Search NASA⌕ Search

SEARCH · Search NASA

Results for “experimental data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Comparison of predicted and measured low-speed performance of two 51 centimeter-diameter inlets at incidence angle

Theoretical and experimental internal flow characteristics of two 51-cm-diameter inlets are compared. Theoretical flow characteristics along the inlet surface were obtained from an axisymmetric potential flow and boundary layer analysis. The experimental data were obtained from low-speed tests of a high-bypass-ratio turbofan engine simulator. Comparisons between calculated internal surface pressure distributions and experimental data are presented for a free-system velocity of 45 m/sec and for incidence angles from 0 deg to 50 deg. Analysis of boundary layer separation on the inlet lip at incidence angle is the major emphasis of this report. Theoretical boundary layer shape factors, skin friction coefficients, and velocity profiles in the boundary layer are presented, along with the location of the transition region. Theoretical and experimental separation locations are also discussed.

Albers, J. A.↗

Effect of wind tunnel acoustic modes on linear oscillating cascade aerodynamics

The aerodynamics of a biconvex airfoil cascade oscillating in torsion is investigated using the unsteady aerodynamic influence coefficient technique. For subsonic flow and reduced frequencies as large as 0.9, airfoil surface unsteady pressures resulting from oscillation of one of the airfoils are measured using flush-mounted high-frequency-response pressure transducers. The influence coefficient data are examined in detail and then used to predict the unsteady aerodynamics of a cascade oscillating at various interblade phase angles. These results are correlated with experimental data obtained in the traveling-wave mode of oscillation and linearized analysis predictions. It is found that the unsteady pressure disturbances created by an oscillating airfoil excite wind tunnel acoustic modes which have detrimental effects on the experimental data. Acoustic treatment is proposed to rectify this problem.

Buffum, Daniel H.↗

Nonnegative tensor decomposition with custom clustering for microphase separation of block copolymers

High–dimensional datasets are becoming ubiquitous in many applications and therefore unsupervised tensor methods to interrogate them are needed. Here, we report a new unsupervised machine learning (ML) approach (NTFk) based on nonnegative tensor factorization integrated with a custom k–means clustering. We demonstrate the ability of NTFk to extracting temporal and spatial features of phase separation of copolymers as they are modeled by self–consistent field theory. Microphase separation of block copolymers has been extensively studied both experimentally and theoretically. However, the interpretation of computer simulations and/or experimental data, representing temporal and spatial changes of molecular species concentration is still a challenging task. Thus, extracting the phase diagram from simulations or experimental data as well as the interpretation of data requires discernment of the model/experimental parameters (such as, temperature, concentrations, the number of molecular species and the interaction between species) impact on the microphase separation process. An attractive and unique aspect of the introduced ML method is that it ensures the nonnegativity of the extracted latent features. Nonnegativity is an essential constraint needed to obtain interpretable and sparse latent features that are parts–based representation of the data. The custom clustering in NTFk serves to estimate the number of latent features in the data.

97 MATHEMATICS AND COMPUTING↗

Implementation and verification of PyNE R2S with DAG-OpenMC

The mesh-based Rigorous-Two-Step (R2S) method has been widely used in the accurate estimation of the shutdown dose rate (SDR) of fusion systems. Several mesh-based R2S code has been implemented based on Monte Carlo particle transport code MCNP5 or DAG-MCNP5 and inventory calculation code such as FISPACT-II, ALARA or ACAB. Recently, the OpenMC, a community-developed Monte Carlo particle transport code, implemented the photon particle transport capability, which enables OpenMC to be used in R2S. In this paper, PyNE R2S is extended with the support of DAG-OpenMC, i.e., OpenMC with DAGMC. Modifications that allow PyNE to read the flux result in the state point file of OpenMC has been implemented to PyNE R2S workflow. A custom source routine of OpenMC that reads the photon source file from PyNE R2S and sampling photon particle in OpenMC photon transport has been implemented in OpenMC. With these modifications, PyNE R2S is now capable of performing R2S calculations with both DAG-MCNP5 and DAG-OpenMC. The ITER FNG dose rate benchmark problem has been used to validate the code. The FNG neutron source has been modified for neutron transport with DAG-OpenMC. The shutdown dose rate of 19 cooling times has been calculated and compared with the experimental data and the computational results of other R2S codes. The results of PyNE R2S with DAG-OpenMC show satisfactory agreement with the experimental data and other computational results. Therefore, we consider PyNE R2S with DAG-OpenMC is a reliable code to calculate the SDR of fusion systems.

