Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHASE STABILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Neutron diffraction analysis and electrochemical performance of spinel Ni(Mn{sub 2−x}Co{sub x})O{sub 4} as anode materials for lithium ion battery

Highlights: • The reversible capacity and cyclability of Ni(Mn{sub 2−x}Co{sub x})O{sub 4} first increases and then decreases with increasing Co content. • Neutron diffraction and Rielveld refinements are applied to analyze the site occupancies of Mn, Co, O and Ni. • Excessive Co ions in 8a and 16d sites reduce the structure stability leading to poor electrochemical performance. - Abstract: The effects of Co substitution on the structure and electrochemical performances of spinel Ni(Mn{sub 2−x}Co{sub x})O{sub 4} (x = 0, 0.5, and 1.0) have been investigated. With the increase of Co content the lattice parameters decrease owing to the smaller ion radius of Co than Mn. The reversible capacity and cyclability of Ni(Mn{sub 2−x}Co{sub x})O{sub 4} first increase and then decrease with the increase of Co content and NiMn{sub 1.5}Co{sub 0.5}O{sub 4} shows the best electrochemical performance in compared to the other two samples. Neutron diffraction and Rielveld refinement are further applied to analyze the site occupancies of the elements of Mn, Co, O and Ni. A certain amount of Co ions substitution are favorable to enhance the electrochemical performance, but excessive Co ions in 8a and 16d sites reduce the stability of host structure which leads to the poor electrochemical performance.

36 MATERIALS SCIENCE↗

Development of a dipodal Schiff base ligand with N-imine and O-naphtholate donors: A potential chelator towards Cu(II) metal ion established through potentiometric and spectrophotometric studies

A novel hydroxynaphthaldehyde derived Schiff base ligand N,N’-bis-[2-[(2-hydroxy-1-naphthyl)methyleneamino]ethyl]propanediamide (DOTA2HNAP) containing nitrogen and oxygen donor atoms has been developed. The lowest energy molecular structure of DOTA2HNAP and its complexes with Cu (II) metal ion were examined by molecular mechanics using MM+ force which later was re-optimized by semi-empirical method. The theoretical IR and UV spectra of the ligand were obtained using semi empirical/ZINDO/PM3 and were compared with the experimental ones. The coordinating ability of DOTA2HNAP with H{sup +} and Cu(II) ions was investigated in 1:99 (DMSO: water) binary solvent mixture at 25±1°C by potentiometric and spectrophotometric method. The electronic spectra of the ligand show three distinct peaks (253nm, 320nm and 360nm) implicating existence of the Schiff base in quinone form that was well supported by theoretical spectral studies. Out of various complex species forming in solution, all the metal ions show higher stability of complexes when in 1:1 metal-ligand stoichiometry, binding through two N-imine and two O-naphtholate groups.

36 MATERIALS SCIENCE↗

Phase transitions, electrical conductivity and chemical stability of BiFeO{sub 3} at high temperatures

The multiferroic perovskite BiFeO{sub 3} is reported to display two first order structural phase transitions. The structural phase transition at 925+-5 deg. C is demonstrated to be first order by calorimetry and dilatometry. Electrical conductivity measurements revealed that the high temperature phase above 925+-5 deg. C is semiconducting, in disagreement with recent reports. The sign and magnitude of the volumes of transition reflect the sign and magnitude of the discontinuities in electrical conductivity across the two first order phase transitions. A high partial pressure of oxygen was demonstrated to stabilise BiFeO{sub 3} towards peritectic decomposition. Finally, the origins of the commonly observed decomposition of BiFeO{sub 3} at high temperatures are discussed. - Graphical abstract: The structural phase transitions of multiferroic BiFeO{sub 3} are shown to first order, with discontinuous volume and electrical conductivity. Semiconductivity was found for all three polymorphs of BiFeO{sub 3}.

36 MATERIALS SCIENCE↗

Nanostructured Cu-Cr alloy with high strength and electrical conductivity

The influence of nanostructuring by high pressure torsion (HPT) on strength and electrical conductivity in the Cu-Cr alloy has been investigated. Microstructure of HPT samples was studied by transmission electron microscopy with special attention on precipitation of small chromium particles after various treatments. Effect of dynamic precipitation leading to enhancement of strength and electrical conductivity was observed. It is shown that nanostructuring leads to combination of high ultimate tensile strength of 790–840 MPa, enhanced electrical conductivity of 81%–85% IACS and thermal stability up to 500 °C. The contributions of grain refinement and precipitation to enhanced properties of nanostructured alloy are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

H-treatment impact on conductive-filament formation and stability in Ta{sub 2}O{sub 5}-based resistive-switching memory cells

