Search NASA⌕ Search

SEARCH · Search NASA

Results for “Battery Modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Where and When Does Solar Plus Storage Make Sense for Commercial Buildings?

As the capital cost of battery energy storage systems (BESS) declines, opportunities for commercial buildings to achieve net savings through peak demand management and energy arbitrage are emerging. National Renewable Energy Laboratory researchers modeled energy storage project economics - with and without accompanying solar photovoltaic systems - using local utility rates, ASHRAE climate zones, and solar intensity data to identify regions where these systems deliver life cycle savings now and in future cost scenarios.

battery energy storage systems↗

Mutual modulation between surface chemistry and bulk microstructure within secondary particles of nickel-rich layered oxides

Abstract Surface lattice reconstruction is commonly observed in nickel-rich layered oxide battery cathode materials, causing unsatisfactory high-voltage cycling performance. However, the interplay of the surface chemistry and the bulk microstructure remains largely unexplored due to the intrinsic structural complexity and the lack of integrated diagnostic tools for a thorough investigation at complementary length scales. Herein, by combining nano-resolution X-ray probes in both soft and hard X-ray regimes, we demonstrate correlative surface chemical mapping and bulk microstructure imaging over a single charged LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) secondary particle. We reveal that the sub-particle regions with more micro cracks are associated with more severe surface degradation. A mechanism of mutual modulation between the surface chemistry and the bulk microstructure is formulated based on our experimental observations and finite element modeling. Such a surface-to-bulk reaction coupling effect is fundamentally important for the design of the next generation battery cathode materials.

25 ENERGY STORAGE↗

Sustainable recovery of critical metals from spent lithium-ion batteries through gluconic acid-based bioleaching: Techno-economic analysis, life cycle assessment and process optimization

Recycling spent lithium-ion batteries (LIB) could potentially bridge the ever increasing supply and demand gap for critical metals and simultaneously facilitate the management of hazardous battery waste. This study investigated the optimization of gluconic acid-based bioleaching technology through design of experiments (DOE), combined with techno-economic analysis (TEA), and life cycle assessment (LCA) with the aim of maximizing the net present value (NPV) and minimizing global warming impacts of the process. Biolixiviant containing predominantly gluconic acid produced by the genetically engineered (ΔpstS, P 112 :mgdh) Gluconobacter oxydans B58 through fermentation using non-recyclable paper as a growth substrate was used for the LIB leaching. At optimal bioleaching conditions of gluconic acid (160 mM), leaching time (2.5 h), reducing agent FeSO 4 to metal, i.e., cobalt (Co), nickel (Ni) and manganese (Mn), mole ratio (0.88), temperature (55 °C) and pulp density (2.5 %), the leaching efficiency was 87 % 72 %, 94 %, and 88 % for Co, Ni, Mn and lithium (Li), respectively. TEA analysis confirmed that bioleaching plant with an annual black mass processing capacity of 10,000 metric tons and plant life of 30 years would be economically viable with an NPV and profit margin of $136 million and 11 %, respectively. The predicted carbon footprint of gluconic acid-based bioleaching for recovering 1 kg of Co (13.2 kg of CO 2 eq.) is lower compared to that of most state-of-the-art leaching technologies. Moreover, gluconic acid-based bioleaching effectively recovered target metals when tested for different black mass chemistries.

Bioleaching↗

Simulating hindered grain boundary diffusion using the smoothed boundary method

Abstract Grain boundaries can greatly affect the transport properties of polycrystalline materials, particularly when the grain size approaches the nanoscale. While grain boundaries often enhance diffusion by providing a fast pathway for chemical transport, some material systems, such as those of solid oxide fuel cells and battery cathode particles, exhibit the opposite behavior, where grain boundaries act to hinder diffusion. To facilitate the study of systems with hindered grain boundary diffusion, we propose a model that utilizes the smoothed boundary method to simulate the dynamic concentration evolution in polycrystalline systems. The model employs domain parameters with diffuse interfaces to describe the grains, thereby enabling solutions with explicit consideration of their complex geometries. The intrinsic error arising from the diffuse interface approach employed in our proposed model is explored by comparing the results against a sharp interface model for a variety of parameter sets. Finally, two case studies are considered to demonstrate potential applications of the model. First, a nanocrystalline yttria-stabilized zirconia solid oxide fuel cell system is investigated, and the effective diffusivities are extracted from the simulation results and are compared to the values obtained through mean-field approximations. Second, the concentration evolution during lithiation of a polycrystalline battery cathode particle is simulated to demonstrate the method’s capability.

