Search NASA⌕ Search

SEARCH · Search NASA

Results for “harmonic analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Frequency domain model for analysis of paralleled, series-output-connected Mapham inverters

The Mapham resonant inverter is characterized as a two-port network driven by a selected periodic voltage. The two-port model is then used to model a pair of Mapham inverters connected in series and employing phasor voltage regulation. It is shown that the model is useful for predicting power output in paralleled inverter units, and for predicting harmonic current output of inverter pairs, using standard power flow techniques. Some sample results are compared to data obtained from testing hardware inverters.

Brush, Andrew S.↗

Runge-Kutta methods combined with compact difference schemes for the unsteady Euler equations

Recent development using compact difference schemes to solve the Navier-Stokes equations show spectral-like accuracy. A study was made of the numerical characteristics of various combinations of the Runge-Kutta (RK) methods and compact difference schemes to calculate the unsteady Euler equations. The accuracy of finite difference schemes is assessed based on the evaluations of dissipative error. The objectives are reducing the numerical damping and, at the same time, preserving numerical stability. While this approach has tremendous success solving steady flows, numerical characteristics of unsteady calculations remain largely unclear. For unsteady flows, in addition to the dissipative errors, phase velocity and harmonic content of the numerical results are of concern. As a result of the discretization procedure, the simulated unsteady flow motions actually propagate in a dispersive numerical medium. Consequently, the dispersion characteristics of the numerical schemes which relate the phase velocity and wave number may greatly impact the numerical accuracy. The aim is to assess the numerical accuracy of the simulated results. To this end, the Fourier analysis is to provide the dispersive correlations of various numerical schemes. First, a detailed investigation of the existing RK methods is carried out. A generalized form of an N-step RK method is derived. With this generalized form, the criteria are derived for the three and four-step RK methods to be third and fourth-order time accurate for the non-linear equations, e.g., flow equations. These criteria are then applied to commonly used RK methods such as Jameson's 3-step and 4-step schemes and Wray's algorithm to identify the accuracy of the methods. For the spatial discretization, compact difference schemes are presented. The schemes are formulated in the operator-type to render themselves suitable for the Fourier analyses. The performance of the numerical methods is shown by numerical examples. These examples are detailed. described. The third case is a two-dimensional simulation of a Lamb vortex in an uniform flow. This calculation provides a realistic assessment of various finite difference schemes in terms of the conservation of the vortex strength and the harmonic content after travelling a substantial distance. The numerical implementation of Giles' non-refelctive equations coupled with the characteristic equations as the boundary condition is discussed in detail. Finally, the single vortex calculation is extended to simulate vortex pairing. For the distance between two vortices less than a threshold value, numerical results show crisp resolution of the vortex merging.

Yu, Sheng-Tao↗

Investigation of local thermodynamic equilibrium of laser induced Al{sub 2}O{sub 3}–TiC plasma in argon by spatially resolved optical emission spectroscopy

Plasma plume of Al{sub 2}O{sub 3}–TiC is generated by third harmonic Q-switched Nd:YAG nanosecond laser. It is characterized using Optical Emission Spectroscopy (OES) at different argon background gas pressures 10, 10{sup 2}, 10{sup 3}, 10{sup 4} and 10{sup 5} Pa. Spatial evolution of excitation and ionic temperatures is deduced from spectral data analysis. Temporal evolution of Ti I emission originated from different energy states is probed. The correlation between the temporal behavior and the spatial temperature evolution are investigated under LTE condition for the possibility to use the temporal profile of Ti I emission as an indicator for LTE validity in the plasma.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transition of a network of nonlinear interactions into a regime of strong nonlinear fluctuations: A paradigm for the edge localized mode onset

