Search NASA⌕ Search

SEARCH · Search NASA

Results for “Shuttle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Space salvage - A report on Shuttle mission STS 51-A

The success of the Space Shuttle Orbiter and Manned Maneuvering Unit (MMU) in the rendezvous and capture of the Westar and Palapa satellites was largely attributable to the availability and fidelity of numerous simulators, which facilitated real time development and verification of satellite rescue procedures and hardware. This complex Space Shuttle mission, STS 51-A, was developed and executed in only 8 months; by contrast, the Solar Maximum repair mission was developed over a period of three years. Attention is presently given to Orbiter sensors, satellite night stationkeeping, satellite stabilization tasks, MMU tasks, and preparatory simulations.

Hauck, F. H.↗

Space Shuttle development

The technical-planning and decision-making processes involved in the initiation of the NASA Space Shuttle program in 1970-1972 are briefly discussed, responding to the critical evaluation of Logsdon (1986). The complex nature of the interactions among White House, OMB, DOD, and NASA; the difficulty of making long-term commitments under the U.S. system; the positive technological achievements of the program; and the need for unemotional evaluation of the policy options available after the loss of the Challenger are stressed. In a reply by Logsdon, it is argued that the structuring of the policy process itself and the presentation of the Shuttle to Congress as a relatively inexpensive routine launch system for virtually all government needs were directly related to its failure to gain continuing full funding from Administrations and Congress. It is suggested that a strong proposal of bold scientific and exploratory objectives for the space program could be more successful in gaining such long-term support.

Fletcher, J. C.↗

Determination of lift and drag characteristics of Space Shuttle Orbiter using maximum likelihood estimation technique

This paper presents the technique and results of maximum likelihood estimation used to determine lift and drag characteristics of the Space Shuttle Orbiter. Maximum likelihood estimation uses measurable parameters to estimate nonmeasurable parameters. The nonmeasurable parameters for this case are elements of a nonlinear, dynamic model of the orbiter. The estimated parameters are used to evaluate a cost function that computes the differences between the measured and estimated longitudinal parameters. The case presented is a dynamic analysis. This places less restriction on pitching motion and can provide additional information about the orbiter such as lift and drag characteristics at conditions other than trim, instrument biases, and pitching moment characteristics. In addition, an output of the analysis is an estimate of the values for the individual components of lift and drag that contribute to the total lift and drag. The results show that maximum likelihood estimation is a useful tool for analysis of Space Shuttle Orbiter performance and is also applicable to parameter analysis of other types of aircraft.

Trujillo, B. M.↗

Rarefied flow lift-to-drag measurements of the Shuttle Orbiter

This report presents a discussion of the analysis and the results of sensitive micro-g accelerometry measurements on the Shuttle Orbiter in the rarefied flow flight regime, that is, from altitudes of 60 km to 160 km. A brief description of the experimental apparatus called High Resolution Accelerometer Package (HiRAP) is given along with a description of the ground processing to obtain the lift-to-drag ratio (L/D) from the flight measurements. The flight results of L/D from six missions are presented and discussed. Comparisons are made with preflight wind tunnel data in the near continuum viscous interaction regime and preflight analytical estimates in the rarefied transition regime. Excellent agreement is obtained between flight and wind tunnel data in the viscous regime, but differences are noted between flight and preflight predictions in the transition regime. Free molecule flow F/D data are also obtained on each mission. Comparisons of flight data with classical theory show that complete diffuse reflection is not an appropriate model for rarefied aerodynamic coefficient calculations, and, for the Shuttle, some specular fraction is required. Surface reflection laws are explored to define the sensitivity of the L/D measurements to gas-surface molecule interactions.

Blanchard, R. C.↗

Flight training for Space Shuttle missions

The training performed for flights of the Space Shuttle is intensive and extremely complicated. The training is totally dependent on computer generated training situations in both cockpit simulations and in integrated simulations between the simulators and the Mission Control Center (MCC). These simulations form a complex set of dress rehearsals of the actual spaceflight allowing the participants to address problems in a real world situation and utilize problem solving rationale just as they will be called upon to do during the real flight. The benefits of this type of training have been demonstrated during the flights of the Shuttle as individual flight controllers and whole teams have been tested by various untoward situations. This system of integrated simulation and training, more complex than ever, will be continued in use in the future using even more intricate man-machine interactions required to initialize, control, and operate it.

Hughes, F. E.↗

Summary of longitudinal stability and control parameters as determined from space shuttle Columbia flight test data

Extensive wind tunnel tests were conducted to establish the preflight aerodynamics of the Shuttle vehicle. This paper presents the longitudinal, short-period aerodynamics of the space shuttle Columbia as determined from flight test data. These flight-determined results are compared with the preflight predictions, and areas of agreement or disagreement are noted. In addition to the short-period aerodynamics, the pitch RCS effectiveness was determined.