Materials Science↗

Field reconstruction from proton radiography of intense laser driven magnetic reconnection

Magnetic reconnection is a process that contributes significantly to plasma dynamics and energy transfer in a wide range of plasma and magnetic field regimes, including inertial confinement fusion experiments, stellar coronae and compact, highly magnetized objects like neutron stars. Laboratory experiments in different regimes can help refine, expand and test the applicability of theoretical models to describe reconnection. Laser-plasma experiments exploring magnetic reconnection at moderate intensities (I L ~ 10 14 Wcm -2 ) have been performed previously, where the Biermann battery effect self-generates magnetic fields and the field dynamics studied using proton radiog- raphy. At high laser intensities (I L λ$2\atop{L}$ > 10 18 Wcm -2 μm 2 ), relativistic surface currents and the time-varying electric sheath fields generate the azimuthal magnetic fields. Numerical modeling of these intensities has shown the conditions within the magnetic field region can reach the threshold where the magnetic energy can exceed the rest mass energy such that σ cold = B 2 /(μ 0 n e m e c 2 ) > 1 [A. E. Raymond, et al., Phys. Rev. E, 98, 043207 (2018)]. Presented here is the analysis of the proton radiography of a high-intensity (~ 10 18 Wcm -2 ) laser driven magnetic reconnection geometry. Lastly, the path integrated magnetic fields are recovered using a “field-reconstruction algorithm” to quantify the field strengths, geometry and evolution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Avista’s Shared Energy Economy Model Pilot: A Techno-economic Assessment

As part of the second round of the Washington Clean Energy Fund, Avista Corp received a $3.5 million matching grant in support of a shared energy economy project to test the integration of energy assets–from rooftop solar and battery storage to building energy management systems–that can be shared and used for multiple purposes. The goal of this project is to demonstrate how both the customer and the utility can benefit from this shared energy economy model and demonstrate that the electric grid can become more reliable, efficient, resilient, and flexible. Pacific Northwest National Laboratory was engaged by the U.S. Department of Energy and the Washington State Department of Commerce to work with Avista in assessing the benefits of the shared energy economy model. This report documents the techno-economic assessment of the shared energy economy model, including the definition of use cases and applications, collection and preparation of data and input parameters, development of modeling and optimization methods, and case studies and analysis results.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Accelerated Modeling of Lithium Diffusion in Solid State Electrolytes using Artificial Neural Networks

Abstract Previous efforts to understand structure‐function relationships in high ionic conductivity materials for solid state batteries have predominantly relied on density functional theory (DFT‐) based ab initio molecular dynamics (MD). Such simulations, however, are computationally demanding and cannot be reasonably applied to large systems containing more than a hundred atoms. Here, an artificial neural network (ANN) is trained to accelerate the calculation of high accuracy atomic forces and energies used during such MD simulations. After carefully training a robust ANN for four and five element systems, nearly identical lithium ion diffusivities are obtained for Li 10 GeP 2 S 12 (LGPS) when benchmarking the ANN‐MD results with DFT‐MD. Applying the ANN‐MD approach, the effect of chlorine doping on the lithium diffusivity is calculated in an LGPS‐like structure and it is found that a dopant concentration of 1.3% maximizes ionic conductivity. The optimal concentration balances the competing consequences of effective atomic radii and dielectric constants on lithium diffusion and agrees with the experimental composition. Performing simulations at the resolution necessary to model experimentally relevant and optimal concentrations would be infeasible with traditional DFT‐MD. Systems that require a large number of simulated atoms can be studied more efficiently while maintaining high accuracy with the proposed ANN‐MD framework.

