Search NASA⌕ Search

SEARCH · Search NASA

Results for “implicit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Effects of Asperity Distribution on Fluid Flow and Induced Seismicity During Deep Geothermal Exploitation

This work investigates the injection-induced seismic response of a heterogeneous fault plane, featuring low-permeability asperities embedded into a high-permeability damage zone. We simulate the pressure evolution with a hydrogeological simulator, accounting for the heterogeneous fault plane. Seismicity occurs then on the asperities, represented as unstable patches reactivating by means of the Mohr-Coulomb criterion. The hydrological and seismic modules are implicitly coupled to account for effects of asperity reactivation on the permeability. Results show that permeability changes may cause at a later time a change in seismicity propagation. Finally, we also investigated such effects by varying the density of asperities.

58 GEOSCIENCES↗

Environmental justice, impact assessment and the politics of knowledge: The implications of assessing the social distribution of environmental outcomes

Claims of environmental injustice have increasingly become part of environmental conflicts, both explicitly through the work of environmental justice campaigning groups and implicitly through the arguments deployed about the rights and wrongs of a given situation. Such claims can centre on different notions of justice, including those concerned with questions of distribution and procedure. This paper focuses on distributional or outcome justice and explores what implications follow when the distributional concerns of environmental justice are included in the practice of impact assessment processes, including through social impact assessment (SIA). The current use of impact assessment methods in the UK is reviewed showing that although practices are evolving there is a little routine assessment of distributional inequalities. It is argued that whilst this should become part of established practice to ensure that inequalities are revealed and matters of justice are given a higher profile, the implications for conflict within decision making processes are not straightforward. On the one hand, there could be scope for conflict to be ameliorated by analysis of inequalities informing the debate between stakeholders, and facilitating the implementation of mitigation and compensation measures for disadvantaged groups. On the other hand, contestation over how evidence is produced and therefore what it shows, and disagreement as to the basis on which justice and injustice are to be determined, means that conflict may also be generated and sustained within what are essentially political and strategic settings.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Strategy making and power in environmental assessments. Lessons from the establishment of an out-of-town shopping centre in Vaesteras, Sweden

This paper seeks to provide deeper insights into how EA ineffectiveness is produced in land use planning practice. This is explored in a study of local development planning in the city of Vaesteras, Sweden. The case in question is the development of a large out-of-town shopping centre, propelled by the establishment of a new IKEA furniture store. The Healey (2007) framework of planning as strategy making is applied as an analytical framework, together with a focus on power-knowledge relations. In the analysis, we identify a range of mechanisms that produced ineffectiveness by limiting the role of environmental knowledge throughout the planning process. The specific mechanisms we identified were related to the overall consensus perspective in local development strategies and plans, a lack of concretisation and integration of various policies and strategies, a range of exclusion mechanisms and an overall focus on mitigation and benefits of the process in question. In practice, these mechanisms were closely intertwined. Our main conclusion is, consequently, that increased effectiveness of EA would require fundamental transformation of the norms, frameworks and routines that implicitly and explicitly guide land use planning in practice. - Highlights: Black-Right-Pointing-Pointer We analyse how EA-ineffectiveness is produced in land use planning practice. Black-Right-Pointing-Pointer Several mechanisms produce EA-ineffectiveness throughout the whole planning process. Black-Right-Pointing-Pointer These mechanisms are often closely intertwined and mutually reinforcing each other. Black-Right-Pointing-Pointer Enhancing EA-effectiveness requires a fundamental shift of the norms, frameworks and routines shaping planning practice.

54 ENVIRONMENTAL SCIENCES↗

Index-based groundwater vulnerability mapping models using hydrogeological settings: A critical evaluation

Groundwater vulnerability maps are useful for decision making in land use planning and water resource management. This paper reviews the various groundwater vulnerability assessment models developed across the world. Each model has been evaluated in terms of its pros and cons and the environmental conditions of its application. The paper further discusses the validation techniques used for the generated vulnerability maps by various models. Implicit challenges associated with the development of the groundwater vulnerability assessment models have also been identified with scientific considerations to the parameter relations and their selections. - Highlights: • Various index-based groundwater vulnerability assessment models have been discussed. • A comparative analysis of the models and its applicability in different hydrogeological settings has been discussed. • Research problems of underlying vulnerability assessment models are also reported in this review paper.