Suit, W. T.↗

Radiometric responsivity determination for Feature Identification and Location Experiment (FILE) flown on space shuttle mission

A procedure was developed to obtain the radiometric (radiance) responsivity of the Feature Identification and Local Experiment (FILE) instrument in preparation for its flight on Space Shuttle Mission 41-G (November 1984). This instrument was designed to obtain Earth feature radiance data in spectral bands centered at 0.65 and 0.85 microns, along with corroborative color and color-infrared photographs, and to collect data to evaluate a technique for in-orbit autonomous classification of the Earth's primary features. The calibration process incorporated both solar radiance measurements and radiative transfer model predictions in estimating expected radiance inputs to the FILE on the Shuttle. The measured data are compared with the model predictions, and the differences observed are discussed. Application of the calibration procedure to the FILE over an 18-month period indicated a constant responsivity characteristic. This report documents the calibration procedure and the associated radiometric measurements and predictions that were part of the instrument preparation for flight.

Wilson, R. G.↗

Measurements of plasma density and turbulence near the shuttle orbiter

In August 1985 the University of Iowa's Plasma Diagnostics Package was used in the Spacelab 2 mission to study the plasma environment near the shuttle orbiter. Measurements of the plasma density and the percentage density fluctuations yielded information about the structure of the orbiter's wake. These data appear to be in general agreement with previous shuttle results and with laboratory observations of plasma flow-body interactions.

Tribble, A.↗

Research opportunities in microgravity science and applications during shuttle hiatus

The opportunity to conduct microgravity and related research still exists, even with the temporary delay in the U.S. Space Shuttle program. Several ground-based facilities are available and use of these facilities is highly recommended for the preparation of near and far term shuttle or space station experiments. Drop tubes, drop towers, aircraft, sounding rockets and a wide variety of other ground-based equipment can be used to simulate microgravity. This paper concentrates on the materials processing capabilities available at NASA Lewis Research Center (NASA Lewis), Marshall Space Flight Center (MSFC), and the California Institute of Technology Jet Propulsion Laboratory (JPL). Also included is information on gaining access to these facilities.

Rosenthal, Bruce N.↗

Deriving Two-Dimensional Ocean Wave Spectra and Surface Height Maps from the Shuttle Imaging Radar (SIR-B)

Directional ocean wave spectra were derived from Shuttle Imaging Radar (SIR-B) imagery in regions where nearly simultaneous aircraft-based measurements of the wave spectra were also available as part of the NASA Shuttle Mission 41G experiments. The SIR-B response to a coherently speckled scene is used to estimate the stationary system transfer function in the 15 even terms of an eighth-order two-dimensional polynomial. Surface elevation contours are assigned to SIR-B ocean scenes Fourier filtered using a empirical model of the modulation transfer function calibrated with independent measurements of wave height. The empirical measurements of the wave height distribution are illustrated for a variety of sea states.

Tilley, D. G.↗

Utilization of Global Reference Atmosphere Model (GRAM) for shuttle entry

At high latitudes, dispersions in values of density for the middle atmosphere from the Global Reference Atmosphere Model (GRAM) are observed to be large, particularly in the winter. Trajectories have been run from 28.5 deg to 98 deg. The critical part of the atmosphere for reentry is 250,000 to 270,000 ft. 250,000 ft is the altitude where the shuttle trajectory levels out. For ascending passes the critical region occurs near the equator. For descending entries the critical region is in northern latitudes. The computed trajectory is input to the GRAM, which computes means and deviations of atmospheric parameters at each point along the trajectory. There is little latitude dispersion for the ascending passes; the strongest source of deviations is seasonal; however, very wide seasonal and latitudinal deviations are exhibited for the descending passes at all orbital inclinations. For shuttle operations the problem is control to maintain the correct entry corridor and avoid either aerodynamic skipping or excessive heat loads.

Joosten, Kent↗

Shuttle derived atmosphere

The shuttle descends along a rather shallow path, thus providing some information on the horizontal structure of the atmosphere. Small scale structures were suggested (shears, potholes). The best estimates of the shuttle drag coefficient and projected areas are used to go from accelerometer data to density through the use of BET's (Best Estimated Trajectories). Data are from the IMU's (Inertial Measurement Unit) and the HiRAP (High Resolution Accelerometer Package).

