Search NASA⌕ Search

SEARCH · Search NASA

Results for “X ray diffraction analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Synthesis and characterization of Co-Fe Prussian blue nanoparticles within MCM-41

A Prussian blue analogue, K{sub 0.84}Co{sub 1.08}[Fe(CN){sub 6}] is prepared by reaction between [Fe(CN){sub 6}]{sup 3-} in aqueous solution and ion-exchanged Co{sup 2+} in the channels of MCM-41. Powder X-ray diffraction, transmission electron microscopy, thermogravimetric analysis, nitrogen adsorption/desorption isotherms, diffuse reflectance UV-vis absorption spectroscopy and magnetic measurements were employed to characterize the product. The results show that the Prussian blue analogue is in nanoparticles within the channels and the hexagonal phase of MCM-41 remains intact during the reactions. A particle size effect on optical and magnetic properties of the nanoparticles was observed.

36 MATERIALS SCIENCE↗

Temperature dependence of helium-implantation-induced lattice swelling in polycrystalline tungsten: X-ray micro-diffraction and Eigenstrain modelling

Using synchrotron X-ray micro-diffraction and Eigenstrain analysis the distribution of lattice swelling near grain boundaries in helium-implanted polycrystalline tungsten is quantified. Samples heat-treated at up to 1473 K after implantation show less uniform lattice swelling that varies significantly from grain to grain compared to as-implanted samples. An increase in lattice swelling is found in the vicinity of some grain boundaries, even at depths beyond the implanted layer. As a result, these findings are discussed in terms of the evolution of helium-ion-implantation-induced defects.

36 MATERIALS SCIENCE↗

Optimization of permanent magnetic properties in melt spun Co{sub 82−x}Hf{sub 12+x}B{sub 6} (x = 0–4) nanocomposites

Magnetic properties of melt spun Co{sub 82−x}Hf{sub 12+x}B{sub 6} ribbons made with various wheel speeds have been studied. The ribbons with x = 0–1 are not easy to crystallize and thus display soft magnetic behavior even at wheel speed of 10 m/s. In contrast, the ribbons with x = 1.5–4 at optimized wheel speed exhibit good permanent magnetic properties of B{sub r} = 0.41–0.59 T, {sub i}H{sub c} = 120–400 kA/m, and (BH){sub max} = 10.6–48.1 kJ/m{sup 3}. The optimal magnetic properties of B{sub r} = 0.59 T, {sub i}H{sub c} = 384 kA/m, and (BH){sub max} = 48.1 kJ/m{sup 3} are achieved for Co{sub 80}Hf{sub 14}B{sub 6} ribbons at wheel speed of 30 m/s. X-ray diffraction, thermo-magnetic analysis, and transmission electron microscopy results show that good hard magnetic properties of Co{sub 82−x}Hf{sub 12+x}B{sub 6} ribbons (x = 2–4) are originated from the Co{sub 11}Hf{sub 2} phase well coupled with the Co phase. The change of magnetic properties for Co{sub 82−x}Hf{sub 12+x}B{sub 6} ribbons spun at various wheel speeds is correlated to microstructure and phase constitution. The strong exchange-coupling effect between magnetic grains for the ribbons with x = 2–3 at wheel speed = 30 m/s leads to remarkable permanent magnetic properties. The presented results suggest that the optimized Co{sub 82−x}Hf{sub 12+x}B{sub 6} (x = 2–3) ribbons are much suitable than others (x = 0–1.5 and 4) for making rare earth and Pt-free magnets.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

One-dimensional SnF{sub 2} single crystals in the inner channels of single-wall carbon nanotubes: I. Preparation and basic characterization

