Search NASA⌕ Search

SEARCH · Search NASA

Results for “Waste Form”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Examining the Role of Canister Cooling Conditions on the Formation of Nepheline from Nuclear Waste Glasses

Nepheline (NaAlSiO 4 ) crystals can form during slow cooling of high-level waste (HLW) glass after it has been poured into a waste canister. Formation of these crystals can adversely affect the chemical durability of the glass. The tendency for nepheline crystallization to form in a HLW glass increases with increasing concentrations of Al 2 O 3 and Na 2 O.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Examining the Role of Canister Cooling Conditions on the Formation of Nepheline from Nuclear Waste Glasses

Nepheline (NaAlSiO 4 ) crystals can form during slow cooling of high-level waste (HLW) glass after it has been poured into a waste canister. Formation of these crystals can adversely affect the chemical durability of the glass. The tendency for nepheline crystallization to form in a HLW glass increases with increasing concentrations of Al 2 O 3 and Na 2 O.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Preclosure Risk Assessment for Deep Borehole Disposal

This report presents a preclosure radiological safety assessment for deep borehole disposal (DBD) of nuclear wastes. The primary purpose of the safety assessment is to identify risk factors for disposal operations, to aid in design for an engineering demonstration of technology for DBD. The assessment is based on a conceptual design for disposal packages and borehole systems that was developed previously. It considers operational steps that could be used for actual DBD, with internal and external initiating off-normal events, to develop insights that can be applied to an engineering demonstration that would be performed without using any form of nuclear waste. This research was performed as part of the deep borehole field test (DBFT). Based on revised U.S. Department of Energy (DOE) priorities in mid-2017, the DBFT and other research related to a DBD option was discontinued; ongoing work and documentation were closed out by the end of fiscal year (FY) 2017. This report was initiated as part of the DBFT and documented as an incomplete draft at the end of FY 2017. The report was finalized by Sandia National Laboratories in FY2018 without DOE funding, subsequent to the termination of the DBFT, and published in FY2019. iii

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Low Melting Temperature Glass for Immobilisation of Contaminated Zeolitic Ion Exchangers from Fukushima - 16494

The clean-up of the Fukushima Daiichi site continues to generate large volumes of spent adsorbents which need to be disposed of permanently, one of the candidates is a low temperature immobilisation process to avoid volatilising radioactive Cs and Sr species. To this end an immobilisation process with a maximum temperature of 600 deg. C was developed by sintering model waste with glass frit to form a dense Glass Composite Material (GCM) wasteform. A zeolitic model wasteform, chabazite, was sintered with two lead-based glass compositions, lead borosilicate (PBS) and a lead borate (PB) glass composition, at a maximum temperature of 600 deg. C. Full encapsulation of the zeolitic wasteform was achieved for waste-loadings up to 40 wt.% in PBS and 30 wt.% in PB in all cases, with both GCM systems showing foaming. PBS GCM formation was successful at a maximum of 600 deg. C, while the PB GCM formation was shown to be possible at a maximum temperature of 550 deg. C. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DEVELOPMENT OF GLASS MATRICES FOR HLW RADIOACTIVE WASTES

Vitrification is currently the most widely used technology for the treatment of high level radioactive wastes (HLW) throughout the world. Most of the nations that have generated HLW are immobilizing in either borosilicate glass or phosphate glass. One of the primary reasons that glass has become the most widely used immobilization media is the relative simplicity of the vitrification process, e.g. melt waste plus glass forming frit additives and cast. A second reason that glass has become widely used for HLW is that the short range order (SRO) and medium range order (MRO) found in glass atomistically bonds the radionuclides and governs the melt properties such as viscosity, resistivity, sulphate solubility. The molecular structure of glass controls contaminant/radionuclide release by establishing the distribution of ion exchange sites, hydrolysis sites, and the access of water to those sites. The molecular structure is flexible and hence accounts for the flexibility of glass formulations to waste variability. Nuclear waste glasses melt between 1050-1150 C which minimizes the volatility of radioactive components such as Tc{sup 99}, Cs{sup 137}, and I{sup 129}. Nuclear waste glasses have good long term stability including irradiation resistance. Process control models based on the molecular structure of glass have been mechanistically derived and have been demonstrated to be accurate enough to control the world's largest HLW Joule heated ceramic melter in the US since 1996 at 95% confidence.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Control of Nepheline Crystallization in Nuclear Waste Glass

