Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,710 records · Page 95

Investigation of emitting centers in SiO{sub 2} codoped with silicon nanoclusters and Er{sup 3+} ions by cathodoluminescence technique

This study reports on the investigation and characterization of the different emitting centers within SiO{sub 2} codoped by Er{sup 3+} ions and silicon-excess. Erbium doped silicon-rich silicon oxide (SRSO:Er) thin films, fabricated by magnetron cosputtering at 500 deg. C, were analyzed by means of cathodoluminescence. The CL spectra of SRSO, Er-doped SiO{sub 2} and SRSO:Er were recorded and compared for various annealing temperatures. It was found that some specific optically-active point-defects called silicon-oxygen-deficient centers (SiODCs) are present in all kinds of samples. In the layers containing some excess Si, the phase separation between Si nanoclusters (Si-ncs) and SiO{sub 2} is observed when the annealing temperature reaches and exceeds 900 deg. C. The formation of Si-nc increases with annealing at the expense of SiODCs that was assumed to act as seeds for the growth of Si-nc. For SRSO:Er samples, the contribution of SiODCs overlaps that due to Er{sup 3+} transitions in the visible range. The emissions from SiODCs are drastically reduced when an SRSO sample is doped with Er ions, whereas the Er emissions in the visible range start to be distinctly observed. We propose a scenario of energy transfer from SiODCs toward the Er ions, especially as the emissions from the Si-based entities (SiODCs, Si-nc) and from some transitions of Er ions are located in a same visible broad range.

36 MATERIALS SCIENCE↗

Enhancement in the photocatalytic nature of nitrogen-doped PVD-grown titanium dioxide thin films

Nitrogen-doped titanium dioxide semiconductor photocatalytic thin films have been deposited by unbalanced reactive magnetron physical vapor deposition on glass substrates for self-cleaning applications. In order to increase the photocatalytic efficiency of the titania coatings, it is important to enhance the catalysts absorption of light from the solar spectra. Bearing this fact in mind, a reduction in the titania semiconductor band-gap has been attempted by using nitrogen doping from a coreactive gas mixture of N{sub 2}:O{sub 2} during the titanium sputtering process. Rutherford backscattering spectroscopy was used in order to assess the composition of the titania thin films, whereas heavy-ion elastic recoil detection analysis granted the evaluation of the doping level of nitrogen. X-ray photoelectron spectroscopy provided valuable information about the cation-anion binding within the semiconductor lattice. The as-deposited thin films were mostly amorphous, however, after a thermal annealing in vacuum at 500 deg. C the crystalline polymorph anatase and rutile phases have been developed, yielding an enhancement in the crystallinity. Spectroscopic ellipsometry experiments enabled the determination the refractive index of the thin films as a function of the wavelength, while from the optical transmittance it was possible to estimate the semiconductor indirect band-gap of these coatings, which has been proven to decrease as the N-doping increases. The photocatalytic performance of the titania films has been characterized by the degradation rate of an organic reactive dye under UV/visible irradiation. It has been found that for a certain critical limit of 1.19 at. % of nitrogen doping in the titania anatase crystalline lattice enhances the photocatalytic behavior of the thin films and it is in accordance with the observed semiconductor band-gap narrowing to 3.18 eV. By doping the titania lattice with nitrogen, the photocatalytic activity is enhanced under both UV and visible light.

36 MATERIALS SCIENCE↗

Investigation of Fe-Si-N films as magnetic overcoat for high density recording disk drives

A 50-nm-thick Fe-Si-N films were deposited via reactive magnetron cosputtering of independent Fe and Si targets, in Ar/N{sub 2} gas mixture, under different dc Fe target power conditions. Magnetic properties, mechanical hardness and tribological properties were characterized as a function of the Fe target power by magnetometry, nanoindentation, and nanoscratch testing, respectively. Deposited samples were found to be ferromagnetic with a coercivity of approximately 20 Oe and a saturation magnetization increasing from 200 to 1100 emu/cm{sup 3} as a function of Fe sputter power, i.e., values typical of soft magnetic materials. The mechanical hardness was found to be between 50% and 70% of the hardness of a pure SiN{sub x} film. Nanotribological properties of films deposited with a Fe target power {>=}80 W degraded rapidly.

