Search NASA⌕ Search

SEARCH · Search NASA

Results for “MONOCRYSTALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Ultrafast switching in wetting properties of TiO{sub 2}/YSZ/Si(001) epitaxial heterostructures induced by laser irradiation

We have demonstrated dark hydrophilicity of single crystalline rutile TiO{sub 2}(100) thin films, in which rapid switching from a hydrophobic to a hydrophilic surface was achieved using nanosecond excimer laser irradiation. The TiO{sub 2}/YSZ/Si(001) single crystalline heterostructures were grown by pulsed laser deposition and were subsequently irradiated by a single pulse of a KrF excimer laser at several energies. The wettability of water on the surfaces of the samples was evaluated. The samples were hydrophobic prior to laser annealing and turned hydrophilic after laser annealing. Superhydrophilic surfaces were obtained at higher laser energy densities (e.g., 0.32 J.cm{sup -2}). The stoichiometries of the surface regions of the samples before and after laser annealing were examined using XPS. The results revealed the formation of oxygen vacancies on the surface, which are surmised to be responsible for the observed superhydrophilic behavior. According to the AFM images, surface smoothening was greater in films that were annealed at higher laser energy densities. The samples exhibited hydrophobic behavior after being placed in ambient atmosphere. The origin of laser induced wetting behavior was qualitatively understood to stem from an increase of point defects near the surface, which lowered the film/water interfacial energy. This type of rapid hydrophobic/hydrophilic switching may be used to facilitate fabrication of electronic and photonic devices with novel properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical properties of Eu{sup 2+} doped antipervoskite fluoride single crystals

Single crystals of pure and Eu{sup 2+} doped LiBaF{sub 3} have been grown from melt by using a vertical Bridgman-Stockbarger method. Absorption and luminescence spectra for pure and rare-earth-doped LiBaF{sub 3} were studied. At ambient conditions the photoluminescence spectra consisted of sharp lines peaked at {approx}359 nm attributed to the {sup 6}P7/2{yields}{sup 8}S7/2 transitions in the 4f{sub 7} electronic configuration of Eu{sup 2+} and a broad band extending between 370 and 450 nm attributed to Eu{sup 2+} trapped exciton recombination. The effect of {sup 60}Co gamma irradiation has also been investigated.

36 MATERIALS SCIENCE↗

Structural, morphological and electrical studies of lithium ion irradiated sodium potassium niobate single crystal grown by flux method

Single crystals of sodium potassium niobate (K{sub 0.5}Na{sub 0.5})NbO{sub 3} (KNN) were grown by flux method and crystals were irradiated with 45 MeV Li ions to modify the electrical properties. Energy of the irradiated heavy ion was lower than the threshold energy to produce columnar defect and only clusters of defect was observed. The surface morphology of the irradiated single crystals was studied using scanning electron microscope (SEM) and atomic force microscope (AFM). The results show that the surface roughness value was found to increase with increasing fluence.

36 MATERIALS SCIENCE↗

Development of scintillation materials for medical imaging and other applications

Scintillation materials that produce pulses of visible light in response to the absorption of energetic photons, neutrons, and charged particles, are widely used in various applications that require the detection of radiation. The discovery and development of new scintillators has accelerated in recent years, due in large part to their importance in medical imaging as well as in security and high energy physics applications. Better understanding of fundamental scintillation mechanisms as well as the roles played by defects and impurities have aided the development of new high performance scintillators for both gamma-ray and neutron detection. Although single crystals continue to dominate gamma-ray based imaging techniques, composite materials and transparent optical ceramics potentially offer advantages in terms of both synthesis processes and scintillation performance. A number of promising scintillator candidates have been identified during the last few years, and several are currently being actively developed for commercial production. Purification and control of raw materials and cost effective crystal growth processes can present significant challenges to the development of practical new scintillation materials.

36 MATERIALS SCIENCE↗

Formation of a ZnO{sub 2} layer on the surface of single crystal ZnO substrates with oxygen atoms by hydrogen peroxide treatment