One-dimensional (1D) SnF{sub 2} single crystals have been obtained by crystallization from melt in the inner channels of single-wall carbon nanotubes (SWCNTs). SWCNTs with an inner diameter of 1.02-1.4 nm, synthesized by electric-arc discharge and chemically purified, were used for incorporation. The synthesized 1D SnF{sub 2} single crystal-SWCNT composites are basically characterized by X-ray diffraction, energy-dispersive analysis, electron microscopy, and chemical analysis. The characteristic motifs of tin cation distribution in the SWCNT inner channel confirm the formation of SnF{sub 2} single crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Inorganic-organic hybrid semiconductor nanomaterials: (ZnSe)(N{sub 2}H{sub 4}){sub x}(C{sub 5}H{sub 5}N){sub y}

In this paper, inorganic-organic hybrid semiconductor (ZnSe)(N{sub 2}H{sub 4}){sub x}(C{sub 5}H{sub 5}N){sub y} nanosheets as well as (ZnSe)(C{sub 5}H{sub 5}N){sub y} nanoparticles were first synthesized by a solvothermal method in a ternary solution and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectra, ultraviolet-visible (UV-vis) absorption spectra, thermogravimetric analysis (TGA), differential scanning calorimeter (DSC) and photoluminescence (PL) spectra. The results indicated that the morphology and composition of the products were largely influenced by the reaction temperature and the volume ratio of water. When the reaction temperature and the water content were lower, (ZnSe)(N{sub 2}H{sub 4}){sub x}(C{sub 5}H{sub 5}N){sub y} nanosheets were formed. As the reaction temperature or the content of water was high enough, (ZnSe)(C{sub 5}H{sub 5}N){sub y} nanoparticles were formed. Pure hexagonal wurtzite ZnSe nanosheets or zinc blende ZnSe nanoparticles were obtained by extracting the corresponding hybrids. The bandgap absorption of ZnSe nanocrystals blue shifted in comparison with the bulk. The photoluminescent intensity of (ZnSe)(N{sub 2}H{sub 4}){sub x}(C{sub 5}H{sub 5}N){sub y} nanosheets was much stronger than that of (ZnSe)(C{sub 5}H{sub 5}N){sub y} nanoparticles.

36 MATERIALS SCIENCE↗

DIALS : implementation and evaluation of a new integration package

The DIALS project is a collaboration between Diamond Light Source, Lawrence Berkeley National Laboratory and CCP4 to develop a new software suite for the analysis of crystallographic X-ray diffraction data, initially encompassing spot finding, indexing, refinement and integration. The design, core algorithms and structure of the software are introduced, alongside results from the analysis of data from biological and chemical crystallography experiments.

59 BASIC BIOLOGICAL SCIENCES↗

Multiscale structural analysis of polymorphic phase boundaries in doped antiferroelectric sodium niobate

In the current work, we have performed multiscale structural analysis of a Pb-free sodium niobate-based smart system, i.e., 0.9⁢NaNbO 3 –0.1⁢Ba 0.9 ⁢Ca 0.1 ⁢TiO 3 (NN-10BCT) reported earlier for its high ferroelectric response. We have investigated the temperature-dependent evolution of crystal structure at long, medium, and short ranges using synchrotron x-ray diffraction (SXRD), Raman scattering, and pair distribution function(PDF) techniques in conjunction with dielectric studies. Temperature-dependent synchrotron x-ray diffraction data combined with dielectric analysis suggest two unique polymorphic phase boundaries (PPB) with two coexisting ferroelectric phases stable in the wide temperature ranges. These PPBs are stable in different regions viz. (i) cryogenic temperatures with coexisting R3c and Pmc⁢2 1 phases (ii) vicinity of room temperatures with coexisting Pmc⁢2 1 and Amm2 phases. In contrast to the conclusions drawn from SXRD, PDF reveals structures having lower symmetry (with coexisting Cc+ Pmc2 1 phases at 1.7 ≤r≤ 20 Å) at short ranges for these PPBs. In conclusion, the presence of different long- and short-range symmetries (accommodating tilt-oriented ferroelectric phases) in the unique polymorphic phase boundaries makes them thermally stable and advantageous for technological applications.

