Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model Basin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Land Use and Land Cover Change in Forest Frontiers: The Role of Household Life Cycles

Tropical deforestation remains a critical issue given its present rate and a widespread consensus regarding its implications for the global carbon cycle and biodiversity. Nowhere is the problem more pronounced than in the Amazon basin, home to the world's largest intact, tropical forest. This article addresses land cover change processes at household level in the Amazon basin, and to this end adapts a concept of domestic life cycle to the current institutional environment of tropical frontiers. In particular, it poses a risk minimization model that integrates demography with market-based factors such as transportation costs and accessibility. In essence, the article merges the theory of Chayanov with the household economy framework, in which markets exist for inputs (including labor), outputs, and capital. The risk model is specified and estimated, using survey data for 261 small producers along the Transamazon Highway in the eastern sector of the Brazilian Amazon.

Walker, Robert↗

Hydrological Modeling of the Jezero Crater Outlet-Forming Flood

Abundant evidence exists for lakes on Mars both from orbital observations [e.g., 1-3] and in situ exploration [e.g., 4-5]. These lakes can be divided into two classes: those that were hydrologically closed, so their source valley(s) terminated at the basin [3], and those that were hydrologically open, where there was sufficient flow from inlet valley(s) to cause the lake to breach and form an outlet valley [2]. It is easier to be confident from orbital data alone that a standing body of water must have existed in open basins, because there is no other way for their perched outlet valleys to form. The majority of basins fed by valley networks, rather than by isolated inlet valleys, are open [6], with some important exceptions (e.g., Gale Crater). Jezero crater (Fig. 1) is one of the most well-studied open basin paleolakes on Mars, with a breach that re-mains well above the lowest part of the crater floor, and two sedimentary fans at its northwestern margin that are likely deltaic in origin [7-9]. CRISM observations of these sediments indicate they host a variety of alteration minerals [9-11], including smectite and carbonate, and both the mineralogy of the sediments and their settings suggest they have a strong potential for preserving organic materials [10]. As a result, Jezero is a strong candidate landing site for the Mars 2020 rover. Approximate formative discharges have been estimated for its well-preserved western fan (Q approximately 500m3/s) [7], but to our knowledge, no estimates for the dis-charges associated with formation and incision of its outlet valley have been presented. Indeed, only a few studies [e.g., 12-14] have attempted to reconstruct the formation of outlet breaches broadly similar to Jezero anywhere on Mars, despite the apparent commonality of basins with large outlets [e.g., 2]. The outlet valley formed as a dam breach when the lake overflowed. In such an event, the growth and incision of the breach is directly coupled to flood discharge. In the case of Jezero, the discharge through the breach eventually lacked the energy needed to erode through the dam further, preventing complete drainage of the lake. After the initial flood, further incision can take place if additional water flows into, and thus out of, the hydrologically open lake, though the rate of this erosion occurs under more typical fluvial conditions. Despite this qualitative understanding of the process, it is useful to explore numerically what range of model parameters are potentially consistent with obser-vations of the outlet. We ultimately seek to address questions that include: (1) What was the flood hydro-graph?, (2) What sediment transport processes were involved and what can we infer about the erosion process? (3) Can most or all of the Jezero outlet's morphology be explained as a consequence of catastrophic formation, or is additional longer-term erosion required?

geology↗

Dynamic heat capacity of the east model and of a bead-spring polymer model.

In this report we have presented a brief review of the glass transition and one means of characterizing glassy materials: linear and nonlinear thermodynamic oscillatory experiments to extract the dynamic heat capacity. We have applied these methods to the east model (a variation of the Ising model for glass forming systems) and a simple polymeric system via molecular dynamics simulation, and our results match what is seen in experiment. For the east model, since the dynamics are so simple, a mathematical model is developed that matches the simulated dynamics. For the polymeric system, since the system is a simulation, we can instantaneously 'quench' the system - removing all vibrational energy - to separate the vibrational dynamics from dynamics associated with particle rearrangements. This shows that the long-time glassy dynamics are due entirely to the particle rearrangements, i.e. basin jumping on the potential energy landscape. Finally, we present an extension of linear dynamic heat capacity to the nonlinear regime.

