Search NASA⌕ Search

SEARCH · Search NASA

Results for “Method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

A new comprehensive method for detection of livestock-related pathogenic viruses using a target enrichment system

Highlights: • Development of a comprehensive method to detect viruses using SureSelect system. • A method by which almost the full length of the viral genome can be determined without virus isolation. • Widely available methods for comprehensive analysis of virus genomic information. We tested usefulness of a target enrichment system SureSelect, a comprehensive viral nucleic acid detection method, for rapid identification of viral pathogens in feces samples of cattle, pigs and goats. This system enriches nucleic acids of target viruses in clinical/field samples by using a library of biotinylated RNAs with sequences complementary to the target viruses. The enriched nucleic acids are amplified by PCR and subjected to next generation sequencing to identify the target viruses. In many samples, SureSelect target enrichment method increased efficiencies for detection of the viruses listed in the biotinylated RNA library. Furthermore, this method enabled us to determine nearly full-length genome sequence of porcine parainfluenza virus 1 and greatly increased Breadth, a value indicating the ratio of the mapping consensus length in the reference genome, in pig samples. Our data showed usefulness of SureSelect target enrichment system for comprehensive analysis of genomic information of various viruses in field samples.

60 APPLIED LIFE SCIENCES↗

An updated Lagrangian discontinuous Galerkin hydrodynamic method for gas dynamics

Here, we present a new Lagrangian discontinuous Galerkin (DG) hydrodynamic method for gas dynamics. The new method evolves conserved unknowns in the current configuration, which obviates the Jacobi matrix that maps the element in a reference coordinate system or the initial coordinate system to the current configuration. The density, momentum, and total energy (ρ, ρu, E ) are approximated with conservative higher-order Taylor expansions over the element and are limited toward a piecewise constant field near discontinuities using a limiter. Two new limiting methods are presented for enforcing the bounds on the primitive variables of density, velocity, and specific internal energy (ρ, u, e). The nodal velocity, and the corresponding forces, are calculated by solving an approximate Riemann problem at the element nodes. An explicit second-order method is used to temporally advance the solution. This new Lagrangian DG hydrodynamic method conserves mass, momentum, and total energy. 1D Cartesian coordinates test problem results are presented to demonstrate the accuracy and convergence order of the new DG method with the new limiters.

97 MATHEMATICS AND COMPUTING↗

A higher-order Lagrangian discontinuous Galerkin hydrodynamic method for solid dynamics

We present a new multidimensional high-order Lagrangian discontinuous Galerkin (DG) hydrodynamic method that supports hypoelastic and hyperelastic strength models for simulating solid dynamics with higher-order elements. We also present new one-dimensional test problems that have an analytic solution corresponding to a hyperelastic–plastic wave. A modal DG approach is used to evolve fields relevant to conservation laws. These fields are approximated high-order Taylor series polynomials. The stress fields are represented using nodal quantities. The constitutive models used to calculate the deviatoric stress are either a hypoelastic–plastic, infinitesimal strain hyperelastic–plastic, or finite strain hyperelastic–plastic model. These constitutive models require new methods for calculating high-order polynomials for the velocity gradient and deformation gradient in an element. The plasticity associated with the strength model is determined using a radial return method to with a J 2 yield criterion and perfect plasticity. The temporal evolution of the governing equations is achieved with the total variation diminishing Runge–Kutta (TVD RK) time integration method. A diverse suite of 1D and 2D test problems are calculated. Here, the new 1D piston test problems, which have analytic solutions for each elastic–plastic model, are presented and calculated to demonstrate the stability and formal accuracy of the various models with the new Lagrangian DG method. 2D test problems are calculated to demonstrate the stability and robustness of the new Lagrangian DG method on multidimensional problems with high-order elements, which have faces that can bend.

