Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffraction in time”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Dynamics of laser induced metal nanoparticle and pattern formation

Discontinuous metal films are converted into either almost round, isolated, and randomly distributed nanoparticles (NPs) or fringed patterns of alternate non transformed film and NPs by exposure to single pulses (20 ns pulse duration and 193 nm wavelength) of homogeneous or modulated laser beam intensity. The dynamics of NPs and pattern formation is studied by measuring in real time the transmission and reflectivity of the sample upon homogeneous beam exposure and the intensity of the diffraction orders 0 and 1 in transmission configuration upon modulated beam exposure. The results show that laser irradiation induces melting of the metal either completely or at regions around intensity maxima sites for homogeneous and modulated beam exposure, respectively, within ≤10 ns. The aggregation and/or coalescence of the initially irregular metal nanostructures is triggered upon melting and continues after solidification (estimated to occur at ≤80 ns) for more than 1 μs. The present results demonstrate that real time transmission rather than reflectivity measurements is a valuable and easy-to-use tool for following the dynamics of NPs and pattern formation. They provide insights on the heat-driven processes occurring both in liquid and solid phases and allow controlling in-situ the process through the fluence. They also evidence that there is negligible lateral heat release in discontinuous films upon laser irradiation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Defect chemistry of phospho-olivine nanoparticles synthesized by a microwave-assisted solvothermal process

Nanocrystalline LiFePO{sub 4} powders synthesized by a microwave-assisted solvothermal (MW-ST) process have been structurally characterized with a combination of high resolution powder neutron diffraction, synchrotron X-ray diffraction, and aberration-corrected HAADF STEM imaging. A significant level of defects has been found in the samples prepared at 255 and 275 °C. These temperatures are significantly higher than what has previously been suggested to be the maximum temperature for defect formation in LiFePO{sub 4}, so the presence of defects is likely related to the rapid MW-ST synthesis involving a short reaction time (∼5 min). A defect model has been tentatively proposed, though it has been shown that powder diffraction data alone cannot conclusively determine the precise defect distribution in LiFePO{sub 4} samples. The model is consistent with other literature reports on nanopowders synthesized at low temperatures, in which the unit cell volume is significantly reduced relative to defect-free, micron-sized LiFePO{sub 4} powders. - Graphical abstract: Temperature-dependent antisite defect formation has been observed in nanocrystalline LiFePO{sub 4} powders synthesized by a microwave solvothermal process, using high resolution diffraction and STEM imaging. Display Omitted - Highlights: • LiFePO{sub 4} nanopowders synthesized by a microwave-assisted solvothermal process. • Defects directly observed by aberration-corrected HAADF STEM imaging. • Antisite defects present from synthesis at 255 and 275 °C. • Defects present from higher temperature synthesis than previously reported. • Powder diffraction data have been analyzed in detail for various defect models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Status Report on Design of In-situ Thermomechanical Testing at LANSCE

