Search NASA⌕ Search

SEARCH · Search NASA

Results for “Component effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Apparatus for measuring the force of gravity on freely falling electrons

An apparatus and data analysis technique for measuring the gravitational force on freely falling electrons are described. The measurement required that all forces acting on the electrons be uniform and measurable to about ten to the negative 11th power eV/m. The electrical force along the axis of the 5-cm-diam, vertical copper tube used in the experiment was found to be about six times ten to the negative 11th power eV/m when the tube was cooled to 4.2 K. Forces on electrons due to magnetic field gradients were reduced well below the electrical ones by selecting only ground state electrons for measurement. The absence, at 4.2 K, of much stronger electric fields, which were expected to arise from the patch effect and from differential lattice components, contrasts strongly with measurements of electric fields near metal surfaces made at room temperature.

Witteborn, F. C.↗

Direct effects protection

Protection of an aircraft and each of its various systems against the direct effects of lightning were analyzed. Components located in different sections of the aircraft were individually examined since they are likely to experience different degrees of susceptibility to lightning, and may be vulnerable to different components of the lightning flash. The basic steps to be followed in establishing lightning protection were presented by discussing the varieties of arc entry and current flow-through damage. The lightning-strike zones and lightning current environments are established, since environmental conditions in the zones are those under which specific protective measures must perform. Airworthiness regulations which apply to lightning protection are cited.

Franklin A Fisher↗

Characteristics of wing/body/tail configurations

Package of computer programs determine longitudinal aerodynamic characteristics of wing/body/tail combinations including effects of nonlinear aerodynamics of components and interference between components.

Dillenius, M. F. E.↗

Fuel cell on-site integrated energy system parametric analysis of a residential complex

A parametric energy-use analysis was performed for a large apartment complex served by a fuel cell on-site integrated energy system (OS/IES). The variables parameterized include operating characteristics for four phosphoric acid fuel cells, eight OS/IES energy recovery systems, and four climatic locations. The annual fuel consumption for selected parametric combinations are presented and a breakeven economic analysis is presented for one parametric combination. The results show fuel cell electrical efficiency and system component choice have the greatest effect on annual fuel consumption; fuel cell thermal efficiency and geographic location have less of an effect.

Simons, S. N.↗

Intertropical convergence zone ozone profiles from the Learjet ozone analyzer

An ozone analyzer operated as part of the sampling package aboard the NASA Learjet on each flight in the Panama ITCZ (Intertropical Convergence Zone) experiment. The measurement program was not successful because of instrument failure, apparently due to high humidity effects on one or more components of the ozone sensing instrument. A brief description of the experimental installation and some comments about an apparent correlation between very low ozone concentrations and cloud layers at altitude are presented.

Robinson, E.↗

Development of fire-resistant, low smoke generating, thermally stable end items for commercial aircraft and spacecraft using a basic polyimide resin

Experimental data pertinent to flexible resilient foams, low density wall panels, high strength floor panels and thermal acoustical insulation are presented. An evaluation of the effect of the heterocyclic diamine component on the compression set of the foams was carried out. Processes and compositions for fabricating wall panels were evaluated. Thermal acoustical polyimide materials were developed to replace conventional glass batting insulation. To reduce the thermal stresses and improve the burn through resistance, cross linked polyimide foams were developed but not evaluated.

Gagliani, J.↗

Preliminary study of advanced turboprop and turboshaft engines for light aircraft

The effects of engine configuration, advanced component technology, compressor pressure ratio and turbine rotor-inlet temperature on such figures of merit as vehicle gross weight, mission fuel, aircraft acquisition cost, operating, cost and life cycle cost are determined for three fixed- and two rotary-wing aircraft. Compared with a current production turboprop, an advanced technology (1988) engine results in a 23 percent decrease in specific fuel consumption. Depending on the figure of merit and the mission, turbine engine cost reductions required to achieve aircraft cost parity with a current spark ignition reciprocating (SIR) engine vary from 0 to 60 percent and from 6 to 74 percent with a hypothetical advanced SIR engine. Compared with a hypothetical turboshaft using currently available technology (1978), an advanced technology (1988) engine installed in a light twin-engine helicopter results in a 16 percent reduction in mission fuel and about 11 percent in most of the other figures of merit.

Knip, G.↗

Band-Pass Amplifier Without Discrete Reactance Elements

Inherent or "natural" device capacitance exploited. Band-Pass Circuit has input impedance of equivalent circuit at frequencies much greater than operational-amplifier rolloff frequency. Apparent inductance and capacitance arise from combined effects of feedback and reactive component of amplifier gain in frequency range.

Kleinberg, L.↗

Apparatus for and method of compensating dynamic unbalance

An apparatus to stabilize a fine platform that carries a parabolic reflecting dish, utilized in connection with the large aperture, multichannel microwave radiometer, is discussed. It provides compensation for dynamic unbalance imparted to a fixed body by a shaft about which the rotating body rotates. Force components exerted on the fixed body by the rotating body in a plane at right angles to the axis are determined. In response to the determined force components, the rotational speed and effective direction of mass means mounted on the rotating body are controlled. The mass means has an effective axis of rotation in a plane at right angles to the longitudinal axis.

Hrastar, J. A.↗

Analytic structure of cosmic radio jets - A preliminary investigation

The structure of the steady radio jet is discussed by analyzing the relativistic Euler equation in the case where surfaces of constant angular momentum coincide with surfaces of constant angular velocities. A closed analytic expression for the potential and other physical quantities is derived in a general stationary background geometry. The effect of the angular momentum component and the radial momentum component on the structure of the jet is studied in detail for Schwarzschild geometry. The jets are found to be pressure-confined and angular momentum-supported. The possibility of obtaining arbitrarily well-collimated jets very near to a black hole is discussed.

