SEARCH · Search NASA

Results for “Resource availability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

All sources NASA NTRS DOE OSTI

DOE OSTI2015

Pilgrim Hot Springs geothermal exploration, 2010-2014 Final report [Recovery Act: Validation of Innovative Exploration Techniques, Pilgrim Hot Springs, Alaska]

Drilling and temperature logging campaigns between the late 1970's and early 1980’s measured temperatures at Pilgrim Hot Springs in excess of 90°C. Between 2010 and 2014 the University of Alaska used a variety of methods including geophysical surveys, remote sensing techniques, heat budget modeling, and additional drilling to better understand the resource and estimate the available geothermal energy.

15 GEOTHERMAL ENERGY↗

DOE OSTI2015

Pilgrim Hot Springs geothermal exploration, 2010-2014 Final report. [Southwest Alaska Regional Geothermal Energy Project]

15 GEOTHERMAL ENERGY↗

DOE OSTI2015

Fast Dynamic Simulation-Based Small Signal Stability Assessment and Control

Power grid planning and operation decisions are made based on simulation of the dynamic behavior of the system. Enabling substantial energy savings while increasing the reliability of the aging North American power grid through improved utilization of existing transmission assets hinges on the adoption of wide-area measurement systems (WAMS) for power system stabilization. However, adoption of WAMS alone will not suffice if the power system is to reach its full entitlement in stability and reliability. It is necessary to enhance predictability with "faster than real-time" dynamic simulations that will enable the dynamic stability margins, proactive real-time control, and improve grid resiliency to fast time-scale phenomena such as cascading network failures. Present-day dynamic simulations are performed only during offline planning studies, considering only worst case conditions such as summer peak, winter peak days, etc. With widespread deployment of renewable generation, controllable loads, energy storage devices and plug-in hybrid electric vehicles expected in the near future and greater integration of cyber infrastructure (communications, computation and control), monitoring and controlling the dynamic performance of the grid in real-time would become increasingly important. The state-of-the-art dynamic simulation tools have limited computational speed and are not suitable for real-time applications, given the large set of contingency conditions to be evaluated. These tools are optimized for best performance of single-processor computers, but the simulation is still several times slower than real-time due to its computational complexity. With recent significant advances in numerical methods and computational hardware, the expectations have been rising towards more efficient and faster techniques to be implemented in power system simulators. This is a natural expectation, given that the core solution algorithms of most commercial simulators were developed decades ago, when High Performance Computing (HPC) resources were not commonly available.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2016

Identifying Sustainable Design Opportunities in Tribal Hotels and Casinos: Mescalero Inn of the Mountain Gods Hotel and Casino

The Indian Gaming Regulatory Act, passed by Congress on October 17, 1988 provided tribes with the Federal statute to pursue gaming activities on tribal lands. Many Native communities contribute to larger regional economies and tourism industries. These casino facilities often include resort-style hotel amenities. Not surprisingly, they are also large consumers of energy, operating 24 hours a day and 7 days a week. Tribes with hotels and casinos can implement sustainable design features and not only receive economic gain, but also environmental and community benefits. The intention of this paper is to identify sustainable design opportunities at the Inn of the Mountain Gods Hotel and Casino. This research stems from previous work the researcher conducted and subsequently published for the Illinois Green Business Association. First, the paper reviews what sustainable design is and points of interest when considering sustainable construction. Next, the paper explores the precedents set by the Blue Lake Rancheria, Rincon Band of Luiseno Indians, and the Forest County Potawatomi Tribe. Then, the research examines areas to collect baseline information and identify opportunities in sustainable design for the Mescalero Apache Tribe, Inn of the Mountain Gods Hotel and Casino located in New Mexico. Lastly, the work explores the resources and funding options available to the tribe.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2017