36 MATERIALS SCIENCE↗

A new LiNbO{sub 3}-type polar oxide with closed-shell cations: ZnPbO{sub 3}

A new lithium-niobate (LiNbO{sub 3})-type polar compound, namely, ZnPbO{sub 3} (a = 5.41605(7) Å and c = 14.33151(3) Å), with closed-shell ions only was synthesized under high pressure and high temperature (8 GPa and 1273 K). A point-charge-model calculation based on atomic positions refined by Rietveld analysis of synchrotron X-ray diffraction data gave an electrical ionic polarization of 77 μC/cm{sup 2} along the hexagonal c-axis. Detailed structural analysis indicated that the contribution of Pb{sup 4+} in ZnPbO{sub 3} to the polarization was almost twice as large as that of Sn{sup 4+} in ZnSnO{sub 3}. Transport measurement showed metallic behavior of ZnPbO{sub 3} from room temperature to low temperature despite the fact that both cations are closed-shell ions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cementitious Grouts for ILW Encapsulation - Hydration and Continuity of Supply within the UK - 16184

In the UK the preferred route to disposal for the majority of intermediate level nuclear waste (ILW) streams is encapsulation within a cementitious matrix, accounting for 83% of waste conditioned to date (NDA, 2013). The method is well-defined and produces a waste package that is both chemically and physically stable, providing a multi-layered barrier to the release of the waste species contained within. Due to the process of treatment, facilitated via remote operation, it is necessary for the grouting matrices to meet strict performance limits in terms of their flow, setting time and avoidance of the formation of bleed water or segregation. To this end, the limits on composition of the anhydrous materials (a mixture of ordinary Portland cement [OPC] and blast furnace slag [BFS]) are tight to ensure conformity. Whilst these limits on composition are well understood, their impact upon grout hydration, and hence performance, is poorly defined. This study investigates the effects of modifying the physical and chemical composition of both the OPC and the BFS components of the matrix in order to identify the sensitivity or otherwise of the system to ensure that a continuity of supply is maintained. A number of techniques, scanning electron microscopy - image analysis (SEM-IA), chemical shrinkage (measured via dilatometry), isothermal conduction calorimetry (ICC), thermogravimetric analysis (TGA) and X-ray diffraction (XRD), have been applied to assess the rate and degree of hydration (DoH) of a range of grouts prepared with OPC and BFS with a range of chemical and physical compositions. This has been coupled with subsequent engineering performance testing, with additional analysis to understand the impact of a fire scenario within a storage or disposal facility, to provide an indication towards the resilience of the waste packages to a potential catastrophic event. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Polymerization of aniline in the interlayer space of molybdenum trioxide and its electrochemical properties

Molybdenum trioxide/polyaniline (MoO{sub 3}/PANI) composite was prepared first by ion-exchange reaction between aniline (ANI) and dodecylamine (DDA) which was intercalated precursor, and then was formed under the polymerization of ANI within the interlayer space of MoO{sub 3} at 120 deg. C for 3 d in air. According to powder X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, infrared spectroscopy and electrochemical testing, MoO{sub 3}/PANI composite has layered structure, and its interlayer spacing is 1.127 nm. Moreover, it has high thermal stability with the compound and completes its weight loss at 751.9 deg. C. Electrochemical investigation shows that MoO{sub 3} is the major active substance in the MoO{sub 3}/PANI electrode, and MoO{sub 3}/PANI electrode demonstrates better conductivity and electrochemical activity than pure MoO{sub 3} electrode, attributed to the promotion of Li{sup +} and/or electron transport. In addition, the alternating current impedance proves that if the resistance of MoO{sub 3}/PANI electrode reduces apparently, the electrochemical activity will increase correspondingly, the same as the relationship between the ohmic resistance and the electrical conductivity. - Graphical abstract: Aniline (ANI) monomer was intercalated into the interlayer space of molybdenum trioxide (MoO{sub 3}) and heat-treated at 120 deg. C for 3 d in air, and then polymerized to form layered structure of molybdenum trioxide/polyaniline (MoO{sub 3}/PANI) composite. Its interlayer spacing of MoO{sub 3}/PANI composite is 1.127 nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Grafted chromium 13-membered dioxo-macrocyclic complex into aminopropyl-based nanoporous SBA-15