Rao, Karun K.↗

The Challenges of Modeling Distributed Energy Resources (DERs) as Blackstart Resources and for Volt-VAR Optimality

Modeling, testing and instituting Distributed Energy Resources (DERs) as Blackstart Resoucrces presents several challenges due to the fundamental differences between traditional black start resources (e.g., large generators) versus DERs like solar PV systems with battery storage. This paper addresses some of these key challenges. These include intermittency of coordinating DERs to provide continuous power during a black start event, especially during extended periods of cloud cover or when battery energy storage is depleted. This paper additionally addresses the collapsing voltage and stability control challenges specific to maintaining bulk power system stability during black start synchronization These physical and engineering limitations require careful engineering design, modeling and engineering to ensure that DERs can support critical loads and substations during black start events. A variety of additional challenges also exist. Additionally, there are challenges associated with feeder location and low voltage secondary system impacts on DER functions and settings. We compare typical functions and settings for DERs for power factor control and correction. We also demonstrate how voltag control via Volta-VAR power factor correction can be done

Mukherjee, Srijib↗

Comparing Macroscale and Microscale Simulations of Porous Battery Electrodes

This article describes a vertically-integrated exploration of NMC electrode rate limitations, combining experiments with corresponding macroscale (macro-homogeneous) and microscale models. Parameters common to both models were obtained from experiments or based on published results. Positive electrode tortuosity was the sole fitting parameter used in the macroscale model, while the microscale model used no fitting parameters, instead relying on microstructural domains generated from X-ray microtomography of pristine electrode material held under compression while immersed in electrolyte solution (additionally providing novel observations of electrode wetting). Macroscale simulations showed that the capacity decrease observed at higher rates resulted primarily from solution-phase diffusion resistance. This ability to provide such qualitative insights at low computational costs is a strength of macroscale models, made possible by neglecting electrode spatial details. To explore the consequences of such simplification, the corresponding, computationally-expensive microscale model was constructed. This was found to have limitations preventing quantitatively accurate predictions, for reasons that are discussed in the hope of guiding future work. Nevertheless, the microscale simulation results complement those of the macroscale model by providing a reality-check based on microstructural information; in particular, this novel comparison of the two approaches suggests a reexamination of salt diffusivity measurements.

25 ENERGY STORAGE↗

Enabling fast charging – A battery technology gap assessment

The battery technology literature is reviewed, with an emphasis on key elements that limit extreme fast charging. Key gaps in existing elements of the technology are presented as well as developmental needs. Among these needs are advanced models and methods to detect and prevent lithium plating; new positive-electrode materials which are less prone to stress-induced failure; better electrode designs to accommodate very rapid diffusion in and out of the electrode; measure temperature distributions during fast charge to enable/validate models; and develop thermal management and pack designs to accommodate the higher operating voltage.

33 ADVANCED PROPULSION SYSTEMS↗

Solid-state batteries and the critical role of interfaces

The Grand Challenge for the next generation of energy storage technologies is no longer the identification of electroactive cathode or anode materials thanks to extensive worldwide synthesis efforts along with theory and modeling like the Materials Project.1 Instead, the critical challenges revolve around assembling materials in the right architecture to achieve maximum performance and cell life at reasonable temperatures and pressures. Nowhere is this more critical than on the next generation of energy storage technologies revolving around all solid-state batteries. These batteries are the ultimate challenge for materials science requiring new ways to assemble multiple dissimilar materials such that: (1) interfaces are optimized to facilitate ion motion across the different compounds while (2) maintaining chemical stability and (3) simultaneously preserving the crystal structures of each phase during (4) large volume changes due to shuttling of lithium, at (5) room temperature and under (6) atmospheric pressure. To address these requirements will require insights and expertise from research fields outside the traditional lithium-ion battery community such as solid oxide fuel cells, synthesis science, barrier layers, interface formers, sintering, and mechanical properties.