Performance Analysis of Large Scale HPC Workflows for Earth System Models

Climate assessment reports, such as the Intergovernmental Panel on Climate Change’s 5th assesment report [IPCC AR5; IPCC et al., 2014] or the United States National Climate Assessment [U.S. Global Change Research Program, 2014], increasingly rely on many-ensemble climate projections from fully-coupled Earth system models (ESM) to asses possible future climate states. ESM participate in a large set of Coupled Model Intercomparson Projects (CMIP) to better understand their models and the climate system, so that they may provide credible climate projections. However, fully participating in these intercomparison exercises represents an extremely large computational personnel burden for modeling centers [Eyring et al., 2016, Williams et al., 2016a]. However, there has been little attention within the climate modeling community paid to the in situ performance of ESMs up until now. Recently a computational performance model intercomparison project (CPMIP) for CMIP6 has begun [Balaji et al., 2017], but there has not yet been an effort to gather, process, and analyze the historical performance data that has been saved within archived log files from previous modeling efforts, nor the development of performance analysis system capable of providing detailed statistical analyses or visualizations of this performance data. Therefore, we’ve begun a joint effort to analyze the historical and current performance data on both GFDL and OLCF modeling systems. Here, we have developed a preliminary performance analysis system to captue, analyize, and visualize end-to-end in situ performance data and applied it to NOAA/GFDL’s post-processing system. Through the course of the project a number of performance improvements have been made, with the steps necessary to handle the expected volume of data (Big Data) likely to come out of the CMIP6 exercises (TB to PB) provided. We have also begun developing a statistical workload model that will allow modeling centers to determined their expected scientific throughput in the context of expected resource (computational and personnel) availability and accounting for typical workflow disruptions. This will allow them to develop a CMIP participation strategy and maximize their level of participation in the exercises. We expect this infrastructure, and the data it produces, to ultimately allow us to identify performance issues and workflow errors that exist across Earth system modeling centers, and possibly HPC modeling centers in general. Center-independent solutions to workflow or performance issues would help alleviate the computational burden for CMIP6+ modeling projects and should realize both labor and cost savings benefits throughout the CMIP community.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Modeling efficient and equitable distribution of COVID-19 vaccines

Producing and distributing COVID-19 vaccine during the pandemic is a major logistical challenge requiring careful planning and efficient execution. This report presents information on logistical, policy and technical issues relevant to rapidly fielding a COVID-19 vaccination program. For this study we (a) conducted literature review and subject matter expert elicitation to understand current vaccine manufacturing and distribution capabilities and vaccine allocation strategies, (b) designed a baseline vaccine distribution strategy and modeling strategy to provide insight into the potential for targeted distribution of limited initial vaccine supplies, and (c) developed parametric interfaces to enable vaccine distribution scenarios to be analyzed in depth with Sandias Adaptive Recovery Model that will allow us evaluate the additional sub- populations and alternative distribution scenarios from a public health benefit and associated economic disruption Principal issues, challenges, and complexities that complicate COVID-19 vaccine delivery identified in our literature and subject matter expert investigation include these items: The United States has not mounted an urgent nationwide vaccination campaign in recent history. The existing global manufacturing and distribution infrastructure are not able to produce enough vaccine for the population immediately. Vaccines, once available will be scarce resources. Prioritization for vaccine allocation will be built on existing distribution networks. Vaccine distribution may not have a universal impact on disease transmission and morbidity because of scarcity, priority population demographics, and underlying disease transmission rates. Considerations for designing a vaccine distribution strategy are discussed. A baseline distribution strategy is designed and tested using the Adaptive Recovery Model, which couples a deterministic compartmental epidemiological model and a stochastic network model. We show the impact of this vaccine distribution strategy on hospitalizations, mortality, and contact tracing requirements. This model can be used to quantitatively evaluate alternative distribution scenarios, guiding policy decisions as vaccine candidates are narrowed down.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Initial use of Nek5000/Cardinal to improve closure models in Pronghorn

Heat transfer coefficient closure models for pebble bed reactors are built using a data-driven approach by leveraging the capabilities of an Evolutionary Algorithm entitled Particle Swarm Optimization (PSO). In the present work, the Computational Fluid Dynamics code nekRS was used in order to collect the high-fidelity flow data for a core with 1,568 pebbles. To characterize the heat transfer, multiple concentric regions were considered to extract the physical quantities of interest, e.g./ the Reynolds number. The PSO algorithm is employed as part of an inverse problem targeting determine what are the coefficients for a Nusselt number correlation to match the collected data. Such correlation should follow any given format that is defined a priori. Finally, two correlations are proposed, one with an implicit dependence on the pebbles’ wall temperatures and another expressed as a fully explicit correlation depending on the flow conditions and the position within the core. Anyway, given the generic nature of the proposed approach, correlations following different formats could be tested. Preliminary results for the high-fidelity simulation of a fast MSR core are presented. The target Reynolds number is currently 20K, with the expectation that this will increase, pending the availability of further computational resources. These simulations will be used to inform lower fidelity models, including a coarse CFD turbulence model in Pronghorn. Additionally, they will serve as a reference for the RANS models in Nek5000/NekRS.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2022