In a new approach, chromium (III) tetraaza dioxo ligand was grafted onto functionalized SBA-15 after four step reactions by using coordinating ability of anchored amino functionalized SBA-15. After the termination of each step, the obtained product was characterized by FT-IR, low-angle X-ray diffraction (LA-XRD), N{sub 2} adsorption–desorption isotherms (Brunauer–Emmett–Teller (BET)–Barret–Joyner–Halenda (BJH)) and thermogravimetric analysis (TGA), and used as catalyst for the efficient and regioselective alcoholysis of styrene oxide to 2-alkoxy-1-phenylethanol product at ambient temperature. - Graphical abstract: Chromium (III) tetraaza dioxo ligand was grafted onto functionalized SBA-15 using coordinating ability of anchored amino functionalized SBA-15. Preparation of the catalyst is depicted in Scheme 1. - Highlights: • Dioxo tetraazachromium macrocyclic complex grafted into the SBA-15-NH{sub 2} channels. • The bond is created by coordinating ability of anchored amino functionalized SBA-15. • The prepared nanocatalyst has superior activity in the alcoholysis of styrene oxide. • The catalyst is reusable at ambient temperature for the mentioned reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Luminescence Properties of Eu{sup 3+}-Doped K{sub 1–} {sub x}Mg{sub 1–} {sub x}Sc(Lu){sub 1+} {sub x}(MoO{sub 4}){sub 3} (0 ≤ x ≤ 0.5) Solid Solutions

K{sub 1–x}Mg{sub 1–} {sub x}Sc(Lu){sub 1+} {sub x}(MoO{sub 4}){sub 3} (0 ≤ x ≤ 0.5) solid solutions have been prepared by solid-state reactions. The synthesized phases of variable composition have been characterized by X-ray diffraction and differential thermal analysis, and their luminescence excitation and luminescence spectra have been obtained. We have measured their spectroscopic and luminescent characteristics (luminescence excitation spectra, short- and long-lived photoluminescence spectra, and long-lived emission lifetime).

36 MATERIALS SCIENCE↗

Self-assembled light lanthanide oxalate architecture with controlled morphology, characterization, growing mechanism and optical property

Highlights: {yields} Flower-like Sm{sub 2}(C{sub 2}O{sub 4}){sub 3}.10H{sub 2}O was gained with Na{sub 3}Cit assisted precipitation method. {yields} The mechanism of the flower-like Sm{sub 2}(C{sub 2}O{sub 4}){sub 3}.10H{sub 2}O formation was proposed. {yields} The Sm{sub 2}(C{sub 2}O{sub 4}){sub 3}.10H{sub 2}O and Sm{sub 2}O{sub 3} samples exhibited obviously different PL spectra. {yields} Ln{sub 2}(C{sub 2}O{sub 4}){sub 3}.nH{sub 2}O (Ln = Gd, Dy, Lu, Y) also were achieved by the simple method. -- Abstract: Flower-like Sm{sub 2}(C{sub 2}O{sub 4}){sub 3}.10H{sub 2}O had been synthesized by a facile complex agent assisted precipitation method. The flower-like Sm{sub 2}(C{sub 2}O{sub 4}){sub 3}.10H{sub 2}O was characterized by X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, field-emission scanning electron microscopy, thermogravimetry-differential thermal analysis and photoluminescence. The possible growth mechanism of the flower-like Sm{sub 2}(C{sub 2}O{sub 4}){sub 3}.10H{sub 2}O was proposed. To extend this method, other Ln{sub 2}(C{sub 2}O{sub 4}){sub 3}.nH{sub 2}O (Ln = Gd, Dy, Lu, Y) with different morphologies also had been prepared by adjusting different rare earth precursors. Further studies revealed that besides the reaction conditions and the additive amount of complex agents, the morphologies of the as-synthesised lanthanide oxalates were also determined by the rare earth ions. The Sm{sub 2}(C{sub 2}O{sub 4}){sub 3}.10H{sub 2}O and Sm{sub 2}O{sub 3} samples exhibited different photoluminescence spectra, which was relevant to Sm{sup 3+} energy level structure of 4f electrons. The method may be applied in the synthesis of other lanthanide compounds, and the work could explore the potential optical materials.