Findlay, John↗

Flow visualization study of a two-dimensional representation of the Space Shuttle launch pad configuration

The loss of the Space Shuttle Challenger was caused by the failure of the aft joint O-ring seals in its right solid rocket booster. It has been suggested by several sources that wind conditions through a reduction in temperature of the right solid rocket booster caused by the wind blowing across the cold external tank, played a role in the O-ring failure. To check the plausibility of the wind theory, an experiment was carried out in a water towing tank to visualize the flow past a two-dimensional model representing a cross section of the Space Shuttle launch configuration. The periodic formation of vortices was found to characterize the wake generated by the model. It is suggested that this organized motion in the flow is the dominant mechanism that accomplishes heat transfer from the external tank to the right solid rocket booster. Flow visualization results consisting of photographs that show instantaneous streamline patterns of the flow are presented.

Mclachland, B. G.↗

Digital data from shuttle photography: The effects of platform variables

Two major criticisms of using Shuttle hand held photography as an Earth science sensor are that it is nondigital, nonquantitative and that it has inconsistent platform characteristics, e.g., variable look angles, especially as compared to remote sensing satellites such as LANDSAT and SPOT. However, these criticisms are assumptions and have not been systematically investigated. The spectral effects of off-nadir views of hand held photography from the Shuttle and their role in interpretation of lava flow morphology on the island of Hawaii are studied. Digitization of photography at JSC and use of LIPS image analysis software in obtaining data is discussed. Preliminary interpretative results of one flow are given. Most of the time was spent in developing procedures and overcoming equipment problems. Preliminary data are satisfactory for detailed analysis.

Davis, Bruce E.↗

Comprehensive analysis of Shuttle Orbiter leeside surface infrared imagery obtained during atmospheric entry

The thermographic analysis techniques developed for processing of data from the Shuttle Infrared Leeside Temperature Sensing (SILTS) experiment are discussed. The SILTS experiment will obtain high-spatial-resolution infrared images of the leeside of the Space Shuttle Orbiter during atmospheric entry by means of a scanning infrared radiometer located atop the orbiter's vertical stabilizer. Comprehensive analysis of the SILTS thermography requires accurate consideration of all those factors (such as geometry of the observed surfaces, local surface emissivity, solar radiation, and other potential sources of image degradation) which may potentially affect the output of the infrared radiometer. An overview of the entire data processing procedure and brief descriptions of the data processing algorithms are presented.

Myrick, D. L.↗

Three dimensional simulation of the operation of a hollow cathode electron emitter on the Shuttle orbiter

Several researchers have suggested using hollow cathodes as plasma contactors for electrodynamic tethers, particularly to prevent the shuttle orbiter from charging to large negative potentials. Previous studies have shown that fluid models with anomalous scattering can describe the electron transport in hollow cathode generated plasmas. An improved theory of the hollow cathode plasmas is developed and computational results using the theory are compared with laboratory experiment. Numerical predictions for a hollow cathode plasma source of the type considered for use on the shuttle are presented as are three-dimensional NASCAP/LEO calculations of the emitted ion trajectories and the resulting potentials in the vicinity of the orbiter. The computer calculations show that the hollow cathode plasma source makes vastly superior contact with the ionospheric plasma compared with either an electron gun or passive ion collection by the orbiter.

Davis, V. A.↗

Potential directions for a second generation Space Shuttle

This paper reports on trends and potentials for advanced rocket vehicles which may be candidates for eventual phased replacement of the Shuttle. Although such a replacement need is not foreseen until 2002 at the earliest, due to the long time to develop a new vehicle its definition has already begun. The paper discusses the role of such a "Shuttle II' in the architecture of launch vehicles likely to exist in the post-2000 era, leading to its designation as a smaller, primarily passenger-carrying vehicle to complement large, unmanned cargo launch vehicles. While a two-stage glide-back fully reusable configuration is optimum for near-term technology, a single-stage-to-orbit reusable glide-back configuration is optimum for farther-term technology advances. For advanced technology which could be available in the mid-90s, such vehicle could orbit a payload weight equal to their own dry weight - a factor of 10 better than current launch vehicles.

Bekey, I.↗

The Shuttle Remote Manipulator System and its flight tests

The Shuttle Remote Manipulator System (SRMS) has now been flown on seven Space Shuttle Orbiter missions with an eighth mission imminent in June, 1984. This paper describes the design features of the SRMS, a six degree of freedom anthropomorphic man-machine system, and summarizes the results of its Orbital Flight Tests (OFT's) aimed at verifying performance and validating simulation models. In general, behavior and performance of the system has closely followed predictions made by nonreal-time and real-time simulations. Some typical comparisons are presented. Mention is made of operational performance demonstrated on recent flights.

Ravindran, R.↗