Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomic patterning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Effect of the Milling Conditions on the Properties of ZnO Doped with Fe

(Zn{sub 0.9}Fe{sub 0.1})O powders were produced with different ball to powder weight ratios (BPR) by ball milling of ZnO and Fe elemental powders. The BPR used were 15:1, 20:1, 25:1, and 30:1. The prepared samples were studied by x-ray diffraction (XRD), vibrating sample magnetometer (VSM), and Mössbauer spectroscopy (MS). The XRD patterns showed a zinc oxide (ZnO) single phase with wurtzite structure, except for the 15:1 ratio, which exhibits an additionally bcc structure associated to α-Fe. The mean crystallite sizes were found to be around 100 Å. The Mössbauer spectra were fitted using two doublets, associated to the incorporation of Fe ions into the ZnO lattice, which correspond to the Fe{sup 3+} and Fe{sup 2+} oxidation states except for the 15:1 ratio, for which an additional sextet was necessary to obtain a good fit, this sextet was associated to segregated Fe into the sample. The increase of the BPR allowed that all Fe penetrated into the ZnO matrix. The magnetization measurement using VSM reveals that the system exhibits ferromagnetic behavior at room temperature. For sample with BPR 15:1, the ferromagnetism is due to the segregated Fe, and for higher BPRs, from 20:1 up to 30:1, we propose that their ferromagnetism is due to the percolation of polarons. These polarons appear due to the oxygen vacancies (detected by XRD) which are occupied by electrons, which appear in the charge balance. Exchange interaction between the electron spins located in the vacancies or holes and those of the magnetic impurities (Fe atoms) leads to the formation of bound magnetic polarons, which percolate, producing in this way magnetic behavior.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modelling chemical degradation of concrete during leaching with rain and soil water types

Percolation of external water through concrete results in the degradation of cement and changes the concrete pore water and solid phase composition. The assessment of long-term degradation of concrete is possible by means of model simulation. This paper describes simulations of chemical degradation of cement for different types of rain and soil water at an ambient earth surface temperature (10 {sup o}C). Rain and soil water types were derived using generic equations and measurement of atmospheric boundary conditions representative for North-Belgium. An up-to-date and consistent thermodynamic model is used to calculate the geochemical changes during chemical degradation of the concrete. A general pattern of four degradation stages was simulated with the third stage being the geochemically most complex stage involving reactions with calcium-silicate hydrates, AFm and AFt phases. Whereas the sequence of the dissolution reactions was relatively insensitive to the composition of the percolating water, the duration of the different reactions depends strongly on the percolating water composition. Major identified factors influencing the velocity of cement degradation are the effect of dry deposition and biological activity increasing the partial pressure of CO{sub 2(g)} in the soil air phase (and thus increasing the inorganic carbon content in the percolating water). Soil weathering processes have only a minor impact, at least for the relatively inert sandy material considered in this study.

36 MATERIALS SCIENCE↗

Damage Evolution in GaN Under MeV Heavy Ion Implantation

Damage evaluation processes in patterned GaN implanted by 3 MeV Au2+ ions were investigated as function of ion fluences and annealing temperatures. Surface swelling was observed by using AFM and the results showed that the swelling height depends on ion fluence and annealing temperature. A four-stage of implantatation-induced damage evolution, including point defects, defect clustering, disordering or amorphization and even decomposition, was found and was contributed to defect formation, accumulation and N bubble formation induced at different level of dpa. Crater-like holes were observed on the surface of GaN implanted at the ion fluence of 2×1016 cm-2, and it is considered as an evidence of N loss and broken bubbles formed during implantation.