25 ENERGY STORAGE↗

Impact of Dynamic Storage Capacity Valuation in Capacity Expansion Models

This presentation summarizes the motivation and results from the corresponding International Energy Workshop (IEW) conference paper CP-6A20-71462. Both the slide deck and paper discuss the impact of dynamic storage capacity valuation in capacity expansion models (CEMs), which are tools commonly used by power system planners, policymakers, and other stakeholders to inform decisions regarding the buildout of the electric grid. The objective of this analysis is to demonstrate the impact with a CEM of moving from a static storage capacity value (CV) to a curve-fitted approximation that captures the interactions between storage duration, PV penetrations, and storage penetration. We fit and then use those curves to calculate the battery storage CV as a function of the storage duration, storage penetration, and PV penetration. We use the Regional Energy Deployment System (ReEDS) model developed at the National Renewable Energy Laboratory (NREL) to show the impact of this improved storage capacity valuation on deployment. We also provide a curve fit equation for use by other modeling teams. This exogenous, but dynamic, approach is meant to be a first step in improving the representation of storage in CEMs.

14 SOLAR ENERGY↗

Impact of Dynamic Storage Capacity Valuation in Capacity Expansion Models: Preprint

This paper looks at the impact of dynamic storage capacity valuation in capacity expansion models (CEMs), which are tools commonly used by power system planners, policymakers, and other stakeholders to inform decisions regarding the buildout of the electric grid. The objective of this analysis is to demonstrate the impact with a CEM of moving from a static storage capacity value (CV) to a curve-fitted approximation that captures the interactions between storage duration, PV penetrations, and storage penetration. We fit and then use those curves to calculate the battery storage CV as a function of the storage duration, storage penetration, and PV penetration. We use the Regional Energy Deployment System (ReEDS) model developed at the National Renewable Energy Laboratory (NREL) to show the impact of this improved storage capacity valuation on deployment. We also provide a curve fit equation for use by other modeling teams. This exogenous, but dynamic, approach is meant to be a first step in improving the representation of storage in CEMs.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Galvanostatic Intermittent Titration and Performance Based Analysis of LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathode

Galvanostatic intermittent titration technique (GITT) - a popular method for characterizing kinetic and transport properties of battery electrodes - is predicated on the proper evaluation of electrode active area. LiNi 0.5044 Co 0.1986 Mn 0.2970 O 2 (NCM523) material exhibits a complex morphology in which sub-micron primary particles aggregate to form secondary particle agglomerates. Our work proposes a new active area formulation for primary/secondary particle agglomerate materials to better mimic the morphology of NCM532 electrodes. Furthermore, this formulation is then coupled with macro-homogeneous models to simulate GITT and half-cell performance of NCM523 electrodes. Subsequently, the model results are compared against the experimental results to refine the area formulation. A single parameter, the surface roughness factor, is proposed to mimic the change in interfacial area, diffusivity and exchange current density simultaneously and detailed modeling results are presented to provide valuable insights into the efficacy of the formulation.

25 ENERGY STORAGE↗

A Review of Existing and Emerging Methods for Lithium Detection and Characterization in Li-Ion and Li-Metal Batteries

Whether attempting to eliminate parasitic Li metal plating on graphite (and other Li-ion anodes) or enabling stable, uniform Li metal formation in ‘anode-free’ Li battery configurations, the detection and characterization (morphology, microstructure, chemistry) of Li that cannot be reversibly cycled is essential to understand the behavior and degradation of rechargeable batteries. In this review, various approaches used to detect and characterize the formation of Li in batteries are discussed. Each technique has its unique set of advantages and limitations, and works towards solving only part of the full puzzle of battery degradation. Going forward, multimodal characterization holds the most promise towards addressing two pressing concerns in the implementation of the next generation of batteries in the transportation sector (viz. reducing recharging times and increasing the available capacity per recharge without sacrificing cycle life). Such characterizations involve combining several techniques (experimental- and/or modeling-based) in order to exploit their respective advantages and allow a more comprehensive view of cell degradation and the role of Li metal formation in it. Additionally, it is also discussed which individual techniques, or combinations thereof, can be implemented in real-world battery management systems on-board electric vehicles for early detection of potential battery degradation that would lead to failure.