Formation of a ZnO{sub 2} layer by H{sub 2}O{sub 2} treatment for single crystal ZnO (0001) substrates was studied. X-ray diffraction (XRD) peaks of ZnO{sub 2} with a pyrite structure were observed in XRD 2{theta}-{omega} scan patterns of the O-face of single crystal ZnO (0001) substrates with H{sub 2}O{sub 2} treatment, but these peaks were not observed in patterns of the Zn-face of ZnO (0001) substrates with H{sub 2}O{sub 2} treatment. XRD {omega} scan patterns of the ZnO (0002) plane of the O-face of single crystal ZnO (0001) substrates were broadened at the tail of the pattern by H{sub 2}O{sub 2} treatment, but such broadening was not observed in that plane of the Zn-face. Grain structure of ZnO{sub 2} layers was clearly observed in atomic force microscopy (AFM) images for the O-face of ZnO (0001) substrates with H{sub 2}O{sub 2} treatment. Spectra of X-ray photoelectron spectroscopy (XPS) of the O-face of ZnO (0001) substrates with H{sub 2}O{sub 2} treatment showed a definite peak shift of the O 1s peak. It is thought that a pyrite structure of ZnO{sub 2} is easily formed around an O atom of the O-face of ZnO (0001) substrates. Results of XRD measurements, the AFM image, and XPS measurement of the H{sub 2}O{sub 2}-treated single crystal ZnO (1010) substrate that has oxygen atoms on the surface appeared to be the same as those of the O-face of ZnO (0001) substrates.

36 MATERIALS SCIENCE↗

An experimental system for high temperature X-ray diffraction studies with in situ mechanical loading

An experimental system with in situ thermomechanical loading has been developed to enable high energy synchrotron x-ray diffraction studies of crystalline materials. The system applies and maintains loads of up to 2250 N in uniaxial tension or compression at a frequency of up to 100 Hz. The furnace heats the specimen uniformly up to a maximum temperature of 1200 Degree-Sign C in a variety of atmospheres (oxidizing, inert, reducing) that, combined with in situ mechanical loading, can be used to mimic processing and operating conditions of engineering components. The loaded specimen is reoriented with respect to the incident beam of x-rays using two rotational axes to increase the number of crystal orientations interrogated. The system was used at the Cornell High Energy Synchrotron Source to conduct experiments on single crystal silicon and polycrystalline Low Solvus High Refractory nickel-based superalloy. The data from these experiments provide new insights into how stresses evolve at the crystal scale during thermomechanical loading and complement the development of high-fidelity material models.

36 MATERIALS SCIENCE↗

Biparametric analyses of charge trapping in Cd{sub 0.9}Zn{sub 0.1}Te based virtual Frisch grid detectors

Detector grade Cd{sub 0.9}Zn{sub 0.1}Te (CZT) single crystals were grown from zone refined Cd, Zn, and Te ({approx}7 N) precursor materials, using a tellurium solvent method. Detectors with virtual Frisch grid configuration were fabricated using these crystals. I-V measurements revealed low leakage currents at room-temperature, {approx}11 nA for one such detector D1 and {approx}8 nA for another detector D2 at 1100 V. The spectroscopic performances of the two CZT virtual Frisch grid detectors have been evaluated and compared for high energy gamma ray detection. Detector D1 showed a well-resolved pulse-height spectrum with an energy resolution of {approx}1.6% for the 662 keV gamma rays. Detector D2 also showed a distinct 662 keV peak but with a broader pulse-height distribution. A digital biparametric correlation study of the depth of interaction and energy deposited by the 662 keV gamma rays was carried out. A different kind of correlation pattern from that observed normally for hole trapping was noticed in the case of detector D2. Correlation of results from thermally stimulated current measurement studies suggested that the anomalous biparametric correlation pattern was due to the trapping of holes but modified by the virtual Frisch grid effect. The results also suggested that the effect of electron trapping could not be ruled out either. Finally, a digital correction scheme was applied to recover the {sup 137}Cs spectrum from the effect of charge loss.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The influence of laser-induced nanosecond rise-time stress waves on the microstructure and surface chemical activity of single crystal Cu nanopillars

An apparatus and test procedure for fabrication and loading of single crystal metal nanopillars under extremely high pressures (>1 GPa) and strain rates (>10{sup 7} s{sup -1}), using laser-generated stress waves, are presented. Single-crystalline Cu pillars ({approx}1.20 {mu}m in tall and {approx}0.45 {mu}m in diameter) prepared via focused ion beam milling of Cu(001) substrates are shock-loaded using this approach with the dilatational stress waves propagating along the [001] axis of the pillars. Transmission electron microscopy observations of shock-loaded pillars show that dislocation density decreases and that their orientation changes with increasing stress wave amplitude, indicative of dislocation motion. The shock-loaded pillars exhibit enhanced chemical reactivity when submerged in oil and isopropyl alcohol solutions, due likely to the exposure of clean surfaces via surface spallation and formation of surface steps and nanoscale facets through dislocation motion to the surface of the pillars, resulting in growth of thin oxide films on the surfaces of the pillars.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Peculiarly strong room-temperature ferromagnetism from low Mn-doping in ZnO grown by molecular beam epitaxy

Strong room-temperature ferromagnetism is demonstrated in single crystalline Mn-doped ZnO thin films grown by molecular beam epitaxy. Very low Mn doping concentration is investigated, and the measured magnetic moment is much larger than what is expected for an isolated ion based on Hund's rules. The ferromagnetic behavior evolves with Mn concentration. Both magnetic anisotropy and anomalous Hall effect confirm the intrinsic nature of ferromagnetism. While the Mn dopant plays a crucial role, another entity in the system is needed to explain the observed large magnetic moments.