74 ATOMIC AND MOLECULAR PHYSICS↗

Top-Down Analysis of Proteins in Low Charge States

The impact of charging methods on the dissociation behavior of intact proteins in low charge states is investigated using HCD and 193 nm UVPD. Low charge states are produced for seven different proteins using the following four different methods: (1) proton transfer reactions of ions in high charge states generated from conventional denaturing solutions; (2) ESI of proteins in solutions of high ionic strength to enhance retention of folded native-like conformations; (3) ESI of proteins in high pH solutions to limit protonation; and (4) ESI of carbamylated proteins. Comparison of sequence coverages, degree of preferential cleavages, and types and distribution of fragment ions reveals a number of differences in the fragmentation patterns depending on the method used to generate the ions. More notable differences in these metrics are observed upon HCD than upon UVPD. The fragmentation caused by HCD is influenced more significantly by the presence/absence of mobile protons, a factor that modulates the degree of preferential cleavages and net sequence coverages. Carbamylation of the lysines and the N-terminus of the proteins alters the proton mobility by reducing the number of proton-sequestering, highly basic sites as evidenced by decreased preferential fragmentation C-terminal to Asp or N-terminal to Pro upon HCD. UVPD is less dependent on the method used to generate the low charge states and favors non-specific fragmentation, an outcome which is important for obtaining high sequence coverage of intact proteins. .

74 ATOMIC AND MOLECULAR PHYSICS↗

ESCAPING PARTICLE FLUXES IN THE ATMOSPHERES OF CLOSE-IN EXOPLANETS. II. REDUCED MASS-LOSS RATES AND ANISOTROPIC WINDS

In Paper I, we presented a one-dimensional hydrodynamic model for the winds of close-in exoplanets. However, close-in exoplanets are tidally locked and irradiated only on the day sides by their host stars. This requires two-dimensional hydrodynamic models with self-consistent radiative transfer calculations. In this paper, for the tidal-locking (two-dimensional radiative transfer) and non-tidal-locking cases (one-dimensional radiative transfer), we constructed a multi-fluid two-dimensional hydrodynamic model with detailed radiative transfer to depict the escape of particles. We found that the tidal forces (the sum of tidal gravity of the star and centrifugal force due to the planetary rotation) supply significant accelerations and result in anisotropic winds. An important effect of the tidal forces is that it severely depresses the outflow of particles near the polar regions where the density and the radial velocity are a factor of a few (ten) smaller than those of the low-latitude regions. As a consequence, most particles escape the surface of the planet from the regions of low latitude. Comparing the tidal-locking and non-tidal-locking cases, we found that their optical depths are very different so that the flows also emerge with a different pattern. In the case of non-tidal locking, the radial velocities at the base of the wind are higher than the meridional velocities. However, in the case of tidal locking, the meridional velocities dominate the flow at the base of the wind, and they can effectively transfer mass and energy from the day sides to the night sides. Further, we also found that the differences of the winds show a middle extent at large radii. This means that the structure of the wind at the base can be changed by the two-dimensional radiative transfer due to large optical depths, but the extent is reduced with an increase in radius. Because the escape is depressed in the polar regions, the mass-loss rate predicted by the non-tidal-locking model, in the order of magnitude of 10{sup 10} g s{sup -1}, is a factor of two lower than that predicted by the one-dimensional hydrodynamic model. The results of tidal locking show that the mass-loss rate is decreased an order of magnitude, only 4.3 Multiplication-Sign 10{sup 9} g s{sup -1}, due to large optical depths on the night side. We also found that the distributions of hydrogen atoms show clear variations from the day side to the night side, thus the origin of the excess absorption in Ly{alpha} should be reexamined using multi-dimensional hydrodynamic models.

79 ASTRONOMY AND ASTROPHYSICS↗

Three-dimensional mapping of multiple filament arrays

We study experimentally and numerically the spatiotemporal dynamics of the multiple filament arrays excited by self-focusing of intense elliptical laser beams in fused silica. Our results demonstrate that although multiple filament arrays emerge as apparently regular patterns in the space domain, the spatiotemporal dynamics of the individual filaments is governed by the input-beam power and the input-beam ellipticity. In the case of moderate input-beam ellipticity, the individual filaments propagate in curved trajectories arising from skewed (spatiotemporal) coherence. The spatiotemporal propagation dynamics is regularized by increasing the input-beam ellipticity, and in part due to permanent modifications of fused silica that occur under intense irradiation. In this case, strong pulse reshaping and shock-front generation are observed, which yields a regular array of very short (<5 fs) superluminally propagating localized peaks in the leading front, followed by the subpulses centered on the input-pulse top, and trailed by subluminally propagating pulses with rather complex transverse intensity distribution.