Nuclear fuel encounters severe thermomechanical environments in which its mechanical response is determined by its microstructure, temperature and stress level histories. Simulating the response of such microstructures is crucial for predicting both performance and transient fuel mechanical responses and experimental verification of such predictions is therefore of great interest. While most of the deformation in a nuclear fuel rod occurs in the cladding, deformation of the fuel itself is still of interest with deformation mechanisms at operating temperature and above including creep, swelling, cracking as well as pellet-clad interaction. Characterization of these properties and understanding of the underlying deformation phenomena at operating or excursion temperatures is therefore of great importance for development and ultimately licensing of improved and novel nuclear fuel forms. Diffraction techniques offer unique insight on the atomistic (e.g. crystal structure) and microstructure (e.g. phase transformations, texture, defects) length scales and have a long history of providing unique data to inform relevant deformation models that enable the required predictive capabilities. For example, dislocations lead to diffraction peak broadening that can be characterized to estimate the dislocation density and study the role of dislocations on the deformation while measuring lattice strains allows to studie load sharing in two phase materials. In this report the requirements for a sample environment for high temperature deformation of nuclear fuels are defined. The HIPPO neutron time-of-flight diffractometer at LANSCE will host this sample environment and is also described. This instrument covers diffraction angles from 140° to 40° and is also equipped with an event-mode neutron imaging detector system, enabling energy-resolved neutron imaging in parallel with the diffraction that could measure sample temperature from Doppler broadening of neutron absorption resonances or measure pore densities from changes in the attenuation. Designs of devices to characterize thermomechanical properties of nuclear fuel without diffraction are also considered to guide the design. While this report is focused on applications for nuclear fuels, the device can also characterize cladding, moderator or structural materials and therefore contribute to other fields of research and development for advanced reactors. The temperatures planned to be reached are above 2000℃, thus enabling characterization of LWR reactor fuels under accident scenarios but also reaching temperatures of fuels developed for nuclear thermal propulsion and providing opportunities to characterize those. In conjunction with the energy-resolved neutron imaging detector, this setup would allow to measure neutron cross-sections at high temperatures, filling a gap towards development of reactors operating at high temperatures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Analyzer-based x-ray phase-contrast microscopy combining channel-cut and asymmetrically cut crystals

An analyzer-based x-ray phase-contrast microscopy (ABM) setup combining a standard analyzer-based x-ray phase-contrast imaging (ABI) setup [nondispersive 4-crystal setup (Bonse-Hart setup)] and diffraction by asymmetrically cut crystals is presented here. An attenuation-contrast microscopy setup with conventional x-ray source and asymmetrically cut crystals is first analyzed. Edge-enhanced effects attributed to phase jumps or refraction/total external reflection on the fiber borders were detected. However, the long exposure times and the possibility to achieve high contrast microscopies by using extremely low attenuation-contrast samples motivated us to assemble the ABM setup using a synchrotron source. This setup was found to be useful for low contrast attenuation samples due to the low exposure time, high contrast, and spatial resolution found. Moreover, thanks to the combination with the nondispersive ABI setup, the diffraction-enhanced x-ray imaging algorithm could be applied.

36 MATERIALS SCIENCE↗

Influence of amorphous silica on the hydration in ultra-high performance concrete

Amorphous silica particles (silica) are used in ultra-high performance concretes to densify the microstructure and accelerate the clinker hydration. It is still unclear whether silica predominantly increases the surface for the nucleation of C–S–H phases or dissolves and reacts pozzolanically. Furthermore, varying types of silica may have different and time dependent effects on the clinker hydration. The effects of different silica types were compared in this study by calorimetric analysis, scanning and transmission electron microscopy, in situ X-ray diffraction and compressive strength measurements. The silica component was silica fume, pyrogenic silica or silica synthesized by a wet-chemical route (Stoeber particles). Water-to-cement ratios were 0.23. Differences are observed between the silica for short reaction times (up to 3 days). Results indicate that silica fume and pyrogenic silica accelerate alite hydration by increasing the surface for nucleation of C–S–H phases whereas Stoeber particles show no accelerating effect.

36 MATERIALS SCIENCE↗

C{sub 2} and CN dynamics and pulsed laser deposition of CN{sub x} films

The time-resolved optical emission studies of laser ablated carbon plasma in nitrogen ambient are carried out to understand the dynamic of formation of C{sub 2} and CN for depositing quality thin films. An optimum formation of C{sub 2} is observed at 3 mm from the target surface and 350 ns after the initiation of plasma. However, CN is formed at comparatively larger distance, 4 mm, and larger delay (850 ns). The expanding plasma plume splits/bifurcates into slow and fast moving two distinct components, with the faster components further splitting up at later times (>350 ns) into two components. The estimated plume front velocity from plume imaging in the nitrogen ambient of 1.2 mbars at a delay of 100 ns is 3.8x10{sup 6} cm/s, consistent with spectroscopic measurement {approx}3.0x10{sup 6} cm/s. The CN{sub x} thin films deposited by pulsed laser deposition technique are characterized by x-ray diffraction, atomic force microscopy, and Raman spectroscopy. The high I{sub D}/I{sub G} ratio and peak position shift of G band to lower values in the films deposited for longer time indicates the high incorporation of nitrogen and increasing CN concentration within the film.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

