Search NASA⌕ Search

SEARCH · Search NASA

Results for “Infrared techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

NOx Reduction on a Transition Metal-free γ-Al2O3 Catalyst Using Dimethylether (DME)

NO2 and dimethylether (DME) adsorption as well as DME and NO2 coadsorption on a transition metal-free γ-alumina catalyst were investigated via in-situ transmission Fourier transform infrared spectroscopy (in-situ FTIR), residual gas analysis (RGA) and temperature programmed desorption (TPD) techniques. NO2 adsorption at room temperature leads to the formation of surface nitrates and nitrites. DME adsorption on the alumina surface at 300 K leads to molecularly adsorbed DME, molecularly adsorbed methanol and surface methoxides. Upon heating the DME-exposed alumina to 500-600 K the surface is dominated by methoxide groups. At higher temperatures methoxide groups are converted into formates. At T > 510 K formate decomposition takes place to form H2O(g) and CO(g). DME and NO2 coadsorption at 423 K do not indicate a significant reaction between DME and NO2. However, in similar experiments at 573 K, fast reaction occurs and the methoxides present at 573 K before the NO2 adsorption are converted into formates, simultaneously with the formation of isocyanates. Under these conditions, NCO can further be hydrolyzed into isocyanic acid or ammonia with the help of water which is generated during the formate formation, decomposition and/or NCO formation steps.

10 SYNTHETIC FUELS↗

Tapioca starch: An efficient fuel in gel-combustion synthesis of photocatalytically and anti-microbially active ZnO nanoparticles

Zinc oxide nanoparticles were synthesized by gel-combustion method using novel bio-fuel tapioca starch pearls, derived from the tubers of Manihotesculenta. The product is characterized using various techniques. The X-ray diffraction pattern correspond to a hexagonal zincite structure. Fourier transform infrared spectrum showed main absorption peaks at 394 and 508 cm{sup −} {sup 1} due to stretching vibration of Zn–O. Ultravoilet–visible spectrum of zinc oxide nanoparticles showed absorption maximum at 373 nm whereas the maximum of the bulk zinc oxide was 377 nm. The morphology of the product was studied using scanning electron microscopy and transmission electron microscopy. The scanning electron microscopic images showed that the products are agglomerated and porous in nature. The transmission electron microscopic images revealed spherical particles of 40–50 nm in diameter. The photocatalytic degradation of methylene blue was examined using zinc oxide nanoparticles and found more efficient in sunlight than ultra-violet light due to reduced band gap. The antibacterial properties of zinc oxide nanoparticles were investigated against four bacterial strains Klebsiella aerogenes, Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aereus, where Pseudomonas aeruginosa and Staphylococcus aereus exhibited significant antibacterial activity in agar well diffusion method when compared to positive control. - Highlights: • ZnO nanoparticles have been prepared from a new bio-fuel, tapioca starch by gel combustion method. • XRD pattern revealed hexagonal zincite crystal structure with crystallite size 33 nm. • ZnO nanoparticles exhibited a band gap of 2.70 eV. • The ZnO nanoparticles exhibited superior degradation in sunlight in comparison with UV light. • The product showed a good anti-bacterial activity against two bacterial strains.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of amino acid doping on the growth and ferroelectric properties of triglycine sulphate single crystals

Effect of amino acids (L-leucine and isoleucine) doping on the growth aspects and ferroelectric properties of triglycine sulphate crystals has been studied. Pure and doped crystals were grown from aqueous solution by low temperature solution growth technique. The cell parameter values were found to significantly vary for doped crystals. Fourier transform infrared analysis confirmed the presence of functional groups in the grown crystal. Morphology study reveals that amino acid doping induces faster growth rate along b-direction leading to a wide b-plane and hence suitable for pyroelectric detector applications. Ferroelectric domain structure has been studied by atomic force microscopy and hysteresis measurements reveal an increase of coercive field due to the formation of single domain pattern.