An Assessment of Hydropower Potential at National Conduits

In support of the mission of the US Department of Energy Water Power Technologies Office to promote domestic next-generation hydropower growth, this study provides a first-of-its-kind assessment of the hydropower development potential on existing water conduits nationwide. This study evaluates the potential for conduit hydropower development in the municipal, agricultural, and industrial sectors across the United States. The research team developed systematic methods to evaluate conduit hydropower capacity potential (MW) and energy generation potential (GWh/year) at four categories of conduits across the United States. They include the following: (1) Water supply pipelines for municipal and industrial uses, (2) Wastewater discharge conduits from municipal and industrial systems, (3) Agricultural water conduits including irrigation canals and ditches in the 17 western states that rely heavily on irrigation, and (4) Thermoelectric power plant cooling water discharge conduits. For each type of conduit, the team developed and implemented a method to estimate hydraulic head and annual water flows—and the hydropower potential—based on analyses of satellite imagery, topography, and existing data sets on water systems and power plants. These methods support a consistent, replicable estimate of conduit hydropower potential across 3 sectors and all 50 states, aggregated at the county and state levels. The assessment was conducted at the reconnaissance level, considering resources that could be available for development at the state and national levels using present-day assumptions about conduit hydropower technology.

13 HYDRO ENERGY↗

DOE OSTI2023

GeoThermalCloud: A Machine Learning Tool for Discovery, Exploration, and Development of Hidden Geothermal Resources

In this 25 minute presentation, we showcase our open source “GeoThermalCloud” tool for identifying hidden geothermal resources using a publicly available dataset for southwestern New Mexico. The presenters include Bulbul Ahmmed and Luke Frash. All of the visuals use source material from LA-UR approved publications and this work falls under the Earth Sciences DUSA. The code shown in this video is already released with LANL approval in open source format on GitHub and DockerHub. The audio in this video includes only material on the topics of geothermal energy and machine learning applied to geothermal energy. The primary machine learning method used is LANL’s Non-negative Matrix Factorization “NMFk” method. Modeling work also mentions LANL’s Geothermal Design Tool “GeoDT” which is another approved open source code that has been released by LANL. This work was performed for DOE Geothermal Technologies Office (DE-EE-3.1.8.1). The host for the released video is intended to be YouTube or a suitable perpetual data repository such as GDR.

15 GEOTHERMAL ENERGY↗

DOE OSTI2024

An Analysis of High Opportunity Geothermal Leasing Areas on BLM and USFS Lands

This analysis, conducted by the National Renewable Energy Laboratory (NREL) with support from the U.S. Department of Energy (DOE) Geothermal Technologies Office (GTO), models potential geothermal deployment on BLM and USFS land for the years 2025, 2030, 2035, and 2050 under various scenarios using the Renewable Energy Potential (reV) model and the Regional Energy Deployment System (ReEDS) model. This report identifies potential future high opportunity geothermal leasing areas (i.e., Best, Middle, and Least identified opportunities) based on available data for geothermal resource potential, natural resource conflicts, and transmission access. In addition, this analysis considers the impacts of the Energy Policy Act of 2005's (EPAct 2005's) default competitive leasing provisions, specifically the impact this may have had on geothermal resource discovery outside of known geothermal resource areas.

15 GEOTHERMAL ENERGY↗

DOE OSTI2025

Development and Validation of Smart Building Technology Modules for Academic and Professional Education (Final Technical Report)

Smart building technologies can improve building energy efficiency and resilience, reduce carbon emissions, and provide load flexibility to the grid. However, in both college curricula and building professionals’ continuing education, there is a lack of systematic instruction on smart building technologies. Slipstream, partnering with Texas A&M University (TAMU), the Society of Building Science Educators (SBSE), and the National Institute of Building Sciences (NIBS), developed a semester-long smart building curriculum for college students and 16 training videos for building professionals and the general public. The education and training cover the drivers and benefits of smart building technologies, key building energy systems, the latest sensor technologies and IoT devices, and focus on topics related to smart building controls (i.e., energy management information systems, smart building control platforms, cybersecurity, grid-interactive-efficient buildings [GEBs], smart building control methods, and occupant-centric control). The smart building curriculum for college students was taught at TAMU in the Spring semester of 2024 as part of the validation process. Student feedback was collected and summarized in a validation report by TAMU. The curriculum material was also reviewed by SBSE faculty who are interested in teaching smart building technology-related courses. Suggestions on revisions and better adoption of the materials by other faculty across the architectural, engineering, and construction (AEC) domains were compiled in a distinct validation report by SBSE. The SBSE validation report was used to create structured subsets of the curriculum material for adoption at different levels in different sub-disciplines. These subsets are categorized and offered on the SBSE website (https://www.sbse.org/courses/Smart-Building-Technologies). The 16 training videos for building professionals and the general public were previewed by 17 industry experts, and feedback and suggested changes were incorporated into the final version of these videos. The videos are organized into a smart building technology training course and published on the Whole Building Design Guide website (https://www.wbdg.org/ce/doe/bto/sbtt), which is hosted by the National Institute of Building Sciences (NIBS). Project team members created marketing materials to promote the awareness of these free, publicly available education and training resources. Outreach and marketing activities included creating short promotional videos, building project webpages, making project announcements on social media, conducting an email campaign, and directly reaching out to faculties and building professionals. This report describes the project approach, provides outlines of the training materials, along with links to resources, and identifies lessons learned in creating the content. We also suggest ways to scale the instruction of smart building concepts to empower the workforce to accelerate the adoption of smart building technologies in the real world.