We study how a network of nonlinear oscillators transits into a regime of strong nonlinear fluctuations when perturbed by a triad. In this regime, most of the potential energy contained in the waves is made available to the system through strong nonlinear fluctuations. This analysis is motivated by recent experimental observations [Dominski and Diallo, Plasma Phys. Control. Fusion 62, 095011 (2020)] where it was found that magnetic fluctuations trigger the onset of edge localized modes by suddenly exciting a network of nonlinear interactions. In our study, we consider the simplest system of many harmonic oscillators that are organized in a network of nonlinear triads. We model and simulate the sudden transition of this network of triads into a regime of strong nonlinear fluctuations—reminiscent of the onset of edge localized modes in tokamaks. This transition is triggered by the activation of a nonlinear perturbation. An abrupt rise of the system's disorder (an entropy-like quantity) is measured during the transition. This transition from weak to strong nonlinear fluctuations is even more abrupt when these fluctuations are chaotic, i.e., when the timescale of the nonlinear interaction is comparable to the timescale of the wave oscillations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SEISMIC CONSTRAINTS ON INTERIOR SOLAR CONVECTION

We constrain the velocity spectral distribution of global-scale solar convective cells at depth using techniques of local helioseismology. We calibrate the sensitivity of helioseismic waves to large-scale convective cells in the interior by analyzing simulations of waves propagating through a velocity snapshot of global solar convection via methods of time-distance helioseismology. Applying identical analysis techniques to observations of the Sun, we are able to bound from above the magnitudes of solar convective cells as a function of spatial convective scale. We find that convection at a depth of r/R {sub sun} = 0.95 with spatial extent l < 20, where l is the spherical harmonic degree, comprises weak flow systems, on the order of 15 m s{sup -1} or less. Convective features deeper than r/R {sub sun} = 0.95 are more difficult to image due to the rapidly decreasing sensitivity of helioseismic waves.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cross-correlating 2D and 3D galaxy surveys

Galaxy surveys probe both structure formation and the expansion rate, making them promising avenues for understanding the dark universe. Photometric surveys accurately map the 2D distribution of galaxy positions and shapes in a given redshift range, while spectroscopic surveys provide sparser 3D maps of the galaxy distribution. We present a way to analyse overlapping 2D and 3D maps jointly and without loss of information. We represent 3D maps using spherical Fourier-Bessel (sFB) modes, which preserve radial coverage while accounting for the spherical sky geometry, and we decompose 2D maps in a spherical harmonic basis. In these bases, a simple expression exists for the cross-correlation of the two fields. One very powerful application is the ability to simultaneously constrain the redshift distribution of the photometric sample, the sample biases, and cosmological parameters. We use our framework to show that combined analysis of DESI and LSST can improve cosmological constraints by factors of ${\sim}1.2$ to ${\sim}1.8$ on the region where they overlap relative to identically sized disjoint regions. We also show that in the overlap of DES and SDSS-III in Stripe 82, cross-correlating improves photo-$z$ parameter constraints by factors of ${\sim}2$ to ${\sim}12$ over internal photo-$z$ reconstructions.

79 ASTRONOMY AND ASTROPHYSICS↗

Stable Bloch Oscillations of Cold Atoms with Time-Dependent Interaction

We investigate Bloch oscillations of interacting cold atoms in a mean-field framework. In general, atom-atom interaction causes dephasing and destroys Bloch oscillations. Here we show that Bloch oscillations are persistent if the interaction is modulated harmonically with suitable frequency and phase. For other modulations, Bloch oscillations are rapidly damped. We explain this behavior in terms of collective coordinates whose Hamiltonian dynamics permits one to predict a whole family of stable solutions. In order to describe also the unstable cases, we carry out a stability analysis for Bogoliubov excitations. Using Floquet theory, we are able to predict the unstable modes as well as their growth rate, found to be in excellent agreement with numerical simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Life Cycle Greenhouse Gas Emissions of Nuclear Electricity Generation: Systematic Review and Harmonization