In this article, we evidence the lower formation energy and improved stability of the conductive filament (CF) formed in TiN\Ta{sub 2}O{sub 5}\Ta resistive-switching memory cells treated in NH{sub 3} atmosphere at 400 °C. This annealing treatment results in (i) lower forming voltage, (ii) lower CF resistance, and (iii) longer retention lifetime of the oxygen-vacancy (V{sub o}) chain constituting the CF. Atomistic insights into these processes are provided by ab initio calculations performed for hydrogen (H) species incorporated in non-stoichiometric Ta{sub 2}O{sub 5} supercells: (i) V{sub o} formation energy is reduced by the presence of H, (ii) V{sub o}-chain CF conductivity is increased by V{sub o} + OH complex formation, and (iii) V{sub o}-chain retention is strengthened by the stable V{sub o} + OH complex. As a result, efficient CF formation and excellent state stability are obtained after 15 days at 250 °C.

36 MATERIALS SCIENCE↗

Synthesis of ruthenium metal doped titanium dioxide nanoparticles for CO{sub 2} hydrogenation

Two different types of Ru metal doped TiO{sub 2} nanoparticles were synthesized using a sole gel method with and without ionic liquid. It was clearly observed during characterizing the Ru-TiO{sub 2}-IL catalyst with respect to Ru-TiO{sub 2} catalyst that Ru metal is dispersed while using ionic liquid as reaction medium for catalyst synthesis. TEM image also reveals the presence of agglomeration free, stable and well dispersed Ru metal doped TiO{sub 2} nanoparticles in Ru-TiO{sub 2}-IL over a Ru-TiO{sub 2} catalyst. Such unique feature of the Ru-TiO{sub 2}-IL catalyst reflected in terms of high TON /TOF value of formic acid during the hydrogenation reaction of CO{sub 2} in task specific ionic liquid medium. Low catalysts loading, moisture/air stability, high selectivity, an easy reaction protocol for catalyst synthesis as well as stress-free reaction condition along with 6 times catalysts recycling is the major outcomes of the proposed protocol.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of Processing Parameters on Internal Stress of BN Films Prepared by Ion Mixing and Vapor Deposition

Boron nitride (BN) films have been attractive due to their excellent properties such as high hardness, thermal conductivity and chemical stability. In this study, BN films were prepared by depositing B vapor under simultaneous irradiation of N ions, that is ion mixing and vapor deposition (IVD) technique. The effects of processing parameters such as, acceleration voltage of N ions, transport ratio B/N and substrate temperature, on the internal stress of BN films were investigated. As a result, compressive internal stress increases at low acceleration voltage and high transport ratio B/N, which corresponded to the condition for formation of cBN phase. The hardness also becomes high at this condition and there is a strong correlation between internal stress and hardness of BN film. In addition to that, relaxation of internal stress by inserting inner layer between substrate and cBN layer has been carried out. It is confirmed that internal stress can be decreased by inner layer. Especially, relaxation of internal stress without degradation of high hardness can be achieved when the crystal structure of inner layer is hBN.

36 MATERIALS SCIENCE↗

TPCPF: Three-Phase Continuation Power Flow Tool for Voltage Stability Assessment of Distribution Networks With Distributed Energy Resources

This article presents a three-phase unbalanced continuation power flow algorithm for voltage stability assessment of distribution systems with high penetration of distributed energy resources (DERs). Analyzing distribution system voltage stability with DER will allow high penetration of renewable energy necessary for the sustainability goals. The developed algorithm can analyze voltage stability for both the meshed and radial systems and the balanced and unbalanced three-phase distribution systems. The developed tool allows the voltage stability analysis to facilitate the planning, operation, control, and distribution system management. The impact of DER on the voltage stability of several test cases has been analyzed considering constant power (P Q) and regulated-voltage (P V ) modes of operation for DER units. Moreover, different voltage stability case studies are presented to demonstrate the impact of unbalance, load increment, and network topology on the maximum loading capacity. Finally, results using the IEEE 13-node feeder, the 18-bus balanced shipboard system, the 13-node CIGRE benchmark system, and the 136-bus redial distribution feeder demonstrate that the developed continuation power flow tool can efficiently perform voltage stability analysis for active distribution systems.