Glass frits with a high B{sub 2}O{sub 3} concentration have been designed which, when combined with high-alumina concentration nuclear waste streams, will form glasses with durabilities that are acceptable for repository disposal and predictable using a free energy of hydration model. Two glasses with nepheline discriminator values closest to 0.62 showed significant differences in normalized boron release between the quenched and heat treated versions of each glass. X-ray diffraction confirmed that nepheline crystallized in the glass with the lowest nepheline discriminator value, and nepheline may also exist in the second glass as small nanocrystals. The high-B{sub 2}O{sub 3} frit was successful in producing simulated waste glasses with no detectable nepheline crystallization at waste loadings of up to 45 wt%. The melt rate of this frit was also considerably better than other frits with increased concentrations of Na{sub 2}O.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

San Francisco Biofuel Program: Brown Grease to Biodiesel Demonstration (Project Report)

Municipal wastewater treatment facilities have typically been limited to the role of accepting wastewater, treating it to required levels, and disposing of its treatment residuals. However, a new view is emerging which includes wastewater treatment facilities as regional resource recovery centers. This view is a direct result of increasingly stringent regulations, concerns over energy use, carbon footprint, and worldwide depletion of fossil fuel resources. Resources in wastewater include chemical and thermal energy, as well as nutrients, and water. A waste stream such as residual grease, which concentrates in the drainage from restaurants (referred to as Trap Waste), is a good example of a resource with an energy content that can be recovered for beneficial reuse. If left in wastewater, grease accumulates inside of the wastewater collection system and can lead to increased corrosion and pipe blockages that can cause wastewater overflows. Also, grease in wastewater that arrives at the treatment facility can impair the operation of preliminary treatment equipment and is only partly removed in the primary treatment process. In addition, residual grease increases the demand in treatment materials such as oxygen in the secondary treatment process. When disposed of in landfills, grease is likely to undergo anaerobic decay prior to landfill capping, resulting in the atmospheric release of methane, a greenhouse gas (GHG). This research project was therefore conceptualized and implemented by the San Francisco Public Utilities Commission (SFPUC) to test the feasibility of energy recovery from Trap Waste in the form of Biodiesel or Methane gas. The research goals are given below: To validate technology performance; To determine the costs and benefits [including economic, socioeconomic, and GHG emissions reduction] associated with co-locating this type of operation at a municipal wastewater treatment plant (WWTP); To develop a business case or model for replication of the program by other municipal agencies (as applicable). In order to accomplish the goals of the project, the following steps were performed: 1. Operation of a demonstration facility designed to receive 10,000 to 12,000 gallons of raw Trap Waste each day from private Trap Waste hauling companies. The demonstration facility was designed and built by Pacific Biodiesel Technologies (PBTech). The demonstration facility would also recover 300 gallons of Brown Grease per day from the raw Trap Waste. The recovered Brown Grease was expected to contain no more than 2% Moisture, Insolubles, and Unsaponifiables (MIU) combined. 2. Co-digestion of the side streams (generated during the recovery of 300 gallons of Brown Grease from the raw Trap Waste) with wastewater sludge in the WWTP's anaerobic digesters. The effects of the side streams on anaerobic digestion were quantified by comparison with baseline data. 3. Production of 240 gallons per day of ASTM D6751-S15 grade Biodiesel fuel via a Biodiesel conversion demonstration facility, with the use of recovered Brown Grease as a feedstock. The demonstration facility was designed and built by Blackgold Biofuels (BGB). Side streams from this process were also co-digested with wastewater sludge. Bench-scale anaerobic digestion testing was conducted on side streams from both demonstration facilities to determine potential toxicity and/or changes in biogas production in the WWTP anaerobic digester. While there is a lot of theoretical data available on the lab-scale production of Biodiesel from grease Trap Waste, this full-scale demonstration project was one of the first of its kind in the United States. The project's environmental impacts were expected to include: Reduction of greenhouse gas emissions by prevention of the release of methane at landfills. Although the combustion product of Biodiesel and Methane gas produced in the Anaerobic digester, Carbon Dioxide, is also a greenhouse gas; it is 20 times weaker for the same amount (per mole) released, making its discharge preferable to that of Methane. The use of Biodiesel in place of fossil-fuel derived Diesel was expected to reduce net Carbon Dioxide, Ash Particulate, Sulfate, Silicate, and Soot emissions, thereby improving air quality.

