Search NASA⌕ Search

SEARCH · Search NASA

Results for “Digital Components”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Onboard Signal Processing: Wave of the Future for Planetary Radio Science?

Future spacecraft-based radio observations of planetary surfaces, rings, and atmospheres could significantly benefit from recent technological advances in real-time digital signal processing (DSP) hardware. Traditionally, the radio observations have been carried out in a 'down link' configuration in which about 20-W spacecraft transmitted RF power illuminates the target of interest and the perturbed signal is collected at an Earth receiving station. The down link configuration was dictated by the large throughput of received data, corresponding to a relatively large recording band width (about 50 kHz) needed to capture the coherent and scattered signal components in the presence of trajectory, ephemeris, and measurement uncertainties. An alternative 'up link' configuration in which powerful Earth-based radio transmitters (20-200 kW) are used to illuminate the target and data are recorded on board a spacecraft could enhance the measurements' signal-to-noise ratio by a factor of about 1000, allowing a quantum leap in scientific capabilities. Various aspects of alternative signal processing technologies are discussed.

Marouf, E. A.↗

Digital Particle Image Velocimetry (DPIV) Used for Space-Time Correlations in Nozzle Flow

An optical measurement technique known as Digital Particle Image Velocimetry (DPIV) was used previously to characterize the first- and second-order statistical properties of both cold and hot jet flows from externally mixed nozzles in NASA Glenn Research Center's Nozzle Acoustic Test Rig. In this technique, an electronic camera records particles entrained in a flow as a laser light sheet is pulsed at two instances in time. Correlation processing of the recorded particle image pairs yields the two-component velocity field across the imaged plane of the flow. The information acquired using DPIV is being used to improve our understanding of the decay of turbulence in jet flows-a critical element for understanding the acoustic properties of the flow. Recently, two independent DPIV systems were installed in Glenn's Small Hot Jet Acoustic Rig, enabling multiplane correlations in time and space. The data were collected over a range of different Mach numbers and temperature ratios. DPIV system 1 was fixed to a large traverse rig, and DPIV system 2 was mounted on a small traverse system mounted on the large traverse frame. The light sheets from the two DPIV systems were aligned to lie in the same axial plane, with DPIV system 2 being independently traversed downstream along the flow direction. For each measurement condition, the DPIV systems were started at a fully overlapping orientation. A polarization separation technique was used to avoid cross-talk between the two systems. Then, the DPIV systems fields were shifted axially apart, in successively increasing steps. The downstream DPIV system 2 was triggered at a short time delay after the upstream DPIV system 1, where the time delay was proportional to the convective flow velocity in the shear layer of the jet flow and the axial separation of the two DPIV systems. The acquired data were processed to obtain the instantaneous velocity vector maps over a range of time delays and spatial separations. The velocity fields from the different DPIV systems were then cross-correlated to determine the degree of correlation remaining in the flow as the downstream convection distance was increased. The new data provide Lagrangian measurements of the convective turbulent structures in the shear layer of an exhaust nozzle. These measurements, obtained in both cold and hot flows, will be used to validate and correct models for space-time velocity correlations-long a missing key to predicting jet noise.

Wernet, Mark P.↗

Reconfiguration of Analog Electronics for Extreme Environments: Problem or Solution?

This paper argues in favor of adaptive reconfiguration as a technique to expand the operational envelope of analog electronics for extreme environments (EE). In addition to hardening-by-process and hardening-by-design, "hardening-by-reconfiguration", when applicable, could be used to mitigate drifts, degradation, or damage on electronic devices (chips) in EE, by using re-configurable devices and an adaptive self-reconfiguration of their circuit topology. Conventional circuit design exploits device characteristics within a certain temperature/radiation range; when that is exceeded, the circuit function degrades. On a reconfigurable device, although component parameters change in EE, as long as devices still operate, albeit degraded, a new circuit design, suitable for new parameter values, may be mapped into the reconfigurable structure to recover the initial circuit function. Partly degraded resources are still used, while completely damaged resources are bypassed. Designs suitable for various environmental conditions can be determined prior to operation or can be determined in-situ, by adaptive reconfiguration algorithms running on built-in digital controllers. Laboratory demonstrations of this technique were performed by JPL in several independent experiments in which bulk CMOS reconfigurable devices were exposed to, and degraded by, low temperatures (approx. 196 C), high temperatures (approx.300 C) or radiation (300kRad TID), and then recovered by adaptive reconfiguration using evolutionary search algorithms. Taking this technology from Technology Readiness Level (TRL) 3 to TRL 5 is the target of a current NASA project.