36 MATERIALS SCIENCE↗

Adsorption geometry, conformation, and electronic structure of 2H-octaethylporphyrin on Ag(111) and Fe metalation in ultra high vacuum

Due to the growing interest in the ferromagnetic properties of Fe-octaethylporphyrins (Fe-OEP) for applications in spintronics, methods to produce stable Fe-porphyrins with no Cl atoms are highly demanded. Here, we demonstrate the formation of Fe-OEP layers on Ag(111) single crystal by the ultra high vacuum in situ metalation of the free-base 2H-2,3,7,8,12,13,17,18-octaethylporphyrin (2H-OEP) molecules. The metalation proceeds exactly as in the case of 2H-5,10,15,20-tetraphenylporphyrin (2H-TPP) on the same substrate. An extensive surface characterization by means of X-ray photoemission spectroscopy, valence band photoemission, and NEXAFS with synchrotron radiation light provides information on molecular conformation and electronic structure in the monolayer and multilayer cases. We demonstrate that the presence of the ethyl groups affects the tilt of the adsorbed molecules, the conformation of the macrocycle, and the polarization screening in multilayers, but has only a minor effect in the metalation process with respect to 2H-TPP.

36 MATERIALS SCIENCE↗

Metal-insulator transition induced in CaVO{sub 3} thin films

Stoichiometric CaVO{sub 3} (CVO) thin films of various thicknesses were grown on single crystal SrTiO{sub 3} (STO) (001) substrates using a pulsed electron-beam deposition technique. The CVO films were capped with a 2.5 nm STO layer. We observed a temperature driven metal-insulator transition (MIT) in CVO films with thicknesses below 4 nm that was not observed in either thick CVO films or STO films. The emergence of this MIT can be attributed to the reduction in effective bandwidth due to a crossover from a three-dimensional metal to a two-dimensional insulator. The insulating phase was only induced with a drive current below 0.1 {mu}A. X-ray absorption measurements indicated different electronic structures for thick and very thin films of CVO. Compared with the thick film ({approx}60 nm), thin films of CVO (2-4 nm) were more two-dimensional with the V charge state closer to V{sup 4+}.

36 MATERIALS SCIENCE↗

Vacuum annealed cerium-substituted yttrium iron garnet films on non-garnet substrates for integrated optical circuits

Polycrystalline cerium-substituted yttrium iron garnet (CeYIG) showing large Faraday rotation (FR) in the near-IR region was grown on non-garnet (synthetic fused silica, Si, and Si-on-insulator) substrates by sputtering followed by thermal annealing in vacuum. The FR of the films is comparable to the single crystal value. Structural characterization, magnetic properties, refractive index, extinction coefficient, surface topography, and FR vs. wavelength were measured and the magnetooptical figure of merit was compared with that of CeYIG films on garnet substrates.

36 MATERIALS SCIENCE↗

Metastable fcc-Fe film epitaxially grown on Cu(100) single-crystal underlayer

Fe film of 40 nm thickness is prepared on fcc-Cu(100) single-crystal underlayer at room temperature by ultra-high vacuum molecular beam epitaxy. The film growth and the detailed structure are investigated by reflection high-energy electron diffraction, cross-sectional high-resolution transmission electron microscopy (HR-TEM), and x-ray diffraction (XRD). An Fe single-crystal with metastable fcc structure nucleates on the underlayer. The HR-TEM shows that fcc lattice is formed from the Fe/Cu interface up to the film surface. A large number of misfit dislocations are introduced around the Fe/Cu interface due to an accommodation of lattice mismatch. Dislocations exist up to the film near surface. The lattice constant is estimated by XRD to be a = 0.3607 nm. The film shows a ferromagnetic property, which reflects the property of fcc-Fe crystal with high-spin ferromagnetic state.