fusion↗

Chemically authentic surrogate mixture model for the thermophysical properties of a coal-derived liquid fuel

We developed a surrogate mixture model to represent the physical properties of a coal-derived liquid fuel using only information obtained from a gas chromatography-mass spectrometry analysis of the fuel and a recently developed 'advanced distillation curve'. We then predicted the density, speed of sound, and viscosity of the fuel and compared them to limited experimental data. The surrogate contains five components (n-propylcyclohexane, trans-decalin, {alpha}-methyldecalin, bicyclohexane, and n-hexadecane), yet comparisons to limited experimental data demonstrate that the model is able to represent the density, sound speed, and viscosity to within 1, 4, and 5%, respectively. 102 refs., 2 figs., 5 tabs.

01 COAL, LIGNITE, AND PEAT↗

Practical uncertainty reduction and quantification in shock physics measurements

We report the development of a simple error analysis sampling method for identifying intersections and inflection points to reduce total uncertainty in experimental data. This technique was used to reduce uncertainties in sound speed measurements by 80% over conventional methods. Here, we focused on its impact on a previously published set of Mo sound speed data and possible implications for phase transition and geophysical studies. However, this technique's application can be extended to a wide range of experimental data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Theoretical and experimental studies of electric field distribution in N-polar GaN/AlGaN/GaN heterostructures

Electric field distribution in N-polar GaN(channel)/AlGaN/GaN(buffer) heterostructures was studied theoretically by solving Schrodinger and Poisson equations in a self-consistent manner for various boundary conditions and comparing results of these calculations with experimental data, i.e., measurements of electric field in GaN(channel) and AlGaN layers by electromodulation spectroscopy. A very good agreement between theoretical calculations and experimental data has been found for the Fermi-level located at ∼0.3 eV below the conduction band at N-polar GaN surface. With this surface boundary condition, the electric field distribution and two dimensional electron gas concentration are determined for GaN(channel)/AlGaN/GaN(buffer) heterostructures of various thicknesses of GaN(channel) and AlGaN layers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Role of fourth-order phase-space moments in collective modes of trapped Fermi gases

We study the transition from hydrodynamic to collisionless behavior in collective modes of ultracold trapped Fermi gases. To that end, we solve the Boltzmann equation for the trapped Fermi gas via the moments method. We showed previously that it is necessary to go beyond second-order moments if one wants to reproduce the results of a numerical solution of the Boltzmann equation. Here, we will give the detailed description of the method including fourth-order moments. We apply this method to the case of realistic parameters, and compare the results for the radial quadrupole and scissors modes at unitarity to experimental data obtained by the Innsbruck group. It turns out that the inclusion of fourth-order moments clearly improves the agreement with the experimental data. In particular, the fourth-order moments reduce the effect of collisions and therefore partially compensate the effect of the enhanced in-medium cross section at low temperatures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigation of the isoscalar response of 24 Mg to 6 Li scattering

24 Mg is a strongly deformed nucleus in the ground state. Deformation effects can be observed in the structure of the isoscalar giant monopole and quadrupole resonances. 24 Mg is also a nucleus that is well known to present different types of cluster-oscillation modes. Both giant resonances and cluster states are strongly populated by isoscalar transitions. To extract the E0, E1, and E2 transition strengths via 6 Li scattering. The 6 Li probe is a powerful tool for investigating the isoscalar nuclear response with a very favorable ratio of resonance-to-continuum background. Double-differential cross sections of 6 Li inelastic scattering, at the beam energy of 100 MeV/u, were measured in the excitation-energy range 10 – 40 MeV and scattering angles 0 - 3°. A multipole-decomposition analysis was performed for extracting the isoscalar E0 , E1, and E2 strength distributions. Results: The extracted multipole strengths were compared with predictions from consistent quasiparticle random phase approximation calculations. The theoretical predictions are in fair agreement with the experimental data. The E0 strength was also compared with results from antisymmetrized molecular dynamics calculations found in the literature. A few peaks in the experimental data might be associated with clustering in 24 Mg. Ground-state deformation effects were observed in the isoscalar giant monopole resonance (ISGMR) and isoscalar giant quadrupole resonance (ISGQR) distributions. The ISGMR strength is split in two peaks around 19 and 28 MeV. The ISGQR exhibits a pronounced peak at 20 MeV with a broadening at the low-energy region, similar to predictions from microscopic calculations. Signatures of excitation of cluster states were observed in the E0 response. Further studies including particle-decay measurements will be required to confirm the nature of the observed peaks.

