Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC FIELD CONFIGURATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Weighted current sheets supported in normal and inverse configurations - A model for prominence observations

A technique which incorporates both photospheric and prominence magnetic field observations is used to analyze the magnetic support of solar prominences in two dimensions. The prominence is modeled by a mass-loaded current sheet which is supported against gravity by magnetic fields from a bipolar source in the photosphere and a massless line current in the corona. It is found that prominence support can be achieved in three different kinds of configurations: an arcade topology with a normal polarity; a helical topology with a normal polarity; and a helical topology with an inverse polarity. In all cases the important parameter is the variation of the horizontal component of the prominence field with height. Adding a line current external to the prominence eliminates the nonsupport problem which plagues virtually all previous prominence models with inverse polarity.

Demoulin, P.↗

Statics of the nightside Jovian plasma sheet

Data are analyzed from the low energy charged particle (LECP) and magnetic field (MAG) experiments on the Voyager 2 spacecraft that demonstrate that the configuration of the Jovian plasma sheet at distances of about .80 to about 120 Jupiter radii is determined by ions (protons and heavier nuclei) of energies greater than approximately 30 keV. The energy densities of these ions are sufficient to provide the diamagnetic depressions in the magnetic field strengths observed as the spacecraft crossed the Jovian plasma sheet. The particle bulk direction of motion is predominantly across the local magnetic field, consistent with that expected from corotation of the planetary magnetic field.

Lanzerotti, L. J.↗

The analysis of single-electron orbits in a free electron laser based upon a rectangular hybrid wiggler

A three-dimensional analysis of a novel free-electron laser (FEL) based upon a rectangular hybrid wiggler (RHW) is presented. This RHW is designed in a configuration composed of rectangular rings with alternating ferrite and dielectric spacers immersed in a solenoidal magnetic field. An analytic model of RHW is introduced by solution of Laplace's equation for the magnetostatic fields under the appropriate boundary conditions. The single-electron orbits in combined RHW and axial guide magnetic fields are studied when only the first and the third spatial harmonic components of the RHW field are taken into account and the higher order terms are ignored. The results indicate that the third spatial harmonic leads to group III orbits with a strong negative mass regime particularly in large solenoidal magnetic fields. RHW is found to be a promising candidate with favorable characteristics to be used in microwave FEL.

43 PARTICLE ACCELERATORS↗

Drift-free magnetic geometries in adiabatic

A class of two-dimensional drift-free fields, somewhat resembling the configuration found in the geomagnetic tail, is described; several proofs of the drift-free property are given, including some that suggest that the property of vanishing net drift might extend to nonadiabatic orbits. A general criterion for identifying drift-free fields was developed, and a case of motion in a nearly drift-free field was also investigated. The theory was applied to the plasma sheet in the earth's magnetotail, and observational evidence is presented suggesting that the magnetic field there does approach a drift-free configuration.

Stern, D. P.↗

On a High-Mirror Stellarator Reactor Exploratory Concept With Neutrons Concentrated on Centrifuge Liquids

In the framework of fusion energy research based on magnetic confinement, stellarators allow numerous degrees of freedom for the design of the magnetic trap and plasma shape. Taking advantage of these features, some plasma shapes might benefit several of the many integrated elements involved in commercial fusion reactors, like, e.g., decreasing the number, mass and complexity of replaced activated in-vessel components (IVC) (i.e., by using liquids), extraction of large power, tritium generation, and remote maintenance. Certainly, free-surface liquid materials were proposed for tokamaks and field-reversed configuration (FRC) to try to improve some of such elements, i.e., in advanced power extraction (APEX) studies. Some reactor-relevant quasi-isodynamic (QI) magnetic configurations exhibit a relatively straight sector of plasma and high magnetic mirror. The combination of those elements and possibilities in a single stellarator reactor concept might have some advantages, in spite of the uncertainties due to the current low technological readiness level (TRL). The proposed and studied reactor concept is based on a vacuum vessel having short curved sectors and longer wide cylindrical sectors, which encloses a high-mirror low-vertical-excursion magnetic configuration, and swirling liquids or rotating cylinders, which centrifuge molten Li salts located at the low field region. Thus, the molten salts (if possible covered by a thin layer of liquid lithium) would be located on the internal perimeter of the cylinder, to act as particle exhaust (except for helium), neutron power extractor, and tritium breeder. The high-mirror feature tries to concentrate the neutron power at the cylindrical sectors, which might avoid using breeding materials at the curved sectors. The different elements of the concept are exploratorily studied and defined, and the difficulties assessed.