09 BIOMASS FUELS↗

An Open, Snow-based Hydrologic System on Noachian Mars

Properties of Noachian valley networks on Mars suggest that the conditions under which they formed were marginal for liquid water formation. The networks are sparsely scattered, poorly dissected, and tend to be small; a majority occupy areas only a few hundred kilometers in extent. Models in which networks formed by mass wasting are contra-indicated by the discovery of channels within the valleys. Greenhouse hypotheses for the stability of liquid water have foundered on familiar problems: first, a very substantial CO2 atmosphere would be required to bring global average conditions to 273 K; the CO2 should still be present in extensive carbonate deposits that have not been detected. Explanations that call upon groundwater sapping are hampered by the need for a hydrologic system to recharge the groundwater system, which effectively reinstates the need for a heavy CO2 atmosphere. Based upon field experience and geomorphic similarities between drainage developed in the periglacial terrain in and around the Haughton impact structure, Devon Island, Nuunavuut, Canada, we have suggested that some of the channel networks may have formed either subglacially, or as ice marginal structures.

Zent, A. P.↗

Functional analysis of human cytochrome P450 21A2 variants involved in congenital adrenal hyperplasia

Cytochrome P450 (P450, CYP) 21A2 is the major steroid 21-hydroxylase, converting progesterone to 11-deoxycorticosterone and 17α-hydroxyprogesterone (17α-OH-progesterone) to 11-deoxycortisol. More than 100 CYP21A2 variants give rise to congenital adrenal hyperplasia (CAH). We previously reported a structure of WT human P450 21A2 with bound progesterone and now present a structure bound to the other substrate (17α-OH-progesterone). We found that the 17α-OH-progesterone- and progesterone-bound complex structures are highly similar, with only some minor differences in surface loop regions. Twelve P450 21A2 variants associated with either salt-wasting or nonclassical forms of CAH were expressed, purified, and analyzed. The catalytic activities of these 12 variants ranged from 0.00009% to 30% of WT P450 21A2 and the extent of heme incorporation from 10% to 95% of the WT. Substrate dissociation constants (K s ) for four variants were 37–13,000-fold higher than for WT P450 21A2. Cytochrome b 5 , which augments several P450 activities, inhibited P450 21A2 activity. Similar to the WT enzyme, high noncompetitive intermolecular kinetic deuterium isotope effects (≥ 5.5) were observed for all six P450 21A2 variants examined for 21-hydroxylation of 21-d3-progesterone, indicating that C–H bond breaking is a rate-limiting step over a 104-fold range of catalytic efficiency. Using UV-visible and CD spectroscopy, we found that P450 21A2 thermal stability assessed in bacterial cells and with purified enzymes differed among salt-wasting- and nonclassical-associated variants, but these differences did not correlate with catalytic activity. Our in-depth investigation of CAH-associated P450 21A2 variants reveals critical insight into the effects of disease-causing mutations on this important enzyme.

59 BASIC BIOLOGICAL SCIENCES↗

Degradation of Poly- and Perfluoroalkyl Substances (PFAS) in Water via High Power, Energy-Efficient Electron Beam Accelerator