Field Programmable Transistor Array (FPTA)↗

High-Precision Shape Control of In-Space Deployable Large Membrane/Thin-Shell Reflectors

This innovation has been developed to improve the resolutions of future spacebased active and passive microwave antennas for earth-science remote sensing missions by maintaining surface figure precisions of large membrane/thin-shell reflectors during orbiting. The intention is for these sensing instruments to be deployable at orbit altitudes one or two orders of magnitude higher than Low Earth Orbit (LEO), but still being able to acquire measurements at spatial resolution and sensitivity similar to those of LEO. Because active and passive microwave remote sensors are able to penetrate through clouds to acquire vertical profile measurements of geophysical parameters, it is desirable to elevate them to the higher orbits to obtain orbital geometries that offer large spatial coverage and more frequent observations. This capability is essential for monitoring and for detailed understanding of the life cycles of natural hazards, such as hurricanes, tropical storms, flash floods, and tsunamis. Major components of this high-precision antenna-surface-control system include a membrane/thin shell reflector, a metrology sensor, a controller, actuators, and corresponding power amplifier and signal conditioning electronics (see figure). Actuators are attached to the back of the reflector to produce contraction/ expansion forces to adjust the shape of the thin-material reflector. The wavefront-sensing metrology system continuously measures the surface figure of the reflector, converts the surface figure to digital data and feeds the data to the controller. The controller determines the control parameters and generates commands to the actuator system. The flexible, piezoelectric polymer actuators are thus activated, providing the control forces needed to correct any distortions that exist in the reflector surface. Piezoelectric polymer actuators are very thin and flexible. They can be implemented on the back of the membrane/thin-shell reflector without introducing significant amounts of mass or stiffness to the reflector. They can be rolled up or folded to accommodate the packaging needed for launch. An analytical model of the system, which includes the membrane reflector, actuator, and controller has been developed to investigate the functionality of this control system on a 35-meter-diameter membrane reflector. The performance of this system under external disturbances such as in space thermal loads and W-error due to inflation has been investigated. A subscale breadboard has been developed, and the functionality of this control concept has been demonstrated by this breadboard.

Watkins, Ronald↗

Infrastructure-Based Cooperative Perception at a Traffic Intersection: Overview and Challenges

Traffic intersections are crucial and challenging nodes in transportation networks where multiple lanes of vehicles and pedestrians converge. About one-quarter of traffic fatalities and about one-half of all traffic injuries in the United States happen at traffic intersections . Effective management of these intersections is important to ensure safety and efficiency of all users - vehicles, pedestrians, cyclists, and vulnerable road users (VRUs). With advancements in sensor perception technologies such as radar, light detection and ranging (lidar), and cameras, traffic intersections are developing into dynamic and data-rich environments. By using these data to create a real-time digital twin, we can enable real-time data-driven decision making and a range of applications such as sharing perception information to connected vehicles (CVs) and connected autonomous vehicles (CAVs), safety affirmative signaling, and curb optimizing to improve efficiency and enhance safety.This paper presents an overview of the concept and examines the challenges involved in implementing an infrastructure-based cooperative perception engine at a traffic intersection. In addition to outlining the physical components, this study also addresses important challenges involved in a multi-sensor system. We present results from deploying the National Renewable Energy Laboratory's (NREL's) Infrastructure Perception and Control (IPC) mobile trailer at a traffic intersection in the city of Colorado Springs, Colorado, USA that employed multiple radars and lidars to capture the data. This study provides necessary practical learning for the Cooperative Driving Automation (CDA) and traffic engineering communities for next-generation infrastructure-based cooperative perception that promises improvements in signal control for optimized traffic flow, among other applications, and documents findings for ongoing research and development efforts in other areas.