54 ENVIRONMENTAL SCIENCES↗

Cumulative effects in strategic environmental assessment: The influence of plan boundaries

Cumulative effects (CE) assessment is lacking quality in impact assessment (IA) worldwide. It has been argued that the strategic environmental assessment (SEA) provides a suitable IA framework for addressing CE because it is applied to developments with broad boundaries, but few have tested this claim. Through a case study on the Danish mining sector, this article explores how plan boundaries influence the analytical boundaries applied for assessing CE in SEA. The case was studied through document analysis in combination with semi-structured group interviews of the responsible planners, who also serve as SEA practitioners. It was found that CE are to some extent assessed and managed implicitly throughout the planning process. However, this is through a focus on lowering the cumulative stress of mining rather than the cumulative stress on and capacity of the receiving environment. Plan boundaries do influence CE assessment, though all boundaries are not equally influential. The geographical and time boundaries of the Danish mining plans are broad or flexible enough to accommodate a meaningful assessment of CE, but the topical boundary is restrictive. The study indicates that collaboration among planning authorities and legally appointed CE leadership may facilitate better practice on CE assessment in sector-specific SEA contexts. However, most pressing is the need for relating assessment to the receiving environment as opposed to solely the stress of a proposed plan.

54 ENVIRONMENTAL SCIENCES↗

On choosing the resolution of normative models

Long time horizon normative models are frequently used for policy analysis, strategic planning, and system analysis. Choosing the granularity of the temporal or spatial resolution of such models is an important modeling decision, often having a first order impact on model results. This type of decision is frequently made by modeler judgment, specifically when the predictive power of alternative choices cannot be tested. In this paper, we show how the implicit tradeoffs modelers make in these formulation decisions, in particular in the tradeoff between the accuracy of representation enabled by the available data and model parsimony, may be addressed with established information theoretic ideas. The paper provides guidance for modelers making these tradeoffs or, in certain cases, enables explicit tests for assessing appropriate levels of resolution. Here, we focus on optimization based normative models in the discussion, and draw our examples from the energy and climate domain.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

On the Implementation of 3D Galerkin Boundary Integral Equations

In this article, a reverse contribution technique is proposed to accelerate the construction of the dense influence matrices associated with a Galerkin approximation of singular and hypersingular boundary integral equations of mixed-type in potential theory. In addition, a general-purpose sparse preconditioner for boundary element methods has also been developed to successfully deal with ill-conditioned linear systems arising from the discretization of mixed boundary-value problems on non-smooth surfaces. The proposed preconditioner, which originates from the precorrected-FFT method, is sparse, easy to generate and apply in a Krylov subspace iterative solution of discretized boundary integral equations. Moreover, an approximate inverse of the preconditioner is implicitly built by employing an incomplete LU factorization. Numerical experiments involving mixed boundary-value problems for the Laplace equation are included to illustrate the performance and validity of the proposed techniques.

97 MATHEMATICS AND COMPUTING↗

Sperm quality and environment: A retrospective, cohort study in a Northern province of Italy