New insights into water bonding during early tricalcium silicate hydration with quasielastic neutron scattering

New information on the water bonding during the first 36 h of hydration of tricalcium silicate was obtained using the high neutron flux at the sample position of the time-of-flight spectrometer (TOFTOF), FRM II in Garching, Germany, together with {sup 29}Si NMR and X-ray diffraction measurements. A rapid increase in the amount of constrained water was observed at the beginning of the induction period. This is attributed to the formation of an early C-S-H with a large specific surface area (around 800 m{sup 2}/g). During subsequent hydration, the amount of constrained water, as given by the total surface area of the hydration products, is controlled by (a) the formation of new metastable early C-S-H which increases total surface area and (b) polymerisation processes which reduce total surface area. The relative contribution of these processes varies during hydration.

36 MATERIALS SCIENCE↗

White-light interferometry for early-stage metal oxide growth characterization

Oxidation of metals can provide a functional oxide film or an oxide layer that can lead to material degradation causing performance limiting concerns. Because of the technological and economic impacts of oxidation, understanding early-stage oxidation growth and its mechanisms is of high importance. Unfortunately, poor empirical data during early-stage oxidation has left our current understanding of oxidation incomplete and woefully inadequate. Measurement techniques previously used for oxidation kinetics characterization include microbalance, x-ray diffraction, Fourier-transform infrared spectroscopy, and spectroscopic ellipsometry. However, these techniques lack the necessary time-resolution or vertical resolution in addition to not providing any spatial data, which is essential to early-stage oxidation studies to understand both oxidation kinetics and mechanisms. Here, a novel rapid and surface-sensitive data collection technique that provides three-dimensional spatial data of a growing oxide layer with sub-nanometer thickness resolution using white-light interferometry has been developed. This technique will be the first technique capable of providing real-time spatial results of early-stage oxidation growth. The effectiveness of this characterization tool is shown by observing the early-stage oxidation kinetics and film cracking of uranium heated to 90 °C under 500 torr of pure O 2 . Initially a parabolic oxidation growth is observed. Once the oxide layer reaches ≈ 30 nm, the epitaxial stresses between the uranium substrate and oxide film layer causes localized cracking in addition to the observed transition of the parabolic growth rate to a linear growth rate. The results of the white-light interferometry are verified by glancing incidence x-ray diffraction.

47 OTHER INSTRUMENTATION↗

Selected advances in small-angle scattering and applications they serve in manufacturing, energy and climate change

Innovations in small-angle X-ray and neutron scattering (SAXS and SANS) at major X-ray and neutron facilities offer new characterization tools for researching materials phenomena relevant to advanced applications. For SAXS, the new generation of diffraction-limited storage rings, incorporating multi-bend achromat concepts, dramatically decrease electron beam emittance and significantly increase X-ray brilliance over previous third-generation sources. This results in intense X-ray incident beams that are more compact in the horizontal plane, allowing significantly improved spatial resolution, better time resolution, and a new era for coherent-beam SAXS methods such as X-ray photon correlation spectroscopy. Elsewhere, X-ray free-electron laser sources provide extremely bright, fully coherent, X-ray pulses of <100 fs and can support SAXS studies of material processes where entire SAXS data sets are collected in a single pulse train. Meanwhile, SANS at both steady-state reactor and pulsed spallation neutron sources has significantly evolved. Developments in neutron optics and multiple detector carriages now enable data collection in a few minutes for materials characterization over nanometre-to-micrometre scale ranges, opening up real-time studies of multi-scale materials phenomena. SANS at pulsed neutron sources is becoming more integrated with neutron diffraction methods for simultaneous structure characterization of complex materials. In this paper, selected developments are highlighted and some recent state-of-the-art studies discussed, relevant to hard matter applications in advanced manufacturing, energy and climate change.