42 ENGINEERING↗

Photocatalytic activity and stability of TiO{sub 2} and WO{sub 3} thin films

Photocatalysis represents a viable option for complete degrading the dye molecules resulted in the textile industry, up to products that do not represent environmental threats. The photocatalytic degradation of methyl orange has been investigated using TiO{sub 2}, WO{sub 3} and mixed thin films. The photodegradation efficiency is examined in correlation with the experimental parameters (irradiation time, H{sub 2}O{sub 2} addition and stability), along with the morphology and crystallinity data. The H{sub 2}O{sub 2} addition increases the photodegradation efficiency by providing additional hydroxyl groups and further reducing the recombination of the electron-hole pairs by reacting with the electrons at the catalyst interface. To test the stability of the photocatalytic films in long time running processes, batch series of experiments were conducted using contact periods up to 9 days. The results show that the thin films maintained their photocatalytic properties confirming their stability and viability for up-scaling. Highlights: Black-Right-Pointing-Pointer TiO{sub 2}, WO{sub 3} and mixed thin films Black-Right-Pointing-Pointer We tested the photocatalytic activity and photocatalyst stability over a period up to 9 days of continuous irradiation. Black-Right-Pointing-Pointer The influence of medium pH and oxidizing agent (H{sub 2}O{sub 2}) was analyzed.

36 MATERIALS SCIENCE↗

Magnetization stability analysis of the Stoner-Wohlfarth model under a spin-polarized current with a tilted polarization

The stationary-state solutions of magnetization dynamics under a spin-polarized current that was polarized in an arbitrary direction were investigated by solving the Landau-Lifshitz-Gilbert-Slonczewski equation for a single-domain magnet. Taking into consideration the uniaxial magnetic anisotropy, the equilibrium directions of the magnetization vectors were analytically obtained by solving an algebraic cubic equation. It was found that one to three pairs of magnetization equilibrium states existed, depending on the current intensity and the direction of the spin polarization. By numerically analyzing the stabilities of these equilibrium states, the threshold switching current for the reversing the magnetic vector was obtained under different current polarization configurations, which may be useful for use in future spintronics devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multilevel characteristics and memory mechanisms for nonvolatile memory devices based on CuInS{sub 2} quantum dot-polymethylmethacrylate nanocomposites

Nonvolatile memory devices based on CuInS{sub 2} (CIS) quantum dots (QDs) embedded in a polymethylmethacrylate (PMMA) layer were fabricated using spin-coating method. The memory window widths of the capacitance-voltage (C-V) curves for the Al/CIS QDs embedded in PMMA layer/p-Si devices were 0.3, 0.6, and 1.0 V for sweep voltages of ±3, ±5, and ±7 V, respectively. Capacitance-cycle data demonstrated that the charge-trapping capability of the devices with an ON/OFF ratio value of 2.81 × 10{sup −10} was maintained for 8 × 10{sup 3} cycles without significant degradation and that the extrapolation of the ON/OFF ratio value to 1 × 10{sup 6} cycles converged to 2.40 × 10{sup −10}, indicative of the good stability of the devices. The memory mechanisms for the devices are described on the basis of the C-V curves and the energy-band diagrams.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Computational study of AuSi{sub n} (n=1-9) nanoalloy clusters invoking DFT based descriptors

Nanoalloy clusters formed between Au and Si are topics of great interest today from both scientific and technological point of view. Due to its remarkable catalytic, electronic, mechanical and magnetic properties Au-Si nanoalloy clusters have extensive applications in the field of microelectronics, catalysis, biomedicine, and jewelry industry. Density Functional Theory (DFT) is a new paradigm of quantum mechanics, which is very much popular to study the electronic properties of materials. Conceptual DFT based descriptors have been invoked to correlate the experimental properties of nanoalloy clusters. In this venture, we have systematically investigated AuSi{sub n} (n=1-9) nanoalloy clusters in the theoretical frame of the B3LYP exchange correlation. The experimental properties of AuSi{sub n} (n=1-9) nanoalloy clusters are correlated in terms of DFT based descriptors viz. HOMO-LUMO gap, Electronegativity (χ), Global Hardness (η), Global Softness (S) and Electrophilicity Index (ω). The calculated HOMO-LUMO gap exhibits interesting odd-even alteration behaviour, indicating that even numbered clusters possess higher stability as compare to their neighbour odd numbered clusters. This study also reflects a very well agreement between experimental bond length and computed data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Theoretical investigation of the atomic and electronic structure of Li{sub x}BC{sub 3} intercalated compounds

Li{sub x}BC{sub 3} intercalated compounds with various configurations are studied for their possible application as electrode materials for lithium current sources. For this purpose, the band structure and the density of states were calculated for each structure, and energy stability and possible deformations due to a change in the unit cell volume during intercalation are investigated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure, elasticity, bonding features and mechanical behaviour of zinc intermetallics: A DFT study