36 MATERIALS SCIENCE↗

Thermal decomposition of neptunyl ammonium nitrate: mechanistic insights and structural characterization of the Np 2 O 5 intermediate phase

Neptunium (Np) possesses a rich and unique chemistry that often diverges from other actinide elements yet remains relatively underexplored compared with the other light actinides. A resurgence of interest in Np has been spurred by the application of 237 Np for plutonium-238 ( 238 Pu) production for use in radioisotope thermoelectric generators (RTGs), necessitating evaluation of Np chemical reactions and materials. The work presented here studied the thermal decomposition of neptunyl ammonium nitrate (NH 4 Np VI O 2 (NO 3 ) 3 ) for synthesis of neptunium dioxide (NpO 2 ), which is the target material used for production of 238 Pu. Additionally, structural characterization of the intermediate solid Np pentoxide (Np 2 O 5 ) was performed. Advanced solid-state characterization techniques, including simultaneous thermal analysis (STA), powder X-ray diffraction (pXRD), Raman spectroscopy, and density functional theory (DFT) modeling have been combined to study the reaction pathways. Analysis revealed that NH 4 Np VI O 2 (NO 3 ) 3 thermally decomposes to a proposed neptunyl nitrate intermediate, followed by Np 2 O 5 and finally NpO 2 , all within the temperature range of 150 °C–600 °C. Further characterization of the pentoxide intermediate provided the first Raman spectra of pure-phase Np 2 O 5 and associated DFT modeling confirmed Raman peak assignments for this phase. These findings provide mechanistic information to advance production of the critical radioisotope 238 Pu and advance the state of knowledge on Np materials chemistry using modern characterization techniques.

Lawson, Kathryn M. [Oak Ridge National Laboratory ↗

Thermal Analysis of High Entropy Rare Earth Oxides

Phase transformations in multicomponent rare earth sesquioxides were studied by splat quenching from the melt, high temperature differential thermal analysis and synchrotron X-ray diffraction on laser-heated samples. Three compositions were prepared by the solution combustion method: (La,Sm,Dy,Er,RE) 2 O 3 , where all oxides are in equimolar ratios and RE is Nd or Gd or Y. After annealing at 800 °C, all powders contained mainly a phase of C-type bixbyite structure. After laser melting, all samples were quenched in a single-phase monoclinic B-type structure. Thermal analysis indicated three reversible phase transitions in the range 1900–2400 °C, assigned as transformations into A, H, and X rare earth sesquioxides structure types. Unit cell volumes and volume changes on C-B, B-A, and H-X transformations were measured by X-ray diffraction and consistent with the trend in pure rare earth sesquioxides. The formation of single-phase solid solutions was predicted by Calphad calculations. The melting point was determined for the (La,Sm,Dy,Er,Nd) 2 O 3 sample as 2456 ± 12 °C, which is higher than for any of constituent oxides. An increase in melting temperature is probably related to nonideal mixing in the solid and/or the melt and prompts future investigation of the liquidus surface in Sm 2 O 3 -Dy 2 O 3 , Sm 2 O 3 -Er 2 O 3 , and Dy 2 O 3 -Er 2 O 3 systems.

