Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fuel cladding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Post-irradiation Examination Status for the BSU-269 Project

High-density uranium inter-metallic uranium silicide (U 3 Si 2 ) was initially considered as a potential advanced nuclear fuel for light water reactor (LWR) systems due to several advantages it demonstrated in thermophysical properties, chemical, and irradiation stability. In addition to understanding the basic thermophysical and mechanical properties of U 3 Si 2 under LWR irradiation conditions, it is important to assess its performance with advanced claddings such as FeCrAl, SiC, or conventional Zr-based claddings. Several aspects of the fuel cycle and fuel performance are being evaluated for U 3 Si 2 coupled with different types of claddings. To thoroughly characterize the U 3 Si 2 -cladding system, their chemical compatibilities and the potential for fuel-cladding chemical interaction (FCCI) must be addressed. Interdiffusion studies have been performed between U 3 Si 2 /Zry-4 and U 3 Si 2 /FeCrAl using diffusion couples. For the U 3 Si 2 /Zry-4 system, ZrSi 2 was the primary interdiffusion product observed at 800°C in addition to other secondary phases from the Zr alloying elements such as Fe and Cr. Low melting point U 6 Fe was also observed at 1000°C. For the U 3 Si 2 /FeCrAl system, at temperatures above 500°C, chemical diffusion Fe-U and Fe-U-Si was observed, increasing with rising temperatures. Although information from these non-irradiated tests is a fundamental first assessment, follow-up with focused irradiation tests is necessary. Irradiation can significantly alter the structure and evolution of the FCCI layers compared to the non-irradiated conditions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Large-eddy simulation, fuel rod vibration and grid-to-rod fretting in pressurized water reactors

Grid-to-rod fretting (GTRF) in pressurized water reactors is a flow-induced vibration phenomenon that results in wear and fretting of the cladding material on fuel rods. GTRF is responsible for over 70% of the fuel failures in pressurized water reactors in the United States. Predicting the GTRF wear and concomitant interval between failures is important because of the large costs associated with reactor shutdown and replacement of fuel rod assemblies. The GTRF-induced wear process involves turbulent flow, mechanical vibration, tribology, and time-varying irradiated material properties in complex fuel assembly geometries. This paper presents a new approach for predicting GTRF induced fuel rod wear that uses high-resolution implicit large-eddy simulation to drive nonlinear transient dynamics computations. The GTRF fluid–structure problem is separated into the simulation of the turbulent flow field in the complex-geometry fuel-rod bundles using implicit large-eddy simulation, the calculation of statistics of the resulting fluctuating structural forces, and the nonlinear transient dynamics analysis of the fuel rod. Ultimately, the methods developed here, can be used, in conjunction with operational management, to improve reactor core designs in which fuel rod failures are minimized or potentially eliminated. Furthermore, robustness of the behavior of both the structural forces computed from the turbulent flow simulations and the results from the transient dynamics analyses highlight the progress made towards achieving a predictive simulation capability for the GTRF problem.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Recent High Burnup LOCA Testing at Oak Ridge National Laboratory

To improve fuel cycle economics, increasing the fuel burnup limit in light-water reactors requires a solid technical foundation. Observations from experiments at Halden and Studsvik highlighted severe fuel fragmentation during loss-of-coolant-accident (LOCA) conditions, indicating a need for further technical considerations. These experiments suggest that the fragmentation threshold for high-burnup fuel might be influenced by pre-transient power levels. Consequently, additional LOCA test data are essential to complement existing findings and to deepen our understanding. Oak Ridge National Laboratory’s Severe Accident Test Station has been instrumental in advancing knowledge about high-burnup fuel fragmentation, relocation, and dispersal. This milestone report details two high-burnup LOCA tests designed to evaluate the effects of terminal temperature and grid spacers (or cladding restraints) on fuel fragmentation and relocation susceptibility. In addition, BISON fuel performance modeling and out-of-cell benchmark testing were conducted to better interpret the in-cell test results. These tests were developed in collaboration with fuel vendors to ensure that the results provide valuable data for topical reports and support the Nuclear Regulatory Commission’s review.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DISSOLUTION OF IRRADIATED MURR FUEL ASSEMBLIES