74 ATOMIC AND MOLECULAR PHYSICS↗

Wavelength-scale deformed microdisk lasers

We investigate lasing and output directionality of limacon-shaped microdisk lasers of dimensions comparable to the emission wavelength. The far-field patterns are shown to differ between lasing modes, unlike in large cavities where lasing modes exhibit universal emission directionality determined by chaotic ray dynamics. Unidirectional emission is obtained for certain modes in the wavelength-scale cavities. It results from weak coupling of nearly isotropic high-quality resonances to anisotropic low-quality resonances, combined with chiral symmetry breaking of clockwise and counterclockwise propagating waves. The latter is described by an extended ray dynamics which includes the Goos-Haenchen shift and the Fresnel filtering. Mode hybridization and wave effects in open cavities make it possible to control the output properties of individual lasing modes in wavelength-scale lasers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mapping structural heterogeneity at the nanoscale with scanning nano-structure electron microscopy (SNEM)

Here, in this work, we explore the use of scanning electron diffraction (also known as 4D-STEM) coupled with electron atomic pair distribution function analysis (ePDF) to understand the local order (structure and chemistry) as a function of position in a complex multicomponent system, a hot rolled, Ni-encapsulated, Zr 65 Cu 17.5 Ni 10 Al 7.5 bulk metallic glass (BMG), with a spatial resolution of 3 nm. We show that it is possible to gain insight into the chemistry and chemical clustering/ordering tendency in different regions of the sample, including in the vicinity of nano-scale crystallites that are identified from virtual dark field images and in heavily deformed regions at the edge of the BMG. In addition to simpler analysis, unsupervised machine learning was used to extract partial PDFs from the material, modeled as a quasi-binary alloy, and map them in space. These maps allowed key insights not only into the local average composition, as validated by EELS, but also a unique insight into chemical short-range ordering tendencies in different regions of the sample during formation. The experiments are straightforward and rapid and, unlike spectroscopic measurements, don’t require energy filters on the instrument. We spatially map different quantities of interest (QoI’s), defined as scalars that can be computed directly from positions and widths of ePDF peaks or parameters refined from fits to the patterns. We developed a flexible and rapid data reduction and analysis software framework that allows experimenters to rapidly explore images of the sample on the basis of different QoI’s. The power and flexibility of this approach are explored and described in detail. Because of the fact that we are getting spatially resolved images of the nanoscale structure obtained from ePDFs we call this approach scanning nano-structure electron microscopy (SNEM), and we believe that it will be powerful and useful extension of current 4D-STEM methods.

36 MATERIALS SCIENCE↗

Direct structural retrieval from gas-phase ultrafast diffraction data using a genetic algorithm

Ultrafast scattering techniques such as ultrafast electron diffraction and ultrafast x-ray diffraction have been utilized to elucidate the structural dynamics, reaction intermediates, and final products in molecular reactions following photoexcitation. The time-dependent structures are typically not directly retrieved from the experimental data, but they rely on comparison with calculations. The genetic algorithm (GA), a global optimization strategy, can be used to retrieve the molecular structures directly from diffraction patterns without any theoretical input. However, the robustness of the GA with respect to real experimental conditions such as a limited momentum transfer range, noise, and artifacts has not been studied in detail. In this work, we characterize the performance of the GA with simulated data that mimic realistic experimental conditions. We have developed and implemented a variant of the GA specific to diffraction measurements which performs better in the presence of imperfect data compared to the standard implementation of the GA. We demonstrate this method with both synthetic data and experimental ultrafast electron diffraction data on the UV-induced photodissociation of trifluoroiodomethane (C⁢F 3⁡ I) molecules.

74 ATOMIC AND MOLECULAR PHYSICS↗

Molecular high-order harmonic generation with more than one active orbital: Quantum interference effects

We investigate quantum interference effects in high-order harmonic generation in N{sub 2} and N{sub 2}{sup +} beyond the single-active-orbital approximation, with particular emphasis on the role of {sigma} and {pi} orbitals in the overall spectra. In the former case, we consider a simplified multielectron wave function which incorporates the 3{sigma}{sub g} and 1{pi}{sub u} orbitals, and, in the latter, we assume that the optically active electron is in a coherent superposition of the 3{sigma}{sub g} and 1{pi}{sub g}{sup *} one-electron states. If the orbitals are energetically close, such as the 3{sigma}{sub g} and the 1{pi}{sub u} orbitals of N{sub 2}, we show that the quantum interference patterns observed in the high-order harmonic spectra are predominantly determined by the 3{sigma}{sub g} orbital. If, on the other hand, there is a significant difference in their binding energies, such as for the 3{sigma}{sub g} and the 1{pi}{sub g}{sup *} orbitals of N{sub 2}{sup +}, the most loosely bound orbital will determine the shape of the spectra. Due, however, to the different cutoffs encountered, the more deeply bound orbital will leave an imprint on the high-energy harmonics. This holds both for the situation in which the dynamics of the electron is restricted to the plane p{sub x}p{sub z} and for the full three-dimensional case, if the azimuthal angle is integrated over and the degeneracy of the {pi} orbitals is taken into account.

