Search NASA⌕ Search

SEARCH · Search NASA

Results for “density estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Electrical Characteristics and Interface Properties of III Nitride-Based Metal-Insulator-Semiconductor Structure

In this work, III-Nitride based metal-insulator-semiconductor (MIS) structure has been studied using AlN/GaN heterostructures on Si (111) with AlN buffer layer grown by plasma-assisted molecular beam epitaxy (MBE). The structural and electrical characteristics of the films were studied through high resolution x-ray diffraction (HRXRD), capacitance-voltage (C-V) and current-voltage (I-V) measurements. The value of flat-band voltage was -0.7 V. A total fixed oxide charge density of 2.73x10{sup 11} cm{sup -2} was estimated. Terman's method was used to obtain the density of interface state in the MIS structure. The analysis showed low interface state density values of 3.66x10{sup 11} cm{sup -2} eV{sup -1}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Titan Density Reconstruction Using Radiometric and Cassini Attitude Control Flight Data

This paper compares three different methods of Titan atmospheric density reconstruction for the Titan 87 Cassini flyby. T87 was a unique flyby that provided independent Doppler radiometric measurements on the ground throughout the flyby including at Titan closest approach. At the same time, the onboard accelerometer provided an independent estimate of atmospheric drag force and density during the flyby. These results are compared with the normal method of reconstructing atmospheric density using thruster on-time and angular momentum accumulation. Differences between the estimates are analyzed and a possible explanation for the differences is evaluated.

Andrade, Luis G., Jr.↗

Measurement of wave-front aberration in a small telescope remote imaging system using scene-based wave-front sensing

Reference-free compensated imaging makes an estimation of the Fourier phase of a series of images of a target. The Fourier magnitude of the series of images is obtained by dividing the power spectral density of the series of images by an estimate of the power spectral density of atmospheric turbulence from a series of scene based wave front sensor (SBWFS) measurements of the target. A high-resolution image of the target is recovered from the Fourier phase and the Fourier magnitude.

47 OTHER INSTRUMENTATION↗

P-type InGaN across the entire alloy composition range

A systematic investigation on Mg doped and undoped InGaN epilayers grown by plasma-assisted molecular beam epitaxy has been conducted. Single phase InGaN alloys across the entire composition range were synthesized and Mg was doped into In{sub x}Ga{sub 1-x}N (0.1 {<=} x {<=} 0.88) epilayers up to {approx}10{sup 20}/cm{sup 3}. Hall effect, thermopower, and electrochemical capacitance voltage experimental results demonstrate the realization of p-type InGaN across the entire alloy composition range for properly Mg doped InGaN. Hole densities have been measured or estimated to be in the lower {approx}10{sup 18}/cm{sup 3} range when the net acceptor concentrations are in the lower {approx}10{sup 19}/cm{sup 3} range across the composition range.

36 MATERIALS SCIENCE↗

Multi-Objective Boundary Analysis of Discrete and Integrated SiC FET Modular Non-inverting Buck and Boost Converters for Fuel Cell EVs

This paper presents a multi-objective analysis of discrete and integrated SiC FET-based non-inverting buck-boost converter modules for modular fuel cell electric vehicle (EV) systems. Two converter ratings, 60 kW and 90 kW, are evaluated for both implementations, scalable up to 420 kW and 450 kW, respectively. Performance is assessed across efficiency, volumetric and gravimetric power density, cost, thermal stress, and estimated lifetime, where lifetime is derived from SiC FET B10 power-cycling data and junction temperature variations at rated power. A normalized overall performance index combined with a Pareto-boundary framework is used to identify configurations that optimally balance competing objectives. Results show that most configurations lie on the Pareto front, providing balanced trade-offs, while certain high-power discrete (90 kW at 450 kW) and integrated (60 kW at 180−420 kW) configurations are dominated. In general, discrete modules are more favorable for lower-power modular systems due to higher power density and lower cost, whereas integrated modules become more advantageous at higher power levels due to improved thermal behavior and longer lifetime. These findings provide practical design guidance for scalable fuel cell converter architectures and highlight the importance of system-level trade-offs in modular power electronics design.