ADVANCED PROPULSION SYSTEMS,MATHEMATICS AND COMPUT↗

A Discrete Component Low-Noise Preamplifier Readout for a Linear (1x16) SiC Photodiode Array

A compact, low-noise and inexpensive preamplifier circuit has been designed and fabricated to optimally readout a common cathode (1x16) channel 4H-SiC Schottky photodiode array for use in ultraviolet experiments. The readout uses an operational amplifier with 10 pF capacitor in the feedback loop in parallel with a low leakage switch for each of the channels. This circuit configuration allows for reiterative sample, integrate and reset. A sampling technique is given to remove Johnson noise, enabling a femtoampere level readout noise performance. Commercial-off-the-shelf acquisition electronics are used to digitize the preamplifier analogue signals. The data logging acquisition electronics has a different integration circuit, which allows the bandwidth and gain to be independently adjusted. Using this readout, photoresponse measurements across the array between spectral wavelengths 200 nm and 370 nm are made to establish the array pixels external quantum efficiency, current responsivity and noise equivalent power.

low-noise preamplifier↗

A Subgrid Approach for Modeling Microtopography Effects on Overland Flow

Microtopography, or heterogeneities in the elevation across scales much smaller than the domain of interest, plays a critical role in surface water retention, surface/subsurface interactions, and runoff. Resolving microtopographic influences on flow requires high–resolution simulations, which are computationally demanding even when considering the surface system in isolation and even more so when surface flow is one component in integrated simulations that couple surface flow with unsaturated subsurface flow. There is thus significant motivation for models that allow the effects of subgrid microtopography to be better represented. Subgrid models modify coarsened models to capture the microtopography–induced nonlinear effects on hydrologic processes. We present a subgrid model that alters the water storage and flow terms in the diffusion wave equation for surface flow. Stochastically generated microtopography with strongly contrasting spatial structure, high–resolution digital elevation maps from a polygonal tundra site on the North Slope of Alaska and a hummocky microtopography from a field site in Northern Minnesota are used to assess the accuracy and applicability of the subgrid model to disparate landscapes. Approaches for determining subgrid model parameters are tested and simulation results using the subgrid model are compared to benchmark fine–scale simulations and to coarse simulations that ignore microtopography. Our findings confirm that a properly parameterized subgrid model greatly improves the coarse–scale representation of hydrographs and total water content in the system. Furthermore, using the polygonal tundra example, we propose and test a strategy for moving to application–relevant spatial scales by combining microtopography classification and a few fine–scale simulations on small subdomains.

54 ENVIRONMENTAL SCIENCES↗

FRAGILE BINARY CANDIDATES IN THE SDSS DR8 SPECTROSCOPIC ARCHIVE

We present a catalog of 80 very wide fragile binary candidates (projected separations >10,000 AU) from the Sloan Digital Sky Survey Data Release Eight spectral archive. The pairs were selected based on proper motion, radial velocity, metallicity, and photometric parallax criteria. The angular separations of these pairs range from 3'' to 250''. The peak in the metallicity distribution of these pairs is about -0.5 dex of solar metallicity. Space motions and reduced proper motion diagrams indicate that all these pairs are members of the disk. The chromospheric activity index S{sub HK} of each component in 38 binary candidates having spectra of high signal-to-noise ratio and member stars of three open clusters (NGC 2420, M67, and NGC 6791) were measured. The S{sub HK} versus color relation for these binary candidates is consistent with the trend seen in these open clusters. The ages implied by this relation suggest that fragile wide pairs can survive longer than 8 Gyr.

