Search NASA⌕ Search

SEARCH · Search NASA

Results for “Accountability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Propagation of Spin Waves Through an Interface Between Ferromagnetic and Antiferromagnetic Materials

Boundary conditions for order parameters at an interface between ferromagnetic (FM) and two-sublattice antiferromagnetic (AFM) materials are obtained in the continuous medium approximation similarly to the approach which allows one to take into account the finite thickness of the FM/FM interface, which is much less than spin wavelength. Three order parameters are considered inside an interface of finite thickness with the magnetization M of FM, magnetizations of both sublattices M{sub 1} and M{sub 2} of AFM. The uniform and non-uniform exchange between all order parameters are taken into account to the interface energy. Using these boundary conditions, the excitation of a surface evanescent spin wave is considered in AFM when the spin wave in FM falls onto this interface. The coefficients and the phases of transmission and reflection of spin wave through the FM/AFM interface are derived.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Influence of Temperature on the Cyclic Properties of the Transversely Isotropic Nanocomposite System Under Kinematic Harmonic Loading

A micromechanical model is developed to determine the effective inelastic properties of nanocomposites under monoharmonic deformation by taking into account the detailed microstructural geometries and constitutive models of the constituents. By using the correspondence principle in viscoelasticity and the modified Mori–Tanaka method, the effects of interface between the inclusion and the matrix are taken into account. By applying the developed model, we perform the numerical analysis aimed at the determination of complex moduli for a polymeric nanocomposite reinforced with nanofibers composed from carbon nanotubes under the isothermal conditions. The dependences of complex moduli on temperature and the amplitude of strain intensity are analyzed. The composites reinforced with unidirectionally aligned nanofibers are considered. The accumulated results demonstrate a strong dependence of the storage and loss moduli on temperature within a broad temperature range. The storage and loss moduli are found to monotonically increase with the volume fraction of nanofibers. At the same time, they decrease as temperature increases. The obtained results show that the strength of material decreases as temperature increases in the elastic and inelastic regions and the inelastic behavior occurs for lower strain amplitude as temperature increases.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Equations of the Local Gradient Electromagnetothermomechanics of Polarizable Nonferromagnetic Bodies with Regard for Electric Quadrupole Moments

We formulate a complete system of relations of the local gradient electromagnetothermomechanics of electrically conductive nonferromagnetic polarizable solid media. The nonlocal character of the constitutive relations of the proposed mathematical model is explained by the presence of electric quadrupole moments in the polarization current. As a result of taking into account these moments, the space of parameters of the thermodynamic state of the body is expanded by including a pair of additional conjugate parameters, namely, the quadrupole moment and the gradient of the vector of electric-field intensity. It is shown that the developed model takes into account the electromechanical interaction for materials with high level of symmetry (isotropic materials) and describes the flexoelectric and thermopolarization effects. We also present the key system of equations for a physically and geometrically linear medium.

97 MATHEMATICS AND COMPUTING↗

Steady-state radiochemical transport model of the molten salt reactor experiment

A radiochemical transport model of the Molten Salt Reactor Experiment (MSRE) was formulated based on the material derivative featuring system level 1-D flow providing spatial dependence accounting for multiple phenomena including radioactive decay, chemical removal, and fuel depletion across custom volume regions. Further, the steady-state version, which is based on a system of ODE's, can be solved efficiently and is useful for sensitivity studies utilizing Monte Carlo sampling. Accounting for multiple phenomena in a fully coupled model is necessary to understand the complexities of transport and distribution of radionuclides throughout the primary loop of a flowing fuel reactor.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Geological Modeling of Gold Deposit Based on Grade Domaining Using Plurigaussian Simulation Technique