74 ATOMIC AND MOLECULAR PHYSICS↗

Evolution of Interatomic and Intermolecular Interactions and Polymorphism of Melamine at High Pressure

Melamine (C3H6N6; 1,3,5-triazine-2,4,6-triamine) is an aromatic substituted s-triazine, with carbon and nitrogen atoms forming the ring body, and amino groups bonded to each carbon. Melamine is widely used to produce laminate products, adhesives, and flame retardants, but is also similar chemically and structurally to many energetic materials, including TATB (2,4,6-triamino-1,3,5- trinitrobenzene) and RDX (1,3,5-trinitroperhydro-1,3,5-triazine). Additionally, melamine may be a precursor in the synthesis of superhard carbon-nitrides, such as β-C3N4. In the crystalline state melamine forms corrugated sheets of individual molecules, which are stacked on top of one another, and linked by intra- and inter-plane N-H hydrogen bonds. Several previous high-pressure X-ray diffraction and Raman spectroscopy studies have claimed that melamine undergoes two or more phase transformations below 25 GPa. Our results show no indication of previously reported low pressure polymorphism up to approximately 30 GPa. High-pressure crystal structure refinements demonstrate that the individual molecular units of melamine are remarkably rigid, and their geometry changes very little despite volume decrease by almost a factor of two at 30 GPa and major re-arrangements of the intermolecular interactions, as seen through the Hirshfeld surface analysis. A symmetry change from monoclinic to triclinic, indicated by both dramatic changes in diffraction pattern, as well as discontinuities in the vibration mode behavior, was observed above approximately 36 GPa in helium and 30 GPa in neon pressure media. Examination of the hydrogen bonding behavior in melamine’s structure will allow its improved utilization as a chemical feedstock and analog for related energetic compounds.

Shelton, Hannah (ORCID:0000000218931730)↗

Femtosecond time-resolved MeV electron diffraction

We report the experimental demonstration of femtosecond electron diffraction using high-brightness MeV electron beams. High-quality, single-shot electron diffraction patterns for both polycrystalline aluminum and single-crystal 1T-TaS 2 are obtained utilizing a 5 fC (~3 × 10 4 electrons) pulse of electrons at 2.8 MeV. The high quality of the electron diffraction patterns confirms that electron beam has a normalized emittance of ~50 nm rad. The transverse and longitudinal coherence length is ~11 and ~2.5 nm, respectively. The timing jitter between the pump laser and probe electron beam was found to be ~100 fs (rms). The temporal resolution is demonstrated by observing the evolution of Bragg and superlattice peaks of 1T-TaS 2 following an 800 nm optical pump and was found to be 130 fs. Lastly, our results demonstrate the advantages of MeV electrons, including large elastic differential scattering cross-section and access to high-order reflections, and the feasibility of ultimately realizing below 10 fs time-resolved electron diffraction.

74 ATOMIC AND MOLECULAR PHYSICS↗

Dissecting subcycle interference in photoelectron holography

Multipath holographic interference in strong-field quantum tunnel ionization is key to revealing subangstrom attosecond dynamics for molecular movies. This critical subcycle motion is often obscured by longer timescale effects such as ring-shaped patterns that appear in above-threshold ionization (ATI). In the present work, we overcome this problem by combining two techniques in theory and experimental analysis: unit-cell averaging and time-filtering data and simulations. Together these suppress ATI rings and enable an unprecedented highly detailed quantitative match between strong-field ionization experiments in argon and the Coulomb-quantum orbit strong-field approximation (CQSFA) theory. Velocity map images reveal fine modulations on the holographic spiderlike interference fringes that form near the polarization axis. CQSFA theory traces this to the interference of three types of electron pathways. The level of agreement between experiment and theory allows sensitive determination of quantum phase differences and symmetries, providing an important tool for quantitative dynamical imaging in quantum systems.