Chakrabarti, S. K.↗

Stimulated Raman up-conversion of electromagnetic waves by a gyrating electron beam

A gyrating electron beam supports negative energy modes near the harmonics of electron-cyclotron frequency. An electromagnetic wave passing through such a beam parametrically up-converts into high-frequency electromagnetic modes separated from the pump frequency by the electron-cyclotron harmonics. The growth rate for this process varies directly as the oscillatory velocity of beam electrons caused by the pump and as square root of the beam density. It has a maximum at values of scattering angle close to 180 deg and is also implicitly dependent on the beam veocity and the cyclotron frequency of electrons. The effect of a cold electron component is to reduce the growth rate.

Sharma, O. P.↗

New results on the generation of broadband electrostatic waves in the magnetotail

The theory of the generation of broadband electrostatic noise (BEN) in the magnetotail is extended through numerical solution of the dispersion relation under conditions that exist in the plasma sheet boundary layer. It is found that the low-frequency portion of the spectrum has a broad angular spectrum but a fairly sharp peak near 75 deg with respect to the magnetic field, while the high-frequency portion has a narrower angular spectrum that is strongly concentrated along the magnetic field line. These results are in excellent agreement with observations of the broadband wave spectrum and a recent measurement of the propagation direction. The effect of a second cold component of electrons is analyzed, and it is found that it can increase the upper cutoff frequency of BEN to the observed value at about the plasma frequency.

Grabbe, C. L.↗

Weibull Distribution From Interval Inspection Data

Most likely failure sequence assumed. Memorandum discusses application of Weibull distribution to statistics of failures of turbopump blades. Is generalization of well known exponential random probability distribution and useful in describing component-failure modes including aging effects. Parameters found from experimental data by method of maximum likelihood.

Rheinfurth, Mario H.↗

An application of artificial intelligence theory to reconfigurable flight control

Artificial intelligence techniques were used along with statistical hpyothesis testing and modern control theory, to help the pilot cope with the issues of information, knowledge, and capability in the event of a failure. An intelligent flight control system is being developed which utilizes knowledge of cause and effect relationships between all aircraft components. It will screen the information available to the pilots, supplement his knowledge, and most importantly, utilize the remaining flight capability of the aircraft following a failure. The list of failure types the control system will accommodate includes sensor failures, actuator failures, and structural failures.

Handelman, David A.↗

Pressure distributions from subsonic tests of an advanced laminar-flow-control wing with leading- and trailing-edge flaps

An unswept, semispan wing model equipped with full-span leading- and trailing-edge flaps was tested in the Langley 14- by 22-Foot Subsonic Tunnel to determine the effect of high-lift components on the aerodynamics of an advanced laminar-flow-control (LFC) airfoil section. Chordwise pressure distributions near the midsemispan were measured for four configurations: cruise, trailing-edge flap only, and trailing-edge flap with a leading edge Kreuger flap of either 0.10 or 0.12 chord. Part 1 of this report presents a representative sample of the plotted pressure distribution data for each configuration tested. Part 2 (under separate cover) presents the entire set of plotted and tabulated pressure distribution data. The data are presented without analysis.

Applin, Zachary T.↗

Pressure distributions from subsonic tests of an advanced laminar-flow-control wing with leading- and trailing-edge flaps

An unswept, semispan wing model equipped with full-span leading- and trailing-edge flaps was tested in the Langley 14- by 22-Foot Subsonic Tunnel to determine the effect of high-lift components on the aerodynamics of an advanced laminar-flow-control (LFC) airfoil section. Chordwise pressure distributions near the midsemispan were measured for four configurations: cruise, trailing-edge flap only, and trailing-edge flap with a leading-edge Krueger flap of either 0.10 or 0.12 chord. Part 1 of this report (under separate cover) presents a representative sample of the plotted pressure distribution data for each configuration tested. Part 2 presents the entire set of plotted and tabulated pressure distribution data. The data are presented without analysis.

Applin, Zachary T.↗

The opportunities for space biology research on the Space Station

The goals of space biology research to be conducted aboard the Space Station in 1990s include long-term studies of reproduction, development, growth, physiology, behavior, and aging in both animals and plants. They also include studies of the mechanisms by which gravitational stimuli are sensed, processed, and transmitted to a responsive site, and of the effect of microgravity on each component. The Space Station configuration will include a life sciences research facility, where experiment cyles will be on a 90-day basis (since the Space Station missions planned for the 1990s call for 90-day intervals). A modular approach is taken to accomodate animal habitats, plant growth chambers, and other specimen holding facilities; the modular habitats would be transportable between the launch systems, habitat racks, a workbench, and a variable-gravity centrifuge (included for providing artificial gravity and accurately controlled acceleration levels aboard Space Station).

Ballard, Rodney W.↗

Space Station - A focus for the development of structural dynamics scale model technology for large flexible space structures

The paper discusses the scale model technology being developed at the NASA Langley Research Center in support of the development of structural dynamic prediction methods for large flexible space structures. Space Station is used as a focus. The Dynamic Scale Model Technology (DSMT) Program is described; results of the effect of scaling Space Station components are presented; and supporting scale model technology development activities are described and results presented. The conceptual design of a hybrid-scale Pathfinder model for developing test techniques and suspension methods is also discussed, and a summary of the broad application of the scale model technology being developed is presented.

Letchworth, Robert↗