Mineral resource evaluation requires defining grade domains of an ore deposit. Common practice in mineral resource estimation consists of partitioning the ore body into several grade domains before the geostatistical modeling and estimation at unsampled locations. Many ore deposits are made up of different mineralogical ensembles such as oxide and sulfide zone: being able to model the spatial layout of the different grades is vital to good mine planning and management. This study addresses the application of the plurigaussian simulation to Sivas (Turkey) gold deposits for constructing grade domain models that reproduce the contacts between different grade domains in accordance with geologist's interpretation. The method is based on the relationship between indicator variables from grade distributions on the Gaussian random functions chosen to represent them. Geological knowledge is incorporated into the model by the definition of the indicator variables, their truncation strategy, and the grade domain proportions. The advantages of the plurigaussian simulation are exhibited through the case study. The results indicated that the processes are seen to respect reproducing complex geometrical grades of an ore deposit by means of simulating several grade domains with different spatial structure and taking into account their global proportions. The proposed proportion model proves as simple to use in resource estimation, to account for spatial variations of the grade characteristics and their distribution across the studied area, and for the uncertainty in the grade domain proportions. The simulated models can also be incorporated into mine planning and scheduling.

58 GEOSCIENCES↗

Interaction between the emerging components of online shopping and in-person activities: insights from a behavioral survey

The rise of technological advancements has led to the commonplace practice of online shopping for retail, grocery, and food. However, little research has been conducted on the interplay of these components in burdened communities (BCs) that face issues of marginalization and limited access to digital resources. Here, this study aims to provide a comprehensive understanding of travel behavior changes by analyzing the interconnectedness of the emerging components of online shopping (retail, grocery, and food) and in-person activities in both BCs and non-BCs. A unique household-level database is created by linking the 2021 Puget Sound Household Travel Survey and the US Department of Transportation’s burdened community databases, and a conditional mixed process model is estimated to account for unobserved endogeneity. The findings suggest households living in BCs are less likely to order online retail goods and groceries compared to non-BC households. Additionally, the probability of making more restaurant trips decreases for households living in BCs. The study highlights the digital divide that exists in BCs and the differences in online and in-person shopping activities across socioeconomic levels. Policymakers may address these disparities to promote better access to goods and services for all. Besides, planners may need to improve the travel demand models by accounting for the emerging components of online shopping and the trip frequencies by purpose in BCs.

Digital Divide↗

Alternative mechanisms of thermal decomposition of o-nitrotoluene in the gas phase

The density functional theory methods were used to demonstrate that during the thermal decomposition of o-nitrotoluene, with the formation of 5-methylene-6-aci-nitrocyclohexa- 1,3-diene (aci-form) being the primary event, the rotation of the =N(O)OH group around the CN double bond in the aci-form is of key importance. The activation enthalpy is lower for this step than for the alternative process of H atom transfer between the O atoms in this group. This accounts for the competitive formation of the experimentally observed products of о-nitrotoluene thermal decomposition, namely, the hydroxyl radical and water. The activation barriers of the reactions were estimated over a broad temperature range, which indicated the possible contribution of о-nitrotoluene thermal decomposition and other alternative primary event mechanisms (nitro—nitrite rearrangement, bicyclization) to the efficient rate constant. The results account for the differences between the activation parameters experimentally determined at various temperatures by different authors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Combined Model of Charging of the Surface and Bulk of a Dielectric Target by Electrons with the Energies 10–30 keV

A physico-mathematical model of the processes of radiation-induced charging of dielectric materials with open surfaces, irradiated with monoenergetic electrons in the energy range 10–30 keV, is described. The model takes into account the relationship between the processes of surface and bulk charging for the given conditions of the experimental design, which accounts for the effect of anomalously long charging of dielectrics after the incident energy of primary electrons during charging is reduced to below the second critical energy for the secondary electronic emission coefficient. The initial fast phase of charging a high-resistivity dielectric material (Al{sub 2}O{sub 3}) is investigated. It is shown that as the incident electron energy is approaching the second critical energy during charging, the secondary electronic emission is partially suppressed due to negative charging of the open surface of the dielectric and formation of a near-surface inversion electrical field retarding the electronic emission yield.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Energy Spectrum and Optical Absorption of Isomer No. 11 of С{sub 84} Fullerene of С{sub 2} Symmetry Within the Hubbard Model