Asa, Erdem [ORNL] (ORCID:0000000190884812)↗

Optical emission spectroscopic studies and comparisons of CH{sub 3}F/CO{sub 2} and CH{sub 3}F/O{sub 2} inductively coupled plasmas

A CH{sub 3}F/CO{sub 2} inductively coupled plasma (ICP), sustained in a compact plasma reactor, was investigated as a function of power (5–400 W) and feed gas composition, at a pressure of 10 mTorr, using optical emission spectroscopy and rare gas actinometry. Number densities of H, F, and O increased rapidly between 74% and 80% CO{sub 2}, ascribed to the transition from polymer-covered to polymer-free reactor walls, similar to that found previously in CH{sub 3}F/O{sub 2} ICPs at 48% O{sub 2}. Below 40% O{sub 2} or CO{sub 2}, relative emission intensity ratios were almost identical for most key species in CH{sub 3}F/O{sub 2} and CH{sub 3}F/CO{sub 2} ICPs except for higher OH/Xe (a qualitative measure of OH and H{sub 2}O densities) over the full range of CH{sub 3}F/O{sub 2} composition. The number density of H, F, and O increased with power in CH{sub 3}F/CO{sub 2} (20%/80%) plasmas (polymer-free walls), reaching 4.0, 0.34, and 1.6 × 10{sup 13}/cm{sup 3}, respectively, at 300 W. The CO number density increased with power and was estimated, based on self-actinometry, to be 8.8 × 10{sup 13}/cm{sup 3} at 300 W. The CO{sub 2} number density was independent of power below 40 W (where very little decomposition occurred), and then decreased rapidly with increasing power, reaching 2.8 × 10{sup 13}/cm{sup 3} at 300 W, corresponding to 83% dissociation. Films deposited on p-Si, 10 cm from the open, downstream end of the plasma reactor, were analyzed by x-ray photoelectron spectroscopy. Between 10% and 40% CO{sub 2} or O{sub 2} addition to CH{sub 3}F, film deposition rates fell and O content in the films increased. Faster deposition rates in CH{sub 3}F/CO{sub 2} plasmas were ascribed mainly to a larger thermodynamic driving force to form solid carbon, compared with CH{sub 3}F/O{sub 2} plasmas. Oxygen content in the films increased with increasing CO{sub 2} or O{sub 2} addition, but for the same deposition rate, no substantial differences were observed in the composition of the films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ammonia Observations of NGC 6334 I(N)

Coincident with the far-infrared source NGC 6334 I(N) and water maser source E is a massive dense cloud which has the most intense ammonia (1, 1) emission of any known interstellar cloud. We have mapped the (3, 3) emission and find the cloud is extended 0.8 pc in the direction parallel to the Galactic plane, and 0.5 pc perpendicular to it. It has a velocity gradient of 1 km/s.pc perpendicular to the Galactic plane. The gas kinetic temperature is about 30 K and the density is greater than 10(exp 6)/cc. The mass of the cloud is about 3000 solar mass, 3 times greater than previously estimated. The para-ammonia column density is 6 - 8 x 10(exp 15)/sq cm. An ammonia abundance of 0.5 - 1.5 x 10(exp -8) is inferred, where the larger number assumes an early time ortho/para ratio. This suggests either a cloud age of less than approximately 10(exp 6) yr, or substantial depletion of ammonia.

Kuiper, T. B. H.↗

An Ab Initio Study of CuCO

Modified coupled-pair functional (MCPF) calculations and coupled cluster singles and doubles calculations, which include a perturbational estimate of the connected triples [CCSD(T)], yield a bent structure for CuCO, thus, supporting the prediction of a nonlinear structure based on density functional (DF) calculations. Our best estimate for the binding energy is 4.9 +/- 1.4 kcal/mol; this is in better agreement with experiment (6.0 +/- 1.2 kcal/mol) than the DF approach which yields a value (19.6 kcal/mol) significantly larger than experiment.

Bauschlicher, Charles W., Jr.↗

A NEW METHOD FOR OBTAINING THE STAR FORMATION LAW IN GALAXIES

We present a new observational method to evaluate the exponent of the star formation law as initially formulated by Schmidt, i.e., the power-law expression assumed to relate the rate of star formation in a volume of space to the local total gas volume density present there. Total volume densities in the gas clouds surrounding an OB association are determined with a simple model which considers the atomic hydrogen as a photodissociation product on the cloud surfaces. The photodissociating photon flux incident on the cloud is computed from the far-UV luminosity of the OB association and the geometry. As an example, we have applied this 'PDR Method' to a sample of star-forming regions in M33 using Very Large Array (VLA) 21 cm data for the H I and Galaxy Evolution Explorer (GALEX) imagery in the far-UV. With these two observables, our approach provides an estimate of the total volume density of hydrogen (atomic + molecular) in the gas clouds surrounding the young star cluster. A graph in logarithmic coordinates of the cluster UV luminosity versus the total density in the surrounding gas provides a direct measure of the exponent of the star formation law. However, we show that this plot is severely affected by observational selection, which renders large areas of the diagram inaccessible to the data. An ordinary least-squares regression fit to a straight line, therefore, gives a strongly biased result. In the present case, the slope of such a fit primarily reflects the boundary defined when the 21 cm line becomes optically thick and is no longer a reliable measure of the H I column density. We use a maximum likelihood statistical approach which can deal with truncated and skewed data, and also takes account of the large uncertainties in the total gas densities which we derive. The exponent we obtain for the Schmidt law in M33 is 1.4 {+-} 0.2.