99 GENERAL AND MISCELLANEOUS↗

DOE OSTI2025

Congestion Management Solutions for Enhanced Distribution System Operations with Aggregated Distribution Grid Resources Providing Grid Services and Market Participation

Microgrids and other aggregations of distribution grid resources (DGRs) are poised to actively participate in electricity markets and provide essential grid services in the coming years. In fact, DGRs already play such a role through behind-the-meter (BTM) demand response programs and small-scale BTM dispatchable generation initiatives. At the same time, the rapid growth of artificial intelligence (AI) and cryptocurrency datacenters imposes significant, often unpredictable, demands on the power distribution system. Aggregated DGRs can serve as flexible resources that help mitigate these pressures by using available transmission and distribution capacity more efficiently, supporting resource adequacy and other reliability services, and providing bridge strategies while long-term transmission infrastructure is being developed. The impacts this activity will have on distribution networks are not fully understood and could present significant challenges for distribution utilities due to capacity constraints and the need for congestion management. Technical issues include reverse power flow, variability and possible degradation of equipment integrity, voltage violations, and customer power quality concerns. These issues will likely intensify as electricity market operators across the United States implement Federal Energy Regulatory Commission Order 2222 over the next few years.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2019

Defending our public biological databases as a global critical infrastructure

Progress in modern biology is being driven, in part, by the large amounts of freely available data in public resources such as the International Nucleotide Sequence Database Collaboration (INSDC), the world’s primary database of biological sequence (and related) information. INSDC and similar databases have dramatically increased the pace of fundamental biological discovery and enabled a host of innovative therapeutic, diagnostic, and forensic applications. However, as high-value, openly shared resources with a high degree of assumed trust, these repositories share compelling similarities to the early days of the Internet. Consequently, as public biological databases continue to increase in size and importance, we expect that they will face the same threats as undefended cyberspace. There is a unique opportunity, before a significant breach and loss of trust occurs, to ensure they evolve with quality and security as a design philosophy rather than costly “retrofitted” mitigations. Furthermore this Perspective surveys some potential quality assurance and security weaknesses in existing open genomic and proteomic repositories, describes methods to mitigate the likelihood of both intentional and unintentional errors, and offers recommendations for risk mitigation based on lessons learned from cybersecurity.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

DOE OSTI2023

Engineering custom morpho- and chemotypes of Populus for sustainable production of biofuels, bioproducts, and biomaterials

Humans have been modifying plant traits for thousands of years, first through selection (i.e., domestication) then modern breeding, and in the last 30 years, through biotechnology. These modifications have resulted in increased yield, more efficient agronomic practices, and enhanced quality traits. Precision knowledge of gene regulation and function through high-resolution single-cell omics technologies, coupled with the ability to engineer plant genomes at the DNA sequence, chromatin accessibility, and gene expression levels, can enable engineering of complex and complementary traits at the biosystem level. Populus spp., the primary genetic model system for woody perennials, are among the fastest growing trees in temperate zones and are important for both carbon sequestration and global carbon cycling. Ample genomic and transcriptomic resources for poplar are available including emerging single-cell omics datasets. To expand use of poplar outside of valorization of woody biomass, chassis with novel morphotypes in which stem branching and tree height are modified can be fabricated thereby leading to trees with altered leaf to wood ratios. These morphotypes can then be engineered into customized chemotypes that produce high value biofuels, bioproducts, and biomaterials not only in specific organs but also in a cell-type-specific manner. For example, the recent discovery of triterpene production in poplar leaf trichomes can be exploited using cell-type specific regulatory sequences to synthesize high value terpenes such as the jet fuel precursor bisabolene specifically in the trichomes. By spatially and temporally controlling expression, not only can pools of abundant precursors be exploited but engineered molecules can be sequestered in discrete cell structures in the leaf. The structural diversity of the hemicellulose xylan is a barrier to fully utilizing lignocellulose in biomaterial production and by leveraging cell-type-specific omics data, cell wall composition can be modified in a tailored and targeted specific manner to generate poplar wood with novel chemical features that are amenable for processing or advanced manufacturing. Precision engineering poplar as a multi-purpose sustainable feedstock highlights how genome engineering can be used to re-imagine a crop species.