20 ≤ A ≤ 38↗

Isospin mixing and the cubic isobaric multiplet mass equation in the lowest T=2, A=32 quintet

The isobaric multiplet mass equation (IMME) is known to break down in the first T=2,A=32 isospin quintet. In this work we combine high-resolution experimental data with state-of-the-art shell-model calculations to investigate isospin mixing as a possible cause for this violation. The experimental data are used to validate isospin-mixing matrix elements calculated with newly developed shell-model Hamiltonians. Our analysis shows that isospin mixing with nonanalog T=1 states contributes to the IMME breakdown, making the requirement of an anomalous cubic term inevitable for the multiplet.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Prediction for the mass spectra of resonance mesons in the soft-wall AdS/QCD model with a modified 5D metric

A soft-wall anti-de Sitter/QCD model with a modified five-dimensional metric at the infrared region is constructed to obtain a nontrivial dilaton solution, which incorporates the chiral symmetry breaking and linear confinement. By taking the pion mass and decay constant as two input mass scales, the resulting predictions for the resonance states of pseudoscalar, scalar, vector, and axial-vector mesons agree remarkably with the experimentally confirmed resonance states. The effects of the quartic interaction term are investigated by taking an appropriate sign and magnitude for maintaining the stability of the bulk scalar potential. It is shown that such a simply modified soft-wall anti-de Sitter/QCD model can lead to a consistent prediction for the mass spectra of resonance states in the pseudoscalar, scalar, vector, and axial-vector mesons; the agreement with the experimental data is found to be better than 10% for the excited meson states. The resulting pion form factor also agrees well with the experimental data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

HILL: The High-Intensity Laser Laboratory Core Team's Reply to Questions from the NNSA Experimental Facilities Panel

Question 1 - The type of physics regimes that HILL can access for weapons studies is quite interesting. The question that arises for the proposal team is what priority does this type of experimental data have versus data that can be obtained with NIF, and Z. How does HILL rank in priority compared to MARIE 1.0 in terms of the experimental data it will provide? We reiterate that isochoric heating experiments to be conducted with HILL are complementary to the high energy density physics experiments at NIF and Z and uniquely access states of matter that neither other facility can access. It is our belief that HILL will enable several important questions, e.g., as related to mix morphology, radiation transfer from corrugated surfaces, and equations of state, to be run to ground through carefully diagnosed, 'unit-physics' experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Utilizing Soize's Approach to Identify Parameter and Model Uncertainties

Quantifying uncertainty in model parameters is a challenging task for analysts. Soize has derived a method that is able to characterize both model and parameter uncertainty independently. This method is explained with the assumption that some experimental data is available, and is divided into seven steps. Monte Carlo analyses are performed to select the optimal dispersion variable to match the experimental data. Along with the nominal approach, an alternative distribution can be used along with corrections that can be utilized to expand the scope of this method. This method is one of a very few methods that can quantify uncertainty in the model form independently of the input parameters. Two examples are provided to illustrate the methodology, and example code is provided in the Appendix.

97 MATHEMATICS AND COMPUTING↗

Thermal Contact Conductance Modeling

Elastic, plastic and elastic-plastic thermal conductance models were run for Al-6061 and SS-304, respectively. Thermal conductance models were compared to experimental data of samples being pressed together as a function of contact pressure. For SS-304, Elastic and Plastic models did not fit the experimental data well. The Elastic-Plastic model fit the data well and it was shown that surface roughness did not play a major role. For Al-6061, the Elastic model worked best and the models strongly suggested that surface roughness Al plays an important role in how well a thermal conductance model can predict conductance through two pieces of Al in contact with one another.