79 ASTRONOMY AND ASTROPHYSICS↗

NEAR-INFRARED SPECTROSCOPY OF TW Hya: A REVISED SPECTRAL TYPE AND COMPARISON WITH MAGNETOSPHERIC ACCRETION MODELS

We present high signal-to-noise ratio (S/N), moderate spectral resolution (R {approx} 2000-2500) near-infrared (0.8-5.0 {mu}m) spectroscopy of the nearby T Tauri star TW Hya. By comparing the spectrum and the equivalent widths of several atomic and molecular features with those for stars in the IRTF near-infrared library, we revise the spectral type to M2.5V, which is later than what is usually adopted (K7V). This implies a substantially cooler stellar temperature than previously assumed. Comparison with various pre-main-sequence models suggests that TW Hya is only {approx}3 Myr old, much younger than the usually adopted 8-10 Myr. Analysis of the relative strengths of the H lines seen in the spectrum yields estimates for the temperature and density of the emitting region of T{sub e} {>=} 7500 K and n{sub e} {approx} 10{sup 12}-10{sup 13} cm{sup -3}. The thickness of the emitting region is 10{sup 2}-10{sup 4} km and the covering fraction is f{sub *} {approx} 0.04. Our derived physical parameter values agree with the predictions of the magnetospheric accretion scenario. The highest S/N H lines have profiles that indicate multiple emission components. We derive an excess spectrum (above that of the M2.5V template) that peaks in the H band. Although our derived veiling values ({approx}0.1) agree with previous estimates, the excess spectrum does not match that of current models in which this flux is generated by an inner optically thin disk. We suggest that the excess flux spectrum instead reflects the differences in atmospheric opacity, gravity, and age between TW Hya and older, higher gravity, field M2.5 dwarfs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The diagnostic potential of Fe lines applied to protostellar jets

We investigate the diagnostic capabilities of iron lines for tracing the physical conditions of shock-excited gas in jets driven by pre-main sequence stars. We have analyzed the 3000-25000 Å, X-shooter spectra of two jets driven by the pre-main sequence stars ESO-Hα 574 and Par-Lup 3-4. Both spectra are very rich in [Fe II] lines over the whole spectral range; in addition, lines from [Fe III] are detected in the ESO-Hα 574 spectrum. Non-local thermal equilibrium codes solving the equations of the statistical equilibrium along with codes for the ionization equilibrium are used to derive the gas excitation conditions of electron temperature and density and fractional ionization. An estimate of the iron gas-phase abundance is provided by comparing the iron lines emissivity with that of neutral oxygen at 6300 Å. The [Fe II] line analysis indicates that the jet driven by ESO-Hα 574 is, on average, colder (T {sub e} ∼ 9000 K), less dense (n {sub e} ∼ 2 × 10{sup 4} cm{sup –3}), and more ionized (x {sub e} ∼ 0.7) than the Par-Lup 3-4 jet (T {sub e} ∼ 13,000 K, n {sub e} ∼ 6 × 10{sup 4} cm{sup –3}, x {sub e} < 0.4), even if the existence of a higher density component (n {sub e} ∼ 2 × 10{sup 5} cm{sup –3}) is probed by the [Fe III] and [Fe II] ultra-violet lines. The physical conditions derived from the iron lines are compared with shock models suggesting that the shock at work in ESO-Hα 574 is faster and likely more energetic than the Par-Lup 3-4 shock. This latter feature is confirmed by the high percentage of gas-phase iron measured in ESO-Hα 574 (50%-60% of its solar abundance in comparison with less than 30% in Par-Lup 3-4), which testifies that the ESO-Hα 574 shock is powerful enough to partially destroy the dust present inside the jet. This work demonstrates that a multiline Fe analysis can be effectively used to probe the excitation and ionization conditions of the gas in a jet without any assumption on ionic abundances. The main limitation on the diagnostics resides in the large uncertainties of the atomic data, which, however, can be overcome through a statistical approach involving many lines.