36 MATERIALS SCIENCE↗

Bifurcation characteristics and safe basin of MSMA microgripper subjected to stochastic excitation

A kind of magnetic shape memory alloy (MSMA) microgripper is proposed in this paper, and its nonlinear dynamic characteristics are studied when the stochastic perturbation is considered. Nonlinear differential items are introduced to explain the hysteretic phenomena of MSMA, and the constructive relationships among strain, stress, and magnetic field intensity are obtained by the partial least-square regression method. The nonlinear dynamic model of a MSMA microgripper subjected to in-plane stochastic excitation is developed. The stationary probability density function of the system’s response is obtained, the transition sets of the system are determined, and the conditions of stochastic bifurcation are obtained. The homoclinic and heteroclinic orbits of the system are given, and the boundary of the system’s safe basin is obtained by stochastic Melnikov integral method. The numerical and experimental results show that the system’s motion depends on its parameters, and stochastic Hopf bifurcation appears in the variation of the parameters; the area of the safe basin decreases with the increase of the stochastic excitation, and the boundary of the safe basin becomes fractal. The results of this paper are helpful for the application of MSMA microgripper in engineering fields.

36 MATERIALS SCIENCE↗

Landslide Susceptibility and Runout Assessment for the Arun Hydropower Cascade in Nepal Based on Multitemporal Landslide Inventory Developed Using Planet Imagery

The transboundary Pumqu/Arun River basin spreads across Nepal and Tibet. Nearly 95% of the basin lies in Tibet through which the Pumqu River flows forming the Arun River once it enters Nepal. The Arun River valley has about 3,163 MW in five large hydropower projects undergoing construction or planned for the future. Rainfall and earthquake-induced landslides, landslide dammed lakes and landslide-induced glacial lake outburst floods pose major risks to smooth operation of these projects. To safeguard upcoming hydropower projects, areas susceptible to landslides in the Arun River valley must be identified. We generated a multitemporal landslide inventory (2010-2020), modeled landslide susceptibility and runouts around the hydropower sites using Earth Observation (EO) techniques. We used high-resolution satellite imagery from Planet and open-source tool to establish a detailed and comprehensive multitemporal landslide inventory for the basin. The rigorous quality-controlled inventory represents yearly record of landslides from 2010 to 2020. To our knowledge this is one of the most comprehensive landslide inventories for the basin with yearly records of landslides.A data-driven approach was used to map areas susceptible to landslides within the Pumqu/Arun River basin. The multitemporal landslide inventory combined with other readily available EO-based variables were used to create a landslide susceptibility map. The highly susceptible areas delineated from the map was further used to characterize runouts near the hydropower sites. The susceptibility and runout analysis provide a valuable initial estimate of where landslides are likely to trigger and where the mobilized material is likely to end up.

Pukar Amatya↗

Understanding How Reservoir Operations Influence Methane Emissions: A Conceptual Model

Because methane is a potent greenhouse gas (GHG), understanding controls on methane emissions from reservoirs is an important goal. Yet, reservoirs are complex ecosystems, and mechanisms by which reservoir operations influence methane emissions are poorly understood. In part, this is because emissions occur in ‘hot spots’ and ‘hot moments’. In this study, we address three research questions, ‘What are the causal pathways through which reservoir operations and resulting water level fluctuations (WLF) influence methane emissions?’; ‘How do influences from WLF differ for seasonal drawdown and diurnal hydropeaking operations?’; and ‘How does understanding causal pathways inform practical options for mitigation?’. A graphical conceptual model is presented that links WLF in reservoirs to methane emissions via four causal pathways: (1) water-column mixing (2) drying–rewetting cycles, (3) sediment delivery and redistribution, and (4) littoral vegetation. We review what is known about linkages for WLF at seasonal and diurnal resolutions generate research questions, and hypothesize strategies for moderating methane emissions by interrupting each causal pathway. Those related to flow management involve basin-scale management of tributary flows, seasonal timing of hydropeaking (pathway #1), timing and rates of drawdown (pathway #2). In addition, we describe how sediment (pathway #3) and vegetation management (pathway #4) could interrupt linkages between WLF and emissions. We demonstrate the strength of conceptual modeling as a tool for generating plausible hypotheses and suggesting mitigation strategies. Future research is needed to develop simpler models at appropriate timescales that can be validated and used to manage flow releases from reservoirs.