36 MATERIALS SCIENCE↗

Compressor is A Sensor (Final Report)

The performance of the heat pump system varies greatly depending on the refrigerant charge amount. Improving the refrigerant charge fault detection and diagnostics (FDD) method of vapor compression systems have the potential for increasing energy efficiency and reducing service cost. Previous studies to predict refrigerant charge amount are mostly empirical methods which require significant amount of experimental data for high accuracy. The primary goal of this research is to develop a charge fault detection method which requires only a few experimental data with high prediction accuracy.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Direct simulation of high-speed mixing layers

A computational study of a nonreacting high-speed mixing layer is performed. A higher order algorithm with sufficient grid points is used to resolve all relevant scales. In all cases, a temporal free-stream disturbance is introduced. The resulting flow is time-sampled to generate a statistical cross section of the flow properties. The studies are conducted at two convective Mach numbers, three free-stream turbulence intensities, three Reynolds numbers, and two types of initial profiles-hyperbolic tangent (tanh) and boundary layer. The boundary-layer profile leads to more realistic predictions of the transition processes. The predicted transition Reynolds number of 0.18 x 10(exp 6) compares well with experimental data. Normalized vortex spacings for the boundary-layer case are about 3.5 and compare favorably with the 1.5 to 2.5 found in experimental measurements. The tanh profile produces spacings of about 10. The growth rate of the layer is shown to be moderately affected by the initial disturbance field, but comparison with experimental data shows moderate agreement. For the boundary-layer case, it is shown that noise at the Strouhal number of 0.007 is selectively amplified and shows little Reynolds number dependence.

Mukunda, H. S.↗

Sonic boom predictions using a modified Euler code

The environmental impact of a next generation fleet of high-speed civil transports (HSCT) is of great concern in the evaluation of the commercial development of such a transport. One of the potential environmental impacts of a high speed civilian transport is the sonic boom generated by the aircraft and its effects on the population, wildlife, and structures in the vicinity of its flight path. If an HSCT aircraft is restricted from flying overland routes due to excessive booms, the commercial feasibility of such a venture may be questionable. NASA has taken the lead in evaluating and resolving the issues surrounding the development of a high speed civilian transport through its High-Speed Research Program (HSRP). The present paper discusses the usage of a Computational Fluid Dynamics (CFD) nonlinear code in predicting the pressure signature and ultimately the sonic boom generated by a high speed civilian transport. NASA had designed, built, and wind tunnel tested two low boom configurations for flight at Mach 2 and Mach 3. Experimental data was taken at several distances from these models up to a body length from the axis of the aircraft. The near field experimental data serves as a test bed for computational fluid dynamic codes in evaluating their accuracy and reliability for predicting the behavior of future HSCT designs. Sonic boom prediction methodology exists which is based on modified linear theory. These methods can be used reliably if near field signatures are available at distances from the aircraft where nonlinear and three dimensional effects have diminished in importance. Up to the present time, the only reliable method to obtain this data was via the wind tunnel with costly model construction and testing. It is the intent of the present paper to apply a modified three dimensional Euler code to predict the near field signatures of the two low boom configurations recently tested by NASA.

Siclari, Michael J.↗

Interactions Between Ground-State Nitrogen Atoms and Molecules

Potential-energy curves for nitrogen atom (N-N) interactions corresponding to the X (1)Sigma(sup +, sub g), A (3)Sigma(sup +, sub u), (5)Sigma(sup +, sub g), (7)Sigma(sup +, sub u), B (3) Pi(sub g), C (3)(Pi(su u)and a (1)Pi(sub g) states of the nitrogen molecule N2 as well as curves for the atom-molecules (N-N2) and molecule-molecule (N2-N2) interactions have been calculated. All calculations have been based as nearly as possible on experimental data, including spectroscopically determined vibrational energy levels, scattering cross sections of atomic beams in gases, and measured vibrational relaxation times. In cases where experimental data were not available, approximate quantum-mechanical calculations have been made. Results obtained by these various methods are remarkably consistent with one another and are believed to have good accuracy.

Vanderslice, Joseph T.↗