42 ENGINEERING↗

Parallel exponential time differencing methods for geophysical flow simulations

Two ocean models are considered for geophysical flow simulations: the multilayer shallow water equations and the multilayer primitive equations. For the former, we investigate the parallel performance of exponential time differencing (ETD) methods, including exponential Rosenbrock–Euler, ETD2wave, and B-ETD2wave. For the latter, we take advantage of the splitting of barotropic and baroclinic modes and propose a new two-level method in which an ETD method is applied to solve the fast barotropic mode. Furthermore, these methods could improve the computational efficiency of numerical simulations because ETD methods allow for much larger time step sizes than traditional explicit time-stepping techniques that are commonly used in existing computational ocean models. Several standard benchmark tests for ocean modeling are performed and comparison of the numerical results demonstrates a great potential of applying the parallel ETD methods for simulating real-world geophysical flows.

54 ENVIRONMENTAL SCIENCES↗

A regularized deconvolution method for turbulent closure modeling in implicitly filtered large-eddy simulation

Turbulence closure models that are based on a regularized deconvolution method (RDM) are proposed for application to implicitly filtered Large-Eddy Simulation (LES). This method reconstructs sub-grid scale contributions by approximately recovering filtered quantities through an optimization approach. Physical principles on the boundedness and conservation of reconstructed quantities are preserved by constraining the optimization problem. Further, to account for effects of scales that are not resolved in implicitly filtered LES, a reconstruction method is proposed that combines sub-grid projection and energy-similarity to enrich unresolved scales. With this method, closure models are developed for turbulent scalar fluxes and turbulence–chemistry interaction that are intrinsically consistent with the LES formulation. These closure models are evaluated in application to a piloted turbulent jet flame with inhomogeneous inlet composition, in which combustion is represented by a two-scalar manifold model. The RDM-formulation is benchmarked against simulations obtained using a presumed PDF method and eddy diffusivity closure model. In partially-premixed flame regions, it is observed that RDM improves the prediction of turbulent mixing, and faster grid convergence is observed for results with RDM compared to simulations employing a presumed PDF method.

42 ENGINEERING↗

An improved numerical method to compute neutron/gamma deexcitation cascades starting from a high spin state

Numerous nuclear processes involve the deexcitation of a compound nucleus through the emission of several neutrons, gamma-rays and/or conversion electrons. The characteristics of such a deexcitation are commonly derived from a total statistical framework often called “Hauser–Feshbach” method. In this work, we highlight a numerical limitation of this kind of method in the case of the deexcitation of a high spin initial state. To circumvent this issue, an improved technique called the Fluctuating Structure Properties (FSP) method is presented. Two FSP algorithms are derived and benchmarked on the calculation of the total radiative width for a thermal neutron capture on 238 U. We compare the standard method with these FSP algorithms for the prediction of particle multiplicities in the deexcitation of a high spin level of 143 Ba. The gamma multiplicity turns out to be very sensitive to the numerical method. The bias between the two techniques can reach 1.5 γγ/cascade. Lastly, the uncertainty of these calculations coming from the lack of knowledge on nuclear structure is estimated via the FSP method.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Developing the RIAM method (rapid impact assessment matrix) in the context of impact significance assessment

In this paper the applicability of the RIAM method (rapid impact assessment matrix) is evaluated in the context of impact significance assessment. The methodological issues considered in the study are: 1) to test the possibilities of enlarging the scoring system used in the method, and 2) to compare the significance classifications of RIAM and unaided decision-making to estimate the consistency between these methods. The data used consisted of projects for which funding had been applied for via the European Union's Regional Development Trust in the area of Central Finland. Cases were evaluated with respect to their environmental, social and economic impacts using an assessment panel. The results showed the scoring framework used in RIAM could be modified according to the problem situation at hand, which enhances its application potential. However the changes made in criteria B did not significantly affect the final ratings of the method, which indicates the high importance of criteria A1 (importance) and A2 (magnitude) to the overall results. The significance classes obtained by the two methods diverged notably. In general the ratings given by RIAM tended to be smaller compared to intuitive judgement implying that the RIAM method may be somewhat conservative in character.