36 MATERIALS SCIENCE↗

Unique properties of α-NaFeO{sub 2}: De-intercalation of sodium via hydrolysis and the intercalation of guest molecules into the extract solution

Graphical abstract: - Highlights: • Facile de-intercalating Na from NaFeO2. • Formation of layered sodium hydrogen carbonate hydrate. • Intercalation chemistry on layered sodium hydrogen carbonate hydrate. - Abstract: We report on a versatile method for the de-intercalation of Na from α-NaFeO{sub 2} by using water to produce α-Na{sub 1−x}FeO{sub 2}, where x ≈ 1. This de-intercalation technique provides an excellent route to ion exchange Na with other metal ions in α-NaFeO{sub 2}. The hydrolysis mechanism is provided. We show that the extracted solution captures CO{sub 2} from the atmosphere leading to the formation of sodium hydrogen carbonate hydrate crystals. The lamellar structure of the hydrate crystals was confirmed by powder X-ray diffraction, and were found Na-deficient via elemental analysis. Intercalation of guest molecules such as polymers, alcohols, and inorganic ions into the gallery space of the newly formed sodium hydrogen carbonate hydrate crystals was demonstrated by the use of powder X-ray diffraction technique. The reported materials were also characterized by Mössbauer spectroscopy, thermogravimetric analysis, differential scanning calorimetry, infrared spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy.

36 MATERIALS SCIENCE↗

Facile preparation of zinc oxide nanorods surrounded by graphene quantum dots both synthesized via separate pyrolysis procedures for photocatalyst application

Highlights: • ZnO NRs and GQDs were made separately via a simple and one-stage pyrolysis method. • Because of the employed compositing method, GQDs compactly surrounded the ZnO NRs. • Bandgap of ZnO NRs decreased from 3.2 to 2.8 eV after they were surrounded by GQDs. • Despite being inefficient alone, GQDs largely enhanced ZnO photocatalytic activity. • The mechanism was mainly attributed to the decrease in recombination rate of ZnO. - Abstract: A facile pyrolysis method was employed for separate synthesis of zinc oxide nanorods (ZnO NRs) and graphene quantum dots (GQDs) and the structures were composited. The structures were characterized by field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray diffractometry (XRD), and Fourier transform infrared (FTIR) spectroscopy. The structures were optically characterized by UV–vis and photoluminescence (PL) spectrometry techniques, showing that the absorption of ZnO NRs increases in the visible region after being surrounded by GQDs. Optical bandgaps of ZnO NRs and ZnO NRs/GQDs composite were estimated as 3.2 and 2.8 eV, respectively. Based on PL analysis, it was deduced that the generated electron-hole recombination rate of ZnO NRs decreases after being surrounded by GQDs. Finally, it was shown that our GQDs, despite being relatively inefficient separately, significantly enhance the photocatalytic activity of ZnO on methylene blue mainly through decreasing the e-h recombination rate of ZnO NRs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Light-Driven Liquid Crystalline Materials: From Photo-Induced Phase Transitions and Property Modulations to Applications

Light-driven phenomena both in living systems and nonliving materials have enabled truly fascinating and incredible dynamic architectures with terrific forms and functions. Recently, liquid crystalline materials endowed with photoresponsive capability have emerged as enticing systems. Here, we focus on the developments of light-driven liquid crystalline materials containing photochromic components over the past decade. Design and synthesis of photochromic liquid crystals (LCs), photoinduced phase transitions in LC, and photoalignment and photoorientation of LCs have been covered. Photomodulation of pitch, polarization, lattice constant and handedness inversion of chiral LCs is discussed. Light-driven phenomena and properties of liquid crystalline polymers, elastomers, and networks have also been analyzed. The applications of photoinduced phase transitions, photoalignment, photomodulation of chiral LCs, and photomobile polymers have been highlighted wherever appropriate. The combination of photochromism, liquid crystallinity, and fabrication techniques has enabled some fascinating functional materials which can be driven by ultraviolet, visible, and infrared light irradiation. Nanoscale particles have been incorporated to widen and diversify the scope of the light-driven liquid crystalline materials. The developed materials possess huge potential for applications in optics, photonics, adaptive materials, nanotechnology, etc. The challenges and opportunities in this area are discussed at the end of the Review.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ion Specificity Influences on the Structure of Zwitterionic Brushes