13 HYDRO ENERGY↗

Supplementary Data for "Evaluation of the Economic Implications of Varied Pressure Drawdown Strategies Generated Using a Real-time, Rapid Predictive, Multi-fidelity Model for Unconventional Oil and Gas Wells" by Bello, K., Vikara, D., Sheriff, A., Viswanathan, H., Carr, T., Sweeney, M., O'Malley, D., Marquis, M., Vactor, R.T., and Cunha, L.

The Bello et al. study evaluates the impact of contrasting pressure drawdown on gas productivity and the resulting economics of a well in the Marcellus Shale of the Appalachian Basin. This research applies a techno-economic analysis approach to help identify potential ways pressure management strategies can be used to improve cumulative recovery of hydraulically fractured horizontal wells while maintaining project profitability. Gas production forecast outlook scenarios of the Marcellus Shale Energy and Environment Laboratory Laboratory's MIP-3H well were generated under varying pressure drawdowns using two approaches: 1) a novel physics-informed machine learning (PIML) workflow and 2) via traditional reservoir simulation in Computer Modeling Group’s (CMG) GEM Compositional & Unconventional Simulator. Cash flow and other economic metrics of interest were compiled on the production outlook using the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL) Unconventional Shale Well Economic Model (UShWEM).The sheets within this Microsoft ExcelTM workbook provide the economic metric outputs for the baseline condition and the one-at-a-time (OAT) sensitivity analysis of UShWEM's input parameters for each of the production scenarios evaluated.

Fracture Network Model↗

Detailed analysis of geothermal potential in Crescent Valley, north-central Nevada

This study has synthesized geological, geochemical, and geophysical data sets to elucidate the structural architecture and history of the Crescent basin in order to assess its geothermal potential. The Crescent basin is a complex composite basin, consisting primarily of multiple east-tilted half grabens and horst blocks bounded by several major faults of variable strike. Fault kinematic data indicate a present-day west-northwesttrending least principal stress, which in turn suggests that north-northeast-striking normal faults have relatively high slip and dilation tendency. However, a protracted history of changing Cenozoic extension directions has produced a mosaic of fault patterns, which has generated both segmented fault geometries and multiple fault intersections. These structural complexities have ultimately primed the basin for geothermal activity. Detailed analyses and application of the play fairway methodology have respectively denoted and ranked 12 favorable structural settings capable of hosting geothermal fluids in the Crescent basin. Of the 12 favorable structural settings, five were identified as having a higher likelihood of hosting a relatively high-temperature (>130°C) geothermal system, including Hand-Me-Down Creek, Hot Springs Point, and three other unnamed areas. The Hand-Me-Down Creek hybrid structural setting along the Crescent Valley fault is the only documented relatively high temperature geothermal system identified in the basin. It contains an active 87°C hot spring actively depositing sinter and geothermometry greater than 170°C (possibly >180°C). Future exploration efforts at Hand-Me-Down Creek would benefit from focusing on targeting high permeability zones at depth utilizing densely spaced electromagnetic surveys, fluid flow modeling, and selective drilling that targets specific fault intersections within the greater step-over at depth. The Hot Springs Point hybrid structural setting along the Dry Hills fault hosts a geothermal system, but geothermometry, spring temperatures, and well temperatures indicate that fluids do not exceed ~100°C. Three other relatively promising areas include a fault intersection in the central part of the basin and two step-overs (relay ramps) along the Crescent Valley fault, but additional exploration is needed at these sites, such as 2-m temperature surveys in the dry season, measuring deeper subsurface temperatures through temperature-gradient drilling, and collecting water samples through geoprobe drilling to estimate geothermometry.