Energy spectrum of isomer No. 11 of С{sub 84} fullerene of С{sub 2} symmetry is calculated within the Hubbard model. Based on the obtained energy spectrum, the optical absorption spectrum is modeled taking into account not only allowed, but also forbidden symmetry transitions. Good qualitative agreement with the experimental data is obtained. This suggests that when studying fullerenes, the intra-site Coulomb interaction of electrons must be taken into account.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Non-carbonaceous–Carbonaceous Meteorite Dichotomy

The isotopic dichotomy between non-carbonaceous (NC) and carbonaceous (CC) meteorites indicates that meteorite parent bodies derive from two genetically distinct reservoirs, which presumably were located inside (NC) and outside (CC) the orbit of Jupiter and remained isolated from each other for the first few million years of the solar system. Here we review the discovery of the NC–CC dichotomy and its implications for understanding the early history of the solar system, including the formation of Jupiter, the dynamics of terrestrial planet formation, and the origin and nature of Earth’s building blocks. The isotopic difference between the NC and CC reservoirs is probably inherited from the solar system’s parental molecular cloud and has been maintained through the rapid formation of Jupiter that prevented significant exchange of material from inside (NC) and outside (CC) its orbit. The growth and/or migration of Jupiter resulted in inward scattering of CC bodies, which accounts for the co-occurrence of NC and CC bodies in the present-day asteroid belt and the delivery of presumably volatile-rich CC bodies to the growing terrestrial planets. Earth’s primitive mantle, at least for siderophile elements like Mo, has a mixed NC–CC composition, indicating that Earth accreted CC bodies during the final stages of its growth, perhaps through the Moon-forming giant impactor. The late-stage accretion of CC bodies to Earth is sufficient to account for the entire budget of Earth’s water and highly volatile species.

58 GEOSCIENCES↗

Simulation of Subsurface Multiphase Contaminant Extraction Using a Bioslurping Well Model

Subsurface simulation of multiphase extraction from wells is notoriously difficult. Explicit representation of well geometry requires small grid resolution, potentially leading to large computational demands. To reduce the problem dimensionality, multiphase extraction is mostly modeled using vertically-averaged approaches. In this paper, a multiphase well model approach is presented as an alternative to simplify the application. The well model, a multiphase extension of the classic Peaceman model, has been implemented in the STOMP simulator. The numerical solution approach accounts for local conditions and gradients in the exchange of fluids between the well and the aquifer. Advantages of this well model implementation include the option to simulate the effects of well characteristics and operation. Simulations were conducted investigating the effects of extraction location, applied vacuum pressure, and a number of hydraulic properties. The obtained results were all consistent and logical. A major outcome of the test simulations is that, in contrast with common recommendations to extract from either the gas-NAPL or the NAPL-aqueous phase interface, the optimum extraction location should be in between these two levels. Further, the new model implementation was also used to simulate extraction at a field site in Brazil. The simulation shows a good match with the field data, suggesting that the new STOMP well module may correctly represent oil removal. The field simulations depend on the quality of the site conceptual model, including the porous media and contaminant properties and the boundary and extraction conditions adopted. The new module may potentially be used to design field applications and analyze extraction data.

42 ENGINEERING↗

Immobile Pore-Water Storage Enhancement and Retardation of Gas Transport in Fractured Rock