36 MATERIALS SCIENCE↗

Structure, band gap, and Mn-related mid-gap states in epitaxial single crystal (Zn{sub 1-x}Mg{sub x}){sub 1-y}Mn{sub y}O thin films

Epitaxial (Zn{sub 1-x}Mg{sub x}){sub 1-y}Mn{sub y}O thin films were grown on c-Al{sub 2}O{sub 3} substrates by radio frequency oxygen plasma assisted molecular beam epitaxy. Single crystal structure of the (Zn{sub 1-x}Mg{sub x}){sub 1-y}Mn{sub y}O films was revealed by reflection high energy electron diffraction and X-ray diffraction. The band gap of the films can be tuned dramatically with increasing the Mg concentration, while the onset energy of Mn-related mid-gap absorption band only shows a small blue shift. Photoconductivity measurements indicate the Mn-related mid-gap states in (Zn{sub 1-x}Mg{sub x}){sub 1-y}Mn{sub y}O films can create free carriers and contribute to charge transfer transitions. The conduction band offset {Delta}E{sub C} = 0.13 eV and valence band offset {Delta}E{sub V} = 0.1 eV were obtained for ZnO/Zn{sub 0.8}Mg{sub 0.2}O heterostructures, which increase to {Delta}E{sub C} = 0.21 eV and {Delta}E{sub V} = 0.14 eV for ZnO/Zn{sub 0.7}Mg{sub 0.3}O heterostructures.

36 MATERIALS SCIENCE↗

The extended wedge method: Atomic force microscope friction calibration for improved tolerance to instrument misalignments, tip offset, and blunt probes

One of the major challenges in understanding and controlling friction is the difficulty in bridging the length and time scales of macroscale contacts and those of the single asperity interactions they comprise. While the atomic force microscope (AFM) offers a unique ability to probe tribological surfaces in a wear-free single-asperity contact, instrument calibration challenges have limited the usefulness of this technique for quantitative nanotribological studies. A number of lateral force calibration techniques have been proposed and used, but none has gained universal acceptance due to practical considerations, configuration limitations, or sensitivities to unknowable error sources. This paper describes a simple extension of the classic wedge method of AFM lateral force calibration which: (1) allows simultaneous calibration and measurement on any substrate, thus eliminating prior tip damage and confounding effects of instrument setup adjustments; (2) is insensitive to adhesion, PSD cross-talk, transducer/piezo-tube axis misalignment, and shear-center offset; (3) is applicable to integrated tips and colloidal probes; and (4) is generally applicable to any reciprocating friction coefficient measurement. The method was applied to AFM measurements of polished carbon (99.999% graphite) and single crystal MoS{sub 2} to demonstrate the technique. Carbon and single crystal MoS{sub 2} had friction coefficients of {mu}= 0.20 {+-} 0.04 and {mu}= 0.006 {+-} 0.001, respectively, against an integrated Si probe. Against a glass colloidal sphere, MoS{sub 2} had a friction coefficient of {mu}= 0.005 {+-} 0.001. Generally, the measurement uncertainties ranged from 10%-20% and were driven by the effect of actual frictional variation on the calibration rather than calibration error itself (i.e., due to misalignment, tip-offset, or probe radius).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Analysis of strained surface layers of ZnO single crystals after irradiation with intense femtosecond laser pulses

Structural modifications of ZnO single crystals that were created by the irradiation with femtosecond laser pulses at fluences far above the ablation threshold were investigated with micro-Raman spectroscopy. After light-matter interaction on the femtosecond time scale, rapid cooling and the pronounced thermal expansion anisotropy of ZnO are likely to cause residual strains of up to 1.8% and also result in the formation of surface cracks. This process relaxes the strain only partially and a strained surface layer remains. Our findings demonstrate the significant role of thermoelastic effects for the irradiation of solids with intense femtosecond laser pulses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Lattice mismatch-induced evolution of microstructural properties in FePt films

FePt (10, 20, 40, and 60 nm) films were fabricated on four different single crystal substrates [MgO (001), KTaO{sub 3} (001), SrTiO{sub 3} (001), and LaAlO{sub 3} (001)], and the effects of lattice mismatch on the microstructure and magnetic properties of FePt films were systematically investigated. The X-ray diffraction, scanning electron microscopy (SEM), and transmission electron microscopy (TEM) results showed that the different lattice mismatch between the substrates and FePt films resulted in the different crystallographic texture and microstructure of the FePt films. Under the tensile strain between the FePt and substrates (MgO, KTaO{sub 3}, SrTiO{sub 3}), the FePt films preferred to form L1{sub 0} FePt (001) texture. The perpendicular anisotropy of the FePt films grown on MgO was larger than that grown on KTaO{sub 3} and SrTiO{sub 3}. For the FePt films grown on the LaAlO{sub 3} substrate, both FePt (110) and (001) orientations were found, which indicated the presence of tensile and compressive strain, respectively. With the reduction of the lattice mismatch between the FePt (10 nm) and substrate from 5.8% (MgO) to 2.4% (KTaO{sub 3}), and 0.1% (SrTiO{sub 3}), the microstructure of the FePt films changed gradually from granular to continuous films (SEM and TEM results). The microstructure of the 10 nm FePt film grown on LaAlO{sub 3} substrate showed granular structure.

36 MATERIALS SCIENCE↗