The goal of the 2-year workplan was to see if electron beam (EB) could be used to break down a sub-set of the larger chemical family of per and polyfluoroalkylated substances (PFAS) in an energy efficient and economical manner when compared to conventional water treatment technologies. Year one (Y1) work focused on sample EB treatment work in the Fermi National Accelerator Laboratory’s (FNALs) Accelerator Applications Demonstration and Development (A2D2) EB accelerator. While there are reportedly thousands of types of PFAS, for the point of most of the work herein, a small subset was examined, typically perfluorooctane sulfonate (PFOS) and perfluorooctanoate (PFOA). PFOA and PFOS are two of the most well studied PFAS and are studied for baseline evaluations and are considered most useful. The work from Y1 provided information about the optimal operating parameters and additives to use when treating PFOS and PFOA via EB. The data were then used to see where in a water treatment system an EB accelerator would be best suited to treat PFAS. A conventional water treatment technology, GAC, was then compared to e-beam treatment technology with respect to energy and costs for treatment. In year two (Y2), several conventional e-beam accelerator designs, and FNAL’s developmental compact SRF accelerator design, were evaluated for their suitability in PFAS treatment, from an energy efficiency and cost standpoint. Several EB parameters were evaluated and optimized for the removal of PFOA and PFOS from water at normal pressure and temperature, measured as total PFAS removal. Under the optimized test conditions both PFOA showed complete destruction to inorganic fluoride, and PFOS to inorganic fluoride and sulfate, with mass balance. The effect on PFAS removal relative to solution pH, total EB dose, EB dose rate, dissolved oxygen concentration (DO), temperature, and initial PFAS concentration were evaluated. In general, PFOA was easier to destroy than PFOS. Degradation products, typically observed under less-than-optimal EB conditions, provided insight to degradation mechanisms. Products were identified to rule out possible deleterious biproduct formation. The water radiolysis radical reaction kinetics with PFOS and PFOA were not dependent on the initial concentration over 5-orders of magnitude from 2 μg/L to 20 mg/L. This is thought to be because there was an overabundance of the reactive water radiolysis radicals relative to PFAS molecules and largely attributed to aqueous electrons. The reaction rates appeared to be diffusion limited. Testing at higher concentrations (100-200 mg/L) showed a decrease in removal efficiency, suggesting alternative kinetics, possibly second order rates, at higher concentrations. In all, we successfully defined a set of optimal EB parameters to treat PFOA and PFOS at concentrations of 20 mg/L in water with destruction efficiencies near 100%. We further tested the optimized EB parameters with other types of PFAS, including shorter and longer fluorocarbon chain homologs of PFOA and PFOS, and PFAS with alternative functional groups such as sulfonamides. Based on our results EB can be optimized as an effective destructive technology for removing PFAS from water. The conditions optimized for PFOA and PFOS were less effective with ultra-short fluorocarbon compounds like TFMS, PFES, PFPS and PFBS, and likely require re-optimization of parameters to them. In all, it was determined that from a cost and energy efficiency standpoint, EB would be best applied to waste streams with relatively high concentrations of PFOS and PFOA and is not as cost effective as GAC treatment for removing low concentrations of PFAS from water. Higher concentrations of PFAS can be found in the wastewater of conventional treatment processes such as RO and IE and therefore EB may be used to supplement such treatment technologies. Some real-world IE regeneration wash water and RO reject water containing higher concentrations of PFAS and obtained from pilot scale industrial wastewater treatment system at a fluorochemical manufacturing facility, showed that EB could remove PFAS from such types of wastewaters. The IE regenerant wash water appeared to be the most efficient of the two types of wastewaters tested. However, some further optimization of the EB parameters for the specific PFAS types present in those wastewaters may be required. Also, the effects of co-present TOC and mineral salts should be considered during such optimization efforts. From the experimental Y1 results it was seen that the aqueous electron drives degradation of the PFAS. In a hypothetical water treatment skid using EB for PFAS destruction the parameters of the system should be optimized to promote aqueous electron production. Before EB treatment, the PFAS should be preconcentrated when possible, the pH should be raised to pH 10 or higher to enhance aqueous electron production, and the water should be nitrogen purged to remove dissolved oxygen to minimize aqueous electron scavenging. An excel spreadsheet was created that calculates optimal conditions based on inlet PFAS concentration and desired outlet concentration, by optimizing the accelerator power, dose rate, water treatment rate, pH and dissolved oxygen levels to reach the desired endpoint. Given this information on accelerator operating conditions five different EB accelerator systems were compared. One EB system was a continuous-wave, linear superconducting accelerator being designed at Fermilab. Three other EB systems (IMPELA at 5% and 25% duty factor and the ILU-14) were normal conducting pulsed linear accelerators. The fifth system was an IBA Rhodotron which is a normal conducting, circular, continuous-wave accelerator. The accelerator efficiency (% of the incoming power that is used in water treatment) was the dominating factor in accelerator choice. The radio frequency (RF) power supply and the accelerator design (superconducting versus warm technology) drive the accelerator efficiency. The IBA Rhodotron was seen to be the most energy efficient commercially available technology with a wall-plug (total) power efficiency of 43% at 400 kW. The Fermilab design, with a prototype for a different application currently being fabricated, was the most energy efficient at 55% when driven by a Klystron RF power supply and as high as 77% when powered by a magnetron. As the Fermilab design was the most energy efficient by approximately 10-30%, further design work was done on the accelerator and beam delivery system specific to the destruction of PFAS in water. The Fermilab design is unique from industrial accelerators in that is superconducting. Superconducting technology allows for the acceleration of electrons without losses. The accelerator must be cooled to below the point where it is superconducting and is operated around 4 degrees Kelvin. The bulk of the design work for the accelerator is on making the accelerator as energy efficient as possible so that it does not require liquid helium and can be cooled with conduction cooling via cryocoolers. Final design work resulted in an EB accelerator that would operate at minimally 200 kW and 10 MeV. Prototype construction would cost $\$ $7.8 million dollars when driven by a Klystron power supply. A second version of the same accelerator would cost $\$ $5.5 million dollars when driven by a magnetron that is still under development. The commercially available 300 kW IBA Rhodotron cost was estimated at approximately $\$ $9 million. While it is hard to directly compare, an operational GAC system used by 3M for groundwater treatment capital cost (2022 dollars) was estimated to cost $\$ $3.3 million. While the capital expense of the EB accelerator systems was higher than GAC, the accelerator EB treatment would result in destruction of the PFAS and not just sequestration of PFAS to form a new waste stream that requires further treatment or disposal. The operating cost to destroy the PFAS via 400 kw EB system was less than $\$ $1000/kg of PFAS destroyed when treating at a 20 mg/L PFAS concentration, compared to GAC with operating costs that calculated at $\$ $27,530 per kg of PFAS sequestered when treating 100 μg/L PFOA and PFOS combined concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extraction and reductive stripping of pertechnetate from spent nuclear fuel waste streams.

