Search NASA⌕ Search

SEARCH · Search NASA

Results for “disk”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

A NICER Spectrum of MAXI J1535-571: Near-Maximal Black Hole Spin and Potential Disk Warping

We report on a Neutron star Interior Composition Explorer (NICER) observation of the Galactic X-ray binary and stellar-mass black hole candidate, MAXI J1535−571. The source was likely observed in an "intermediate" or "very high" state, with important contributions from both an accretion disk and hard X-ray corona. The 2.3-10 keV spectrum shows clear hallmarks of relativistic disk reflection. Fits with a suitable model strongly indicate a nearmaximal spin parameter of a = cJ/GM(exp 2) = 0.994(2) and a disk that extends close to the innermost stable circular orbit, r/r(sub ISCO) = 1.08(8) (1σ statistical errors). In addition to the relativistic spectrum from the innermost disk, a relatively narrow Fe K emission line is also required. The resolution of NICER reveals that the narrow line may be asymmetric, indicating a specific range of emission radii. Fits with a relativistic line model suggest an inner radius of r = 144 +140/-60 GM/c(exp 2) for the putative second reflection geometry; full reflection models suggest that radii a few times larger are possible. The origin of the narrow line is uncertain, but a warp likely provides the most physically plausible explanation. We discuss our results in terms of the potential for NICER to reveal new features of the inner and intermediate accretion disk around black holes.

Miller, J. M.↗

Observations of Fast-Moving Features in the Debris Disk of AU Mic on a Three-Year Timescale: Confirmation and New Discoveries

Context. The nearby and young M star AU Mic is surrounded by a debris disk in which we previously identified a series of large-scale arch-like structures that have never been seen before in any other debris disk and that move outward at high velocities. Aims. We initiated a monitoring program with the following objectives: (1) track the location of the structures and better constrain their projected speeds, (2) search for new features emerging closer in, and ultimately (3) understand the mechanism responsible for the motion and production of the disk features. Methods. AU Mic was observed at 11 different epochs between August 2014 and October 2017 with the IR camera and spectrograph of SPHERE. These high-contrast imaging data were processed with a variety of angular, spectral, and polarimetric differential imaging techniques to reveal the faintest structures in the disk. We measured the projected separations of the features in a systematic way for all epochs. We also applied the very same measurements to older observations from the Hubble Space Telescope (HST) with the visible cameras STIS and ACS. Results. The main outcomes of this work are (1) the recovery of the five southeastern broad arch-like structures we identified in our first study, and confirmation of their fast motion (projected speed in the range 4–12 km/s); (2) the confirmation that the very first structures observed in 2004 with ACS are indeed connected to those observed later with STIS and now SPHERE; (3) the discovery of two new very compact structures at the northwest side of the disk (at 0.40′′ and 0.55′′ in May 2015) that move to the southeast at low speed; and (4) the identification of a new arch-like structure that might be emerging at the southeast side at about 0.4′′ from the star (as of May 2016). Conclusions. Although the exquisite sensitivity of SPHERE allows one to follow the evolution not only of the projected separation, but also of the specific morphology of each individual feature, it remains difficult to distinguish between possible dynamical scenarios that may explain the observations. Understanding the exact origin of these features, the way they are generated, and their evolution over time is certainly a significant challenge in the context of planetary system formation around M stars.

Boccaletti, A.↗

Multiple Rings of Millimeter Dust Emission in the HD 15115 Debris Disk

We present observations of the HD 15115 debris disk from the Atacama Large Millimeter/submillimeter Array (ALMA) at 1.3 mm that capture this intriguing system with the highest resolution (0."6 or 29 au) at millimeter wavelengths to date. This new ALMA image shows evidence for two rings in the disk separated by a cleared gap. By fitting models directly to the observed visibilities within a Markov Chain Monte Carlo framework, we are able to characterize the millimeter continuum emission and place robust constraints on the disk structure and geometry. In the best-fit model of a power-law disk with a Gaussian gap, the disk inner and outer edges are at 43.9 ± 5.8 au (0."89 ± 0."12) and 92.2 ± 2.4 au (1."88 ± 0."49), respectively, with a gap located at 58.9 ± 4.5 au (1."2 ± 0."10) with a fractional depth of 0.88 ± 0.10 and a width of 13.8 ± 5.6 au (0."28 ± 0."11). Because we do not see any evidence at millimeter wavelengths for the dramatic east–west asymmetry seen in scattered light, we conclude that this feature most likely results from a mechanism that only affects small grains. Using dynamical modeling and our constraints on the gap properties, we are able to estimate a mass for the possible planet sculpting the gap to be 0.16 ± 0.06 M(sub Jup).