Background: Several studies proposed a relationship between environmental factors and semen quality, as well as the negative effect of air pollution on spermatogenesis and gonadal function. No specific studies evaluated the environmental influence on semen quality in a specific geographical area. Aim: to evaluate the environmental influence on male sperm parameters in a Northern Italian population referred for semen analysis in the National Health System. The objective of the study is the assessment of the relationship of both air pollution and environmental parameters with quality-related sperm variables, during the coldest months of the year when air is usually most polluted, due to low ventilation and poor rainfall. Study design: A retrospective, observational, cohort study was carried out in the province of Modena, located in the Emilia-Romagna region of Northern Italy. Methods: Semen analyses (n=406), environmental temperature, air humidity and air particulate matter (PM) measurements from the 1st of November 2014 to the 19th of February 2015 were acquired to the first database. Since spermatogenesis lasts over two months, a second, wider database was arranged, evaluating environmental exposure in the 3 months before semen collection (from August 1st 2014). All data included in the database were registered by geo-coding the residential address of the patients and the site of registration of environmental factors. The geo-codification of parameters was performed using Fusion Tables of Google available at (https://www.google.com/fusiontables/data? dsrcid=implicit), considering the exact time of measurement. Results: Average air temperature was inversely related to sperm concentration and to total sperm number (p<0.001). Semen volume was inversely related only to the minimum (p<0.001) and not to maximum recorded temperature (p=0.110). Air humidity was not related to sperm quantity and quality. PM{sub 2.5} was directly related to total sperm number (p<0.001). PM{sub 10} was directly related to both semen volume (0<0.001), and typical forms (p<0.001), inversely related to atypical forms (p<0.001), but related neither to sperm concentration (p=0.430) nor to sperm motility. The extended analyses considering environmental parameters in the 3 months before semen collection, confirmed the relationship between air temperature and sperm quantity, whereas no influence was found between PM and sperm quality. Conclusion: An influence of environmental temperature on semen quantity is suggested, without a clear effect of air pollution, as assessed through PM{sub 10} levels, on sperm parameter variations.

54 ENVIRONMENTAL SCIENCES↗

TRITON: A Multi-GPU open source 2D hydrodynamic flood model

A new open source multi-GPU 2D flood model called TRITON is presented in this work. The model solves the 2D shallow water equations with source terms using a time-explicit first order upwind scheme based on an Augmented Roe's solver that incorporates a careful estimation of bed strengths and a local implicit formulation of friction terms. Here, the scheme is demonstrated to be first order accurate, robust and able to solve for flows under various conditions. TRITON is implemented such that the model effectively utilizes heterogeneous architectures, from single to multiple CPUs and GPUs. Different test cases are shown to illustrate the capabilities and performance of the model, showing promising runtimes for large spatial and temporal scales when leveraging the computer power of GPUs. Under this hardware configuration, communication and input/output subroutines may impact the scalability. The code is developed under an open source license and can be freely downloaded in https://code.ornl.gov/hydro/triton.

2D flood model↗

Heterogeneous local dynamics revealed by classification analysis of spatially disaggregated time series data

Time series data provide a crucial window into infectious disease dynamics, yet their utility is often limited by the spatially aggregated form in which they are presented. When working with time series data, violating the implicit assumption of homogeneous dynamics below the scale of spatial aggregation could bias inferences about underlying processes. We tested this assumption in the context of the 2015–2016 Zika epidemic in Colombia, where time series of weekly case reports were available at national, departmental, and municipal scales. First, we performed a descriptive analysis, which showed that the timing of departmental-level epidemic peaks varied by three months and that departmental-level estimates of the time-varying reproduction number, R(t), showed patterns that were distinct from a national-level estimate. Second, we applied a classification algorithm to six features of proportional cumulative incidence curves, which showed that variability in epidemic duration, the length of the epidemic tail, and consistency with a cumulative normal density curve made the greatest contributions to distinguishing groups. Third, we applied this classification algorithm to data simulated with a stochastic transmission model, which showed that group assignments were consistent with simulated differences in the basic reproduction number, R0. This result, along with associations between spatial drivers of transmission and group assignments based on observed data, suggests that the classification algorithm is capable of detecting differences in temporal patterns that are associated with differences in underlying drivers of incidence patterns. Overall, this diversity of temporal patterns at local scales underscores the value of spatially disaggregated time series data.