An approach directed at rapid sequestration and disposal of technetium-99 from UREX (uranium extraction) liquid waste streams is presented. This stream is generated during reprocessing of light-water-reactor spent fuel to recycle the actinides and separate fission products for waste disposal. U and Tc are co-extracted from a nitric acid solution using tri-n-butylphosphate in dodecane, so that Tc(VII) is present in the strip solution after the actinide separations. The goal is to separate uranyl from the pertechnetate in this U-Tc stream and then sequester Tc in the metallic form. Our approach is based on reductive stripping of pertechnetate either from aqueous solution (for column extractions) or organic solvents (for liquid-liquid extractions). In both of these methods, metallic zinc in the presence of formic acid serves as a reducing agent, and {sup 99}Tc is recovered as a co-precipitate of Zn(II) hydroxide and hydrous Tc(IV) oxide, with a Zn:Tc ratio between 1:1 and 2:1 mol/mol. This solid residue can be reduced to a Zn-Tc alloy by high temperature (500-700 C) hydrogenation, and the resulting heterophase alloy can be added to a metallic Fe-Zr-Mo waste form that is processed at 1600 C, with subsequent loss of Zn by evaporation. Alternatively, Zn and Tc can be separated and {sup 99}Tc sequestered as NH{sub 4}TcO{sub 4} for further reduction to Tc(0) metal. The aqueous Zn reduction process removes {approx}90% of {sup 99}Tc per cycle. The nonaqueous Zn reduction in 1:1 methanol-formic acid removes 60-70% of {sup 99}Tc per cycle, depending on the extracting agent (such as a tetraalkylammonium nitrate). The extracting agent is recycled in the process. The pertechnetate is extracted from the aqueous phase into 1,2-dichloroethane, which is removed by evaporation and reused. The residue is either calcined and steam reformed to Tc(0) or processed by the nonaqueous Zn reduction method. These methods can be used not only to remove the pertechnetate from the U-Tc product stream, but also to sequester the pertechnetate from aqueous waste streams generated through the processes described in this paper, thereby closing the cycle. The same approaches can be used to close the {sup 99}Tc cycle for other methods that are currently being developed at Los Alamos and Argonne National Laboratories.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Hydrochloric Acid Hydrolysis of Pulps from Oil Palm Empty Fruit Bunches to Produce Cellulose Nanocrystals