79 ASTRONOMY AND ASTROPHYSICS↗

An X-ray and radio study of steep-spectrum radio soruces. I - Four fields from the Clark Lake Observatory 26 MHz survey

A multifrequency study of fields containing steep-spectrum radio sources is presented. New spectral and spatial data are used to determine the locations and optical identifications of steep-spectrum sources which previously had either poor positions or questionable correspondence to known sources. X-ray images from the Einstein Observatory provide estimates of the extent, temperature, density, and thermal pressure of hot gas associated with galaxies and clusters of galaxies. From the equations relating synchrotron emission to inverse Compton scattering of 3 K background photons, lower limits to the average magnetic field strength in the source are derived. For the resolved radio sources of known distance, the minimum nonthermal pressure and the corresponding magnetic field strength are also calculated. For the four fields discussed in this paper, it is found that three out of five steep-spectrum sources are embedded in a cluster atmosphere and two are unidentified. Except for unresolved radio structures associated with cores of galaxies, the estimated thermal pressure is sufficient to confine the radio sources.

Harris, D. E.↗

WE-A-BRF-01: Dual-Energy CT Imaging in Diagnostic Imaging and Radiation Therapy

The quantification accuracy of dual-energy imaging is influenced by the fundamentals of x-ray physics, system geometry, data acquisition hardware/protocol, system calibration, and image processing technique. This symposium will provide updates on the following advanced application areas: Mammography. Volumetric breast density techniques based on standard mammograms require estimation of breast thickness, which is difficult to accurately measure. By comparison, calculation of breast density using dual energy mammography does not require measurement of breast thickness. Dual energy mammography has been implemented using both energy integrating flat panel detectors in conjunction with beam energy switching and energy resolved photon counting detectors. These techniques have been optimized using simulation studies and validated using physical phantoms and postmortem breasts. Chemical decomposition was used as the gold standard for volumetric breast density measurement in postmortem breasts. Breast density measurements have also been compared with results from four-category BI-RADS density rankings, standard image thresholding and Fuzzy k-mean clustering techniques. These studies indicate that dual energy mammography can be used to accurately measure volumetric breast density. Cardiovascular CT. The predicative accuracy of risk models for recurrent stroke and cardiac arrest depends heavily on accurate differentiation of thrombus or calcium from iodine in left atrial appendage or coronary arteries. The amount of energy separation is constrained by image noise; therefore, optimal kVp, beam filtration, and balanced flux are essential for the quantification accuracy of iodine and calcium. The basis materials are combined linearly to generate monochromatic energy images, where CT# accuracy and CNR are energy dependent. With optimal monochromatic energy, the mean iodine concentration for the thrombus, circulatory stasis, and control groups are significantly different. Risk classification based on calcium scores shows excellent agreement with classification on the basis of conventional coronary artery calcium scoring. These studies demonstrate dual-energy cardiovascular CT can potentially be a noninvasive and sensitive modality in high risk patients. On-board KV/MV Imaging. To enhance soft tissue contrast and reduce metal artifacts, we have developed a dual-energy CBCT technique and a novel on-board kV/MV imaging technique based on hardware available on modern linear accelerators. We have also evaluated the feasibility of these two techniques in various phantom studies. Optimal techniques (energy, beam filtration, # of overlapping projections, etc) have been investigated with unique calibration procedures, which leads to successful decomposition of imaged material into acrylic-aluminum basis material pair. This enables the synthesis of virtual monochromatic (VM) CBCT images that demonstrate much less beam hardening, significantly reduced metal artifacts, and/or higher soft tissue CNR compared to single-energy CBCT. Adaptive Radiation Therapy. DECT could actually contribute to the area of Dose-Guided Radiation Therapy (or Adaptive Therapy). The application of DECT imaging using 80kV and 140 kV combinations could potentially increase the image quality by reducing the bone or high density material artifacts and also increase the soft tissue contrast by a light contrast agent. The result of this higher contrast / quality images is beneficial for deformable image registration / segmentation algorithm to improve its accuracy hence to make adaptive therapy less time consuming in its recontouring process. The real time re-planning prior to per treatment fraction could become more realistic with this improvement especially in hypofractional SBRT cases. Learning Objectives: Learn recent developments of dual-energy imaging in diagnosis and radiation therapy; Understand the unique clinical problem and required quantification accuracy in each application; Understand the different approaches to optimize dual-energy imaging techniques for different applications.