25 ENERGY STORAGE↗

Lithium-Ion Batteries with Safer Current Collectors

The US Department of Energy’s Oak Ridge National Laboratory and Soteria Battery Innovation Group collaborated to develop a metallized polymer film as a current collector for lithium-ion batteries and design slit patterns for electrodes to improve battery safety. The metallized polymer film serves as a fuse that will break under high temperature resulting from a short circuit. Consequently, the short circuit will be broken and the heat generated from the short circuit will be alleviated to avoid thermal runaway. The electrodes with slit patterns are expected to be broken into small segments upon mechanical impact, which can isolate the damaged electrodes from the rest. Thus, the heat generation associated with the mechanical impact will be reduced, along with the likelihood of thermal runaway. This effort aimed to improve lithium-ion battery safety by replacing traditional metal foils with metallized polymer films as current collector and introducing slit patterns to battery electrodes. The metallized polymer films were polyethylene terephthalate with a thin metal (aluminum for cathodes and copper for anodes) coating on both sides. Slit patterns with various geometries and dimensions were designed via simulation. Temperature distribution on cells with electrodes with and without slit patterns was also simulated via nemerical modeling. Electrodes on traditional metal foils and metallized polymer films were coated via a pilot-scale slot-die coater at the US Department of Energy Battery Manufacturing Facility at Oak Ridge National Laboratory. The electrodes were calendered to 35% porosity and punched out with and without slit patterns. Pouch cells were assembed with the electrodes inside a dry room for electrochemical and safety testing. Electrodes coated on metallized polymer films exhibited comparable electrochemical performance to their counterparts coated on traditional metal foils. They also showed improved safety in nail penetration and indentation tests.

25 ENERGY STORAGE↗

Clean Energy Transition for Transportation Systems: Modeling Implications

Transportation is currently the least-diversified energy demand sector, with over 90% of energy use coming from petroleum. As a result, transportation recently became the largest source of GHG emissions in the U.S. and mobility needs for passenger and freight are growing rapidly. However, after over a century of petroleum dominance, new disruptive technologies and business models offer a pathway to decarbonize the sector. Transportation is at a turning point. On the horizon lies a future where affordable and abundant renewable electricity can be used to power cost-competitive battery electric vehicles (EVs) and produce energy-dense low-carbon fuels enabling to fully decarbonize transportation systems across all modes. Exploring the clean energy transition for the multitude of different transportation systems requires new analytical modeling and approaches. This talk reviewed current work at the National Renewable Energy Laboratory (NREL) to develop and use innovative tools and analytics approaches to inform the transformation to a sustainable mobility future and the integration of transportation systems with the broader energy sector.

ADVANCED PROPULSION SYSTEMS↗

Using Radial Basis Functions to Approximate Battery Differential Capacity and Differential Voltage

As part of the Department of Energy’s Applied Battery Research Program, lithium-ion cells of various sizes and chemistries are aged with periodic reference performance tests to ascertain degradation rates. The reference tests included a very slow discharge and charge based on a constant current equal to 1/25th of the rated capacity to elucidate the true electrochemical capacity of the cell. A differential analysis of these data helps to identify the individual kinetic and thermodynamic contributions of the anode and cathode. However, differential curves are very noisy, and previous smoothing methods included simple data reduction and moving averages. This paper introduces an alternative method of finding the differential voltage and differential capacity curves based on radial basis functions. The voltage profile is fit with a number of Gaussian curves, and the resulting model is differentiated. This approach also has the added advantage of assessing model uncertainty based on a bootstrap analysis. The radial basis function method was successfully applied to various lithium-ion chemistries tested under the Applied Battery Research Program. The resulting differential capacity and differential voltage curves were generally smoother than the corresponding curves found by previous methods and also showed little variance, indicating a good model fit. These results imply that the radial basis function technique is a more robust tool for assessing differential data.

25 ENERGY STORAGE↗