36 MATERIALS SCIENCE↗

A step closer to visualizing the electron___phonon interplay

The origin of the very high superconducting transition temperature (Tc) in ceramic copper oxide superconductors is one of the greatest mysteries in modern physics. In the superconducting state, electrons form pairs (known as Cooper pairs) and condense into the superfluid state to conduct electric current with zero resistance. For conventional superconductors, it is well established that the 2 electrons in a Cooper pair are 'bonded' by lattice vibrations (phonons), whereas in high-Tc superconductors, the 'glue' for the Cooper pairs is still under intense discussion. Although the high transition temperature and the unconventional pairing symmetry (d-wave symmetry) have led many researchers to believe that the pairing mechanism results from electron-electron interaction, increasing evidence shows that electron-phonon coupling also significantly influences the low-energy electronic structures and hence may also play an important role in high-Tc superconductivity. In a recent issue of PNAS, Carbone et al. use ultrafast electron diffraction, a recently developed experimental technique, to attack this problem from a new angle, the dynamics of the electronic relaxation process involving phonons. Their results provide fresh evidence for the strong interplay between electronic and atomic degrees of freedom in high-Tc superconductivity. In general, ultrafast spectroscopy makes use of the pump-probe method to study the dynamic process in material. In such experiments, one first shoots an ultrafast (typically 10-100 fs) 'pumping' pulse at the sample to drive its electronic system out of the equilibrium state. Then after a brief time delay ({Delta}t) of typically tens of femtoseconds to tens of picoseconds, a 'probing' pulse of either photons or electrons is sent in to probe the sample's transient state. By varying {Delta}t, one can study the process by which the system relaxes back to the equilibrium state, thus acquiring the related dynamic information. This pump-probe experiment is reminiscent of the standard method used by bell makers for hundreds of years to judge the quality of their products (hitting a bell then listening to how the sound would fade away), albeit the relevant time scale here is way beyond tens of femtoseconds. Traditionally, ultrafast spectroscopy was carried out to study gas-phase reactions, but it has also been applied to study condensed phase systems since the development of reliable solid-state ultrafast lasers approximately a decade ago. In addition, the ability to control pulse width, wavelength, and amplification of the output of Ti:Sapphire lasers has further increased the capability of this experimental method. During the past decade, many ultrafast pump-probe experiments have been carried out in various fields by using different probing methods, such as photo-resistivity, fluorescence yield, and photoemission, and they have revealed much new information complementary to the equilibrium spectroscopy methods used before. Carbone et al. used the photon-pump, electron (diffraction)-probe method. The pumping photon pulse first drives the electrons in the sample into an oscillating mode along its polarization direction. Then during the delay time, these excited electrons can transfer excess energy to the adjacent nuclei and cause crystal lattice vibration on their way back to the equilibrium state. An ultrashort electron pulse is shot at the sample at various time delays {Delta}t and the diffraction pattern is collected. Because the electron diffraction pattern is directly related to the crystal lattice structure and its motion, this technique provides a natural way to study the electron-phonon coupling problem. Furthermore, by adjusting the pump pulse's relative polarization with respect to the Cu-O bond direction, Carbone et al. were able to acquire the electron-phonon coupling strength along different directions. Focusing on the lattice dynamic along the c axis, Carbone et al. found that the c-axis phonons in the optimally-doped Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8} (Bi2212) are coupled to the electrons with different strength along different directions within the CuO{sub 2} plane. The coupling strength reaches its largest value along the 2 Cu-O bond directions and becomes the weakest along the bisector of the angle formed by the 2 Cu-O bonds. As pointed out by Carbone et al., these observations agree well with the calculated coupling strength between electrons and the buckling phonons. Furthermore, their observation of this anisotropic electron-phonon coupling also agrees with results from angle-resolved photoemission (ARPES), which measures the equilibrium-state properties of materials. In ARPES measurements, electron-phonon coupling manifests itself as a kink anomaly in the band dispersion and a corresponding sudden broadening in the spectral width.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High temperature oxidation behavior of austenitic stainless steel AISI 304 in steam of nanofluids contain nanoparticle ZrO2