09 BIOMASS FUELS↗

DOE OSTI2021

Reinspection of a Clinical Proteomics Tumor Analysis Consortium (CPTAC) Dataset with Cloud Computing Reveals Abundant Post-Translational Modifications and Protein Sequence Variants

The Clinical Proteomic Tumor Analysis Consortium (CPTAC) has provided some of the most in-depth analyses of the phenotypes of human tumors ever constructed. Today, the majority of proteomic data analysis is still performed using software housed on desktop computers which limits the number of sequence variants and post-translational modifications that can be considered. The original CPTAC studies limited the search for PTMs to only samples that were chemically enriched for those modified peptides. Similarly, the only sequence variants considered were those with strong evidence at the exon or transcript level. In this multi-institutional collaborative reanalysis, we utilized unbiased protein databases containing millions of human sequence variants in conjunction with hundreds of common post-translational modifications. Using these tools, we identified tens of thousands of high-confidence PTMs and sequence variants. We identified 4132 phosphorylated peptides in nonenriched samples, 93% of which were confirmed in the samples which were chemically enriched for phosphopeptides. In addition, our results also cover 90% of the high-confidence variants reported by the original proteogenomics study, without the need for sample specific next-generation sequencing. Finally, we report fivefold more somatic and germline variants that have an independent evidence at the peptide level, including mutations in ERRB2 and BCAS1. In this reanalysis of CPTAC proteomic data with cloud computing, we present an openly available and searchable web resource of the highest-coverage proteomic profiling of human tumors described to date.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2026

Evaluation of a high-resolution regional climate simulation for surface and hub-height wind climatology over North America

Assessing the availability of key wind resources requires augmenting observations to support the implementation of wind energy infrastructure. However, observations are limited, necessitating the development of high-resolution, long-term gridded datasets. This study presents a robust, dynamically downscaled climatological dataset, offering 20 years of hourly wind data at a 4 km spatial resolution across North America, and evaluates its performance against observations, including meteorological towers and automated surface-observing system (ASOS) stations, as well as coarse-resolution reanalysis data (the European Centre for Medium-Range Weather Forecasts (ECMWF) reanalysis version 5 (ERA5)). Results demonstrate that the downscaled high-resolution wind data outperform ERA5 in regions of complex terrain and coastal areas, with improved overlap coefficients for wind data distributions and reduced root mean square errors (RMSEs) for hub-height and near-surface diurnal wind patterns. The downscaled simulation also captures the synoptic drivers of seasonal wind direction patterns reasonably well, indicated by high wind rose similarity indices. This study also provides an analysis of interannual variability, utilizing the dataset's full 20-year period, and model uncertainty, generated by varying model initial conditions and physics parameterizations across 1-year ensemble members, which are key considerations for wind resource assessment in wind farm development.

17 WIND ENERGY↗

NASA NTRS1972

Standards guide for space and earth sciences computer software

Guidelines for the preparation of systems analysis and programming work statements are presented. The data is geared toward the efficient administration of available monetary and equipment resources. Language standards and the application of good management techniques to software development are emphasized.

Mason, G.↗

NASA NTRS1975

An evaluation of the NASA scientific and technical information system

The best assessment of a scientific and technical information system is obtained from users. NASA has conducted system evaluation studies by talking with those the system is intended to serve - engineers and scientists working in their professional roles. The purpose was to assess the usefulness of the present system and to identify areas and ways in which the system can be made more effective. Emphasis was placed on NASA's announcement and current awareness media, its publication program, and its interactive retrieval system (RECON). The results show that the system is responsive to users' needs in most areas. Specific areas for improvement are identified and the steps NASA has taken are outlined. The major effect was a vastly improved communication with the users regarding what is available and how these resources can assist in solving information problems.

Pryor, H. E.↗