Zwitterionic brushes have a wide range of applications, including use as lubricating surfaces and antifouling membranes. In this study, densely end-tethered poly(cysteine methacrylate) (PCysMA) brushes were synthesized using surfaceinitiated activators regenerated by electron transfer atom transfer radical polymerization (SI-ARGET-ATRP). The structure of the PCysMA brushes was investigated using ellipsometry, X-ray reflectivity (XRR), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), and atomic force microscopy (AFM). The results of these characterization techniques were used to study the effect of SO 4 2– , Cl – , NO 3 – , Br – , and SCN – anions, divalent Ca 2+ and Ba 2+ cations, and trivalent Y 3+ cations on the structure of the PCysMA brushes. The results showed that the PCysMA brushes in solution exhibit an “antipolyelectrolyte” effect to a certain degree, which inversely follows the Hofmeister series of anions. The introduction of divalent cations Ca 2+ and Ba 2+ had a modest impact on the dimensions of the PCysMA brushes, indicating that chelating interactions between the cations and zwitterion units work against the “antipolyelectrolyte” effect. The complexation was even stronger in the presence of trivalent Y 3+ cations, which caused the PCysMA brushes to shrink. These findings highlight the importance of ion specificity to the structure of zwitterionic brushes in aqueous solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atom Efficiency of Pd Sites for Methane Combustion: Single Atom Catalysts Versus Nanocatalysts

Methane combustion is an important reaction for energy production and methane removal from the atmosphere. This reaction highly relies on the use of noble metal Pd-based catalysts, which therefore drives the pursuit of catalysts with high atomic dispersion and activity. In this work, Pd/ceria catalysts dominated with Pd single atoms or nanosized Pd clusters (∼1 nm) are prepared and characterized by combining high-resolution high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), in situ diffuse reflectance infrared Fourier-transform spectroscopy (DRIFTS), and Raman and X-ray absorption spectroscopy (XAS) techniques. By comparing the turnover frequencies (TOF; per every Pd atom) of Pd/ceria single atom catalysts and nanocatalysts, it is found that the atom efficiency of Pd is increased by 10 ∼30 times from single atom catalysts to nanocatalysts. For Pd single atom catalysts, although their activity can be tuned by changing the local structures, the intrinsic activity and number of active sites need to be further improved by engineering the surfaces of supports. For nanosized Pd species, despite the high TOF, the Pd atoms in the bulk structure are not directly participating in the catalytic reaction. Furthermore, this work highlights the importance of increasing the intrinsic activity of individual noble atoms, as well as the homogeneity of their local structures. For Pd/ceria systems reported in this work, our results indicate that from the application point of view, at the current stage, it is not practical to replace Pd nanocatalysts with single atom catalysts for methane combustion.

Pd↗

Sulfated Zirconium Metal–Organic Frameworks as Well-Defined Supports for Enhancing Organometallic Catalysis

Understanding heterogeneous catalysts is a challenging pursuit due to surface site nonuniformity and aperiodicity in traditionally-used materials. One example is sulfated metal oxides, which function as highly-active catalysts and as supports for organometallic complexes. These applications are due to traits such as acidity, ability to act as a weakly coordinating ligand, and aptitude for promoting transformations via radical cation intermediates. Research is ongoing about the structural features of sulfated metal oxides that imbue the aforementioned properties, such as sulfate geometry and coordination. To better understand these materials, metal–organic frameworks (MOFs) have been targeted as structurally-defined analogs. Composed of inorganic nodes and organic linkers, MOFs possess features such as high porosity and crystallinity, which make them attractive for mechanistic studies of heterogeneous catalysts. In this work, a Zr 6 -based MOF NU-1000 is sulfated and characterized using atomically-precise techniques such as single crystal X-ray diffraction (SCXRD) in addition to diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Here, the dynamic nature of the sulfate binding motif is found to transition from monodentate, to bidentate, to tridentate depending on the degree of hydration, as supported by density functional theory (DFT) calculations. Heightened Brønsted acidity compared to the parent MOF was observed upon sulfation, and probed through trimethylphosphine oxide (TMPO) physisorption, ammonia sorption, in-situ ammonia DRIFTS, and DFT studies. With the support structure benchmarked, an organoiridium complex was chemisorbed onto the sulfated MOF node and the efficacy of this supported catalyst was demonstrated for stoichiometric and catalytic activation of benzene-d6 and toluene with structure-activity relationships derived.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Standoff Detection of Explosive Residues Using Photothermal Microcantilevers