MacGregor, Meredith A.↗

Modeling the Precession of the Warped Inner Accretion Disk in the Pulsars LMC X-4 and SMC X-1 with NuSTAR and XMM-Newton

We present a broad-band X-ray study of the effect of superorbital periods on X-ray spectra and pulse profiles in the neutron star X-ray binaries LMC X-4 and SMC X-1. These two sources display periodic or quasi-periodic variations in luminosity on the order of tens of days which are known to be superorbital, and are attributed to warped, precessing accretion disks. Using joint NuSTAR and XMM-Newton observations that span a complete superorbital cycle, we examine the broad-band spectra of these sources and find the shape to be well described by an absorbed power law with a soft blackbody component. Changes in spectral shape and pulse profile shape are periodic with superorbital period, as expected from a precessing disk. We perform X-ray tomography using the changes in pulse profiles to model the geometry and kinematics of the inner accretion disk. Our simple beam and inner disk geometric model indicates that the long term changes in soft pulse shape and phase are consistent with reprocessed emission from a precessing inner disk.

Brumback, McKinley C.↗

First look at the Fomalhaut debris disk with the Spitzer Space Telescope

We present Spitzer Space Telescope early release observations of Fomalhaut, a nearby A-type star with dusty circumstellar debris. The disk is spatially resolved at 24, 70, and 160 mu m using the Multiband Imaging Photometer for Spitzer (MIPS). While the disk orientation and outer radius are comparable to values measured in the submillimeter, the disk inner radius cannot be precisely defined: the central hole in the submillimeter ring is at least partially filled with emission from warm dust, seen in Spitzer Infrared Spectrograph (IRS)17.5-34 mu m spectra and MIPS 24 mu m images. The disk surface brightness becomes increasingly asymmetric toward shorter wavelengths, with the south-southeast ansa always brighter than the north-northwest one. This asymmetry may reflect perturbations on the disk by an unseen interior planet.

Young, E. T.↗

The First Swift Intensive AGN Accretion Disk Reverberation Mapping Survey

Swift intensive accretion disk reverberation mapping of four AGN yielded light curves sampled ∼200–350 times in 0.3–10 keV X-ray and six UV/optical bands. Uniform reduction and cross-correlation analysis of these data sets yields three main results: (1) The X-ray/UV correlations are much weaker than those within the UV/optical, posing severe problems for the lamp-post reprocessing model in which variations in a central X-ray corona drive and power those in the surrounding accretion disk. (2) The UV/optical interband lags are generally consistent with t μ l4 3 as predicted by the centrally illuminated thin accretion disk model. While the average interband lags are somewhat larger than predicted, these results alone are not inconsistent with the thin disk model given the large systematic uncertainties involved. (3) The one exception is the U band lags, which are on average a factor of ∼2.2 larger than predicted from the surrounding band data and fits. This excess appears to be due to diffuse continuum emission from the broad-line region (BLR). The precise mixing of disk and BLR components cannot be determined from these data alone. The lags in different AGN appear to scale with mass or luminosity. We also find that there are systematic differences between the uncertainties derived by JAVELIN versus more standard lag measurement techniques, with JAVELIN reporting smaller uncertainties by a factor of 2.5 on average. In order to be conservative only standard techniques were used in the analyses reported herein.