36 MATERIALS SCIENCE↗

Downstream plasma transport and metal ionization in a high-powered pulsed-plasma magnetron

Downstream plasma transport and ionization processes in a high-powered pulsed-plasma magnetron were studied. The temporal evolution and spatial distribution of electron density (n{sub e}) and temperature (T{sub e}) were characterized with a 3D scanning triple Langmuir probe. Plasma expanded from the racetrack region into the downstream region, where a high n{sub e} peak was formed some time into the pulse-off period. The expansion speed and directionality towards the substrate increased with a stronger magnetic field (B), largely as a consequence of a larger potential drop in the bulk plasma region during a relatively slower sheath formation. The fraction of Cu ions in the deposition flux was measured on the substrate using a gridded energy analyzer. It increased with higher pulse voltage. With increased B field from 200 to 800 Gauss above racetrack, n{sub e} increased but the Cu ion fraction decreased from 42% to 16%. A comprehensive model was built, including the diffusion of as-sputtered Cu flux, the Cu ionization in the entire plasma region using the mapped n{sub e} and T{sub e} data, and ion extraction efficiency based on the measured plasma potential (V{sub p}) distribution. The calculations matched the measurements and indicated the main causes of lower Cu ion fractions in stronger B fields to be the lower T{sub e} and inefficient ion extraction in a larger pre-sheath potential.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Erosion rates of diffuse and constricted magnetron discharges in helium over aluminium, gallium, molybdenum, and tantalum

Magnetically-enhanced discharge plasmas in light monatomic gases such as helium may have applicability in future electric power grid switches. For practical use of a gas discharge switch in power conversion the net cathode erosion rate must be sufficiently low to enable stable operation over an extended life. We have found that magnetically-enhanced He plasmas at pressures of 200–800 mTorr can operate in one of several distinct modes that are characterized by the plasma geometry (diffuse, constricted) and motion (stationary, orbiting, slow). The erosion rates of various cathode materials (aluminium, gallium, molybdenum, and tantalum) were measured in both diffuse and constricted, magnetized He plasmas. The constricted orbiting (CO) mode exhibited a lower erosion rate than either the diffuse stationary or constricted slow modes, even when comparing loss rates against a cathode material that was more liable to sputter (e.g. aluminium versus molybdenum). However, the erosion rate for operation in the CO mode was still found to be significantly higher than required for practical use in a gas discharge switch.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Morphology of size-selected copper nanocluster film

We report a preliminary study of the morphology of size-selected Copper nanocluster film grown on Si substrate using a state of the art nanocluster deposition system. The clusters are produced in a dc magnetron and gasaggregation type cluster source at room temperature. The size or mass of the nanoclusters are analysed by a quadrupole mass filter. The morphology of cluster assembled surface has been investigated by Scanning electron microscopy (SEM) and atomic force microscopy (AFM).

36 MATERIALS SCIENCE↗

Energy transfer and 1.54 {mu}m emission in amorphous silicon nitride films

Er-doped amorphous silicon nitride films with various Si concentrations (Er:SiN{sub x}) were fabricated by reactive magnetron cosputtering followed by thermal annealing. The effects of Si concentrations and annealing temperatures were investigated in relation to Er emission and excitation processes. Efficient excitation of Er ions was demonstrated within a broad energy spectrum and attributed to disorder-induced localized transitions in amorphous Er:SiN{sub x}. A systematic optimization of the 1.54 {mu}m emission was performed and a fundamental trade-off was discovered between Er excitation and emission efficiency due to excess Si incorporation. These results provide an alternative approach for the engineering of sensitized Si-based light sources and lasers.