Standoff detection of trace explosives is gaining attention due to its immediate relevance in countering terrorist threats based on explosive devices. However, most currently available standoff techniques rely on expensive, complex, and bulky equipment. We have demonstrated highly selective and sensitive standoff detection of explosive residues on surfaces by using photothermal spectroscopy carried out with bimaterial microcantilever sensors. The demonstrated sensitivity of the technique, 100 ng/cm{sup 2}, is sufficient to detect the explosive contamination generally found on explosive devices. The sensitivity of the technique can be further improved by optimizing the bimaterial cantilever and by using higher intensity infrared sources.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Studies on the Properties of Plasticizer and Lithium Salt on PMMA-based Solid Polymer Electrolytes

The effects of plasticizer and lithium salt on PMMA-based solid polymer electrolyte have been investigated. In current project, three system samples consisted of pure poly(methyl methacrylate (PMMA) system, plasticized poly(methyl methacrylate)(PMMA-EC) system and the LiCF{sub 3}SO{sub 3} salted-poly(methyl methacrylate) containing a fixed amount of plasticizer ([PMMA-EC]-LiCF{sub 3}SO{sub 3}) system have been prepared using solution casting technique. The conductivities of the films from each system are characterized by impedance spectroscopy and infrared spectrum. With the addition of plasticizer, results show improvement on the ionic conductivity value where the value of 6.25x10{sup -10} Scm{sup -1} is obtained. This may be due to the nature of plasticizer that softens the polymer and hence enhanced the ionic transportation across the polymer. The room temperature conductivity for the highest conducting sample in the ([PMMA-EC]-LiCF{sub 3}SO{sub 3}) system is 1.36x10{sup -5} Scm{sup -1}. Fourier Transform Infrared Spectroscopy (FTIR) indicates complexation between the polymer and the plasticizer and the polymer, the plasticizer and the salts, and the result of XRD further supports the observation.

36 MATERIALS SCIENCE↗

Lithographically fabricated silicon microreactor for in situ characterization of heterogeneous catalysts—Enabling correlative characterization techniques

We report on a new modular setup on a silicon-based microreactor designed for correlative spectroscopic, scattering, and analytic on-line gas investigations for in situ studies of heterogeneous catalysts. The silicon microreactor allows a combination of synchrotron radiation based techniques (e.g., X-ray diffraction and X-ray absorption spectroscopy) as well as infrared thermography and Raman spectroscopy. Catalytic performance can be determined simultaneously by on-line product analysis using mass spectrometry. We present the design of the reactor, the experimental setup, and as a first example for an in situ study, the catalytic partial oxidation of methane showing the applicability of this reactor for in situ studies.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Region-of-interest diffuse optical tomography system

Diffuse optical tomography (DOT) using near-infrared light is a promising tool for non-invasive imaging of deep tissue. This technique is capable of quantitative reconstruction of absorption (μ{sub a}) and scattering coefficient (μ{sub s}) inhomogeneities in the tissue. The rationale for reconstructing the optical property map is that the absorption coefficient variation provides diagnostic information about metabolic and disease states of the tissue. The aim of DOT is to reconstruct the internal tissue cross section with good spatial resolution and contrast from noisy measurements non-invasively. We develop a region-of-interest scanning system based on DOT principles. Modulated light is injected into the phantom/tissue through one of the four light emitting diode sources. The light traversing through the tissue gets partially absorbed and scattered multiple times. The intensity and phase of the exiting light are measured using a set of photodetectors. The light transport through a tissue is diffusive in nature and is modeled using radiative transfer equation. However, a simplified model based on diffusion equation (DE) can be used if the system satisfies following conditions: (a) the optical parameter of the inhomogeneity is close to the optical property of the background, and (b) μ{sub s} of the medium is much greater than μ{sub a} (μ{sub s} > > μ{sub a}). The light transport through a highly scattering tissue satisfies both of these conditions. A discrete version of DE based on finite element method is used for solving the inverse problem. The depth of probing light inside the tissue depends on the wavelength of light, absorption, and scattering coefficients of the medium and the separation between the source and detector locations. Extensive simulation studies have been carried out and the results are validated using two sets of experimental measurements. The utility of the system can be further improved by using multiple wavelength light sources. In such a scheme, the spectroscopic variation of absorption coefficient in the tissue can be used to arrive at the oxygenation changes in the tissue.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Conformational explosion: Understanding the complexity of short chain para -dialkylbenzene potential energy surfaces