centrifuge↗

On the non-Gaussian correlation of the primordial curvature perturbation with vector fields

We compute the three-point cross-correlation function of the primordial curvature perturbation generated during inflation with two powers of a vector field in a model where conformal invariance is broken by a direct coupling of the vector field with the inflaton. If the vector field is identified with the electromagnetic field, this correlation would be a non-Gaussian signature of primordial magnetic fields generated during inflation. We find that the signal is maximized for the flattened configuration where the wave number of the curvature perturbation is twice that of the vector field and in this limit, the magnetic non-linear parameter becomes as large as |b{sub NL}| ∼ O(10{sup 3}). In the squeezed limit where the wave number of the curvature perturbation vanishes, our results agree with the magnetic consistency relation derived in arXiv:1207.4187.

79 ASTRONOMY AND ASTROPHYSICS↗

Structure of Longitudinal and Transverse Currents in Current Sheets

The structure of magnetic fields and currents in current sheets formed in 2D and 3D magnetic configurations with an X line is analyzed using experimental data. It is found that, in addition to the main (longitudinal) current, transverse currents comparable in magnitude with the main current are also generated in current sheets. Relations between the longitudinal and transverse currents in current sheets formed in different magnetic configurations are obtained. The vectors of the total currents and their deviations from the direction of the main current in different regions of the sheet are determined. It is shown that the total magnetic fields and currents in current sheets have a 3D structure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Anchoring Polar Magnetic Field in a Stationary Thick Accretion Disk

We investigate the properties of a hot accretion flow bathed in a poloidal magnetic field. We consider an axisymmetric viscous-resistive flow in the steady-state configuration. We assume that the dominant mechanism of energy dissipation is due to turbulence viscosity and magnetic diffusivity. A certain fraction of that energy can be advected toward the central compact object. We employ the self-similar method in the radial direction to find a system of ODEs with just one varible, θ in the spherical coordinates. For the existence and maintenance of a purely poloidal magnetic field in a rotating thick disk, we find that the necessary condition is a constant value of angular velocity along a magnetic field line. We obtain an analytical solution for the poloidal magnetic flux. We explore possible changes in the vertical structure of the disk under the influences of symmetric and asymmetric magnetic fields. Our results reveal that a polar magnetic field with even symmetry about the equatorial plane makes the disk vertically thin. Moreover, the accretion rate decreases when we consider a strong magnetic field. Finally, we notice that hot magnetized accretion flows can be fully advected even in a slim shape.

79 ASTRONOMY AND ASTROPHYSICS↗

Gauge cosmic chiral strings in general relativity

Cylindrically symmetric self-gravitating configurations of string (vortex) type are considered within the framework of the chiral SU(2) model with the inclusion of the Yang-Mills proper gauge field. In the approximation of the large topological charge n the solutions to the field equations are found, with the magnetic field of the vortex being longitudinal. The linear energy density of the vortex configuration is estimated.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Optical manipulation of magnetic vortices visualized in situ by Lorentz electron microscopy

By understanding the fundamental dynamics of topological vortex and antivortex naturally formed in microscale/nanoscale ferromagnetic building blocks under external perturbations is crucial to magnetic vortex–based information processing and spintronic devices. All previous studies have focused on magnetic vortex–core switching via external magnetic fields, spin-polarized currents, or spin waves, which have largely prohibited the investigation of novel spin configurations that could emerge from the ground states in ferromagnetic disks and their underlying dynamics. We report in situ visualization of femtosecond laser quenching–induced magnetic vortex changes in various symmetric ferromagnetic Permalloy disks by using Lorentz phase imaging of four-dimensional electron microscopy that enables in situ laser excitation. Besides the switching of magnetic vortex chirality and polarity, we observed with distinct occurrence frequencies a plenitude of complex magnetic structures that have never been observed by magnetic field– or current-assisted switching. These complex magnetic structures consist of a number of newly created topological magnetic defects (vortex and antivortex) strictly conserving the topological winding number, demonstrating the direct impact of topological invariants on magnetization dynamics in ferromagnetic disks. Their spin configurations show mirror or rotation symmetry due to the geometrical confinement of the disks. Combined micromagnetic simulations with the experimental observations reveal the underlying magnetization dynamics and formation mechanism of the optical quenching–induced complex magnetic structures. Their distinct occurrence rates are pertinent to their formation-growth energetics and pinning effects at the disk edge. On the basis of these findings, we propose a paradigm of optical quenching–assisted fast switching of vortex cores for the control of magnetic vortex–based information recording and spintronic devices.