A literature survey on the dissolution of spent nuclear fuel from the University of Missouri Research Reactor (MURR) has been performed. This survey encompassed both internal and external literature sources for the dissolution of aluminum-clad uranium alloy fuels. The most limiting aspect of dissolution in the current facility configuration involves issues related to the control of the flammability of the off-gas from this process. The primary conclusion of this work is that based on past dissolution of this fuel in H-Canyon, four bundles of this fuel (initial charge) may be safely dissolved in a nitric acid flowsheet catalyzed with 0.002 M mercuric nitrate using a 40 scfm purge to control off-gas flammability. The initial charge may be followed by a second charge of up to five bundles to the same dissolver batch depending on volume and concentration constraints. The safety of this flowsheet relies on composite lower flammability limits (LFL) estimated from prior literature, pilot-scale work on the dissolution of site fuels, and the proposed processing flowsheet. Equipment modifications or improved LFL data offer the potential for improved processing rates. The fuel charging sequence, as well as the acid and catalyst concentrations, will control the dissolution rate during the initial portion of the cycle. These parameters directly impact the hydrogen and off-gas generation and, along with the purge flowrate determine the number of bundles that may be charged. The calculation approach within provides Engineering a means to determine optimal charging patterns. Downstream processing of this material should be similar to that of recent processing of site fuels requiring only minor adjustments of the existing flowsheet parameters.

08 HYDROGEN↗

Fatigue Test Result for High Burnup Pressurized Water Reactor Rods

The High Burnup Spent Fuel Data Project, sponsored by DOE-NE, is focused on understanding the effects of long-term storage and transportation on high burnup (HBU) (>45 gigawatt days per metric ton uranium) light water reactor fuel. The experiment includes 32 HBU spent nuclear fuel (SNF) assemblies that will be stored in a typical Independent Spent Fuel Storage Installation (ISFSI) and 25 sister rods - nine SNF rods that were removed from the fuel assemblies prior to insertion to the ISFSI and 16 SNF rods removed from similar HBU assemblies. The sister rods provide a baseline of the condition of the HBU rods prior to loading, drying, and long-term dry storage. Destructive examinations of the sister rods are focused on understanding overall SNF rod strength and durability. Both composite fuel and empty cladding will be tested to derive material properties. While the data generated can be used for multiple purposes, a primary goal of the sister rod PIE data and associated measured mechanical properties is to support existing fuel storage licensing and relicensing activities by addressing identified knowledge gaps, and enhance the technical basis for post-storage transportation, handling, and consolidation activities. Fatigue tests of HBU M5-clad, ZIRLO-clad, Zircaloy-4, and low tin Zircaloy-4 segments have been completed using ORNL’s Cyclic Integral Reversible Fatigue Tester (CIRFT). This is the first time ZIRLO-clad rods have been tested. Some of the segments were heat-treated to understand the effects of thermal transients such as those encountered during dry storage vacuum drying on the fatigue lifetime. This paper presents results of the fatigue tests obtained to date and discusses planned future tests.

Montgomery, Rose↗

Fuel performance analysis of Cr-coated Zircaloy-4 cladding during a prototypical LOCA event using BISON

Here, deformation and failure of chromium (Cr) coated Zircaloy-4 (Zry-4) were studied in loss-of-coolant accident (LOCA) conditions using the BISON fuel performance code. The BISON validation model simulating Halden research reactor experiments was extended to include Cr coatings and higher rod internal pressures to simulate high-burnup fuel. The transient simulations show Cr coatings help relieve stress in the Zry-4 substrate during the transient, delaying the onset of high-temperature creep, which leads to ballooning and bursting of the cladding. A nominal Cr coating thickness of 30 µm delays clad failure by 26 seconds and increases the clad burst temperature by 40 K. A parametric study showed that time to failure and burst temperature both increase with coating thickness, and Cr-coated cladding offers burst resistance under a wide range of rod internal pressures simulating high-burnup fuel. Results indicate that a thin Cr coating provides resistance against ballooning and bursting of cladding during LOCA events.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Progress Towards Treating the Sludges Produced During Spent Fuel Processing - 19546