R. Edelson↗

Circumbinary Disk Accretion into Spinning Black Hole Binaries

Supermassive black hole binaries are likely to accrete interstellar gas through a circumbinary disk. Shortly before merger, the inner portions of this circumbinary disk are subject to general relativistic effects. To study this regime, we approximate the spacetime metric of close orbiting black holes by superimposing two boosted Kerr–Schild terms. After demonstrating the quality of this approximation, we carry out very long-term general relativistic magnetohydrodynamic simulations of the circumbinary disk. We consider black holes with spin dimensionless parameters of magnitude 0.9, in one simulation parallel to the orbital angular momentum of the binary, but in another anti-parallel. These are contrasted with spinless simulations. We find that, for a fixed surface mass density in the inner circumbinary disk, aligned spins of this magnitude approximately reduce the mass accretion rate by 14% and counter-aligned spins increase it by 45%, leaving many other disk properties unchanged.

AGN↗

Origami-Inspired Optical Shield for a Starshade Inner Disk Testbed: Design, Fabrication, and Analysis

In 2019, a 10 m-diameter starshade inner disk test article was assembled; this test article demonstrated deployment accuracy sufficient for starshade mission concepts. Here, we describe the design, fabrication, and computational structural analysis of a key inner disk component realized for this effort: the origami-folded optical shield. The optical shield is a 10 m-diameter lightweight cover that makes the inner disk opaque. It stows within a 2.3 m-diameter volume by using an origami-inspired wrapping pattern, and is deployed passively by the inner disk perimeter truss. The fold pattern was generated by a custom algorithm based one existing generative design approaches. This prototype demonstrated critical functions: stowage in a compact volume, static equilibrium when stowed and deployed, and low strain when stowed. Four separate computational structural analysis models of the optical shield were de- veloped, at varying levels of fidelity and using a variety of software solutions: Abaqus, RAPID, and ADAMS. These models were intended to pathfind approaches for modeling the stowage and deployment of the inner disk, and to demonstrate that the optical shield is amenable existing structural modeling approaches. These models were found to adequately capture pertinent stowage and deployment behavior of the optical shield prototype.

Hoffman, Laura↗

Chandra Observations of Six Peter Pan Disks: Diversity of X-Ray-driven Internal Photoevaporation Rates Does Not Explain Their Rare Longevity

We present Chandra X-ray observations of six previously identified Peter Pan objects, rare ∼40 Myr systems with evidence of primordial disk retention. We observe X-ray luminosities (0.8–3.0 keV) ranging from log Lx ∼ 27.7–29.1. We find that our Peter Pan sample exhibits X-ray properties similar to that of weak-lined T Tauri stars and do not exhibit evidence of stellar accretion induced X-ray suppression. Our observed Peter Pan X-ray luminosities are consistent with that measured for field dM stars of similar spectral type and age, implying their long primordial disk lifetimes are likely not a consequence of unusually faint X-ray host stars. Our derived X-ray photoevaporative mass-loss rates predict our systems have passed the point of rapid gas dispersal and call into question the impact of this internal mechanism for primordial disk dispersal around dM stars. Our qualitative assessment of the surrounding Peter Pan environments also does not predict unusually low levels of external photoevaporation relative to other respective moving group members. Overall, our results suggest Peter Pan disks may be a consequence of the low far-UV flux incident on the disk in low-mass dM stars given their relatively lower levels of accretion over the course of their pre-main-sequence evolution.

Stefan Laos↗

Vertical Structure of Gas and Dust in Four Debris Disks

We present high-spectral-resolution M-band spectra from iSHELL on NASA’s Infrared Telescope Facility along the line of sight to the debris disk host star HD 32297. We also present a Gemini Planet Imager H-band polarimetric image of the HD 131488 debris disk. We search for fundamental CO absorption lines in the iSHELL spectra of HD 32297, but do not detect any. We place an upper limit on the CO column density of ∼6×1015cm−2. By combining the column density upper limit, the CO mass measured with the Atacama Large Millimeter/submillimeter Array (ALMA), and the geometrical properties of the disk, we estimate the scale height of the CO to be 2au across the radial extent of the disk (∼80–120au). We use the same method to estimate the CO scale height of three other edge-on, CO-rich debris disks that all have CO observed in absorption with the Hubble Space Telescope as well as in emission with ALMA: β Pictoris, HD 110058, and HD 131488. We compare our estimated CO scale heights of these four systems to the millimeter dust scale heights and find that, under the assumption of hydrostatic equilibrium, there is a potential correlation between the CO and millimeter dust scale heights. There are multiple factors that affect the gas vertical structure such as turbulence, photodissociation with weak vertical mixing, as well as where the gas originates. One possible explanation for the potential correlation could be that the gas and dust are of a similar secondary origin in these four systems.