The objective of this study is to evaluate high temperature oxidation behavior of austenitic stainless steel SS 304 in steam of nanofluids contain nanoparticle ZrO{sub 2}. The oxidation was performed at high temperatures ranging from 600 to 800°C. The oxidation time was 60 minutes. After oxidation the surface of the samples was analyzed by different methods including, optical microscope, scanning electron microscope (SEM) and X-ray diffraction (XRD). X-ray diffraction examination show that the oxide scale formed during oxidation of stainless steel AISI 304 alloys is dominated by iron oxide, Fe{sub 2}O{sub 3}. Minor element such as Cr{sub 2}O{sub 3} is also appeared in the diffraction pattern. Characterization by optical microscope showed that cross section microstructure of stainless steel changed after oxidized with the oxide scale on the surface stainless steels. SEM and x-ray diffraction examination show that the oxide of ZrO{sub 2} appeared on the surface of stainless steel. Kinetic rate of oxidation of austenite stainless steel AISI 304 showed that increasing oxidation temperature and time will increase oxidation rate.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Noise figure of amplified dispersive Fourier transformation

Amplified dispersive Fourier transformation (ADFT) is a powerful tool for fast real-time spectroscopy as it overcomes the limitations of traditional optical spectrometers. ADFT maps the spectrum of an optical pulse into a temporal waveform using group-velocity dispersion and simultaneously amplifies it in the optical domain. It greatly simplifies spectroscopy by replacing the diffraction grating and detector array in the conventional spectrometer with a dispersive fiber and single-pixel photodetector, enabling ultrafast real-time spectroscopic measurements. Following our earlier work on the theory of ADFT, here we study the effect of noise on ADFT. We derive the noise figure of ADFT and discuss its dependence on various parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic heterodyne moire deflectometry: A method for transient and three dimensional density fields measurements

Effects of diffraction and nonlinear photographic emulsion characteristics on the performance of deferred electronic heterodyne moire deflectometry are investigated. The deferred deflectometry is used for measurements of nonsteady phase objects where it is difficult to complete the analysis of the field in real time. The sensitivity, accuracy and resolution of the system are calculated and it is shown that they are weakly affected by diffraction and by nonlinear recording. The feactures of the system are significantly improved compared with the conventional deferred intensity moire technique, and are comparable with the online heterodyne moire. The system was evaluated experimentally by deferred measurements of the refractive index gradients of a weak phase object consisting of a large KD*P crystal. This was done by photographing the phase object through a Ronchi grating and analyzing the tranparency with the electronic heterodyne readout system. The results are compared with the measurements performed on the same phase object with online heterodyne moire deflectometry and with heterodyne holographic interferometry methods. Some practical considerations for system improvement are discussed.

Stricker, Josef↗

Formation of nanocrystalline h-AlN during mechanochemical decomposition of melamine in the presence of metallic aluminum