4D electron microscopy↗

Energy dissipation of Alfven wave packets deformed by irregular magnetic fields in solar-coronal arches

The importance of field line geometry for shear Alfven wave dissipation in coronal arches is demonstrated. An eikonal formulation makes it possible to account for the complicated magnetic geometry typical in coronal loops. An interpretation of Alfven wave resonance is given in terms of gradient steepening, and dissipation efficiencies are studied for two configurations: the well-known slab model with a straight magnetic field, and a new model with stochastic field lines. It is shown that a large fraction of the Alfven wave energy flux can be effectively dissipated in the corona.

Similon, Philippe L.↗

Lithium Divertor Targets and Walls for the ASTER Liquid Stellarator Reactor, Distributed Divertor

Stellarators may have advantages for certain liquid metal options as Plasma Facing Components (PFC) for divertor targets and first walls due to the wide range of possible magnetic configurations, which additionally are free of disruptions and fast field variations. In a previous work (V. Queral et al., IEEE Trans. Plasma Sci. 52, 2024), a concept of stellarator reactor (ASTER-CP) based on swirling Li-molten salts and liquid lithium floating on the molten salt as PFC was presented. The divertor matters were not studied then and, thus, they are being studied and experimentally tested now. The ASTER-CP reactor concept, the initial liquid metal experiments and potential concepts for the ASTER-CP divertor and first wall are reported. Concerning the experiments, several small scale experiments of galinstan in a small rotating cylinder under magnetic field have been produced, including one experiment with high viscosity galinstan-mixture for increased thickness of layer. An experiment of floating lithium on the molten salt LiCl-PbCl2 gave fast volatilization/decomposition of the molten salt. Particularly for divertors, the traditional free-flow, Capillary Porous Systems and ‘divertorlets’ have been studied for application to ASTER-CP. Surface waves (hot spots), lack of enough surface fluid turbulence and excessive fluid speed are the main issues found in fast free-flow. The perhaps original concept of Distributed Divertor and Equi-power Surface is tentatively proposed and studied, taking advantage of stellarator fields and low recycling regime.

distributed divertor↗

Modeling coronal evolution

Helmet streamers on the sun were observed to be the site of coronal mass ejections, dynamic events that eject coronal plasma and magnetic fields into the solar wind. A two dimensional (azimuthally symmetric) helmet streamer configuration was developed by computing solutions of the time dependent magnetohydrodynamic (MHD) equations, for a specified magnetic flux distribution on the sun. The helmet streamer is not symmetric about the equator. The evolution of the configuration, when differential rotation is applied, was investigated. It was found that after many rotations the configuration does not reach a steady state, but disrupts recurrently with the ejection of a plasmoid. These results suggest that differential rotation may be one of the mechanisms by which mass ejections are initiated.

Linker, Jon A.↗

THE ROLE OF ACTIVE REGION LOOP GEOMETRY. I. HOW CAN IT AFFECT CORONAL SEISMOLOGY?

We present numerical results of coronal loop oscillation excitation using a three-dimensional (3D) MHD model of an idealized active region (AR) field. The AR is initialized as a potential dipole magnetic configuration with gravitationally stratified density and contains a loop with a higher density than its surroundings. We study different ways of excitation of vertical kink oscillations of this loop by velocity: as an initial condition, and as an impulsive excitation with a pulse of a given position, duration, and amplitude. We vary the geometry of the loop in the 3D MHD model and find that it affects both the period of oscillations and the synthetic observations (difference images) that we get from oscillations. Due to the overestimated effective length of the loop in the case of loops which have maximum separation between their legs above the footpoints (>50% of observed loops), the magnetic field obtained from coronal seismology can also be overestimated. The 3D MHD model shows how the accuracy of magnetic field strength determined from coronal seismology can be improved. We study the damping mechanism of the oscillations and find that vertical kink waves in 3D stratified geometry are damped mainly due to wave leakage in the horizontal direction.