The effect of immobile pore-water on gas transport in fractured rock has implications for numerical modeling of soil vapor extraction, methane leakage, gaseous CO 2 leakage from sequestration operations, radionuclide transport from underground nuclear explosions, and nuclear waste disposal. While the ability for immobile pore-water storage to effect gas transport has been recognized in the past, the details and specific scenarios leading to enhanced, retarded, or unaffected gas transport have not been explored. In this paper, we performed numerical investigations into the enhancement and retardation of gas transport due to immobile pore-water storage in order to identify implications for gas transport applications. To do this, we developed a numerical approach to model gas transport with a single-phase flow solution coupled to the advection–dispersion equation modified to account for immobile pore-water storage. Other than the immobility of pore water, the formulation contains all other physics included in two-phase formulations (advective and diffusive gas transport in fractures and rock matrix and dissolution in immobile pore water). The assumption of immobile pore water is valid here since for many applications involving transport of soluble gases in fractured rock, the rate of aqueous transport is insignificant compared to gas transport. We verify our modeling approach with analytical solutions of: (1) 1D gas diffusion, (2) 1D gas advection, (3) barometric pumping of a fracture, and (4) gas transport with uniform fracture flow and diffusion into the matrix. We account for pore-water storage in our model by implementing a kinetic formulation of gas dissolution wherein the dissolved (aqueous) phase is considered an immobile constituent. Using this formulation, we model the effect of dissolution rate and saturation on the retardation of gas transport during pure diffusion and pure advection. We also demonstrate that although it is commonly believed that pore-water storage will always enhance gas transport in fractures during oscillatory flow (e.g., during reversing pressure gradients such as barometric pumping cycles), our simulations indicate that this may not always be the case. Our numerical investigations indicate that scenarios with lower effective diffusion coefficients ( &#x2A85;<!-- <≈ --> 10 &#x2212;<!-- - --> 5 &#xA0;m 2 / s ) and lower dissolution coefficients (i.e., the dissolution diffusion coefficient) ( &#x2A85;<!-- <≈ --> 10 &#x2212;<!-- - --> 11 &#xA0;m 2 / s ) will result in enhanced gas transport. Other combinations of gaseous diffusion and dissolution coefficients result in delayed gas transport or insignificant effect on gas transport. Based on these results, and given the fact that the free-air diffusion coefficients for many gases are slightly above 10 &#x2212;<!-- - --> 5 &#xA0;m 2 / s (near the boundary of enhanced/non-enhanced gas transport), tortuosity would have to be significant for gas transport enhancement to occur. Similarly, if we consider the free-water diffusion coefficient of gases (around 10 &#x2212;<!-- - --> 9 &#xA0;m 2 / s for many gases of interest) to be a maximum bound for the effective dissolution coefficients (i.e., the rate of diffusion into the water away from the air/water interface will limit the dissolution rate), the effective dissolution coefficient would have to be at least 2 orders of magnitude less for enhanced gas transport to occur. Otherwise, pore-water storage will delay or have negligible effect on the gas transport. The results also indicate that the assumption of instantaneous equilibrium, often invoked in numerical codes for dissolution processes (i.e., dissolution coefficient is effectively infinite), will fail to accurately capture important details of soluble gas transport. Finally, the implication of our results is that gas breakthrough times in fractured rock during oscillatory flow may be highly dependent on the effective gaseous diffusion and dissolution coefficients.

58 GEOSCIENCES↗

A Feature-Based Stochastic Permeability of Shale: Part 2–Predicting Field-Scale Permeability

We report that in a recent numerical study, it was demonstrated that characterizing reservoir permeability in terms of rock’s quality, as observed in lab and field, is the most important step before implementing an enhanced oil recovery operation or drilling a new well in a tight formation. In that study, it was shown that permeable features in shale-like organic matter (OM) and fractures were the only regions that allowed some reasonable movement of fluid, whereas inorganic matter (iOM) that occupies larger pore volume with significant saturation of hydrocarbons has extremely low permeability that did not allow any reasonable fluid movement to affect production. That study demonstrated the importance of characterizing reservoir heterogeneity in shale in order to economically exploit the shale resource. This study proposes a method to predict spatially heterogeneous field-scale permeability of shale in terms of natural fractures, and matrix (iOM and OM). The method developed in Part 1 is combined with a history-matching process that uses only readily available information from lab-scale and outcrop (information from geologists) to predict field-scale permeability. The method also ensures consistency between the underlying fracture distribution and optimally matched fracture lengths and their apertures, in addition to accounting for random distribution of fractures and their abundance. Optimized parameters of fracture distribution are used to generate multiple realizations of geological model, and the “best-fitting” (most-likely) permeability scenario is chosen by generating production response of each realization of the geological model and comparing them against the observed field production history. Finally, the novelty of the proposed to predict field-scale permeability is that it uses only readily available information while also ensuring consistency between the underlying fracture distribution and optimally matched fracture lengths and their apertures, in addition to accounting for random distribution of fractures and their abundance.