15 GEOTHERMAL ENERGY↗

A Model Study of the Relative Influences of Scavenging and Circulation on 230Th and 231Pa in the Western North Atlantic

The oceanic cycles of thorium-230 and protactinium-231 are affected by a number of processes, such as removal by adsorption to settling particles and transport by ocean currents. Measurements obtained as part of GEOTRACES and earlier programs have shown that, in the North Atlantic, the activities of dissolved 230Th (230Thd) and 231Pa (231Pad) at abyssal depths are lower near the western margin than in the basin interior. At least two factors could explain the lower 230Thd and 231Pad near the margin: (i) intensified scavenging in benthic nepheloid layers (BNLs) extending a thousand meters or more above the seafloor; and (ii) ventilation by relatively 230Thd- and 231Pad-poor waters emanating from the Deep Western Boundary Current (DWBC).Here a regional ocean circulation model with ?eddy-permitting' resolution (1/4) that incorporates 230Th and 231Pa is used in an effort to reproduce the observed distributions of 230Th and 231Pa in the western North Atlantic. In this model, 230Th and 231Pa removal from solution is governed by a prescribed distribution of particulate matter that is derived from a recent synthesis of nephelometer and transmissometer data. The model simulates a meandering Gulf Stream and a DWBC along the continental slope and rise, although noticeable differences with physical observations also exist. A model solution is found that explains most of the variance of 230Thd measurements (85%) and 231Pad measurements (81%) from (pre-)GEOTRACES cruises. On the other hand, measurements of particulate 230Th (230Thp) and 231Pa (231Pap) are more difficult to reproduce, with the same solution accounting for only 49% (11%) of the 230Thp (231Pap) variance. Sensitivity experiments suggest that the low 230Thd and 231Pad activities observed near the western margin are due to enhanced removal rates of both nuclides in BNLs rather than to deep water ventilation from the western boundary. The radionuclide activities present in the DWBC at its inflow location are also found to strongly influence the basin-scale distributions of 230Th and 231Pa. Overall, our study points to BNLs as important sites of 230Th and 231Pa scavenging in the ocean and illustrates the difficulty to explain simultaneously radionuclide measurements in dissolved and particulate forms in the studied area.

Lerner, Paul↗

Strong Influence of Irrigation on Water Budget and Land Surface Temperature in Indian Subcontinental River Basins

Irrigation modulates the terrestrial water budget, especially in intensively irrigated regions such as Indian sub-continent river basins, where 35% of agricultural land has been irrigated during 2010. Here, we investigate the impact of irrigation on water budget components and land surface temperature (LST), as well as seasonal and annual trends of irrigation water demand in response to climate variability over the Indian sub-continental region. We use the Variable Infiltration Capacity (VIC) model coupled with an irrigation scheme (VIC-IRR) to represent the irrigation activities. The VIC-IRR model was calibrated and evaluated against in-situ and remote sensing observations including streamflow from India-Water Resource Information System (WRIS), Terrestrial Water Storage Change (TWSC) from Gravity Recovery and Climate Experiment (GRACE), LST from Advanced Along-Track Scanning Radiometer (AATSR), and observed gravimetric soil moisture data from India Meteorology Department (IMD). We conducted two simulations (i.e., with and without irrigation) over 18 Indian sub-continental basins at 0.25° spatial resolution from 1951 to 2012. The comparison between the two simulations indicates that as a result of irrigation, evapotranspiration (ET) increases in all the basins. We find that mean annual ET of Indus and Ganges basins increases by 47% and 12%, respectively due to irrigation. After irrigation, basin averaged total runoff (TR) was increased in the most irrigated basins (i.e., Sabarmati, Ganges, and Indus) by 4.62%, 11.87% and 7.06% in the monsoon, pre-monsoon, and post-monsoon seasons, respectively. The land surface temperature was cooled down in range of 0.2-0.65 °C in the Indian sub-continental basins especially in Ganges and Indus basins. Compare to other basins; irrigation water demand was high in Indus and Ganges basins during the post-monsoon season. Using the nonparametric Mann–Kendall trend test we find that in the pre-monsoon and monsoon seasons over the study period, irrigation demand decreased by 8.25 mm/year in 13 basins. Whereas for the post-monsoon season, irrigation water demand increased in 12 out of the 18 basins. Changes in irrigation demands are largely driven by changes in soil moisture due to decline in the summer monsoon precipitation.