79 ASTRONOMY AND ASTROPHYSICS↗

TU-A-18C-01: ACR Accreditation Updates in CT, Ultrasound, Mammography and MRI

A goal of an imaging accreditation program is to ensure adequate image quality, verify appropriate staff qualifications, and to assure patient and personnel safety. Currently, more than 35,000 facilities in 10 modalities have been accredited by the American College of Radiology (ACR), making the ACR program one of the most prolific accreditation options in the U.S. In addition, the ACR is one of the accepted accreditations required by some state laws, CMS/MIPPA insurance and others. Familiarity with the ACR accreditation process is therefore essential to clinical diagnostic medical physicists. Maintaining sufficient knowledge of the ACR program must include keeping up-to-date as the various modality requirements are refined to better serve the goals of the program and to accommodate newer technologies and practices. This session consists of presentations from authorities in four ACR accreditation modality programs, including magnetic resonance imaging, mammography, ultrasound, and computed tomography. Each speaker will discuss the general components of the modality program and address any recent changes to the requirements. Learning Objectives: To understand the requirements of the ACR MR accreditation program. The discussion will include accreditation of whole-body general purpose magnets, dedicated extremity systems well as breast MRI accreditation. Anticipated updates to the ACR MRI Quality Control Manual will also be reviewed. To understand the current ACR MAP Accreditation requirement and present the concepts and structure of the forthcoming ACR Digital Mammography QC Manual and Program. To understand the new requirements of the ACR ultrasound accreditation program, and roles the physicist can play in annual equipment surveys and setting up and supervising the routine QC program. To understand the requirements of the ACR CT accreditation program, including updates to the QC manual as well as updates through the FAQ process.

60 APPLIED LIFE SCIENCES↗

Mental workload measurement: Event-related potentials and ratings of workload and fatigue

Event-related potentials were elicited when a digitized word representing a pilot's call-sign was presented. This auditory probe was presented during 27 workload conditions in a 3x3x3 design where the following variables were manipulated: short-term load, tracking task difficulty, and time-on-task. Ratings of workload and fatigue were obtained between each trial of a 2.5-hour test. The data of each subject were analyzed individually to determine whether significant correlations existed between subjective ratings and ERP component measures. Results indicated that a significant number of subjects had positive correlations between: (1) ratings of workload and P300 amplitude, (2) ratings of workload and N400 amplitude, and (3) ratings of fatigue and P300 amplitude. These data are the first to show correlations between ratings of workload or fatigue and ERP components thereby reinforcing their validity as measures of mental workload and fatigue.

Biferno, M. A.↗

Near-toll quality digital speech transmission in the mobile satellite service

This paper discusses system considerations for near-toll quality digital speech transmission in a 5 kHz mobile satellite system channel. Tradeoffs are shown for power performance versus delay for a 4800 bps speech compression system in conjunction with a 16 state rate 2/3 trellis coded 8PSK modulation system. The suggested system has an additional 150 ms of delay beyond the propagation delay and requires an E(b)/N(0) of about 7 dB for a Ricean channel assumption with line-of-sight to diffuse component ratio of 10 assuming ideal synchronization. An additional loss of 2 to 3 dB is expected for synchronization in fading environment.

Townes, S. A.↗

Elements of the Chicxulub Impact Structure as Revealed in SRTM and Surface GPS Topographic Data

Pope et al. [1] utilized the elevations from the Petroleos Mexicanos (PEMEX) gravity data files to show that the main component of the surface expression of the Chicxulub Impact Structure is a roughly semi-circular, lowrelief depression about 90 km in diameter. They also identified other topographic features and the elements of the buried impact, which possibly led to the development of these features. These are summarized in Table 1. Kinsland et al. [2] presented a connection between these topographic anomalies, small gravity anomalies and buried structure of the impact. Very recently we have acquired digital topography data from NASA s Shuttle Radar Topography Mission (SRTM). Our subset covers 6 square degrees from 20deg N 91degW to 22deg N 88degW (corner to corner) with a pixel size of about 90m. This area includes all of the identified portion of the crater on land.