36 MATERIALS SCIENCE↗

Postannealing effect on properties of hydrogenated amorphous Si(Mn) magnetic semiconductors

Postannealing effect was studied on films of hydrogenated amorphous silicon with Mn addition grown by magnetron cosputtering. Structural, magnetic, and electrical properties were investigated. We did not detect any second phases or clusters after annealing. Annealing enhances saturation magnetization, electrical conductivity, and carrier concentration by about 250%, 350%, and two orders of magnitude, respectively. Anomalous Hall effect was observed at 100 K, indicating ferromagnetism mediated by charge carriers. Moreover, the hydrogen concentration was determined by elastic recoil detection methods. The results revealed that there is no hydrogen effusion during annealing. The reason of property enhancement by annealing arises from the thermal energy to promote hydrogen diffusion; hence, a more homogeneous distribution and lessens defect density.

36 MATERIALS SCIENCE↗

W-doped anatase TiO{sub 2} transparent conductive oxide films: Theory and experiment

W-doped anatase TiO{sub 2} films were deposited on glass substrate by magnetron cosputtering. The minimum resistivity, 1.5x10{sup -2} {Omega} cm, for Ti{sub 1-x}W{sub x}O{sub 2} film (x=0.063) was obtained. X-ray photoelectron spectroscopy analysis shows W incorporated in the Ti lattice position is mostly in the W{sup 6+} state. Theoretical calculations based upon the density-functional theory were applied to analyze the electronic structure and conducting mechanism. The strong hybridization of Ti 3d states with W 5d states is the dominate factor to cause the shifting in Fermi level into conduction band. Our results suggest that tungsten is a favorable dopant to form TiO{sub 2}-based transparent conducting oxide materials.

36 MATERIALS SCIENCE↗

Efficient energy transfer from Si-nanoclusters to Er ions in silica induced by substrate heating during deposition

This study investigates the influence of the deposition temperature T{sub d} on the Si-mediated excitation of Er ions within silicon-rich silicon oxide layers obtained by magnetron cosputtering. For T{sub d} exceeding 200 deg. C, an efficient indirect excitation of Er ions is observed for all as-deposited samples. The photoluminescence intensity improves gradually up to a maximum at T{sub d}=600 deg. C before decreasing for higher T{sub d} values. The effects of this ''growth-induced annealing'' are compared to those resulting from the same thermal budget used for the ''classical'' approach of postdeposition annealing performed after a room temperature deposition. It is demonstrated that the former approach is highly beneficial, not only in terms of saving time but also in the fourfold enhancement of the Er photoluminescence efficiency.

36 MATERIALS SCIENCE↗

Influence of strain and grain boundary variations on magnetism of Cr-doped AlN films

Cr-doped AlN films are prepared by reactive dc magnetron cosputtering under a negative substrate bias ranging from 50 to 110 V. The bias induces variation of the texture from (002) to (110) orientation, enhances the stress and reduces the grain size in the films. All of the samples are ferromagnetic. The atomic magnetic moment (AMM) of Cr increases with the bias from 50 to 90 V and reaches the maximum of 0.18mu{sub B}/Cr at a bias of 90 V. As the bias increases further to 110 V, the AMM decreases. The dielectric constant also changes in the same trend with the bias, as well as the AMM does. The variations in these two properties are determined by the collective effects of the lattice deformations induced by the changing stress, the amount of boundary defects and the grain size in the films.

36 MATERIALS SCIENCE↗

Amorphous copper tungsten oxide with tunable band gaps

We report on the synthesis of amorphous copper tungsten oxide thin films with tunable band gaps. The thin films are synthesized by the magnetron cosputtering method. We find that due to the amorphous nature, the Cu-to-W ratio in the films can be varied without the limit of the solubility (or phase separation) under appropriate conditions. As a result, the band gap and conductivity type of the films can be tuned by controlling the film composition. Unfortunately, the amorphous copper tungsten oxides are not stable in aqueous solution and are not suitable for the application of photoelectrochemical splitting of water. Nonetheless, it provides an alternative approach to search for transition metal oxides with tunable band gaps.