As a consequence of over 50 years of Magnox reprocessing, Sellafield site is in possession of significant quantities of Magnox sludge. This sludge material is the by-product of corrosion of the magnesium based Magnox metal that clads the Magnox fuel elements. Retrievals and processing of this material poses a significant challenge as corrosion of Magnox metal has occurred under a variety of conditions and over a significant period of time, in a variety of locations. Devising processes to treat heterogeneous materials offers a significant challenge to identify technologies with robust envelopes of acceptance, to effectively operate together. This is further compounded by difficulties defining test programmes and materials for testing that will provide assurance that nonradioactive testing is suitably representative or bounding. An overview of the significant body of work undertaken to process Sellafield's Magnox sludge is provided, from the thousands of commercially sensitive reports generated over the past five decades. This covers the sampling, characterisation, strategy and process evolution, technology development and test materials. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Ductile-to-Brittle Transition Temperature for High Burnup Zircaloy-4 and ZIRLO™ Cladding Alloys Exposed to Simulated Drying Storage Conditions

Structural analyses of high-burnup fuel storage and transport casks require cladding mechanical properties and failure limits to assess fuel behavior. Properties and limits currently used are based on as-irradiated cladding samples from fuel rods discharged from reactors and stored in pools. Such cladding has reduced ductility due to irradiation effects and the presence of circumferential hydrides. However, as-irradiated cladding is not brittle. Pre-storage drying transfer operations and early stage storage subject cladding to higher temperatures and much higher pressure-induced tensile stresses than experienced in-reactor or during pool storage. If these are high enough, then radial hydrides could precipitate during pre-storage operations (slow cooling) and during dry-cask storage (very slow cooling). Radial hydrides represent an additional embrittlement mechanism that can reduce cladding failure limits during storage as the cladding temperature decreases below a ductile-to-brittle transition temperature (DBTT). As such, the effects of radial hydrides must be included in structural analyses when the cladding temperature is below or marginally above the DBTT.

Billone, M. C.↗

A layered 2D computational framework: Theory and applications to nuclear fuel behavior

Nuclear fuel performance computer codes have been developed over the last 50 years to analyze fuel behavior under various operating conditions. Traditionally, these codes used quasi-two-dimensional (also commonly known as 1.5D) representations of the fuel rod, which model the rod using a set of one-dimensional axisymmetric models that represent the behavior at specific axial positions on the rod. Modern fuel performance codes have the ability to investigate full three-dimensional (3D) effects and couple to other physics-based codes for true multiphysics simulations. However, with increasing complexity comes increasing computational costs. Many phenomena of interest involve azimuthally-varying behavior that cannot be represented using the aforementioned quasi-two-dimensional approach, but do not require the use of a full 3D model. To efficiently address these problems, there is a need for a computational framework that provides a compromise between the quasi-two-dimensional and full 3D models. In this paper, we present a new quasi-three-dimensional approach that represents the fuel as a set of 2D planar models that represent the behavior of the fuel cross-section at various axial positions. Presented here are the theory behind the methodology, test cases to illustrate proper implementation, and practical applications of its use in the BISON fuel performance code for a variety of cases in nuclear fuel analysis, such as fuel fracture, axial fuel relocation, and cladding distension and oxidation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Thermal Modelling of Advanced Test Reactor Fuel in a Generalized Dry Storage System

Star-CCM+, a computational fluid dynamics (CFD) software was used to conduct modeling and simulation of the thermal performance of a dry storage configuration consisting of Department of Energy Standardized Canisters (DOESCs) loaded with aluminum-clad spent nuclear fuel (ASNF.) The configuration includes nine DOESCs loaded with Advanced Test Reactor ASNF contained within a stainless steel overcanister centered in a ventilated, concrete overpack. The simulations were used to estimate the maximum temperatures reached by backfill gases inside the overcanister and DOESCs.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Cladding embrittlement during postulated loss-of-coolant accidents.