Cellulose nanocrystals (CNCs) were successfully isolated by hydrochloric acid hydrolysis followed by ultrasonic homogenization of oil palm empty fruit bunches (OPEFB), which are a major form of agricultural waste in Southeast Asia. Currently sulfuric acid is mainly used in CNC preparation to achieve high dispersibility; however, we demonstrated that CNC suspensions prepared from OPEFB by hydrochloric acid hydrolysis remained stable without any sedimentation over 6 months. The obtained CNCs were fully characterized by elemental analysis, electron microscopic observation, X-ray diffraction measurement, and thermal analysis. The OPEFB-derived CNCs exhibited higher aspect ratios of 23–29 and higher thermal stability of 347–359 °C as maximum degradation temperature, as compared with those of woody CNCs prepared by sulfuric acid hydrolysis (15 and 311 °C, respectively). Although as-prepared CNCs showed comparable morphological and physicochemical properties to those prepared from oil palm biomass by other methods including sulfuric acid hydrolysis, use of hydrochloric acid and ultrasonication for hydrolysis of OPEFB was effective to yield crystalline CNCs with long-term nanodispersibility showing clear birefringence. Graphical Abstract: .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Agro-waste shaped porous Al2O3/Ni composites: Corrosion resistance performance and artificial neural network modelling

Highlights: • Porous Al{sub 2}O{sub 3}/Ni composites were developed with agro-waste pore-forming agents. • The RH and SCB graded composites showed Ni{sub 3}Al{sub 2}SiO{sub 8} and NiAl{sub 2}O{sub 4} spinels respectively. • Superior chemical stability was demonstrated by the Al{sub 2}O{sub 3}-2Ni-RH composite. • The ANN model demonstrated a good performance with R{sup 2} value of approx. 0.99. - Abstract: In the present study, an analysis on the combined effect of nickel (Ni) reinforcement and pore former type in characterizing the corrosion behavior of composite porous alumina ceramics was performed. In order to showcase the potential of the new porous ceramics, pore-forming agents (PFAs) from rice husk (RH) and sugarcane bagasse (SCB) were used in shaping the plain and composite porous alumina samples having sample formulation of Al{sub 2}O{sub 3}-xNi-PFA; x = 0, 2, 4, 6 and 8 wt%. Results showed that the emergence of a highly stable Ni{sub 3}Al{sub 2}SiO{sub 8} spinelloid phase in the RH-graded composites enhanced their chemical stability in the corrosive mediums (10 wt% NaOH and 20 wt% H{sub 2}SO{sub 4}) relative to the plain and the corresponding SCB-graded counterparts. An artificial neural network (ANN) model has been developed for predicting the corrosion behavior of the plain and composite porous alumina ceramics based on the experimental data. The developed ANN model satisfactorily predicted the percent mass losses of the porous ceramics in strong alkali and strong acid solutions with coefficient of determination (R{sup 2}) of approximately 0.99.

36 MATERIALS SCIENCE↗

The zinc ferrite obtained by oxidative precipitation method as a catalyst in n-butanol conversion

This paper presents the results of catalytic properties of n-butanol conversion of the zinc ferrite obtained by oxidative precipitation method. The zinc ferrite showed good dehydrogenating activity but also catalyzed consecutive bimolecular condensation of emerged aldehyde particles into symmetrical ketone. The zinc-iron oxide of spinel structure was prepared from ferrous sulfate, which forms as a waste during the titanium dioxide production. The X-ray diffraction methods (XRD, XRF) were used in determining the structure and composition of obtained zinc ferrite, while thermogravimetry (TG-DTG), and differential thermal analysis (DTA) were used in the study of thermal transformations of zinc spinel in air.