Kadin Worthen↗

Characterization of irradiated AISI 316L stainless steel disks removed from the Spallation Neutron Source

Irradiated AISI 316L stainless steel disks were removed from the Spallation Neutron Source (SNS) for post-irradiation examination (PIE) to assess mechanical property changes due to radiation damage and erosion of the target vessel. Topics reviewed include high-resolution photography of the disk specimens, cleaning to remove mercury (Hg) residue and surface oxides, profile mapping of cavitation pits using high frequency ultrasonic testing (UT), high-resolution surface replication, and machining of test specimens using wire electrical discharge machining (EDM), tensile testing, Rockwell Superficial hardness testing, Vickers microhardness testing, scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS). The effectiveness of the cleaning procedure was evident in the pre- and post-cleaning photography and permitted accurate placement of the test specimens on the disks. Due to the limited amount of material available and the unique geometry of the disks, machine fixturing and test specimen design were critical aspects of this work. Multiple designs were considered and refined during mock-up test runs on unirradiated disks. The techniques used to successfully machine and test the various specimens will be presented along with a summary of important findings from the laboratory examinations.

cavitation-induced erosion↗

Compressed video camera with a moving patterned disk

A high-speed video system is disclosed that includes a moving image absorbing disk at an image plane. The disk has a pattern that passes and blocks image data. The disk is located between an event and an image sensor, or reflects an image to the image sensor. The disk is rotated at a speed that matches the desired reconstructed image frame rate. The image sensor frame data is processed using image reconstruction techniques, such as the D-AMP or TWIST algorithm, to recover a time sequence of reconstructed images. Additional images can be reconstructed for each image sensor frame if some spatial resolution is sacrificed. For continuous video, the disk speed is adjusted to the sensor frame rate. For burst mode, a single sensor image is acquired and a short image sequence is reconstructed. This image capture system works with a variety of radiations, including infrared, light, UV and X-rays.

42 ENGINEERING↗

Investigations of Air-cooled Turbine Rotors for Turbojet Engines II : Mechanical Design, Stress Analysis, and Burst Test of Modified J33 Split-disk Rotor / Richard H. Kemp and Merland L. Moseson

A full-scale J33 air-cooled split turbine rotor was designed and spin-pit tested to destruction. Stress analysis and spin-pit results indicated that the rotor in a J33 turbojet engine, however, showed that the rear disk of the rotor operated at temperatures substantially higher than the forward disk. An extension of the stress analysis to include the temperature difference between the two disks indicated that engine modifications are required to permit operation of the two disks at more nearly the same temperature level.

TURBINES - WHEELS, DISK - STRENGTH↗

Single-point parallel disk correction for asymptotically nonlinear oscillatory shear

We derive exact single-point corrections for parallel disk measurements of all four asymptotically nonlinear measures under strain-controlled oscillatory shear. In this regime, sometimes called medium-amplitude oscillatory shear (MAOS), the derivatives appearing in the general stress correction are constant over the range of interest. This enables an exact single-point correction of all four shear stress components and material functions in the asymptotically nonlinear regime. This greatly simplifies the data processing and allows convenient measurements of true nonlinear material functions with parallel disk geometries. We use a strain amplitude expansion for the stress response, introducing a general non-integer strain amplitude scaling for the leading order nonlinearity, σ ~ γ α , where typically α = 3 has been assumed in the past. The stress corrections are a multiplicative amplification by a factor f(α) = α+3/4, shown for the first time for all four asymptotically nonlinear coefficients. Experimental measurements are presented for the four asymptotically nonlinear signals on an entangled polymer melt of cis-1,4-polyisoprene, using both parallel disk and cone fixtures. The polymer melt follows a cubic (α = 3) strain amplitude scaling in the MAOS regime. Furthermore, the theoretical corrections indicate a 50 % amplification of the apparent signals measured with the parallel disk fixture. The corrected (amplified) signals match the measurements with the cone.