A systematic review and harmonization of life cycle assessment (LCA) literature of nuclear electricity generation technologies was performed to determine causes of and, where possible, reduce variability in estimates of life cycle greenhouse gas (GHG) emissions to clarify the state of knowledge and inform decision making. LCA literature indicates that life cycle GHG emissions from nuclear power are a fraction of traditional fossil sources, but the conditions and assumptions under which nuclear power are deployed can have a significant impact on the magnitude of life cycle GHG emissions relative to renewable technologies. Screening 274 references yielded 27 that reported 99 independent estimates of life cycle GHG emissions from light water reactors (LWRs). The published median, interquartile range (IQR), and range for the pool of LWR life cycle GHG emission estimates were 13, 23, and 220 grams of carbon dioxide equivalent per kilowatt-hour (g CO{sub 2}-eq/kWh), respectively. After harmonizing methods to use consistent gross system boundaries and values for several important system parameters, the same statistics were 12, 17, and 110 g CO{sub 2}-eq/kWh, respectively. Harmonization (especially of performance characteristics) clarifies the estimation of central tendency and variability. To explain the remaining variability, several additional, highly influential consequential factors were examined using other methods. These factors included the primary source energy mix, uranium ore grade, and the selected LCA method. For example, a scenario analysis of future global nuclear development examined the effects of a decreasing global uranium market-average ore grade on life cycle GHG emissions. Depending on conditions, median life cycle GHG emissions could be 9 to 110 g CO{sub 2}-eq/kWh by 2050.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Implementation and evaluation of the unified stomatal optimization approach in the Functionally Assembled Terrestrial Ecosystem Simulator (FATES)

Abstract. Stomata play a central role in regulating the exchange of carbon dioxide and water vapor between ecosystems and the atmosphere. Their function is represented in land surface models (LSMs) by conductance models. The Functionally Assembled Terrestrial Ecosystem Simulator (FATES) is a dynamic vegetation demography model that can simulate both detailed plant demographic and physiological dynamics. To evaluate the effect of stomatal conductance model formulation on forest water and carbon fluxes in FATES, we implemented an optimality-based stomatal conductance model – the Medlyn (MED) model – that simulates the relationship between photosynthesis (A) and stomatal conductance to water vapor (gsw) as an alternative to the FATES default Ball–Woodrow–Berry (BWB) model. To evaluate how the behavior of FATES is affected by stomatal model choice, we conducted a model sensitivity analysis to explore the response of gsw to climate forcing, including atmospheric CO2 concentration, air temperature, radiation, and vapor pressure deficit in the air (VPDa). We found that modeled gsw values varied greatly between the BWB and MED formulations due to the different default stomatal slope parameters (g1). After harmonizing g1 and holding the stomatal intercept parameter (g0) constant for both model formulations, we found that the divergence in modeled gsw was limited to conditions when the VPDa exceeded 1.5 kPa. We then evaluated model simulation results against measurements from a wet evergreen forest in Panama. Results showed that both the MED and BWB model formulations were able to capture the magnitude and diurnal changes of measured gsw and A but underestimated both by about 30 % when the soil was predicted to be very dry. Comparison of modeled soil water content from FATES to a reanalysis product showed that FATES captured soil drying well, but translation of drying soil to modeled physiology reduced the models' ability to match observations. Our study suggests that the parameterization of stomatal conductance models and current model response to drought are the critical areas for improving model simulation of CO2 and water fluxes in tropical forests.

54 ENVIRONMENTAL SCIENCES↗

LANDSAT-D MSS/TM tuned orbital jitter analysis model LDS900

The final LANDSAT-D orbital dynamic math model (LSD900), comprised of all test validated substructures, was used to evaluate the jitter response of the MSS/TM experiments. A dynamic forced response analysis was performed at both the MSS and TM locations on all structural modes considered (thru 200 Hz). The analysis determined the roll angular response of the MSS/TM experiments to improve excitation generated by component operation. Cross axis and cross experiment responses were also calculated. The excitations were analytically represented by seven and nine term Fourier series approximations, for the MSS and TM experiment respectively, which enabled linear harmonic solution techniques to be applied to response calculations. Single worst case jitter was estimated by variations of the eigenvalue spectrum of model LSD 900. The probability of any worst case mode occurrence was investigated.

Pollak, T. E.↗

Local stability analysis for a planar shock wave

A procedure to study the local stability of planar shock waves is presented. The procedure is applied to a Rankine-Hugoniot shock in a divergent/convergent nozzle, to an isentropic shock in a divergent/convergent nozzle, and to Rankine-Hugoniot shocks attached to wedges and cones. It is shown that for each case, the equation governing the shock motion is equivalent to the damped harmonic oscillator equation.