The effect of fuel burnup on the embrittlement of various cladding alloys was examined with laboratory tests conducted under conditions relevant to loss-of-coolant accidents (LOCAs). The cladding materials tested were Zircaloy-4, Zircaloy-2, ZIRLO, M5, and E110. Tests were performed with specimens sectioned from as-fabricated cladding, from prehydrided (surrogate for high-burnup) cladding, and from high-burnup fuel rods which had been irradiated in commercial reactors. The tests were designed to determine for each cladding material the ductile-to-brittle transition as a function of steam oxidation temperature, weight gain due to oxidation, hydrogen content, pre-transient cladding thickness, and pre-transient corrosion-layer thickness. For short, defueled cladding specimens oxidized at 1000-1200 C, ring compression tests were performed to determine post-quench ductility at {le} 135 C. The effect of breakaway oxidation on embrittlement was also examined for short specimens oxidized at 800-1000 C. Among other findings, embrittlement was found to be sensitive to fabrication processes--especially surface finish--but insensitive to alloy constituents for these dilute zirconium alloys used as cladding materials. It was also demonstrated that burnup effects on embrittlement are largely due to hydrogen that is absorbed in the cladding during normal operation. Some tests were also performed with longer, fueled-and-pressurized cladding segments subjected to LOCA-relevant heating and cooling rates. Recommendations are given for types of tests that would identify LOCA conditions under which embrittlement would occur.

08 HYDROGEN↗

Status Report on Development of TREAT Water Loop

The Transient Reactor Test (TREAT) facility is a graphite based transient test reactor at the Idaho National Laboratory (INL). TREAT started operation in 1959 and performed thousands of transient irradiations for the primary purpose of nuclear fuel safety research. TREAT operations were suspended in 1994, and then, several years later, resumed reactor operations in 2017 to support development of advanced nuclear fuels. TREAT’s more recent historic focus had been for transients with relevance to sodium cooled fast spectrum reactors. TREAT’s first year of modern experiment work performed in 2018, however, saw the demonstration of new kinds of transients focused on light water reactor (LWR) needs including reactivity initiated accidents (RIA) and loss of coolant accidents (LOCA). The successful outcome of these efforts confirmed TREAT’s viability as a transient neutron source for LWR safety research. Since TREAT’s core is air cooled and provides no “built-in” thermal hydraulic boundary conditions for tests specimens, efforts have been underway to establish water-environment capabilities for testing specimens. Small static water capsules have been established to support single rod RIA testing where transient heating is brief. Similarly, deployment of enhanced water capsules with blowdown capability is nearing completion to support single rod LOCA testing. With careful experiment design these capsules can provide representative temperature response histories and water phase transitions for some experiment parameters. The capsule approach is appropriate for cost-effective early phase phenomena identification studies on novel fuels, or when the important test variables are thought to be fairly well understood so that they can be precisely targeted (such as they are for current fleet fuels with moderate burnup UO2 in uncoated zirconium alloy cladding). Due to lack of forced convection, however, the capsule approach cannot achieve representative temperature histories in all regions of the test fuel simultaneously (e.g. cladding and fuel centerline temperatures) while providing representative timing in water phase transitions. Nor can the capsule approach provide appropriate hydraulic conditions for multi-rod bundle testing. For these reasons, design and development has been undertaken for the TREAT Water-Environment Recirculating Loop (TWERL).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Practical Solution to Used Nuclear Fuel Treatment to Enable Sustained Nuclear Energy and Recovery of Vital Materials