74 ATOMIC AND MOLECULAR PHYSICS↗

Design, installation, commissioning and operation of a beamlet monitor in the negative ion beam test stand at NIFS

In the framework of the accompanying activity for the development of the two neutral beam injectors for the ITER fusion experiment, an instrumented beam calorimeter is being designed at Consorzio RFX, to be used in the SPIDER test facility (particle energy 100keV; beam current 50A), with the aim of testing beam characteristics and to verify the source proper operation. The main components of the instrumented calorimeter are one-directional carbon-fibre-carbon composite tiles. Some prototype tiles have been used as a small-scale version of the entire calorimeter in the test stand of the neutral beam injectors of the LHD experiment, with the aim of characterising the beam features in various operating conditions. The extraction system of the NIFS test stand source was modified, by applying a mask to the first gridded electrode, in order to isolate only a subset of the beamlets, arranged in two 3×5 matrices, resembling the beamlet groups of the ITER beam sources. The present contribution gives a description of the design of the diagnostic system, including the numerical simulations of the expected thermal pattern. Moreover the dedicated thermocouple measurement system is presented. The beamlet monitor was successfully used for a full experimental campaign, during which the main parameters of the source, mainly the arc power and the grid voltages, were varied. This contribution describes the methods of fitting and data analysis applied to the infrared images of the camera to recover the beamlet optics characteristics, in order to quantify the response of the system to different operational conditions. Some results concerning the beamlet features are presented as a function of the source parameters.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

First fluctuation measurements using an Imaging Neutral Particle Analyzer on DIII-D

A recent upgrade to the Imaging Neutral Particle Analyzer (INPA) on DIII-D has allowed for the first fluctuation measurements using an INPA to be taken during a neoclassical tearing mode (NTM). The INPA signal tracked the mode over 150 ms as the mode frequency dropped to zero, capturing both the NTM with poloidal and toroidal mode numbers $m/n=2/1$ and a $3/2$ mode at double the frequency. Analysis shows that the signals originate from charge exchange events near the edge of the plasma, and relative fluctuation amplitudes are greater than 25% for the duration of the NTM. Filtered signals show frequency beating patterns that are phase-space dependent. Simulated signal is dominated by prompt transport from the neutral beams to the INPA sightline, while the contribution from the slowing down distribution is significantly lower. Simulated measurements in the range of pitches that the diagnostic is sensitive to (0.5≤|v∥/v|≤ 0.75) show the signal is dominated by trapped orbits that pass through magnetic islands near the edge of the plasma. Calculations of expected fluctuation levels show that only direct interaction with the NTM can provide the strong relative fluctuation levels seen experimentally. The prompt nature of the orbits and thin radial layer found to contribute to synthetic signals suggest INPA passive data may be used to measure the perturbations of confined orbits on a single pass through a plasma instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Helical van der Waals crystals with discretized Eshelby twist

The ability to manipulate the twisting topology of van der Waals structures offers a new degree of freedom through which to tailor their electrical and optical properties. The twist angle strongly affects the electronic states, excitons and phonons of the twisted structures through interlayer coupling, giving rise to exotic optical, electric and spintronic behaviours1,2,3,4,5. In twisted bilayer graphene, at certain twist angles, long-range periodicity associated with moiré patterns introduces flat electronic bands and highly localized electronic states, resulting in Mott insulating behaviour and superconductivity3,4. Theoretical studies suggest that these twist-induced phenomena are common to layered materials such as transition-metal dichalcogenides and black phosphorus6,7. Twisted van der Waals structures are usually created using a transfer-stacking method, but this method cannot be used for materials with relatively strong interlayer binding. Facile bottom-up growth methods could provide an alternative means to create twisted van der Waals structures. Here we demonstrate that the Eshelby twist, which is associated with a screw dislocation (a chiral topological defect), can drive the formation of such structures on scales ranging from the nanoscale to the mesoscale. In the synthesis, axial screw dislocations are first introduced into nanowires growing along the stacking direction, yielding van der Waals nanostructures with continuous twisting in which the total twist rates are defined by the radii of the nanowires. Further radial growth of those twisted nanowires that are attached to the substrate leads to an increase in elastic energy, as the total twist rate is fixed by the substrate. The stored elastic energy can be reduced by accommodating the fixed twist rate in a series of discrete jumps. This yields mesoscale twisting structures consisting of a helical assembly of nanoplates demarcated by atomically sharp interfaces with a range of twist angles. We further show that the twisting topology can be tailored by controlling the radial size of the structure.