42 ENGINEERING↗

Process intensification in a spinning disk absorber for absorption heat pumps

Absorption heat pumps are often an efficient machine for recovering of low-grade waste heat to cooling applications. However, they suffer from slow transfer processes and consequently large equipment size. This paper presents an experimental investigation of a novel absorber that utilizes a combination of a spinning disk and manifold-microchannel technology to intensify the absorption process. The rotation of the disk improves solution-side absorption performance, while an adaption of manifold-microchannel technology provides water-side enhancement. The enhanced spinning disk absorber was tested in an experimental setup using aqueous lithium bromide as the working fluid. Experimental results are compared with key performance metrics reported in the existing literature. The overall heat transfer increased by a factor of 4.7, and absorption rate increased by a factor of 4 to 10 folds over those in conventional tube absorbers. The results suggest that the spinning disk reactor could substantially reduce the size of absorber in the absorption machines. Better thermal and mass transfer performance can also enable air cooling with higher heat sink temperature than the one available through cooling towers.

42 ENGINEERING↗

High-Frequency QPOs as a Product of Inner Disk Dynamics around Neutron Stars

The kHz QPOs observed in a neutron star low mass X-ray binary are likely to be produced in the innermost regions of accretion disk around the neutron star. The rotational dynamics of the inner disk can be characterized by the presence of either sub-Keplerian or super-Keplerian accretion flow depending on the relative fastness of the neutron spin as compared to the Keplerian frequency at the inner disk radius. Within the magnetosphere-disk interaction model, the frequency difference between the two kHz QPOs observed in a given source can be estimated to be slightly higher than or nearly around the neutron star spin frequency if the neutron star is a slow rotator and less than the stellar spin frequency if the neutron star is a fast rotator.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Thermal modeling of head disk interface system in heat assisted magnetic recording

A thorough understanding of the temperature profiles introduced by the heat assisted magnetic recording is required to maintain the hotspot at the desired location on the disk with minimal heat damage to other components. Here, we implement a transient mesoscale modeling methodology termed lattice Boltzmann method (LBM) for phonons (which are primary carriers of energy) in the thermal modeling of the head disk interface (HDI) components, namely, carbon overcoat (COC). The LBM can provide more accurate results compared to conventional Fourier methodology by capturing the nanoscale phenomena due to ballistic heat transfer. We examine the in-plane and out-of-plane heat transfer in the COC via analyzing the temperature profiles with a continuously focused and pulsed laser beam on a moving disk. Larger in-plane hotspot widening is observed in continuously focused laser beam compared to a pulsed laser. A pulsed laser surface develops steeper temperature gradients compared to continuous hotspot. Furthermore, out-of-plane heat transfer from the COC to the media is enhanced with a continuous laser beam then a pulsed laser, while the temperature takes around 140 fs to reach the bottom surface of the COC. Our study can lead to a realistic thermal model describing novel HDI material design criteria for the next generation of hard disk drives with ultra high recording densities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Periodicity of the solar full-disk magnetic fields

A full-disk solar magnetogram has been measured each day since 1970 January 19, and the daily Magnetic Plage Strength Index (MPSI) and the daily Mount Wilson Sunspot Index (MWSI) were calculated for each magnetogram at the Mount Wilson Observatory. The MPSI and MWSI are used to investigate the periodicity of the solar full-disk magnetic activity through autocorrelation analyses. Just two periods, the solar cycle and the rotation cycle, are determined in both the MPSI (the solar full-disk weak magnetic field activity) and MWSI (the solar full-disk strong magnetic field activity) with no annual signal found. The solar cycle for MPSI (10.83 yr) is found to be obviously longer than that for MWSI (9.77 yr). The rotation cycle is determined to be 26.8 ± 0.63 sidereal days for MPSI and 27.4 ± 2.4 sidereal days for MWSI. The rotation cycle length for MPSI is found to fluctuate around 27 days within a very small amplitude, but for MWSI it obviously temporally varies with a rather large amplitude. The rotation cycle for MWSI seems longer near solar minimum than at solar maximum. Cross-correlation analyses of daily MPSI and MWSI are carried out, and it is inferred that the MPSI components partly come from relatively early MWSI measurements.

79 ASTRONOMY AND ASTROPHYSICS↗