54 ENVIRONMENTAL SCIENCES↗

A watershed-based method for environmental vulnerability assessment with a case study of the Mid-Atlantic region

The paper presents a method for environmental vulnerability assessment with a case study of the Mid-Atlantic region. The method is based on the concept of 'self-/peer-appraisal' of a watershed in term of vulnerability. The self-/peer-appraisal process is facilitated by two separate linear optimization programs. The analysis provided insights on the environmental conditions, in general, and the relative vulnerability pattern, in particular, of the Mid-Atlantic region. The suggested method offers a simple but effective and objective way to perform a regional environmental vulnerability assessment. Consequently the method can be used in various steps in environmental assessment and planning. - Highlights: Black-Right-Pointing-Pointer We present a method for regional environmental vulnerability assessment. Black-Right-Pointing-Pointer It is based on the self-/peer-appraisal concept in term of vulnerability. Black-Right-Pointing-Pointer The analysis is facilitated by two separate linear optimization programs. Black-Right-Pointing-Pointer The method provides insights on the regional relative vulnerability pattern.

54 ENVIRONMENTAL SCIENCES↗

A method proposal for cumulative environmental impact assessment based on the landscape vulnerability evaluation

Cumulative environmental impact assessment deals with the occasional use in practical application of environmental impact assessment process. The main reasons are the difficulty of cumulative impact identification caused by lack of data, inability to measure the intensity and spatial effect of all types of impacts and the uncertainty of their future evolution. This work presents a method proposal to predict cumulative impacts on the basis of landscape vulnerability evaluation. For this purpose, qualitative assessment of landscape ecological stability is conducted and major vulnerability indicators of environmental and socio-economic receptors are specified and valuated. Potential cumulative impacts and the overall impact significance are predicted quantitatively in modified Argonne multiple matrixes while considering the vulnerability of affected landscape receptors and the significance of impacts identified individually. The method was employed in the concrete environmental impact assessment process conducted in Slovakia. The results obtained in this case study reflect that this methodology is simple to apply, valid for all types of impacts and projects, inexpensive and not time-consuming. The objectivity of the partial methods used in this procedure is improved by quantitative landscape ecological stability evaluation, assignment of weights to vulnerability indicators based on the detailed characteristics of affected factors, and grading impact significance. - Highlights: • This paper suggests a method proposal for cumulative impact prediction. • The method includes landscape vulnerability evaluation. • The vulnerability of affected receptors is determined by their sensitivity. • This method can increase the objectivity of impact prediction in the EIA process.

54 ENVIRONMENTAL SCIENCES↗

A new method to assess the sustainability performance of events: Application to the 2014 World Orienteering Championship

Nowadays an increasing attention of public and private agencies to the sustainability performance of events is observed, since it is recognized as a key issue in the context of sustainable development. Assessing the sustainability performance of events involves environmental, social and economic aspects; their impacts are complex and a quantitative assessment is often difficult. This paper presents a new quali-quantitative method developed to measure the sustainability of events, taking into account all its potential impacts. The 2014 World Orienteering Championship, held in Italy, was selected to test the proposed evaluation methodology. The total carbon footprint of the event was 165.34 tCO{sub 2}eq and the avoided emissions were estimated as being 46 tCO{sub 2}eq. The adopted quali-quantitative method resulted to be efficient in assessing the sustainability impacts and can be applied for the evaluation of similar events. - Highlights: • A quali-quantitative method to assess events' sustainability is presented. • All the methodological issues related to the method are explained. • The method is used to evaluate the sustainability of an international sports event. • The method resulted to be valid to assess the event's sustainability level. • The carbon footprint of the event has been calculated.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

System dynamic simulation: A new method in social impact assessment (SIA)

Many complex social questions are difficult to address adequately with conventional methods and techniques, due to the complicated dynamics, and hard to quantify social processes. Despite these difficulties researchers and practitioners have attempted to use conventional methods not only in evaluative modes but also in predictive modes to inform decision making. The effectiveness of SIAs would be increased if they were used to support the project design processes. This requires deliberate use of lessons from retrospective assessments to inform predictive assessments. Social simulations may be a useful tool for developing a predictive SIA method. There have been limited attempts to develop computer simulations that allow social impacts to be explored and understood before implementing development projects. In light of this argument, this paper aims to introduce system dynamic (SD) simulation as a new predictive SIA method in large development projects. We propose the potential value of the SD approach to simulate social impacts of development projects. We use data from the SIA of Gareh-Bygone floodwater spreading project to illustrate the potential of SD simulation in SIA. It was concluded that in comparison to traditional SIA methods SD simulation can integrate quantitative and qualitative inputs from different sources and methods and provides a more effective and dynamic assessment of social impacts for development projects. We recommend future research to investigate the full potential of SD in SIA in comparing different situations and scenarios.