58 GEOSCIENCES↗

Experimental Validation of an Additively Manufactured Stiffness-Optimized Short-Fiber Reinforced Composite Clevis Joint

This effort describes experiments for the validation of the response of an additively manufactured stiffness-optimized short-fiber reinforced composite. A Direct Ink Write (DIW) method is used to additively manufacture a clevis joint plate which was designed such that its compliance would be minimized (i.e., stiffness maximized) for far-field axial loading. A unique aspect of the optimization scheme is that it accounts for manufacturing constraints, such as tool turn radius and tool path spacing. Along with the optimized clevis joint plate, additively manufactured 0°–90° and ± 45° composite plates of the same number of layers, as well as a control 0°–90° sample of resin only, were also studied. In addition to far-field load-displacement, near-field strain was monitored using digital image correlation (DIC). The results showed that the optimized plate did indeed exhibit the largest stiffness, based on far-field measurements. DIC-measured strains showed that locally the axial strain component, which is the largest, was also minimized for the optimized specimen, although the other strain components followed different trends. Furthermore, in the experiments it was seen that the optimized design exhibited a nonlinear/hysteretic behavior which is believed to be a consequence of its internal gap/cell structure. This internal structure, which results by optimized placement of material, although explicitly not accounted for in the optimization, may affect global response. Lastly, although not a part of the optimization study itself, the failure load for the optimized joint plate was also seen to be the largest of all the cases studied.

42 ENGINEERING↗

Challenge clusters facing LCA in environmental decision-making—what we can learn from biofuels

Purpose: Bioenergy is increasingly used to help meet greenhouse gas (GHG) and renewable energy targets. However, bioenergy’s sustainability has been questioned, resulting in increasing use of life cycle assessment (LCA). Bioenergy systems are global and complex, and market forces can result in significant changes, relevant to LCA and policy. The goal of this paper is to illustrate the complexities associated with LCA, with particular focus on bioenergy and associated policy development, so that its use can more effectively inform policymakers. Methods: The review is based on the results from a series of workshops focused on bioenergy life cycle assessment. Expert submissions were compiled and categorized within the first two workshops. Over 100 issues emerged. Accounting for redundancies and close similarities in the list, this reduced to around 60 challenges, many of which are deeply interrelated. Some of these issues were then explored further at a policy-facing workshop in London, UK. The authors applied a rigorous approach to categorize the challenges identified to be at the intersection of biofuels/bioenergy LCA and policy. Results and discussion: The credibility of LCA is core to its use in policy. Even LCAs that comply with ISO standards and policy and regulatory instruments leave a great deal of scope for interpretation and flexibility. Within the bioenergy sector, this has led to frustration and at times a lack of obvious direction. This paper identifies the main challenge clusters: overarching issues, application and practice and value and ethical judgments. Many of these are reflective of the transition from application of LCA to assess individual products or systems to the wider approach that is becoming more common. Uncertainty in impact assessment strongly influences planning and compliance due to challenges in assigning accountability, and communicating the inherent complexity and uncertainty within bioenergy is becoming of greater importance. Conclusions: The emergence of LCA in bioenergy governance is particularly significant because other sectors are likely to transition to similar governance models. LCA is being stretched to accommodate complex and broad policy-relevant questions, seeking to incorporate externalities that have major implications for long-term sustainability. As policy increasingly relies on LCA, the strains placed on the methodology are becoming both clearer and impedimentary. The implications for energy policy, and in particular bioenergy, are large.