60 APPLIED LIFE SCIENCES↗

A close correlation between nanostructure formations and the thickness dependence of the critical current density in pure and BaSnO{sub 3}-added GdBa{sub 2}Cu{sub 3}O{sub 7-δ} films

A close correlation between the nanostructure formations and the thickness dependence of the in-field critical current density (J{sub c}) in GdBa{sub 2}Cu{sub 3}O{sub 7-δ} (GdBCO) films is reported. Pure and 2 wt. % BaSnO{sub 3} (BSO)-added GdBCO films with film thicknesses (d) ranging from 0.2 μm to 1.5 μm were deposited on SrTiO{sub 3} single-crystalline substrates by using a pulsed laser deposition technique. Magnetization data measured at 77 K with the magnetic field applied parallel to the c-axis of the films showed the general trend of decreasing in-field J{sub c} with increasing residual film thickness. The two special inversions, however, were observed at d ∼ 0.6 μm, for which the J{sub c}’s of both the pure and BSO-added GdBCO films were larger than those of the films with d ∼ 0.4 μm. A sequential ion-milling process and scanning electron microscopy studies were employed to examine the microstructural evolution in the 1.5- μm-thick GdBCO films. For the pure GdBCO films, nanosized dislocations were observed to start growing at intersections of perpendicularly connected a-axis-oriented grains in a residual film thickness (t) of ∼ 0.6 μm and the growth persisted to the top surface of the 1.5-μm-thick GdBCO film. For the BSO-added GdBCO films, the density of BSO nanorods was estimated to be decreased versus t with an increase found at t of ∼ 0.6 μm A reason for this inversions of J{sub c} might be the nanostructure formations at t ∼ 0.6 μm, which were proved to serve as effective pinning centers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Infrared Observations of G0.18-0.04

The Galactic Center H(II) region, G0.18-0.04, the 'Sickle', is located where the nonthermal 'Arc' crosses the Galactic plane. The Sickle appears to be the ionized edge of a dense molecular cloud. The source of ionization has been ascribed to both the interaction of the cloud with the magnetic field of the Arc and to the hot stars in the adjacent cluster, AFGL 2004, also known as the 'Quintuplet Cluster'. This paper addresses the relative locations of the stars, the ionized and molecular gas, and the sources of gas excitation and dust heating. Using NASA's Kuiper Airborne Observatory, we have observed the far infrared forbidden lines of [S(III)] 18.7 and 33.5 micrometers, [Si(II)] 34.8 micrometers, [Ne(III)] 36.0 micrometers, [O(III)] 51.8 and 88.4 micrometers, [N(III)] 57.3 micrometers, [O(II)] 63.2 and 146 micrometers, [C(II)] 158 micrometers, and [N(II)] 205 micrometers and the adjacent continua at 11 positions around G0.18-0.04, including G0.15-0.05, the 'Pistol', in a beamsize of 40 - 60 arcsec. The electron density, the ionic abundances, and the ionization structure of the H(II) region are estimated from the doubly ionized line fluxes. The density and radiation field found in the photodissociation region (PDR) between the H(II) region and the molecular cloud are estimated from the [C(II)] and [O(I)] line fluxes and the far-infrared continuum. We compare the ionization structure and the PDR properties to shell models of H(II) regions with varying distances from their exciting stars. The agreement of observations and models indicates that the hot stars of AFGL 2004 are the likely source of ionization of the Sickle. Additional hot stars are necessary to ionize the more outlying positions. However, because of its low ionization and high PDR radiation field, the Pistol cannot be as close to AFGL 2004 as indicated by its close proximity on the sky. Instead, the Pistol is probably ionized by the luminous blue variable candidate, Pistol Source A. We estimated the extinction to the region from the distribution of the J, H, and K' magnitudes of the stars in the field that we measured from the Anglo-Australian telescope and from the IRAS LRS spectrum of AFGL 2004. The extinction is fairly uniform, with no enhancement from the molecular cloud. The strength of Brackett gamma, the 19-micrometer lines and continuum, and the IRAS 25-micrometer continuum are all consistent with the absence of a dense, foreground molecular cloud. We conclude that the H(II) region is on the near side of the dense cloud.