36 MATERIALS SCIENCE↗

Granular L1{sub 0} FePt-X (X=C, TiO{sub 2}, Ta{sub 2}O{sub 5}) (001) nanocomposite films with small grain size for high density magnetic recording

FePt-X (X=C, TiO{sub 2}, Ta{sub 2}O{sub 5}) nanocomposite films were deposited on MgO/CrRu/glass substrates at 350 deg. C by magnetron cosputtering. The comparison investigations on the magnetic properties and microstructure of FePt-X films with various dopants were conducted. All FePt-X films showed (001) preferred orientation and oxide dopants promoted the formation of magnetically soft fcc FePt phase. With 15 vol % C doping, FePt-C film with columnar grains of 7.5 nm was obtained and the out-of-plane coercivity measured at room temperature was as high as 14.4 kOe. The increase in carbon volume fraction to 20% caused the formation of two-layer structure, whereas for the 20 vol % TiO{sub 2} and Ta{sub 2}O{sub 5} doping, the columnar structure of the FePt films remained and the corresponding grain sizes were 5 and 10 nm, respectively. Ta{sub 2}O{sub 5} doping showed better grain isolation than the others. The out-of-plane coercivities of FePt-TiO{sub 2} and FePt-Ta{sub 2}O{sub 5} films were 7.5 and 8.8 kOe, respectively.

36 MATERIALS SCIENCE↗

Structure and corrosion behavior of platinum/ruthenium/nitrogen doped diamondlike carbon thin films

Platinum/ruthenium/nitrogen doped diamondlike carbon (PtRuN-DLC) thin films were deposited on p-Si (100) substrates with dc magnetron cosputtering by varying the dc power applied to a Pt{sub 50}Ru{sub 50} target to investigate the effect of Pt and Ru incorporation in the films on the bonding structure, adhesion strength, surface morphology, and corrosion behavior of the films by means of X-ray photoelectron spectroscopy, micro-Raman spectroscopy, microscratch test, atomic force microscopy, scanning electron microscopy, and potentiodynamic polarization test. It was found that the incorporation of Pt and Ru in the N-DLC films improved the corrosion resistance of the films in a 0.1M NaCl solution at lower polarization potentials though more sp{sup 2} bonds were formed in the films. However, the films with higher Pt and Ru contents degraded earlier than the ones with lower Pt and Ru contents at higher polarization potentials.

36 MATERIALS SCIENCE↗

Aluminum incorporation in Ti{sub 1-x}Al{sub x}N films studied by x-ray absorption near-edge structure

The local bonding structure of titanium aluminum nitride (Ti{sub 1-x}Al{sub x}N) films grown by dc magnetron cosputtering with different AlN molar fractions (x) has been studied by x-ray absorption near-edge structure (XANES) recorded in total electron yield mode. Grazing incidence x-ray diffraction (GIXRD) shows the formation of a ternary solid solution with cubic structure (c-Ti{sub 1-x}Al{sub x}N) that shrinks with the incorporation of Al and that, above a solubility limit of xapprox0.7, segregation of w-AlN and c-Ti{sub 1-x}Al{sub x}N phases occurs. The Al incorporation in the cubic structure and lattice shrinkage can also be observed using XANES spectral features. However, contrary to GIXRD, direct evidence of w-AlN formation is not observed, suggesting a dominance and surface enrichment of cubic environments. For x>0.7, XANES shows the formation of Ti-Al bonds, which could be related to the segregation of w-AlN. This study shows the relevance of local-order information to assess the atomic structure of Ti{sub 1-x}Al{sub x}N solutions.

36 MATERIALS SCIENCE↗

Conduction noise absorption by ITO thin films attached to microstrip line utilizing Ohmic loss

For the aim of wide-band noise absorbers with a special design for low frequency performance, this study proposes conductive indium-tin oxide (ITO) thin films as the absorbent materials in microstrip line. ITO thin films were deposited on the polyimide film substrates by rf magnetron cosputtering of In{sub 2}O{sub 3} and Sn targets. The deposited ITO films show a typical value of electrical resistivity ({approx}10{sup -4} {Omega} m) and sheet resistance can be controlled in the range of 20-230 {Omega} by variation in film thickness. Microstrip line with characteristic impedance of 50 {Omega} was used for determining their noise absorbing properties. It is found that there is an optimum sheet resistance of ITO films for the maximum power absorption. Reflection parameter (S{sub 11}) is increased with decrease in sheet resistance due to impedance mismatch. On the while, transmission parameter (S{sub 21}) is decreased with decrease in sheet resistance due to larger Ohmic loss of the ITO films. Experimental results and computational prediction show that the optimum sheet resistance is about 100 {Omega}. For this film, greater power absorption is predicted in the lower frequency region than ferrite thin films of high magnetic loss, which indicates that Ohmic loss is the predominant loss parameter for power absorption in the low frequency range.