60 APPLIED LIFE SCIENCES↗

Sparse chronology strategy for integrating seasonal energy storage in capacity expansion models

Here, this study develops the sparse chronology method to enhance the representative period framework in capacity expansion models, enabling the effective integration of long-duration energy storage modeling. Traditional representative period methods cannot capture the state of charge of seasonal energy storage systems because they do not establish effective inter-day linkages to connect the state of charge between periods. The sparse chronology approach addresses this limitation by establishing inter-day linkages that allow state of charge to shift inter-seasonally. At the same time, it groups identical representative days into partitions, applying constraints sparsely and implicitly to reduce computational load further. Validation results demonstrate that this method successfully simulates long-duration energy storage patterns, achieving close alignment with a continuous yearly benchmark model, with seasonal trends and state of charge cycles clearly represented. The computational load analysis reveals that the sparse chronology method efficiently applies constraints on maximum and minimum state of charge limits within the representative day framework, eliminating the need for detailed constraints on each individual day. By partitioning representative days and constraining only the start and end of each partition, the method significantly decreases computational requirements. Simulation results show that sparse chronology closely approximates the continuous yearly method's accuracy, even with as few as 20 representative days, achieving correlation values with the benchmark of nearly 0.9 in state of charge plots. Furthermore, it maintains computational efficiency, requiring only 4 % of the solver time compared to the continuous yearly method with 20 representative days. This approach allows capacity expansion models to incorporate long-duration energy storage with high temporal, spatial, and technological resolution, enabling more detailed modeling for large-scale power systems.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Flow behavior of hydraulic fractured tight formations considering Pre-Darcy flow using EDFM

For tight reservoirs/formations, flow in fracture and matrix obey different flow patterns. Pre-Darcy flow always exists in low permeability subsurface porous media while Darcy flow can be applied in fracture. It is an outstanding challenge to understand the flow behavior coupling different flow mechanisms. As numerical simulation can predict field-scale performance so the development of efficient simulation method becomes a key issue to evaluate the flow behavior. In this paper, we develop an improved discrete fracture model based on the widely used embedded discrete facture model (EDFM) to simulate the transport both in homogenous and heterogeneous porous media in the presence of Pre-Darcy flow. The conservation equations are derived for fracture and matrix firstly and then discretized by fully implicit method. The transmissibility of different connection types is defined and the detailed calculation workflow is presented as well. The proposed model is verified through the comparison with the model using local grid refined (LGR) method. It is discovered that our simulation method exhibits good accuracy when analyzing the effect of Pre-Darcy flow. Some examples are shown including 1D scalar transport, 2D heterogeneous, 3D flow, complex fracture system and multiple well system problems with fully-coupled flow in fracture and matrix. The pressure distribution and well flux are demonstrated to analyze the Pre-Darcy flow characteristics. Results indicate that the new model works robustly for different flow problems which provide further insight into the Pre-Darcy flow in low permeability media.

02 PETROLEUM↗

Toward a high-fidelity tritium transport modeling for retention and permeation experiments

We report Tritium Migration Analysis Program version 8 (TMAP8), the latest version of TMAP, was developed within the framework of the Multiphysics Object-Oriented Simulation Environment (MOOSE). Created at Idaho National Laboratory (INL), MOOSE is an open-source, dimension-agnostic, fully coupled, and fully implicit multiphysics platform featuring massively parallel computation capabilities. Using TMAP8, tritium transport in a divertor monoblock was analyzed to elucidate the effects of pulsed operation (up to fifty 1,600 s plasma discharge and cool-down cycles) on the tritium in-vessel inventory source term and ex-vessel release term (i.e., tritium retention and permeation) for safety analysis. With its built-in Message Passing Interface capability, TMAP8 can, in under 2 h, simulate tritium transport in three different layered materials (i.e., tungsten, copper, and copper-chromium-zirconium alloy) in 2D geometry, using a single device/computer with 10 cores. The MOOSE-based TMAP8 code can leverage other MOOSE tools developed under the Nuclear Energy Advanced Modeling and Simulation program to perform tritium and thermal transport in complex geometries and multiphysics environments. And via its massively parallel computation, MOOSE will enable the fusion pilot plant designers to conduct high-fidelity multiphysics modeling for the design of the divertor and blanket systems as well as for the safety analysis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Full-Induction Magnetohydrodynamics Solver for Liquid Metal Fusion Blankets in Vertex-CFD