Decomposition of melamine was studied by solid state reaction of melamine and aluminum powders during high energy ball-milling. The milling procedure performed for both pure melamine and melamine/Al mixed powders as the starting materials for various times up to 48 h under ambient atmosphere. The products were characterized by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The results revealed that Al causes melamine deammoniation at the first stages of milling and further milling process leads to the s-triazine ring degradation while nano-crystallite hexagonal aluminum nitride (h-AlN) was the main solid product. Comparison to milling process, the possibility of the reaction of melamine with Al was also investigated by thermal treatment method using differential scanning calorimeter (DSC) and thermo gravimetric analyzer (TGA). Melamine decomposition occurred by thermal treatment in the range of 270-370 Degree-Sign C, but no reaction between melamine and aluminum was observed. - Graphical Abstract: Mechanochemical reaction of melamine with Al resulted in the formation of nanocrystalline AlN after 7 h milling time Highlights: Black-Right-Pointing-Pointer High energy ball milling of melamine and aluminum results decomposition of melamine with elimination of ammonia. Black-Right-Pointing-Pointer Nano-crystalline AlN was synthesized by the mechanochemical route. Black-Right-Pointing-Pointer Milling process has no conspicuous effect on pure melamine degradation. Black-Right-Pointing-Pointer No reaction takes place by heating melamine and aluminum powder mixture in argon.

36 MATERIALS SCIENCE↗

The synthesis and characterisation of LaCa{sub 2}Fe{sub 2}GaO{sub 8}

The synthesis and characterisation of LaCa{sub 2}Fe{sub 2}GaO{sub 8} is described. Neutron powder diffraction data reveal LaCa{sub 2}Fe{sub 2}GaO{sub 8} adopts an anion-vacancy ordered, 'triple layer' structure consisting of an OOT{sub L}OOT{sub R} stacking sequence of layers of (Fe/Ga)O{sub 6} octahedra (O) and (Fe/Ga)O{sub 4} tetrahedra (T), related to that of the 4-layer brownmillerite structures (a=5.4784(1) A, b=22.6780(4) A, c=5.6007(1) A, space group Pbma). The apex-linked chains of tetrahedra within structure of LaCa{sub 2}Fe{sub 2}GaO{sub 8} exhibit a cooperative twisting distortion which alternates in direction between adjacent layers of tetrahedra, the first time such an arrangement has been seen in a triple-layer phase. Magnetisation and neutron diffraction data reveal that LaCa{sub 2}Fe{sub 2}GaO{sub 8} exhibits two magnetic ordering transitions. On cooling below 550 K the phase adopts a state with short range antiferromagnetic coupling within each double layer of (Fe/Ga)O{sub 6} octahedra, but only weak coupling between layers. On cooling below 470 K full three-dimensional, G-type antiferromagnetic order is observed. - Graphical abstract: LaCa{sub 2}Fe{sub 2}GaO{sub 8} adopts an anion-vacancy ordered, 'triple layer' structure consisting of an OOT{sub L}OOT{sub R} stacking sequence of layers of FeO{sub 6} octahedra (O) and GaO{sub 4} tetrahedra (T), in which the chains of apex-linked tetrahedra exhibit a cooperative twisting distortion which alternates in direction between adjacent layers of tetrahedra. On cooling below 550 K, LaCa{sub 2}Fe{sub 2}GaO{sub 8} adopts a state with strong two-dimensional antiferromagnetic order within each double layer of FeO{sub 6} octahedra, but only weak coupling between layers. On cooling below 470 K full three-dimensional antiferromagnetic order is observed. Highlights: Black-Right-Pointing-Pointer LaCa{sub 2}Fe{sub 2}GaO{sub 8} exhibits a novel anion-vacancy ordered triple-layer structure type. Black-Right-Pointing-Pointer New structure variant rationalised on the basis of strucutral parameters. Black-Right-Pointing-Pointer Multiple magnetic transitions: paramagnetic-two-dimensional-three-dimensional.

36 MATERIALS SCIENCE↗

X-ray diffraction, optical microscopy, and microhardness studies of gas nitrided titanium alloys and titanium aluminide

Thermochemical surface gas nitriding of {beta}21s, Timetal 205 and a Ti-Al alloy was conducted using differential scanning calorimeter equipment, in nominally pure nitrogen at 850 deg. C and 950 deg. C ({beta}21s), 730 deg. C and 830 deg. C (Timetal 205), and 950 deg. C and 1050 deg. C (Ti-Al) for 1 h, 3 h and 5 h. X-ray diffraction analyses showed new phases formed in the nitrided layer, depending on the alloy and the time and the temperature of nitriding. Microstructures were analyzed using optical microscopy. Cross-sectional microhardness profiles of cross-sectional samples after nitriding were obtained using a Knoop indenter.