79 ASTRONOMY AND ASTROPHYSICS↗

Technical Note: Development and performance of a software tool for quality assurance of online replanning with a conventional Linac or MR-Linac

Purpose: To develop an integrated quality assurance (QA) software tool for online replanning capable of efficiently and automatically checking radiation treatment (RT) planning parameters and gross plan quality, verifying treatment plan data transfer from treatment planning system (TPS) to record and verify (R&V) system, performing a secondary monitor unit (MU) calculation with or without a presence of a magnetic field from MR-Linac, and validating the delivery record consistency with the plan. Methods: The software tool, named ArtQA, was developed to obtain and compare plan and treatment parameters from both the TPS and the R&V system database. The TPS data are accessed via direct file reading and the R&V data are retrieved via open database connectivity and structured query language. Plan quality is evaluated with both the logical consistency of planning parameters and the achieved dose–volume histograms. Beams in between the TPS and R&V system are matched based on geometry configurations. To consider the effect of a 1.5 T transverse magnetic field from MR-Linac in the secondary MU calculation, a method based on modified Clarkson integration algorithm was developed and tested for a series of clinical situations. Results: ArtQA has been used in their clinic and can quickly detect inconsistencies and deviations in the entire RT planning process. With the use of the ArtQA tool, the efficiency for plan check including plan quality, data transfer, and delivery check can be improved by at least 60%. The newly developed independent MU calculation tool for MR-Linac reduces the difference between the plan and calculated MUs by 10%. Conclusions: The software tool ArtQA can be used to perform a comprehensive QA check from planning to delivery with conventional Linac or MR-Linac and is an essential tool for online replanning where the QA check needs to be performed rapidly.

60 APPLIED LIFE SCIENCES↗

Disruption of a helmet streamer by photospheric shear

Helmet streamers on the Sun have been observed to be the site of coronal mass ejections, dynamic events that eject coronal plasma and magnetic fields into the solar wind. We develop a two-dimensional (azimuthally symmetric) helmet streamer configuration by computing solutions of the time-dependent magnetohydrodynamic (MHD) equations, and we investigate the evolution of the configuration when photospheric shearing motions are imposed. We find that the configuration disrupts when a critical shear is exceeded, ejecting a plasmoid into the solar wind. The results are similar to the case of a sheared dipole magnetic field in a hydrostatic atmosphere (Mikic & Linker 1994). However, the presence of the outflowing solar wind makes the disruption significantly more energetic when a helmet streamer is sheared. Our resutls suggest that shearing of helmet streamers may initiate coronal mass ejections.

Linker, Jon A.↗

Particle Motion and Energization in a Chaotic Magnetic Field

In nature there are many systems where macroscopic and time varying currents exist. For example, in solar flares, currents in the form of filaments and/or loops have been observed. In a simple asymmetric configuration where steady state currents flow through a straight wire and a loop, a somewhat surprising feature is that the resulting magnetic field can become chaotic depending on the relative size of the currents. This implies that studying particle motion in a time-dependent chaotic magnetic field is a fundamental problem in space plasma physics and it has profound implications to astrophysical phenomena as the solar flares. Because these currents are time dependent, they induce electric fields. Consequently, electrons and ions moving in the field can experience alternating acceleration and deceleration, leading to a second order Fermi acceleration. We discuss here charged particle motion in a chaotic magnetic fields and the energization process. Particle trajectories are obtained by following single particle motion using the Lorentz equation by a 4-th order Runge-Kutta scheme. Implications of our results to particle acceleration and heating at a flare site are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

SOLAR PROMINENCES EMBEDDED IN FLUX ROPES: MORPHOLOGICAL FEATURES AND DYNAMICS FROM 3D MHD SIMULATIONS

The temporal evolution of a solar prominence inserted in a three-dimensional magnetic flux rope is investigated numerically. Using the model of Titov and Démoulin under the regime of weak twist, the cold and dense prominence counteracts gravity by modifying the initially force-free magnetic configuration. In some cases a quasi-stationary situation is achieved after the relaxation phase, characterized by the excitation of standing vertical oscillations. These oscillations show a strong attenuation with time produced by the mechanism of continuum damping due to the inhomogeneous transition between the prominence and solar corona. The characteristic period of the vertical oscillations does not depend strongly on the twist of the flux rope. Nonlinearity is responsible for triggering the Kelvin–Helmholtz instability associated with the vertical oscillations and that eventually produces horizontal structures. Contrary to other configurations in which the longitudinal axis of the prominence is permeated by a perpendicular magnetic field, like in unsheared arcades, the orientation of the prominence along the flux rope axis prevents the development of Rayleigh–Taylor instabilities and therefore the appearance of vertical structuring along this axis.

79 ASTRONOMY AND ASTROPHYSICS↗