Salas, M. D.↗

A new approach to the solution of boundary value problems involving complex configurations

A new approach for solving certain types of boundary value problems about complex configurations is presented. Numerical algorithms from such diverse fields as finite elements, preconditioned Krylov subspace methods, discrete Fourier analysis, and integral equations are combined to take advantage of the memory, speed and architecture of current and emerging supercomputers. Although the approach has application to many branches of computational physics, the present effort is concentrated in areas of Computational Fluid Dynamics (CFD) such as steady nonlinear aerodynamics, time harmonic unsteady aerodynamics, and aeroacoustics. The most significant attribute of the approach is that it can handle truly arbitrary boundary geometries and eliminates the difficult task of generating surface fitted grids.

Rubbert, P. E.↗

Unsteady Euler algorithm with unstructured dynamic mesh for complex-aircraft aeroelastic analysis

A finite-volume unstructured-grid FEM scheme with multistage Runge-Kutta time stepping is applied to the three-dimensional time-dependent Euler equations for inviscid flows on complex aircraft configurations undergoing structural deformation. The derivation of the model, the solution procedure, and the computer implementation are described, and results are presented graphically for a NASA Langley supersonic fighter aircraft model in steady and unsteady (harmonic oscillation in complete-vehicle bending mode) flow regimes. Good agreement between FEM predictions and experimental data is demonstrated.

Batina, John T.↗

Computational studies of metal-metal and metal-ligand interactions

The geometric structure of Cr(CO)6 is optimized at the modified coupled-pair functional (MCPF), single and double excitation coupled-cluster (CCSD) and CCSD(T) levels of theory (including a perturbational estimate for connected triple excitations), and the force constants for the totally symmetric representation are determined. The geometry of Cr(CO)5 is partially optimized at the MCPF, CCSD and CCSD(T) levels of theory. Comparison with experimental data shows that the CCSD(T) method gives the best results for the structures and force constants, and that remaining errors are probably due to deficiencies in the one-particle basis sets used for CO. A detailed comparison of the properties of free CO is therefore given, at both the MCPF and CCSD/CCSD(T) levels of treatment, using a variety of basis sets. With very large one-particle basis sets, the SSCD(T) method gives excellent results for the bond distance, dipole moment and harmonic frequency of free CO. The total binding energies of Cr(CO)6 and Cr(CO)5 are also determined at the MCPF, CCSD and CCSD(T) levels of theory. The CCSD(T) method gives a much larger total binding energy than either the MCPF or CCSD methods. An analysis of the basis set superposition error (BSSE) at the MCPF level of treatment points out limitations in the one-particle basis used here and in a previous study. Calculations using larger basis sets reduced the BSSE, but the total binding energy of Cr(CO)6 is still significantly smaller than the experimental value, although the first CO bond dissociation energy of Cr(CO)6 is well described. An investigation of 3s3p correlation reveals only a small effect. The remaining discrepancy between the experimental and theoretical total binding energy of Cr(CO)6 is probably due to limitations in the one-particle basis, rather than limitations in the correlation treatment. In particular an additional d function and an f function on each C and O are needed to obtain quantitative results. This is underscored by the fact that even using a very large primitive se (1042 primitive functions contracted to 300 basis functions), the superposition error for the total binding energy of Cr(CO)6 is 22 kcal/mol at the MCPF level of treatment.

Barnes, Leslie A.↗

A Theoretical Analysis of the Effects of Fuel Motion on Airplane Dynamics

The general equations of motion for an airplane with a number of spherical fuel tanks are derived. The motion of the fuel is approximated by the motion of solid pendulums. The same type of derivation and equations are shown to apply to any type of fuel tank where the motion of the fuel may be represented in terms of undamped harmonic oscillators. Motions are calculated for a present-day high-speed airplane and a free-flying airplane model with two spherical tanks in the symmetry plane.

