SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Operational and engineering aspects of the Apollo 17 mission are outlined. The vehicle configuration was similar to those of Apollo 15 and 16. There were significant differences in the science payload for Apollo 17 and spacecraft hardware differences and experiment equipment are described. The mission achieved a landing in the Taurus-Littrow region of the moon and returned samples of the pre-Imbrium highlands and young craters.
Major, minor, and trace element analyses are presented for two igneous rocks, six breccias, four microbreccias, two breccia clasts, and six soils, as well as a sample of sawdust from rock 14066. Evaluation of the data suggests that the samples from the Fra Mauro highlands have the same nonterrestrial characteristics shown previously by the samples returned from the mare regions by Apollo 11 and 12 - namely, a high refractory element content, a lower volatile element content, and an excess reducing capacity above that due to FeO. The Fra Mauro soils have higher concentrations of Al2O3, Na2O, and K2O and lower amounts of FeO and TiO2 than do the mare soils. They also show a bimodal distribution of Ni, B, and Nb. The highland breccias are richer in SiO2, Al2O3, MgO, Na2O, and K2O than those returned from the mare lowlands. FeO, TiO2, and MnO are lower in concentration at Fra Mauro, and the highland breccias are more complex mineralogically than those collected previously.
Two lines of evidence support each other in suggesting that a large volume of the rocks near the lunar surface possess a uniform remanent magnetization with an intensity of about .000002 emu/g. The first line is the discovery by several groups of investigators of weak but stable remanent magnetizations in igneous samples returned from the first four Apollo missions. Although the mechanism of acquisition of this remanence has not been definitely established, several lines of evidence, including thermal demagnetization, suggest that it is a thermoremanent magnetization (TRM) carried by iron. Many of the breccias are similarly magnetized. The second line is the measurement of significant fields at the Apollo sites and the discovery of large-scale anomalies by the sub-satellite magnetometer experiment.
The Apollo 15 and 16 experiments are discussed. The formal scientific experiments conducted in lunar orbit are listed in an appendix. The gamma ray spectrometer performed a compositional survey of the upper 30 cm of the lunar surface by observing the gamma rays emitted during the radioactive decay of naturally occurring radioisotopes and their daughter products, and of the radioisotopes produced by cosmic ray bombardment of lunar surface materials. The results from the Apollo 15 X-ray spectrometer have shown excellent correlation between returned samples and gross lunar features. The various systems and experiments are described in detail.
The soil mechanics experiment on the Apollo 17 mission to the Taurus-Littrow area of the moon is discussed. The objectives of the experiment were to determine the physical characteristics and mechanical properties of the lunar soil at the surface and subsurface in lateral directions. Data obtained on the lunar surface in conjunction with observations of returned samples of lunar soil are used to determine in-place density and porosity profiles and to determine strength characteristics on local and regional scales.
The mineralogy, petrology, chemistry, isotopic composition, and physical properties of lunar materials are described in papers detailing methods, results, and implications of research on samples returned from eight lunar landing sites: Apollo 11, 12, 14, 15, 16, 17, and Luna 16 and 20. The results of experiments conducted or set up on the lunar surface by the astronauts are also described along with observations taken from Command Modules and subsatellites. Major topics include general geology, soil and breccia studies, petrologic studies, mineralogic analyses, elemental compositions, radiometric age determinations, rare gas chemistry, radionuclides, organogenic compounds, particle track records, thermal properties, seismic studies, resonance studies, orbital mapping, lunar atmosphere, magnetic studies, electrical studies, optical properties, and microcratering. Individual items are announced in this issue.
The results are presented of investigating lunar rock samples returned by the Luna 16 automatic station, using electron paramagnetic resonance (EPR). The EPR technique makes it possible to detect paramagnetic centers and investigate their nature, with high sensitivity. Regolith (finely dispersed material) and five particles from it, 0.3 mm in size, consisting mostly of olivine, were investigated with EPR.
Samples returned to earth by Luna 16, were studied with a high voltage electron microscope for ultramicroscopic features. The following amazing features were noted in particles of surface material returned in all the lunar trips: A very high density of tracks of nuclear particles, ultrathin amorphous shells, highly rounded forms, and amazingly good ordering of crystal lattice. These features were used along with calibration experiments in solving the following problems: (1) determining the energy spectrum and chemical abundances of the very heavy nuclei in the solar wind and in the solar cosmic rays; (2) studying the past activity of the sun; (3) obtaining data on lunar dynamic processes affecting dust particles; (4) analyzing composite effects caused by penetration of solar wind into the lunar surface material; and (5) establishing the existence of the ancient lunar atmosphere and magnetic field.