36 MATERIALS SCIENCE↗

Physicochemical and antibacterial characterization of ionocity Ag/Cu powder nanoparticles

Metal ion in bimetallic nanoparticles has shown vast potential in a variety of applications. In this paper we show the results of physical and chemical investigations of powder Ag/Cu nanoparticles obtained by chemical synthesis. Transmission electron microscopy (TEM) experiment indicated the presence of bimetallic nanoparticles in the agglomerated form. The average size of silver and copper nanoparticles is 17.1(4) nm (Ag) and 28.9(2) nm (Cu) basing on the X-ray diffraction (XRD) data. X-ray photoelectron (XPS) and Raman spectroscopies revealed the existence of metallic silver and copper as well as Cu{sub 2}O and CuO being a part of the nanoparticles. Moreover, UV–Vis spectroscopy showed surface alloy of Ag and Cu while Time of Flight Secondary Ion Mass Spectroscopy (ToF-SIMS) and Energy Dispersive X-ray Spectroscopy (EDX) showed heterogeneously distributed Ag structures placed on spherical Cu nanoparticles. The tests of antibacterial activity show promising killing/inhibiting growth behaviour for Gram positive and Gram negative bacteria. - Highlights: • Ag/Cu nanoparticles were obtained in the powder form. • The average size of nanoparticles is 17.1(4) nm (Ag) and 28.9(2) nm (Cu). • Ag/Cu powder nanoparticle shows promising antibacterial properties.

36 MATERIALS SCIENCE↗

Influence of clay mineral weathering on green rust formation at iron-reducing conditions

Green rusts (GR) are important drivers for trace metal and nutrient cycling in suboxic environments. We investigated whether green rusts would incorporate aluminum (Al) or other elements from naturally-formed clay minerals containing easily-weatherable clay minerals (e.g. mica, interlayered clays). We isolated the clay minerals from a Matapeake silt loam soil by removal of silt and sand, organic matter, and reducible oxides to study mechanisms of interaction between Fe(II) and soil-sourced clay minerals. We conducted batch Fe(II) sorption experiments at multiple near-neutral pHs (6.5–7.5) and reaction times (2h–365 days). Mineral transformations were characterized by selective extractions, X-ray diffraction (XRD), and Fe X-ray absorption spectroscopy (XAS) analyzed by shell-fitting and linear combination fitting (LCF) with natural and synthetic standards. Clay mineral fraction contained a mixture of quartz, kaolinite, interlayered vermiculite, mica, and chlorite with significant structural Fe (2.6% wt). Uptake of Fe(II) increased with pH and kinetics were rapid until 5 days, followed by slow continuous Fe(II) uptake. Citrate-bicarbonate desorption kinetics from Fe(II) sorbed clay released more Al and silicon (Si) compared with unreacted soil clay fraction whereas magnesium (Mg) and potassium (K) were unaffected. Citrate-bicarbonate extracted Fe contained more Fe(II) than an ideal GR with an Fe(II)/Fe(III) molar ratio of 5.50. Analysis of the Fe EXAFS by both LCF and shell fitting was best modeled as a combination of Fe(III)-clay reduction to Fe(II) and precipitation of GR and Fe(II)-Al LDH. After 7 days of Fe(II) sorption, LCF identified 55.2% total Fe in clay, 33.4% GR(Cl) and 11.4% Fe(II)-Al LDH. Further, these results provide novel evidence of Fe(II)-Al LDHs precipitating on naturally-formed soil clay minerals as a minor phase to GR. The geochemical implications are that GRs formed in soils and sediments should be considered to have Al and Si as well as Mg substitutions affecting their structure and reactivity.

58 GEOSCIENCES↗