54 ENVIRONMENTAL SCIENCES↗

Predicting variations of the least principal stress with depth: Application to unconventional oil and gas reservoirs using a log-based viscoelastic stress relaxation model

Knowledge of layer-to-layer variations of the least principal stress, S hmin , with depth is essential for optimization of multi-stage hydraulic fracturing in unconventional reservoirs. Utilizing a geomechanical model based on viscoelastic stress relaxation in relatively clay rich rocks, we present a new method for predicting continuous S hmin variations with depth. The method utilizes geophysical log data and S hmin measurements from routine diagnostic fracture injection tests (DFITs) at several depths for calibration. We consider a case study in the Wolfcamp formation in the Midland Basin, where both geophysical logs and values of S hmin from DFITs are available. We compute a continuous stress profile as a function of the well logs that fits all of the DFITs well. We utilized several machine learning technologies, such as bootstrap aggregation (or bagging), to improve the generalization of the model and demonstrate that the excellent fit between predicted and observed stress values is not the result of over-fitting the calibration points. The model is then validated by accurately predicting hold-out stress measurements from four wells within the study area and, without recalibration, accurately predicting stress as a function of depth in an offset pad about 6 miles away.

58 GEOSCIENCES↗

A Sensitivity Analysis of Surface Biophysical, Carbon, and Climate Impacts of Tropical Deforestation Rates in CCSM4-CNDV*

The biophysical–climate and combined biophysical and carbon–climate feedbacks of tropical deforestation rates are explored through sensitivity analyses using the Community Climate System Model 4 with prognostic carbon–nitrogen and dynamic vegetation. Simulations test 5%, 2%, 1%, and 0.5% annual deforestation rates, each paired with preservation targets of 10% per tropical tree type. Perturbations are applied over pan-tropical land but analyses also explore responses over the subcontinental areas of the Amazon basin, central Africa, and Southeast Asia. Sensitivities [expressed as the change in a variable per million square kilometers (Mkm 2 ) of change in tree cover] and means of selected biophysical, carbon, and climate variables during and after deforestation are compared across rates. The most apparent effect of the rates is in hastening/postponing climate change, but otherwise results show no consistent differences across rates and vary more across subcontinents (with the Amazon basin reflecting highest sensitivities in albedo and ground temperatures, and Southeast Asia for total ecosystem carbon). Furthermore, biophysical feedbacks alone were found to have significant impact on climate over subcontinental scales. In the Amazon, ground temperature increase due to biophysical feedbacks is as much as 55%, and precipitation decrease up to 61%, of combined biophysical and carbon impacts. Replication with other models is required. While it is still unclear whether a slow but prolonged deforestation differs in impacts from one that is rapid but short, the rate can still be relevant to planning with regards to the timing of impacts.