Using an electron scanning microscope and a high voltage microscope, a study was made of the radiation damage and structure of micron sized grains and grains separated from the 200-mesh fraction of the L-16-19 surface material sample. Then the structural features were compared with those found by studying with the same techniques grains separated from 20 different samples of lunar dust taken from the Apollo 11, Apollo 12, Apollo 14, and Apollo 15 collections. The L-16-19 sample is similar to the most intensely irradiated samples returned to earth by Apollo craft.
Results are reported on an investigation of the mechanical properties of the lunar surface material sample returned by the Luna 16 automatic station. The study included determination of the specific weight of the surface material, the nature of its disintegration, and the determination of its compressibility characteristics, shear resistance, and bearing capacity. Quantitative data are presented on mechanical properties for the lunar surface material, many of which are determined for the first time. The instruments and experimental techniques are described.
A mathematical procedure for analyzing the heat conductivity of the lunar surface is discussed. The solution is based on homogeneous and laminated moon models and considers the effects of radioactive elements conveyed to the lunar surface by melting. The various parameters which introduce uncertainties into the numerical analysis are identified. The application of data obtained from radio astronomy and from analyses of lunar samples returned by the Apollo flights is explained. Tables of data are included to show the types and amounts of radioactive materials which have been identified.
The planning of biological isolation measures for the Mars Surface Sample Return Mission is discussed in terms of personnel and organizational management. Deficiencies in past operation of the Lunar Receiving Laborator are analyzed. It was found that the failure to clearly define relationship among the government agencies involved and to effectively integrate their objectives and responsibilities was a major cause of Laboratory deficiencies. Possible solutions to these problems are presented for application to future missions.
Problems related to an unmanned exploration of the planet Mars by means of an autonomous roving planetary vehicle are investigated. These problems include: design, construction and evaluation of the vehicle itself and its control and operating systems. More specifically, vehicle configuration, dynamics, control, propulsion, hazard detection systems, terrain sensing and modelling, obstacle detection concepts, path selection, decision-making systems, and chemical analyses of samples are studied. Emphasis is placed on development of a vehicle capable of gathering specimens and data for an Augmented Viking Mission or to provide the basis for a Sample Return Mission.
Consideration has been given to the entry of vehicles into the atmospheres of all planets with the exception of Pluto and to missions for returning samples to Earth from all the planets (excepting Pluto), the satellites of Mars, Jupiter, and Saturn, the Moon, the asteroids, and certain comets. The efficient planning of the space missions including the appropriate design of the spacecraft requires that operational and environmental parameter values for the large range of mission options included be adequately known. The need to obtain the data required as a basis for the computational studies involved makes it necessary to conduct a comprehensive experimental research program. Details concerning the experimental facilities employed in this program are discussed, giving attention to shock tubes, the planetary-entry radiation facility, ballistic ranges, an expansion tube, a hypersonic tetrafluoromethane tunnel, and arcjet facilities.
The vacuum thermal conductivity of the Apollo 16 fines is presented as a function of temperature for the approximate range of diurnal temperatures on the moon. The density used is 1500 kg/cu m, which is approximately the density of the core tube samples returned from the landing site. The thermal diffusivity was calculated from the conductivity, density and specific heat and is also presented. These properties along with the reflectance and emittance are used in a calculation of temperature in the lunar surface layer.
The moon is covered to a depth of several meters with fine material. Heat transfer calculations depend, therefore, for the most part on the properties of the fines. The results are presented of thermal conductivity measurements on fines samples returned by the Apollo 15 mission from the Hadley-Apennine region of the moon. Data are presented as a function of both density and temperature with typical lunar values being used for these parameters.
The vacuum thermal conductivity of the Apollo 16 fines is presented as a function of temperature for the approximate range of diurnal temperatures on the moon. The density used is 1500 kg/cu m, which is approximately the density of the core-tube samples returned from the landing site. The thermal diffusivity was calculated from the conductivity, density, and specific heat and is also presented.
The minimum scientific spacecraft instrumentation is considered that is likely to result in as complete an understanding of the composition, structure, and activity of a cometary nucleus as is possible without landing on it. The payload will also give useful results on secondary goals of a better understanding of physical processes in the inner and outer coma. Studies of composition, by means of an actual landing on the surface, details of the internal structure of the nucleus, and sample return were considered beyond the scope of this mission.