A systems analysis, based on previous in-depth studies, was made to develop an advanced used fuel recycling approach in which over 90% of the fuel components and cladding material are recovered and reused. This can minimize the waste requiring disposition to a geologic repository while enabling sustained nuclear energy and recovery of vital materials. The analysis assumed that: (1) continuing delays will occur in locating a site and licensing a geologic repository in the United States; (2) continued storage of used fuel at reactor sites or central storage locations is not a permanent solution; and (3) public perception is that the unresolved used fuel disposal problem is a deterrent to the continuation and expansion of the use of nuclear energy. The practical solution recommended is to move forward with a parallel approach to (1) deployment of industrialized recycling of used fuels which is a multi-decade process, and (2) focused R&D to recover the re-usable components and minimize residual waste. This approach would use concepts for proliferation resistant recycle facilities, processing oldest fuels first, and incorporating more-complete recycling of used fuel components. In addition to uranium and transuranic actinide recycle, the R&D would be focused on recovery and re-use of valuable components such as noble metals, lighter lanthanide elements, xenon gas, and zirconium from cladding. While the eventual need for a geologic repository will remain, the methods recommended can delay the need, minimize the capacity required, and significantly reduce the hazard of the wastes disposed. With no decision, the path forward for nuclear waste (used fuels) disposal remains uncertain, with many diverse technologies being considered. However, a decision to take advantage of proliferation resistant facility design, processing aged fuels, and incorporation of the concepts of nearcomplete recycling will provide the focus and path forward to a practical solution to the problem of nuclear waste disposal.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Computational Modeling of Multi-Pass Rolling Parameters Effect on Resulting Fuel Foil Shape

A focus of the U.S. Department of Energy is to improve production yield and reduce the cost of Low Enriched Uranium (LEU)-molybdenum alloy (U-10Mo) monolithic fuel plates that will be replacing High Enriched Uranium (HEU) oxide dispersion fuels used currently in the United States High Performance Research Reactors (USHPRR). One area of improvement is lowering the high transverse waviness and longitudinal waviness currently present within rolled foils prior to cladding to produce fuel plates. Traditional rolling manufacturing techniques for other metal foils use winders to pull and straighten the foil as it is rolled back and forth to the final thickness. This approach cannot be used to roll thin U-10Mo foils (0.008-0.025” thick) because only small castings can be rolled due to nuclear criticality safety concerns. As a result, the fuel foils are too short (1 m in length) to use traditional winders. Therefore, it is crucial to identify other rolling parameters (i.e., roller friction, axial tension load, roller diameter, and roll pass reduction percent) that might reduce transverse waviness and longitudinal waviness in the rolled fuel foil and develop a high-yield, low-cost multi-pass rolling manufacturing process. This report documents a systematic finite element modeling study to investigate the effects of numerous rolling parameters to reduce resulting transverse waviness and longitudinal waviness in the fuel foil during multi-pass rolling of U-10Mo foils. The rolling of a U-10Mo plate with initial dimensions of 1”x1”x 0.048” is modeled using Abaqus CAE. This rolling is modeled to undergo eight 20% reduction roll passes to a final fuel foil thickness of 0.01”. The elastic-plastic constitutive model of the U-10Mo alloy was input to the fuel foil rolling model. The rollers were modeled as rigid bodies. A comparison of rolling friction coefficients of 0.3 and 0.7 over a wide range of applied axial tension loads were investigated in order to evaluate the effect of using a lubricant during rolling. The effect of roller diameter on the resulting transverse waviness and longitudinal waviness of the fuel foil over a wide range of axial tension loads were also investigated by modeling rollers 7/8” and 3.75” in diameter. The results of this systematic finite element method study will aid manufacturers in producing low transverse waviness and reduced longitudinal waviness in U-10Mo fuel foils.

U-10Mo, FEA, Rolling, Residual Stress, Fuel Foil↗

Assessment of the BISON Metallic Fuel Performance Models

The US Department of Energy is leading a project to design and construct a fast spectrum test reactor called the Versatile Test Reactor (VTR). The BISON nuclear fuel performance code will be used to model VTR driver fuel, including looking at the effects of differences between the VTR driver fuel element design and the legacy fuel designs and experiments on which it is based. Simulations will be conducted to help determine whether the design’s behavior and performance are properly understood and to assess the margins to cladding failure and fuel melting relative to those predicted for past metallic fuel experiments. These predictions are expected to streamline VTR design and operation by helping inform the VTR driver fuel element design and by providing supplemental information for the fuel design safety basis.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