Kinsland, Gary L.↗

IMT-2000 Satellite Standards with Applications to Mobile Air Traffic Communications Networks

The International Mobile Telecommunications - 2000 (IMT-2000) standard and more specifically the Satellite component of it, is investigated as a potential alternative for communications to aircraft mobile users en-route and in terminal area. Its application to Air Traffic Management (ATM) communication needs is considered. A summary of the specifications of IMT-2000 satellite standards are outlined. It is shown via a system research analysis that it is possible to support most air traffic communication needs via an IMT-2000 infrastructure. This technology can compliment existing, or future digital aeronautical communications technologies such as VDL2, VDL3, Mode S, and UAT.

Shamma, Mohammed A.↗

Space Telecommunications Radio Systems (STRS) Hardware Architecture Standard: Release 1.0 Hardware Section

This report defines a hardware architecture approach for software-defined radios to enable commonality among NASA space missions. The architecture accommodates a range of reconfigurable processing technologies including general-purpose processors, digital signal processors, field programmable gate arrays, and application-specific integrated circuits (ASICs) in addition to flexible and tunable radiofrequency front ends to satisfy varying mission requirements. The hardware architecture consists of modules, radio functions, and interfaces. The modules are a logical division of common radio functions that compose a typical communication radio. This report describes the architecture details, the module definitions, the typical functions on each module, and the module interfaces. Tradeoffs between component-based, custom architecture and a functional-based, open architecture are described. The architecture does not specify a physical implementation internally on each module, nor does the architecture mandate the standards or ratings of the hardware used to construct the radios.

Reinhart, Richard C.↗

Image Segmentation, Registration, Compression, and Matching

A novel computational framework was developed of a 2D affine invariant matching exploiting a parameter space. Named as affine invariant parameter space (AIPS), the technique can be applied to many image-processing and computer-vision problems, including image registration, template matching, and object tracking from image sequence. The AIPS is formed by the parameters in an affine combination of a set of feature points in the image plane. In cases where the entire image can be assumed to have undergone a single affine transformation, the new AIPS match metric and matching framework becomes very effective (compared with the state-of-the-art methods at the time of this reporting). No knowledge about scaling or any other transformation parameters need to be known a priori to apply the AIPS framework. An automated suite of software tools has been created to provide accurate image segmentation (for data cleaning) and high-quality 2D image and 3D surface registration (for fusing multi-resolution terrain, image, and map data). These tools are capable of supporting existing GIS toolkits already in the marketplace, and will also be usable in a stand-alone fashion. The toolkit applies novel algorithmic approaches for image segmentation, feature extraction, and registration of 2D imagery and 3D surface data, which supports first-pass, batched, fully automatic feature extraction (for segmentation), and registration. A hierarchical and adaptive approach is taken for achieving automatic feature extraction, segmentation, and registration. Surface registration is the process of aligning two (or more) data sets to a common coordinate system, during which the transformation between their different coordinate systems is determined. Also developed here are a novel, volumetric surface modeling and compression technique that provide both quality-guaranteed mesh surface approximations and compaction of the model sizes by efficiently coding the geometry and connectivity/topology components of the generated models. The highly efficient triangular mesh compression compacts the connectivity information at the rate of 1.5-4 bits per vertex (on average for triangle meshes), while reducing the 3D geometry by 40-50 percent. Finally, taking into consideration the characteristics of 3D terrain data, and using the innovative, regularized binary decomposition mesh modeling, a multistage, pattern-drive modeling, and compression technique has been developed to provide an effective framework for compressing digital elevation model (DEM) surfaces, high-resolution aerial imagery, and other types of NASA data.