36 MATERIALS SCIENCE↗

Rheinheimera sp . T2C2 Bacterial Biofilm for Bioremediation of Cobalt(II)

Toxic metals, including cobalt, are often the cause of the contamination of rivers and lakes in mining regions. Heavy metal water pollution has been linked to numerous human health problems, prompting the need for environmental remediation. Existing techniques for removing heavy metals from water, such as chemical precipitation and filtration, produce toxic waste, are costly, or require high power consumption for pumping. Biosorption is a potential alternative strategy that is cost-effective and uses readily available and naturally produced biomass and living material to absorb pollutants. Engineering living materials, such as biofilms, which consist of living cells and a secreted polymer matrix, offer the potential to integrate toxin sensing, sequestration, and metabolism capabilities of cells to improve pollution remediation strategies. Alternative biofilm producing candidates need to be explored to implement these material capabilities. Previous biosorption studies have primarily used bacterial biofilms from known pathogens and/or generated toxic waste in the form of the absorbent material combined with the heavy metal. Here, we describe a recently isolated bacterium called Rheinheimera sp. T2C2 that forms biofilms with promising biosorption characteristics. T2C2 is an aquatic bacterium with low nutrient requirements and high biofilm production that is not known to be pathogenic. We demonstrate (1) the efficacy of Rheinheimera sp. T2C2 as a biosorbent for cobalt bioremediation; (2) how biosorption is altered by water conditions to establish the efficacy of this strategy in different environments; and (3) how the metal can be released from the biofilm for metal recycling. Our findings will provide a living materials strategy that overcomes the existing barriers for bioremediation and improves the health of ecosystems and humans through heavy metal removal and recycling.

Rheinheimera↗

Laser-Based Means for Accelerating Nuclear Decay Rate

This project aims to replicate and build upon a reported series of results whereby nuclear decay of unstable species has been accelerated under laser irradiation in the presence of resonantly excited plasmonic nanoparticles. We are currently utilizing a laser system similar to that used within these reports as well as optimizing nanoparticle solution environments in an attempt to replicate reported results or provide alternative pathways that may explain some perceived discrepancies. The current work is being performed with equipment and techniques currently available at SRNL, including nanoparticle synthesis and pulsed lasers for plasmon excitation. The results of these experiments could provide quantitative data that can be used to resolve the discrepancies in the calculations and better estimate the ultimate utility of the process. If verified, this would represent a pathway for using readily available and scalable technology to reduce the long-term radiological storage requirements of certain forms of nuclear waste.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Laser-Based Means for Accelerating Nuclear Decay Rate

This project aims to replicate and build upon a reported series of results whereby nuclear decay of unstable species has been accelerated under laser irradiation in the presence of resonantly excited plasmonic nanoparticles. Most theoretical investigations of this problem do not predict the enhancement to be significant. Further, alternate explanations for the observed decrease in signals associated with the supposedly destroyed species need to be examined. There are potentially substantial benefits from exploiting this effect to reduce the long-term radiological storage requirements of certain forms of nuclear waste. These benefits merit the confirmation or disproving of the effect.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Solid state SPS microwave generation and transmission study. Volume 1: Phase 2

The solid state sandwich concept for Solar Power Station (SPS) was investigated. The design effort concentrated on the spacetenna, but did include some system analysis for parametric comparison reasons. The study specifically included definition and math modeling of basic solid state microwave devices, an initial conceptual subsystems and system design, sidelobe control and system selection, an assessment of selected system concept and parametric solid state microwave power transmission system data relevant to the SPS concept. Although device efficiency was not a goal, the sensitivities to design of this efficiency were parametrically treated. Sidelobe control consisted of various single step tapers, multistep tapers, and Gaussian tapers. A preliminary assessment of a hybrid concept using tubes and solid state is also included. There is a considerable amount of thermal analysis provided with emphasis on sensitivities to waste heat radiator form factor, emissivity, absorptivity, amplifier efficiency, material and junction temperature.

Maynard, O. E.↗