SCANAIR-BISON BENCHMARK ON CIP0-1 RIA TEST

In the frame of their research programs on fuel safety, the French “Institut de Radioprotection et de Sûreté Nucléaire” (IRSN) and the Idaho National Laboratory (INL) have developed respectively SCANAIR and BISON codes to describe the thermo-mechanical behavior of irradiated fuel rods during Reactivity Initiated Accidents (RIA) in LWR. A RIA, characterized by a very rapid increase of reactivity and power in some rods of the reactor, can be schematically represented in two main phases. First, the energy deposition leads to a rapid rise of the fuel temperature which induces thermal swelling of the fuel pellets. During this phase, the Pellet Clad Mechanical Interaction (PCMI) leads to clad deformation and potentially to failure depending on fuel enthalpy increase and on the level of clad embrittlement. After the PCMI phase, the increase of clad temperature can lead to the boiling crisis of the water surrounding the rod. During the film boiling phase, the clad to coolant heat transfer becomes very low and the clad can reach high temperature (>700°C). Depending on the internal gas pressure, the ductile clad can undergo large deformation and possible failure. The RIA codes have to predict properly these two phases of the transient in order to be used, in particular, to assess current fuel safety criteria but also to be able to predict the behavior of upcoming fuel (such as accident tolerant fuel). In this paper, codes computation comparison against experimental data obtained on CIP0-1 test is done for the first phase of the transient, the PCMI phase, in order to point out the strengths and weaknesses of the codes. The CIP0-1 experiment was performed with UO2 high burnup fuel in the CABRI sodium loop facility, at 280°C and low pressure (~3 bars) without boiling crisis and no failure of the fuel rod. The initial state of the rod calculated by irradiation codes are compared with measurements before the transient. Then global rod thermal behavior during the CIP0-1 test is assessed with the sodium coolant temperature measurements. The rod mechanical behavior is analyzed with the fuel and clad elongation and the clad residual hoop strain. Finally comparison of the fission gas behavior between codes is performed and compared to the measurements of the fission gas released in the experiment.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effects of thermal treatment on the co-rolled U-Mo fuel foils

A monolithic fuel type is being developed to convert US high performance research and test reactors such as Advanced Test Reactor (ATR) at Idaho National Laboratory from highly enriched uranium (HEU) to low-enriched uranium (LEU). The interaction between the cladding and the U-Mo fuel meat during fuel fabrication and irradiation is known to have negative impacts on fuel performance, such as mechanical integrity and dimensional stability. In order to eliminate/minimize the direct interaction between cladding and fuel meat, a thin zirconium diffusion barrier was introduced between the cladding and U-Mo fuel meat through a co-rolling process. A complex interface between the zirconium and U-Mo was developed during the co-rolling process. A predictable interface between zirconium and U-Mo is critical to achieve good fuel performance since the interfaces can be the weakest link in the monolithic fuel system. A post co-rolling annealing treatment is expected to create a well-controlled interface between zirconium and U-Mo. A systematic study utilizing post co-rolling annealing treatment has been carried out. Based on microscopy results, the impacts of the annealing treatment on the interface between zirconium and U-Mo will be presented and an optima annealing treatment schedule will be suggested. The effects of the annealing treatment on the fuel performance will also be discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Challenges and opportunities to alloyed and composite fuel architectures to mitigate high uranium density fuel oxidation: uranium silicide

We report the challenges and opportunities to alloyed and composite fuel architectures designed and intended to mitigate oxidation of the fuel during a cladding breech of a water-cooled reactor are discussed in three review manuscripts developed in parallel, with the presented article focused on the oxidation performance of uranium silicide. Several high uranium density fuels are under consideration for deployment as accident tolerant and/or advanced technology nuclear reactor fuels, including UN, U 3 Si 2 , UC and UB 2 . Presented here are the literature for the U3Si2 degradation modes, thermodynamics, and oxidation performance of the pure compound and its reported alloyed and composite architectures. Furthermore, this review covers the materials and techniques for the incorporation of additives, dopants, or composite fuel architectures to improve the oxidation/corrosion behavior for high uranium density fuels for use in LWRs.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