Yadegar, Jacob↗

Statistical analysis of Al III and C III ] emission lines as virial black hole mass estimators in quasars

We test the usefulness of the intermediate ionisation lines Al IIIλ1860 and C III]λ1909 as reliable virial mass estimators for quasars. We identified a sample of 309 quasars from the Sloan Digital Sky Survey Data Release 16 (SDSS DR16) in the redshift range 1.2 ≤ z ≤ 1.4 that have [O II]λ3728 recorded on the same spectrum as Al IIIλ1860, Si III]λ1892, and C III]λ1909. We set the systemic quasar redshift using careful measurements of [O II]λ3728. We then classified the sources as Population A (Pop. A), extreme Population A (Pop. xA), and Population B (Pop. B), and analysed the 1900 Å blend using multi-component models to look for systematic line shifts of Al IIIλ1860 and C III]λ1909 along the quasar main sequence. We do not find significant shifts of the Al IIIλ1860 line peak in Pop. B or in the vast majority of Pop. A. For Pop. xA, a small median blueshift of -250 km s -1 was observed, motivating a decomposition of the Al III line profile into a virialised component centred at rest frame and a blueshifted component for an outflow emission. For Pop. B objects, we proved the empirical necessity to fit a redshifted very broad component, clearly seen in C III], and analysed the physical implications on a Pop. B composite spectrum using CLOUDY simulations. We find consistent black hole mass estimations using Al III and C III] as virial estimators for the bulk of Pop. A. Al III (and even C III]) is a reliable virial black hole mass estimator for Pop. A and Pop. B objects. The Pop. xA sources deserve special attention due to the significant blueshifted excess observed in the line profile of Al III, although it is not as large as the excess observed in C IVλ1549.

79 ASTRONOMY AND ASTROPHYSICS↗

Extended fast-ion D-alpha diagnostic on DIII-D

A fast-ion deuterium-alpha (FIDA) diagnostic, first commissioned on DIII-D in 2005, relies on Doppler-shifted light from charge-exchange between beam neutrals and energetic ions. The second generation (2G) system was installed on DIII-D in 2009. Its most obvious improvement is the spatial coverage with 11 active in-beam and three passive off-beam views; the latter allows for simultaneous monitoring of the background signal. Providing extended coverage in fast-ion velocity space, the new views possess a more tangential component with respect to the toroidal field compared to their first generation counterparts. Each viewing chord consists of a bundle of three 1.5 mm core fibers to maximize light gathering. For greater throughput, fast f/1.8 optical components are used throughout. The signal is transmitted via fiber optics to a patch panel, so the user is able to choose the detector. FIDA was originally installed with a spectrometer and charge-coupled device (CCD) camera to monitor the full D{sub {alpha}} spectrum for two spatial views. 2G adds another spectrometer and CCD that monitor the blue-shifted wing for six spatial views at 1 kHz. In addition, a photomultiplier tube and fast digitizer provide wavelength-integrated signals at 1 MHz for eight spatial views.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A LARGE SYSTEMATIC SEARCH FOR CLOSE SUPERMASSIVE BINARY AND RAPIDLY RECOILING BLACK HOLES

We have carried out a systematic search for subparsec supermassive black hole (BH) binaries among z {approx}< 0.7 Sloan Digital Sky Survey quasars. These are predicted by models of supermassive BH and host galaxy coevolution, therefore their census and population properties constitute an important test of these models. In our working hypothesis, one of the two BHs accretes at a much higher rate than the other and carries with it the only broad emission line region of the system, making the system analogous to a single-lined spectroscopic binary star. Accordingly, we used spectroscopic principal component analysis to search for broad H{beta} emission lines that are displaced from the quasar rest frame by |{Delta} v| {approx}> 1000 km s{sup -1}. This method also yields candidates for rapidly recoiling BHs. Of the 88 candidates, several were previously reported in the literature. We found a correlation between the peak offset and skewness of the broad H{beta} profiles, suggesting a common physical explanation for these profiles. We carried out follow-up spectroscopic observations of 68 objects to search for changes in the peak velocities of the H{beta} lines. We measured statistically significant changes in 14 objects, with implied accelerations between -120 and +120 km s{sup -1} yr{sup -1}. Interpreting the offset broad emission lines as signatures of supermassive binaries is subject to many caveats. Many more follow-up observations over a long temporal baseline are needed to characterize the variability pattern of the broad lines and test that it is consistent with orbital motion. The possibility that some of the objects in this sample are rapidly recoiling BHs remains open.

79 ASTRONOMY AND ASTROPHYSICS↗