54 ENVIRONMENTAL SCIENCES↗

A method for automated modeling of plasma shape control response in tokamaks

Here, a simple method commonly used in modeling of tokamak conductor and plasma response for plasma control has been extended to allow more general modeling of tokamak PF conductor circuits. This extension combines a previously existing method for integrating plasma response and tokamak circuits with a more capable circuit modeling technique derived from the theory that underlies present-day automatic circuit simulation codes. This combined method can incorporate any combination of inductors (e.g., coils), resistors, capacitors, voltage sources, and current sources, while retaining the same model structure and ease of interpretation as the simple method. For many tokamaks, use of this extended method would not be the preferred approach, but for certain devices or for specialized models of a device, it is useful and occasionally essential. For example, the method has enabled fast and automated modeling of the complicated and daily-changing circuit topology used in the DIII-D tokamak. This automated modeling is essential to the support of controller design for the frequently changing requirements for DIII-D plasmas. It is likely to also find application in the workflows for new device designs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Early Dose Response to Yttrium-90 Microsphere Treatment of Metastatic Liver Cancer by a Patient-Specific Method Using Single Photon Emission Computed Tomography and Positron Emission Tomography

Purpose: To evaluate a patient-specific single photon emission computed tomography (SPECT)-based method of dose calculation for treatment planning of yttrium-90 ({sup 90}Y) microsphere selective internal radiotherapy (SIRT). Methods and Materials: Fourteen consecutive {sup 90}Y SIRTs for colorectal liver metastasis were retrospectively analyzed. Absorbed dose to tumor and normal liver tissue was calculated by partition methods with two different tumor/normal liver vascularity ratios: an average 3:1 and a patient-specific ratio derived from pretreatment technetium-99m macroaggregated albumin SPECT. Tumor response was quantitatively evaluated from fluorine-18 fluoro-2-deoxy-D-glucose positron emission tomography scans. Results: Positron emission tomography showed a significant decrease in total tumor standardized uptake value (average, 52%). There was a significant difference in the tumor absorbed dose between the average and specific methods (p = 0.009). Response vs. dose curves fit by linear and linear-quadratic modeling showed similar results. Linear fit r values increased for all tumor response parameters with the specific method (+0.20 for mean standardized uptake value). Conclusion: Tumor dose calculated with the patient-specific method was more predictive of response in liver-directed {sup 90}Y SIRT.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A high-order multiscale finite-element method for time-domain elastic wave modeling in strongly heterogeneous media

Efficient and accurate numerical methods for elastic wave modeling in complex media have many important applications. However, it is fairly challenging to model elastic wave propagation in strongly heterogeneous media with high computational efficiency and high-order accuracy simultaneously. We develop a novel high-order multiscale finite-element method to model elastic wave propagation in strongly heterogeneous media in the time domain. The most important feature of our method is a generalization of standard multiscale finite element method by using high-order multiscale finite-element basis functions to capture the fine-scale heterogeneities on the coarse mesh, in contrast to conventional finite-element basis functions that are merely determined by the order of polynomials. These multiscale basis functions leads to a system matrix with significantly reduced dimension, thus enable us to solve the elastic wave equation on the coarse mesh with high-order accuracy and very low computational time cost. In conclusion, we use 2D and 3D numerical examples to demonstrate the superior efficiency and accuracy of our new modeling method compared with the conventional spectral-element method.

