alloy processed by severe plastic deformation (SPD). The high level of plastic deformation was achieved using the three methods: hydrostatic extrusion (HE), equal channel angular extrusion (ECAE) and extrusion torsion (ET), which differed in the dynamics of the loading, intensity and homogeneity of the plastic strain field. Microstructure analyses were performed before and after SPD deformation using a transmission (TEM) and a scanning electron microscope (SEM). The refined microstructures were examined qualitatively and quantitatively by the stereological methods and computer image analyses. The microstructure of the industrial 6060 aluminium alloy after deformation was characterized by an average grain size of about 0.4 {mu}m. The results show that the precipitates strongly affect the degree of refinement and the mechanism of microstructural transformations. During the SPD, the second phase particles break apart and homogenize. The HE method generates the largest increase of the volume fraction of the small primary particles. Moreover, the HE process is most effective in reducing the primary particle size. During HE and ECAE processes the second phase precipitates dissolve partially and change their shape. - Research Highlights: {yields} SPD results in a significant increase in the density of the small primary particles. {yields} SPD homogenizes the particle size distribution. {yields} HE and ECAE processes bring nano-grains in the vicinity of the primary particles. {yields} HE and ECAE processing results in the {beta}' precipitates partial dissolutions. {yields} During HE and ECAE processes the {beta}' particles change their shape.