09 BIOMASS FUELS↗

Magnetic moments of spherical nuclei: Status of the problem and unsolved issues

Dipole magnetic moments of more than 100 odd spherical nuclei are calculated within the theory of finite Fermi systems. For the effective interaction of nucleons within the theory of finite Fermi systems, use is made of a version that takes into account nuclear-medium-modified amplitudes for the exchange of one pion and one rho meson. A new tensor local charge {zeta}{sub t} is incorporated in the theory of finite Fermi systems in addition to the known orbital ({zeta}{sub l}) and spin ({zeta}{sub s}) local charges. Good agreement with experimental data, at a level of 0.1 to 0.2{mu}{sub N}, is obtained for the overwhelming majority of the nuclei considered here. Several cases of a significant discrepancy with experimental data, at a level of 0.3 to 0.5{mu}{sub N}, are revealed. Possibilities for removing these discrepancies are discussed. A detailed comparison with known results obtained within the multiparticle shell model is performed for 2p-to 1f-shell nuclei. Cases where the standard theory of finite Fermi systems must be extended by taking into account multiparticle configurations are found. Magnetic moments are analyzed for a number of long isotopic chains. Several new experimental values of magnetic moments for copper isotopes far from the beta-stability valleys are known. For the example of the copper-isotope chain, it is shown how the emergence of a deformation in the ground state of a nucleus can be revealed on the basis of a systematic analysis of magnetic moments.

74 ATOMIC AND MOLECULAR PHYSICS↗

Decrease in effective electron mobility in the channel of a metal-oxide-semiconductor transistor as the gate length is decreased

Effective electron mobility {mu}{sub eff} in channels of metal-oxide-semiconductor transistors with a gate length L in the range of 3.8 to 0.34 {mu}m was measured; the transistors were formed on wafers of the silicon-oninsulator type. It was found that {mu}{sub eff} decreases as L is decreased. It is shown that this decrease can be accounted for by the effect of series resistances of the source and drain only if it is assumed that there is a rapid increase in these resistances as the gate voltage is decreased. This assumption is difficult to substantiate. A more realistic model is suggested; this model accounts for the observed decrease in {mu}{sub eff} as L is decreased. The model implies that zones with a mobility lower than that in the middle part of the channel originate at the edges of the gate. An analysis shows that, in this case, the plot of the dependence of 1/{mu}{sub eff} on 1/L should be linear, which is exactly what is observed experimentally. The use of this plot makes it possible to determine both the electron mobility {mu}{sub 0} in the middle part of the channel and the quantity A that characterizes the zones with lowered mobility at the gate's edges.

36 MATERIALS SCIENCE↗

Monte Carlo Simulations of 347H Stainless Steel Aging for the Synthetic Generation of Microstructures Under Creep Conditions

Here, a Monte Carlo simulation method capable of replicating the kinetics of M 23 C 6 precipitation in 347H stainless steels was developed for the purpose of producing synthetic microstructures that approximate its microstructural evolution under aging periods of up to 10,000 hours at temperatures between 600 °C and 750 °C. To accomplish this, experimental data from the literature was used to parameterize simulations and replicate the nucleation and growth kinetics of M 23 C 6 particles within 347H and similar austenitic stainless steel alloys. These simulations were found to have considerable fidelity to previous efforts to study the precipitation of M 23 C 6 in other 300 series stainless steel alloys. Synthetic 347H microstructures were then generated that accounted the effects of aging temperature, duration, dislocation density, and the presence of boron within the microstructure. These simulations predict several key trends, those being that (1) the size of M 23 C 6 precipitates decreased with aging temperature and (2) the growth rate of M 23 C 6 particles decreased with aging temperature. Further, while (3) the addition of dislocation density due to creep conditions resulted in increasing intragranular nucleation of M 23 C 6 precipitates with increasing dislocation density and (4) B additions within the microstructure led to modest increases in precipitate size above 700 °C, which indicates that more complex physics are necessary to account for the presence of B.

36 MATERIALS SCIENCE↗