Schy, Albert A↗

Ab Initio Simulations of Martensitic Phase Transformations in NiTi-based High Temperature Ternary Shape Memory Alloys: NiTiHf and NiTiZr

Ab initio simulations of phase stability and martensitic phase transitions are performed for NiTi-based ternary shape memory alloys (SMAs). Specifically, we considered NiTiHf and NiTiZr, which are highly studied for high temperature SMA applications. Previously, we performed investigations of ordered NiTi and related binaries [1,2]. However, similar approaches for chemically disordered compounds present additional difficulties. In this work, special quasi-random structures (SQS) were generated for various compositions, x∈[0,0.5], of Ni0.5Ti(0.5-x)Hfx and Ni0.5Ti(0.5-x)Zrx to capture chemical disorder of off-stoichiometric compounds. Phase stability was evaluated through analysis of finite temperature phonon spectra using temperature dependent effective potential (TDEP) method. Free energies for the cubic B2 phase of NiTiHf and NiTiZr were computed using ab initio thermodynamic integration (AITI) developed previously [1,2]. Free energies for monoclinic B19’ and orthorhombic B33 phases were evaluated via quasi harmonic approximations (QHA). Our results show a critical composition (xc) where the three phases of B2, B19’ and B33 meet, i.e. there is a tri-critical point. For x xc, the transition is between B33 and B2, i.e. it is not a shape memory transition. The approach presented here opens the door to ab initio based predictions of MTT for arbitrary ternary SMAs.

Hessam Malmir↗

Search for anisotropic gravitational-wave backgrounds using data from Advanced LIGO and Advanced Virgo's first three observing runs

We report results from searches for anisotropic stochastic gravitational-wave backgrounds using data from the first three observing runs of the Advanced LIGO and Advanced Virgo detectors. For the first time, we include Virgo data in our analysis and run our search with a new efficient pipeline called PyStochon data folded over one sidereal day. We use gravitational-wave radiometry(broadband and narrow band) to produce sky maps of stochastic gravitational-wave backgrounds and to search for gravitational waves from point sources. A spherical harmonic decomposition method is employed to look for gravitational-wave emission from spatially-extended sources. Neither technique found evidence of gravitational-wave signals. Hence we derive 95% confidence-level upper limit sky maps on the gravitational-wave energy flux from broadband point sources, ranging from F(α,Θ) < (0.013−7.6)×10^(−8)erg/sq. cm s Hz,and on the (normalized) gravitational-wave energy density spectrum from extended sources, ranging from Ω(α,Θ) < (0.57−9.3)×10^(−9) per sr, depending on direction (Θ) and spectral index (α). These limits improve upon previous limits by factors of 2.9−3.5. We also set 95% confidence level upper limits on the frequency-dependent strain amplitudes of quasimonochromatic gravitational waves coming from three interesting targets, Scorpius X-1, SN1987A and the Galactic Center, with best upper limits range fromh(0) < (1.7−2.1)×10^(−25), a factor of ≥ 2.0 improvement compared to previous stochastic radiometer searches.

R. Abbott↗

High Order Discontinuous Galerkin Method and Applications (Final Technical Report)

This project aims at the developments and improvements of high order accurate discontinuous Galerkin finite element methods for solving partial differential equations arising from DOE applications. Algorithm development, improvement, analysis, implementation and applications aspects are addressed. The partial differential equations under study involve solutions with shocks or other discontinuities, rapidly changing regions, or multiscale solutions. These include the so-called convection dominated cases, such as the hyperbolic equations (e.g. Euler equations of gas dynamics), parabolic equations with small viscosities (e.g. high Reynolds number Navier-Stokes equations), KdV type equations with small dispersion describing water waves (small third derivative terms), time-dependent bi-harmonic equations and equations with hyper-viscosity (small fourth or higher even derivative terms), problems with highly oscillatory coefficients, or problems for which the macro-scale PDE models may not be correct in localized regions and a micro-scale model must be used instead. Furthermore, we are interested in the long time solutions of such equations with waves traveling a long distance, such as the electromagnetic waves. The requirement on numerical methods is thus high order accuracy, low dissipation/dispersion errors over long time, and a clean and sharp discontinuity resolution. It would also be highly desirable to have the numerical methods to be flexible for complicated geometry and boundary conditions, and to be easy in an adaptive and massively parallel environment. The discontinuous Galerkin finite element method has this potential, however the design and analysis of the discontinuous Galerkin method for each specific class of partial differential equations would require detailed research.

97 MATHEMATICS AND COMPUTING↗