54 ENVIRONMENTAL SCIENCES↗

500+ Million Years of Volcanism in Australe

The roughly circular collection of mare deposits in the "Mare Australe" region (38.9°S, 93°E) is ~900 km in diameter. The maria erupted into post-basin impact craters but are generally disconnected from each other. The distribution of maria could reflect what might have been the early stages of other basin filling mare eruptions, but which are preserved in Australe and some farside locations [1-3]. Topographic data fail to indicate a 900-km basin, but gravity and topographic data suggest a 600-km basin in the northern part of Australe [6]. The relationship between the basin and the wider-spread mare deposits is unclear, particularly outside the basin. We utilized images, gravity, topography, and composition to investigate the timing of volcanism in "Mare Australe" to interpret the evolution of magmatism in Australe and how it might relate to other mare sources. Humboldt crater (~3.6 Ga) makes an excellent stratigraphic marker that can be traced across much of the deposits and serves as a stratigraphic calibration for absolute model ages (AMAs) derived from crater size-frequency distributions (CSFDs). We found a range of AMAs from ~3.3 to 3.8 Ga in north Australe, similar to previous studies [4], and there is also evidence for multiple deposits of older cryptomaria. The age range, however, is narrower than for maria in other basins (e.g., Imbrium and South Pole-Aitken [4-5]), suggesting different magmatism in Australe. Most of the mare deposits are >3.5 Ga; younger deposits are co-located in the north basin. The basin may have provided additional pathways for rising magma to the surface over time. We also found evidence of a several interconnected deposits within the north basin. Other, smaller deposits, however, clearly show distinct age differences between units within a single topographic depression (e.g., Lyot crater) and likely represent discrete eruptions. Additionally, there are no floor fractured craters other than Humboldt [6], suggesting that magma generally did not stall out near the surface, also consistent with gravity and (lack of) magnetic anomalies (in contrast to Marius Hills and South Pole-Aitken basin [7-8]).

Julie Dawn Stopar↗

Near-global summer circulation response to the spring surface temperature anomaly in Tibetan Plateau –– the GEWEX/LS4P first phase experiment

Subseasonal to seasonal (S2S) prediction of droughts and floods is one of the major challenges of weather and climate prediction. Recent studies suggest that the springtime land surface temperature/subsurface temperature (LST/SUBT) over the Tibetan Plateau (TP) can be a new source of S2S predictability. The project “Impact of Initialized Land Surface Temperature and Snowpack on Subseasonal to Seasonal Prediction (LS4P)” was initiated to study the impact of springtime LST/SUBT anomalies over high mountain areas on summertime precipitation predictions. The present work explores the simulated global scale response of the atmospheric circulation to the springtime TP land surface cooling by 16 current state-of-the-art Earth System Models (ESMs) participating in the LS4P Phase I (LS4P-I) experiment. The LS4P-I results show, for the first time, that springtime TP surface anomalies can modulate a persistent quasi-barotropic Tibetan Plateau-Rocky Mountain Circumglobal (TRC) wave train from the TP via the northeast Asia and Bering Strait to the western part of the North America, along with the springtime westerly jet from TP across the whole North Pacific basin. The TRC wave train modulated by the TP thermal anomaly play a critical role on the early summer surface air temperature and precipitation anomalies in the regions along the wave train, especially over the northwest North America and the southern Great Plains. The participant models that fail in capturing the TRC wave train greatly under-predict climate anomalies in reference to observations and the successful models. These results suggest that the TP LST/SUBT anomaly via the TRC wave train is the first order source of the S2S variability in the regions mentioned. Furthermore, the TP surface temperature anomaly can influence the Southern Hemispheric circulation by generating cross-equator wave trains. However, the simulated propagation pathways from the TP into the Southern Hemisphere show large inter-model differences. More dynamical understanding of the TRC wave train as well as its cross-equator propagation into the Southern Hemisphere will be explored in the newly launched LS4P phase II experiment.