36 MATERIALS SCIENCE↗

Bragg glass signatures in Pd x ErTe 3 with X-ray diffraction temperature clustering

The Bragg glass phase is a nearly perfect crystal with glassy features predicted to occur in vortex lattices and charge-density-wave systems in the presence of disorder. Detecting it has been challenging, despite its sharp theoretical definition in terms of diverging correlation lengths. Here we present bulk probe evidence supporting a Bragg glass phase in the systematically disordered charge-density-wave material of Pd x ErTe 3 . We do this by using comprehensive X-ray data and a machine-learning-based analysis tool called X-ray diffraction temperature clustering (X-TEC). We establish a diverging correlation length in samples with moderate intercalation over a wide temperature range. To enable this analysis, we introduced a high-throughput measure of inverse correlation length that we call peak spread. The detection of Bragg glass order and the resulting phase diagram advance our understanding of the complex interplay between disorder and fluctuations. Moreover, the use of our analysis technique to target fluctuations through a high-throughput measure of peak spread can revolutionize the study of fluctuations in scattering experiments.

36 MATERIALS SCIENCE↗

Synthesis, structural and electrical characterizations of DySr{sub 5}Ni{sub 2.4}Cu{sub 0.6}O{sub 12-{delta}}

A new compound DySr{sub 5}Ni{sub 2.4}Cu{sub 0.6}O{sub 12-{delta}} has been prepared by sol gel method and annealed at 1473 K in 1 atm of Ar gas flow. The X-ray diffraction (XRD) is used for phase identification. The sample shows to adopt the K{sub 2}NiF{sub 4}-type structure based on tolerance factor calculation. XRD analysis using the Rietveld method was carried out and it was found that DySr{sub 5}Ni{sub 2.4}Cu{sub 0.6}O{sub 12-{delta}} (Dy{sub 0.33}Sr{sub 1.67}Ni{sub 0.8}Cu{sub 0.2}O{sub 4-{delta}}') compound crystallizes in tetragonal symmetry with space group I4/mmm (Z=2). The lattice parameters are found to be at room temperature a=3.7696(5) A and c=12.3747(2) A. The final reliability indices were: R{sub B}=5.219% and {chi}{sup 2}=3.47. Four probe electrical resistivity measurements were performed versus temperature in the range 294-579 K. A semiconducting behaviour over the whole range of temperature, with a conductivity maximum of 0.4 S cm{sup -1} is observed at 510 K. - Graphical abstract: DySr{sub 5}Ni{sub 2.4}Cu{sub 0.6}O{sub 12-{delta}} exhibits a semi-conducting behaviour over the whole temperature range 294-579 K with a conductivity maximum of 0.4 S cm{sup -1} at 510 K. Highlights: > We described our attempts to synthesize the pure compound DySr{sub 5}Ni{sub 2.4}Cu{sub 0.6}O{sub 12-{delta}}. > Product was characterized by XRD and electrical resistivity measurements. > Iodometric titration was used for the analysis of the oxygen nonstoichiometry. > Calculated tolerance factor was included in the tetragonal symmetry stability range. > Compound exhibits a semi-conducting behaviour over the whole temperature range 294-579 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polystyrene/MoS{sub 2}@oleylamine nanocomposites

The effects of adding different concentrations of MoS{sub 2}@oleylamine nano particles on the thermal and mechanical properties of polystyrene (PS) nanocomposites have been investigated. X-ray diffraction and optical microscopy were used to characterize the morphology of the resulting nanocomposites. The thermal stability of the nanocomposites has been characterized by thermogravimetric analysis. It has been found that the MoS{sub 2}@oleylamine nanoparticles have a good compatibility with the PS matrix forming homogeneous dispersion even at high concentrations. The PS/MoS{sub 2}@oleylamine nanocomposites showed enhanced thermal stability in comparison with neat polystyrene.

77 NANOSCIENCE AND NANOTECHNOLOGY↗