The structural stability, electronic structure, elastic and mechanical properties of TiZn and ZrZn intermetallics have been studied using ab-initio full potential linearized augmented plane wave (FP-LAPW) method within generalized gradient approximation for exchange and correlation potentials. The various structural parameters, such as lattice constant (a{sub 0}), bulk modulus (B), and its pressure derivative (B’) are analysed and compared. The investigation of elastic constants affirm that both TiZn and ZrZn are elastically stable in CsCl (B{sub 2} phase) structure. The electronic structures have been analysed quantitatively from the band structure which reveals the metallic nature of these compounds. To better illustrate the nature of bonding and charge transfer, we have also studied the Fermi surfaces. The three well known criterion of ductility namely Pugh’s rule, Cauchy’s pressure and Frantsevich rule elucidate the ductile nature of these compounds.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of TRPN dendrimer-modified disordered mesoporous silica for CO{sub 2} capture

Highlights: • A novel series of TRPN dendrimers are synthesized. • Structurally disordered mesoporous silica was used to develop the CO{sub 2} adsorbent. • The CO{sub 2} adsorption capacity is relatively high. • The sorbent exhibits a high stability after 12 cycling runs. • The sorbent achieves complete desorption at low temperature (60 °C). - Abstract: A novel series of tri(3-aminopropyl) amine (TRPN) dendrimers were synthesized and impregnated on structurally disordered mesoporous silica (DMS) to generate CO{sub 2} adsorbents (TS). The physicochemical and adsorption properties of the adsorbents before and after dendrimer modification were characterized by X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM) and N{sub 2} adsorption–desorption (N{sub 2}-BET) techniques. CO{sub 2} adsorption–desorption tests indicated that the sorbent demonstrates high CO{sub 2} adsorption capacity (138.1 mg g{sup −1} for G1 sample TS-G1-3CN-50 and 91.7 mg g{sup −1} for G2 sample TS-G2-6CN-50), and can completely desorb CO{sub 2} under vacuum at 60 °C. Its CO{sub 2} adsorption capacity at 25 °C increases with the amine loading, achieving the highest adsorption capacity (140.6 mg g{sup −1} for TS-G1-3CN) at 60%. The developed TS materials exhibited excellent cycling stability. After 12 consecutive adsorption–desorption runs, TS-G1-3CN-50 shows an adsorption capacity of 136.0 mg g{sup −1}, retaining 98.5% of its original value.

36 MATERIALS SCIENCE↗

Xenon doping of glow discharge polymer by ion implantation

We demonstrate controlled doping of a glow discharge polymer by implantation with 500 keV Xe ions at room temperature. The Xe retention exhibits a threshold behavior, with a threshold dose of {approx}2 x 10{sup 14} cm{sup -2}. Doping is accompanied by irradiation-induced changes in the polymer composition, including gradual H loss and a more complex non-monotonic behavior of the O concentration. The matrix composition saturates at C{sub 0.77}H{sub 0.22}O{sub 0.01} for Xe doses above {approx}5 x 10{sup 14} cm{sup -2} and up to the maximum dose studied (5 x 10{sup 15} cm{sup -2}). The retention mechanism is attributed to the modification of the polymer from a chain-like to clustered ring structure. The dopant profile and the elemental composition of the implanted polymer exhibit good stability upon thermal annealing up to 305 deg. C.

36 MATERIALS SCIENCE↗

Atomistic mechanisms governing structural stability change of zinc antimony thermoelectrics

The structural stability of thermoelectric materials is a subject of growing importance for their energy harvesting applications. Here, we study the microscopic mechanisms governing the structural stability change of zinc antimony at its working temperature, using molecular dynamics combined with experimental measurements of the electrical and thermal conductivity. Our results show that the temperature-dependence of the thermal and electrical transport coefficients is strongly correlated with a structural transition. This is found to be associated with a relaxation process, in which a group of Zn atoms migrates between interstitial sites. This atom migration gradually leads to a stabilizing structural transition of the entire crystal framework, and then results in a more stable crystal structure of β–Zn{sub 4}Sb{sub 3} at high temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-assembled Ag nanoparticle network passivated by a nano-sized ZnO layer for transparent and flexible film heaters

We investigated a self-assembled Ag nanoparticle network electrode passivated by a nano-sized ZnO layer for use in high-performance transparent and flexible film heaters (TFFHs). The low temperature atomic layer deposition of a nano-sized ZnO layer effectively filled the uncovered area of Ag network and improved the current spreading in the self-assembled Ag network without a change in the sheet resistance and optical transmittance as well as mechanical flexibility. The time-temperature profiles and heat distribution analysis demonstrate that the performance of the TFTH with the ZnO/Ag network is superior to that of a TFFH with Ag nanowire electrodes. In addition, the TFTHs with ZnO/Ag network exhibited better stability than the TFFH with a bare Ag network due to the effective current spreading through the nano-sized ZnO layer.

36 MATERIALS SCIENCE↗