54 ENVIRONMENTAL SCIENCES↗

Evaluation and calibration of MERRA-2 and CAMS reanalysis for PM 2.5 in a semi-urbanized area in the south of the Amazon

Air pollution has significant implications for the climate and poses irreversible risks to human health. The Amazon region of Brazil is severely affected by biomass burning (BB) emissions, yet air quality monitoring remains highly inadequate. Given the scarcity of surface-based observations, reanalysis models have become essential tools for assessing air pollution. Although MERRA-2 and CAMS PM 2.5 products are widely utilized, their validation and comprehensive evaluation for the Amazon Basin remain limited. Here, this study assesses the performance of these products in a semi-urbanized region in the southern Amazon. The calibrated time series was employed to analyze PM 2.5 concentrations from 2003 to 2023. Our results showed satisfactory performance of both products for the 24-h averages of PM 2.5 , with linear correlations above 0.76. However, it was found that both products overestimate surface concentrations. MERRA-2 performed better, with approximately 30% lower bias than CAMS. Time series analysis showed that the study area is strongly impacted by emissions BB in the dry period, mainly in August and September. Furthermore, our findings indicate a positive trend in increasing PM 2.5 concentrations, with a notable rise observed since 2014. The average PM 2.5 levels frequently exceed the daily air quality guidelines established by the WHO in 2021. It has been estimated that the population of this region is exposed to concentrations above 15 μg.m -3 , on average, more than 30 days per year. Our results contribute to the evaluation of MERRA-2 and CAMS products for Amazon and provide a corrected estimate for surface PM 2.5 . Recent concerns about air quality and the implementation of new surface monitoring networks may improve the evaluation of reanalysis products. In the short term, the need for this information makes our assessments indispensable.

54 ENVIRONMENTAL SCIENCES↗

Impact of elliptical boreholes on in situ stress estimation from leak-off test data

We developed an inversion technique to determine in situ stresses for elliptical boreholes of arbitrary trajectory. In this approach, borehole geometry, drilling-induced fracture information, and other available leak-off test data were used to construct a mathematical model, which was in turn applied to finding the inverse of an overdetermined system of equations. The method has been demonstrated by a case study in the Appalachian Basin, USA. The calculated horizontal stresses are in reasonable agreement with the reported regional stress study of the area, although there are no field measurement data of the studied well for direct calibration. The results also indicate that 2% of axis difference in the elliptical borehole geometry can cause a 5% difference in minimum horizontal stress calculation and a 10% difference in maximum horizontal stress calculation.

42 ENGINEERING↗

Subsurface microbial communities as a tool for characterizing regional-scale groundwater flow

Subsurface microbial community distribution patterns are influenced by biogeochemical and groundwater fluxes and may inform hydraulic connections along groundwater-flow paths. This study examined the regional-scale microbial community of the Death Valley Regional Flow System and evaluated whether subsurface communities can be used to identify groundwater-flow paths between recharge and discharge areas. Samples were collected from 36 sites in three groundwater basins: Pahute Mesa–Oasis Valley (PMOV), Ash Meadows (AM), and Alkali Flat–Furnace Creek Ranch (AFFCR). Microbial diversity within and between communities varied by location, and communities were separated into two overall groups that affiliated with the AM and PMOV/AFFCR basins. Network analysis revealed patterns between clusters of common microbes that represented groundwaters with similar geochemical conditions and largely corroborated hydraulic connections between recharge and discharge areas. Null model analyses identified deterministic and stochastic ecological processes contributing to microbial community assemblages. Most communities were more different than expected and governed by dispersal limitation, geochemical differences, or undominating processes. However, certain communities from sites located within or near the Nevada National Security Site were more similar than expected and dominated by homogeneous dispersal or selection. Overall, the (dis)similarities between the microbial communities of DVRFS recharge and discharge areas supported previously documented hydraulic connections between: (1) Spring Mountains and Ash Meadows; (2) Frenchman and Yucca Flat and Amargosa Desert; and (3) Amargosa Desert and Death Valley. However, only a portion of the flow path between Pahute Mesa and Oasis Valley could be supported by microbial community analyses, likely due to well-associated artifacts in samples from the two Oasis Valley sites. This study demonstrates the utility of combining microbial data with hydrologic, geologic, and water-chemistry information to comprehensively characterize groundwater systems, highlighting both strengths and limitations of this approach.

54 ENVIRONMENTAL SCIENCES↗