Liu, Yin↗

Fabrication of nanoporous membranes for tuning microbial interactions and biochemical reactions

Here we describe how new strategies for combining conventional photo- and soft- lithographic techniques with high-resolution patterning and etching strategies are needed in order to produce multi-scale fluidic platforms that address the full range of functional scales seen in complex biological and chemical systems. The smallest resolution required for an application often dictates the fabrication method used. Micromachining and micro-powder blasting yield higher throughput, but lack the resolution needed to fully address biological and chemical systems at the cellular and molecular scales. In contrast, techniques such as electron beam lithography or nanoimprinting allow nanoscale resolution, but are traditionally considered costly and slow. Other techniques such as photolithography or soft lithography have characteristics between these extremes. Combining these techniques to fabricate multi-scale or hybrid fluidics allows fundamental biological and chemical questions can be answered. In this study, a combination of photolithography and electron beam lithography are used to produce two multi-scale fluidic devices that incorporate porous membranes into complex fluidic networks to control the flow of energy, information, and materials in chemical form. In the first device, materials and energy were used to support chemical reactions. A nanoporous membrane fabricated with e-beam lithography separates two parallel, serpentine channels. Photolithography was used to write microfluidic channels around the membrane. The pores were written at 150nm and reduced in size with silicon dioxide deposition from plasma enhanced chemical vapor deposition (PECVD) and atomic layer deposition (ALD). Using this method, the molecular weight cutoff (MWCO) of the membrane can be adapted to the system of interest. In the second approach, photolithography was used to fabricate 200nm thin pores. The pores confined microbes and allowed energy replenishment from a media perfusion channel. The same device can be used for study of intercellular communication via the secretion and uptake of signal molecules. Pore size was tested with 750nm fluorescent polystyrene beads and fluorescein dye. The 200nm PDMS pores were shown to be robust enough to hold 750nm beads while under pressure, but allow fluorescein to diffuse across the barrier. Further testing showed that extended culture of bacteria within the chambers was possible. Finally, these two examples show how lithographically defined porous membranes can be adapted to two unique situations and used to tune the flow of chemical energy, materials, and information within a microfluidic network.

36 MATERIALS SCIENCE↗

Incidence of Breast Cancer in the Life Span Study of Atomic Bomb Survivors: 1958–2009

The importance of reproductive history in breast tissue development and etiology of sporadic breast cancer in females is well established. However, there is limited evidence of factors, other than age, that modify risk of radiation-related breast cancer. In this study, we evaluated breast cancer incidence in the Life Span Study cohort of atomic bomb survivors, adding 11 years of follow-up and incorporating reproductive history data. We used Poisson regression models to describe radiation risks and modifying effects of age and reproductive factors. Among 62,534 females, we identified 1,470 breast cancers between 1958 and 2009. Of 397 new cases diagnosed since 1998, 75% were exposed before age 20. We found a strong linear dose response with excess relative risk (ERR) of 1.12 per Gy [95% confidence interval (CI): 0.73 to 1.59] for females at age 70 after exposure at age 30. The ERR decreased with increasing attained age (P = 0.007) while excess absolute rate (EAR) increased with attained age up to age 70 (P < 0.001). Age at menarche was a strong modifier of the radiation effect: for a given dose, both the ERR and EAR decreased with increasing age at menarche (P = 0.007 and P < 0.001). Also, independently, age-at-exposure effects on ERR and EAR differed before and after menarche (P = 0.043 and P = 0.015, respectively, relative to log-linear trends), with highest risks for exposures around menarche. Despite the small number of male breast cancers (n = 10), the data continue to suggest a dose response (ERR per Gy = 5.7; 95% CI: 0.3 to 30.8; P = 0.018). Persistently increased risk of female breast cancer after radiation exposure and its modification pattern suggests heightened breast sensitivity during puberty.

60 APPLIED LIFE SCIENCES↗