58 GEOSCIENCES↗

Spatially adaptive stochastic numerical methods for intrinsic fluctuations in reaction-diffusion systems

Stochastic partial differential equations are introduced for the continuum concentration fields of reaction-diffusion systems. The stochastic partial differential equations account for fluctuations arising from the finite number of molecules which diffusively migrate and react. Spatially adaptive stochastic numerical methods are developed for approximation of the stochastic partial differential equations. The methods allow for adaptive meshes with multiple levels of resolution, Neumann and Dirichlet boundary conditions, and domains having geometries with curved boundaries. A key issue addressed by the methods is the formulation of consistent discretizations for the stochastic driving fields at coarse-refined interfaces of the mesh and at boundaries. Methods are also introduced for the efficient generation of the required stochastic driving fields on such meshes. As a demonstration of the methods, investigations are made of the role of fluctuations in a biological model for microorganism direction sensing based on concentration gradients. Also investigated, a mechanism for spatial pattern formation induced by fluctuations. The discretization approaches introduced for SPDEs have the potential to be widely applicable in the development of numerical methods for the study of spatially extended stochastic systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High order finite difference methods with subcell resolution for advection equations with stiff source terms

A new high order finite-difference method utilizing the idea of Harten ENO subcell resolution method is proposed for chemical reactive flows and combustion. In reaction problems, when the reaction time scale is very small, e.g., orders of magnitude smaller than the fluid dynamics time scales, the governing equations will become very stiff. Wrong propagation speed of discontinuity may occur due to the underresolved numerical solution in both space and time. The present proposed method is a modified fractional step method which solves the convection step and reaction step separately. In the convection step, any high order shock-capturing method can be used. In the reaction step, an ODE solver is applied but with the computed flow variables in the shock region modified by the Harten subcell resolution idea. For numerical experiments, a fifth-order finite-difference WENO scheme and its anti-diffusion WENO variant are considered. A wide range of 1D and 2D scalar and Euler system test cases are investigated. Studies indicate that for the considered test cases, the new method maintains high order accuracy in space for smooth flows, and for stiff source terms with discontinuities, it can capture the correct propagation speed of discontinuities in very coarse meshes with reasonable CFL numbers.

97 MATHEMATICS AND COMPUTING↗

A computational method for solving stochastic Itô–Volterra integral equations based on stochastic operational matrix for generalized hat basis functions

In this paper, a new computational method based on the generalized hat basis functions is proposed for solving stochastic Itô–Volterra integral equations. In this way, a new stochastic operational matrix for generalized hat functions on the finite interval [0,T] is obtained. By using these basis functions and their stochastic operational matrix, such problems can be transformed into linear lower triangular systems of algebraic equations which can be directly solved by forward substitution. Also, the rate of convergence of the proposed method is considered and it has been shown that it is O(1/(n{sup 2}) ). Further, in order to show the accuracy and reliability of the proposed method, the new approach is compared with the block pulse functions method by some examples. The obtained results reveal that the proposed method is more accurate and efficient in comparison with the block pule functions method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hybrid immersed interface-immersed boundary methods for AC dielectrophoresis

Dielectrophoresis, a nonlinear electrokinetic transport mechanism, has become popular in many engineering applications including manipulation, characterization and actuation of biomaterials, particles and biological cells. In this paper, we present a hybrid immersed interface–immersed boundary method to study AC dielectrophoresis where an algorithm is developed to solve the complex Poisson equation using a real variable formulation. An immersed interface method is employed to obtain the AC electric field in a fluid media with suspended particles and an immersed boundary method is used for the fluid equations and particle transport. The convergence of the proposed algorithm as well as validation of the hybrid scheme with experimental results is presented. In this paper, the Maxwell stress tensor is used to calculate the dielectrophoretic force acting on particles by considering the physical effect of particles in the computational domain. Thus, this study eliminates the approximations used in point dipole methods for calculating dielectrophoretic force. A comparative study between Maxwell stress tensor and point dipole methods for computing dielectrophoretic forces are presented. The hybrid method is used to investigate the physics of dielectrophoresis in microfluidic devices using an AC electric field. The numerical results show that with proper design and appropriate selection of applied potential and frequency, global electric field minima can be obtained to facilitate multiple particle trapping by exploiting the mechanism of negative dielectrophoresis. Our numerical results also show that electrically neutral particles form a chain parallel to the applied electric field irrespective of their initial orientation when an AC electric field is applied. This proposed hybrid numerical scheme will help to better understand dielectrophoresis and to design and optimize microfluidic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