Multiphysics modeling of liquid metal fusion blankets, which produce tritium and convert energy of neutrons created via fusion reactions into heat, is crucial for predicting performance, ensuring structural integrity, and optimizing energy production. While traditional blanket modeling of liquid metal flows during normal steady operating conditions commonly employs the inductionless approximation of the magnetohydrodynamics (MHD) equations, transient scenarios, when the plasma-confining magnetic field varies on millisecond time scales, require a full-induction MHD approach that dynamically evolves the magnetic field via the time-dependent induction equation. This paper presents the formulation, implementation, and initial verification of a full-induction MHD solver integrated within the open-source Vertex-CFD framework, which aims to achieve tight multiphysics coupling, a flexible software design enabling easy extension and addition of physics models, and performance portability across computing platforms. The solver utilizes finite element spatial discretization, implicit Runge–Kutta time integration, and an inexact Newton method to solve the resulting discrete nonlinear system, leveraging Trilinos packages for efficient computation. Verification against selected benchmark problems demonstrates accuracy and robustness of the solver. Furthermore, when the solver is applied to an idealized blanket model in 2.5D and full 3D, results obtained with Vertex-CFD are in good agreement with recently published quasi-2D simulations. These findings establish a computational foundation for future simulations of transient MHD phenomena in liquid metal blankets with Vertex-CFD, and open avenues for future extensions and performance optimizations.

Endeve, Eirik [ORNL] (ORCID:0000000312519507)↗

Adaptive elasticity policies for staging-based in situ visualization

In situ processing aims to alleviate the growing gap between computation and I/O capabilities by performing data processing close to the data source. In situ processing is widely used to process data generated by multiple data sources, including observation data from edge devices or scientific observational facilities and the simulation data generated by scientific computation on a high-performance computing (HPC) platform. For a scientific workflow that is run on an HPC platform and composed of a simulation program and an in situ data analytics or visualization (abbreviated as ana/vis) task, there is an implicit assumption that the computing resources assigned to the workflow keep static during the workflow execution. However, with the converging trend between the HPC and cloud computing platform, running the in situ ana/vis task in an elastic way is promising to decrease its overhead and improve its resource utilization rate. Resource elasticity represents the ability to change resource configurations such as the number of computing nodes/processes during workflow execution. An elastic job may dynamically adjust resource configurations; it may use a few resources at the beginning and more resources toward the end of the job when interesting data appear. However, it is hard to predict a priori how many computing nodes/processes need to be added/removed during the workflow execution to adapt to changing workflow needs. How to efficiently guide elasticity operations, such as growing or shrinking the number of processes used for in situ analysis during workflow execution, is an open-ended research question. In this article, we present adaptive elasticity policies that adopt workflow runtime information collected during workflow execution to predict how to trigger the addition/removal of processes in order to minimize in situ processing overhead. Taking in situ visualization tasks as an example, we integrate the presented elasticity policies into a staging-based elastic workflow and evaluate its efficiency in multiple elasticity scenarios. Compared with the situation without elasticity or with a static elasticity policy that uses a fixed number of processes for each rescaling operation, the adaptive elasticity policy can save overhead in finding a proper resource configuration and improve resource utilization efficiency. Furthermore, one experiment illustrates that the adaptive elasticity policy saves 41% of core-hours compared with the situation without the resource elasticity.

97 MATHEMATICS AND COMPUTING↗

Model Predictive Control of Discrete-Continuous Energy Systems via Generalized Disjunctive Programming

Generalized Disjunctive Programming (GDP) provides an alternative framework to model optimization problems with both discrete and continuous variables. The key idea behind GDP involves the use of logical disjunctions to represent discrete decisions in the continuous space, and logical propositions to denote algebraic constraints in the discrete space. Compared to traditional mixed-integer programming (MIP), the inherent logic structure in GDP yields tighter relaxations that are exploited by global branch and bound algorithms to improve solution quality. In this paper, we present a general GDP model for optimal control of hybrid systems that exhibit both discrete and continuous dynamics. Specifically, we use GDP to formulate a model predictive control (MPC) model for piecewise-affine systems with implicit switching logic. As an example, the GDP-based MPC approach is used as a supervisory control to improve energy efficiency in residential buildings with binary on/off, relay-based thermostats. A simulation study is used to demonstrate the validity of the proposed approach, and the improved solution quality compared to existing MIPbased control approaches.

Bhattacharya, Arnab↗