Simpson, Janet P.↗

Composition pulling effect and strain relief mechanism in AlGaN/AlN distributed Bragg reflectors

We report on the composition pulling effect and strain relief mechanism in AlGaN/AlN distributed Bragg reflectors (DBRs) grown on GaN template/{alpha}-Al{sub 2}O{sub 3}(0001) by metal organic chemical vapor deposition. The reciprocal space mapping contours reveal that these DBRs are coherently grown. Cross-section transmission electron microscopy image of the AlGaN/AlN DBRs and the energy-dispersive x-ray analysis indicate that an AlGaN layer with gradient Al composition is located between the Al{sub 0.4}Ga{sub 0.6}N and AlN layers along the [0001] direction. It is attributed to the fact that Ga atoms in AlGaN are pulled and segregated to the upper layer by the strain. The density of strain energy is estimated to reduce more than one order by forming this quasi-three-sublayer structure comparing to the designed bi-sublayer structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

GALAXY DOWNSIZING EVIDENCED BY HYBRID EVOLUTIONARY TRACKS

The stellar-dark halo mass relation of galaxies at different redshifts, M{sub s}(M{sub h}, z), encloses relevant features concerning their physical processes and evolution. This sequence of relations, defined in the range 0 < z < 4, together with average {Lambda} cold dark matter ({Lambda}CDM) halo mass aggregation histories (MAHs), is used here for inferring average galaxian hybrid evolutionary tracks (GHETs), where 'hybrid' remarks on the combination of observational (M{sub s}) and theoretical (M{sub h}) ingredients. As a result of our approach, a unified picture of stellar and halo mass buildup, population migration, and downsizing of galaxies as a function of mass is presented. The inferred average M{sub s} growth histories (GHETs) of the highest and lowest mass galaxies are definitively quite different from the average MAHs, M{sub h}(z), of the corresponding dark halos. Depending on how a given M{sub h}(z) compares with the mass at which the M{sub s}-to-M{sub h} ratio curve peaks at the epoch z, M{sub hp}(z), two evolutionary phases are evidenced: (1) galaxies in an active regime of M{sub s} growth when M{sub h} < M{sub hp} and (2) galaxies in a quiescent or passive regime when M{sub h}>M{sub hp}. The typical M{sub s} at which galaxies transit from the active (star-forming) to the quiescent regime, M{sub tran}, increases with z, log(M{sub tran}/M{sub sun}) {approx}10.30 + 0.55z, making evident a population downsizing phenomenon. This result agrees with independent observational determinations based on the evolution of the galaxy stellar mass function decomposition into blue and red galaxy populations. The specific star formation rate (SSFR) predicted from the derivative of the GHET is consistent with direct measures of the SSFR for galaxies at different redshifts, though both sets of observational inferences are independent. The average GHETs of galaxies smaller than M{sub tran} at z = 0 (M{sub s} {approx}10{sup 10.3} M{sub sun}, M{sub h} {approx}10{sup 11.8} M{sub sun}) did not reach the quiescent regime, and for them, the lower the mass, the faster the later M{sub s} growth rate (downsizing in SSFR). The GHETs allow us to predict the transition rate in the number density of active to passive population; the predicted values agree with direct estimates of the growth rate in the number density for the (massive) red population up to z {approx} 1. We show that {Lambda}CDM-based models of disk galaxy evolution, including feedback-driven outflows, are able to reproduce the low-mass side of the M{sub s}-M{sub h} relation at z {approx} 0, but at higher z strongly disagree with the GHETs: models do not reproduce the strong downsizing in SSFR and the high SSFR of low-mass galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

REJUVENATING THE MATTER POWER SPECTRUM. III. THE COSMOLOGY SENSITIVITY OF GAUSSIANIZED POWER SPECTRA

It was recently shown that applying a Gaussianizing transform, such as a logarithm, to the nonlinear matter density field extends the range of useful applicability of the power spectrum by a factor of a few smaller. Such a transform dramatically reduces nonlinearities in both the covariance and the shape of the power spectrum. Here, analyzing Coyote Universe real-space dark-matter density fields, we investigate the consequences of these transforms for cosmological parameter estimation. The power spectrum of the log-density provides the tightest cosmological parameter error bars (marginalized or not), giving a factor of 2-3 improvement over the conventional power spectrum in all five parameters tested. For the tilt, n{sub s} , the improvement reaches a factor of five. Similar constraints are achieved if the log-density power spectrum and conventional power spectrum are analyzed together. Rank-order Gaussianization seems just as useful as a log transform to constrain n{sub s} , but not other parameters. Dividing the overdensity by its dispersion in few-Mpc cells, while it diagonalizes the covariance matrix, does not seem to help with parameter constraints. We also provide a code that emulates these power spectra over a range of concordance cosmological models.

79 ASTRONOMY AND ASTROPHYSICS↗