36 MATERIALS SCIENCE↗

Light absorption in silicon quantum dots embedded in silica

The photon absorption in Si quantum dots (QDs) embedded in SiO{sub 2} has been systematically investigated by varying several parameters of the QD synthesis. Plasma-enhanced chemical vapor deposition (PECVD) or magnetron cosputtering (MS) have been used to deposit, upon quartz substrates, single layer, or multilayer structures of Si-rich-SiO{sub 2} (SRO) with different Si content (43-46 at. %). SRO samples have been annealed for 1 h in the 450-1250 deg. C range and characterized by optical absorption measurements, photoluminescence analysis, Rutherford backscattering spectrometry and x-ray Photoelectron Spectroscopy. After annealing up to 900 deg. C SRO films grown by MS show a higher absorption coefficient and a lower optical bandgap (approx2.0 eV) in comparison with that of PECVD samples, due to the lower density of Si-Si bonds and to the presence of nitrogen in PECVD materials. By increasing the Si content a reduction in the optical bandgap has been recorded, pointing out the role of Si-Si bonds density in the absorption process in small amorphous Si QDs. Both the photon absorption probability and energy threshold in amorphous Si QDs are higher than in bulk amorphous Si, evidencing a quantum confinement effect. For temperatures higher than 900 deg. C both the materials show an increase in the optical bandgap due to the amorphous-crystalline transition of the Si QDs. Fixed the SRO stoichiometry, no difference in the optical bandgap trend of multilayer or single layer structures is evidenced. These data can be profitably used to better implement Si QDs for future PV technologies.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Concentration dependence of the Er{sup 3+} visible and infrared luminescence in Y{sub 2-x}Er{sub x}O{sub 3} thin films on Si

Y{sub 2-x}Er{sub x}O{sub 3} thin films, with x varying between 0 and 0.72, have been successfully grown on crystalline silicon (c-Si) substrates by radio-frequency magnetron cosputtering of Y{sub 2}O{sub 3} and Er{sub 2}O{sub 3} targets. As-deposited films are polycrystalline, showing the body-centered cubic structure of Y{sub 2}O{sub 3}, and show only a slight lattice parameter contraction when x is increased, owing to the insertion of Er ions. All the films exhibit intense Er-related optical emission at room temperature both in the visible and infrared regions. By studying the optical properties for different excitation conditions and for different Er contents, all the mechanisms (i.e., cross relaxations, up-conversions, and energy transfers to impurities) responsible for the photoluminescence (PL) emission have been identified, and the existence of two different well-defined Er concentration regimes has been demonstrated. In the low concentration regime (x up to 0.05, Er-doped regime), the visible PL emission reaches its highest intensity, owing to the influence of up-conversions, thus giving the possibility of using Y{sub 2-x}Er{sub x}O{sub 3} films as an up-converting layer in the rear of silicon solar cells. However, most of the excited Er ions populate the first two excited levels {sup 4}I{sub 11/2} and {sup 4}I{sub 13/2}, and above a certain excitation flux a population inversion condition between the former and the latter is achieved, opening the route for the realization of amplifiers at 2.75 mum. Instead, in the high concentration regime (Er-compound regime), an increase in the nonradiative decay rates is observed, owing to the occurrence of cross relaxations or energy transfers to impurities. As a consequence, the PL emission at 1.54 mum becomes the most intense, thus determining possible applications for Y{sub 2-x}Er{sub x}O{sub 3} as an infrared emitting material.

36 MATERIALS SCIENCE↗