The single-conformation ultraviolet and infrared spectroscopy of three short-chain para-dialkylbenzenes (para-diethylbenzene, para-dipropylbenzene, and para-dibutylbenzene) is reported for the jet-cooled, isolated molecules. The present study builds off previous work on single-chain n-alkylbenzenes, where an anharmonic local mode Hamiltonian method was developed to account for stretch-bend Fermi resonance in the alkyl CH stretch region [D. P. Tabor et al., J. Chem. Phys. 144, 224310 (2016)]. The jet-cooled molecules are interrogated using laser-induced fluorescence (LIF) excitation, fluorescence dip infrared spectroscopy, and dispersed fluorescence. The LIF spectra in the S1 ← S0 origin region show a dramatic increase in the number of resolved transitions with increasing length of the alkyl chains, reflecting an explosion in the number of unique low-energy conformations formed when two independent alkyl chains are present. Since the barriers to isomerization of the alkyl chain are similar in size, this results in an “egg carton” shaped potential energy surface. A combination of electronic frequency shift and alkyl CH stretch infrared spectra is used to generate a consistent set of conformational assignments. Using these experimental techniques in conjunction with computational methods, subsets of origin transitions in the LIF excitation spectrum can be classified into different conformational families. Two conformations are resolved in para-diethylbenzene, seven in para-dipropylbenzene, and about nineteen in para-dibutylbenzene. These chains are largely independent of each other as there are no new single-chain conformations induced by the presence of a second chain. A cursory LIF excitation scan of para-dioctylbenzene shows a broad congested spectrum at frequencies consistent with interactions of alkyl chains with the phenyl π cloud

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ON THE RELATIONSHIP BETWEEN DEBRIS DISKS AND PLANETS

Dust in debris disks is generated by collisions among planetesimals. The existence of these planetesimals is a consequence of the planet formation process, but the relationship between debris disks and planets has not been clearly established. Here we analyze Spitzer/MIPS 24 and 70 {mu}m data for 150 planet-bearing stars, and compare the incidence of debris disks around these stars with a sample of 118 stars around which planets have been searched for, but not found. Together they comprise the largest sample ever assembled to deal with this question. The use of survival analysis techniques allows us to account for the large number of nondetections at 70 {mu}m. We discovered 10 new debris disks around stars with planets and one around a star without known planets. We found that the incidence of debris disks is marginally higher among stars with planets, than among those without, and that the brightness of the average debris disk is not significantly different in the two samples. We conclude that the presence of a planet that has been detected via current radial velocity techniques is not a good predictor of the presence of a debris disk detected at infrared wavelengths.

99 GENERAL AND MISCELLANEOUS↗

Strongly driven molecules: Traces of soft recollisions for intermediate intensities in the over-the-barrier regime

Using a three-dimensional quasiclassical technique, we explore double ionization in N{sub 2} when driven by a linearly polarized, infrared (800 nm) long (27 fs) laser pulse. For intensities ranging from the tunneling to the over-the-barrier regime, we identify the double-ionization pathways in a unified way as a function of total final electron energy. Moreover, for intermediate intensities in the over-the-barrier regime we find that the correlated electron momenta have a prevailing square pattern. This square pattern is mainly due to the delayed (one electron is ejected with a delay after recollision) pathway's contribution to double ionization. For intermediate intensities the delayed pathway is dominated by 'soft' recollisions [identified in Phys. Rev. A 80, 053415 (2009)], with the first electron tunneling at large field phases. We expect this square pattern to be absent for high intensities.

74 ATOMIC AND MOLECULAR PHYSICS↗

From hidden symmetry to extra dimensions: A five-dimensional formulation of the degenerate BESS model

We consider the continuum limit of a moose model corresponding to a generalization to N sites of the degenerate BESS model. The five-dimensional formulation emerging in this limit is a realization of a RS1 type model with SU(2){sub L} x SU(2){sub R} in the bulk, broken by boundary conditions and a vacuum expectation value on the infrared brane. A low-energy effective Lagrangian is derived by means of the holographic technique and corresponding bounds on the model parameters are obtained.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