Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Soot Deposit Properties in Practical Flames

Soot deposition from hydrocarbon flames was investigated in order to evaluate the evolution of the deposits during the transient process of heating an object that starts with a cold metal surface that is exposed to a flame. The study focused on the fire/metal surface interface and the critical issues associated with the specification of the thermal boundaries at this interface, which include the deposition of soot on the metal surface, the chemical and physical properties of the soot deposits and their subsequent effect on heat transfer to the metal surface. A laboratory-scale device (metallic plates attached to a water-cooled sampling probe) was designed for studying soot deposition in a laminar ethylene-air premixed flame. The metallic plates facilitate the evaluation of the deposition rates and deposit characteristics such as deposit thickness, bulk density, PAH content, deposit morphology, and thermal properties, under both water-cooled and uncooled conditions. Additionally, a non-intrusive Laser Flash Technique (in which the morphology of the deposit is not modified) was used to estimate experimental thermal conductivity values for soot deposits as a function of deposition temperature (water-cooled and uncooled experiments), location within the flame and chemical characteristics of the deposits. Important differences between water-cooled and uncooled surfaces were observed. Thermophoresis dominated the soot deposition process and enhanced higher deposition rates for the water-cooled experiments. Cooler surface temperatures resulted in the inclusion of increased amounts of condensable hydrocarbons in the soot deposit. The greater presence of condensable material promoted decreased deposit thicknesses, larger deposit densities, different deposit morphologies, and higher thermal conductivities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Three dimensional simulations of Richtmyer-Meshkov instabilities in gas-curtain shock-tube experiments

It is not feasible to compute high Reynolds-number (Re) turbulent flows by directly resolving all scales of motion and material interfaces; instead, macroscale portions of the unsteady turbulent motion are computed while the rest of the flow physics including molecular diffusion and other micro scale physics (e.g., combustion) remains unresolved. In large eddy simulation (LES), the large energy containing structures are resolved whereas the smaller, presumably more isotropic, structures are filtered out and their unresolved subgrid scale (SGS) effects are modeled. The construction of SGS models for LES is pragmatic and based primarily on empirical information. Adding to the physics based difficulties in developing and validating SGS models, truncation terms due to discretization are comparable to SGS models in typical LES strategies, and LES resolution requirements become prohibitively expensive for practical flows and regimes. Implicit LES (ILES) - and monotone integrated LES (MILES) introduced earlier, effectively address the seemingly insurmountable issues posed to LES by underresolution, by relying on the use of SGS modeling and filtering provided implicitly by physics capturing numerics. Extensive work has demonstrated that predictive unresolved simulations of turbulent velocity fields are possible using any of the class of nonoscillatory finite-volume (NFV) numerical algorithms. Popular NFV methods such as flux-corrected transport (FCT), the piecewise parabolic method (PPM), total variation diminishing (TVD), and hybrid algorithms are being used for ILES. In many applications of interest, turbulence is generated by shock waves via Richtmyer-Meshkov instabilities (RMI). The instability results in vorticity being introduced at material interfaces by the impulsive loading of the shock wave. A critical feature of this impulsive driving is that the turbulence decays as dissipation removes kinetic energy from the system. RMI add the complexity of shock waves and other compressible effects to the basic physics associated with mixing; compressibility further affects the basic nature of material mixing when mass density and material mixing fluctuation effects are not negligible. Because RMI are shock-driven, resolution requirements make direct numerical simulation impossible even on the largest supercomputers. State-of-the-art simulations of RMI instabilities use hybrid methods which require switching between the use of shock capturing schemes and conventional (explicit) LES depending on the local flow conditions. On the other hand. because ILES is based on (locally adaptive) NFV methods it is naturally capable of emulating shock physics. The unique combination of shock and turbulence emulation capabilities supports direct use of ILES as an effective simulation anzatz in RMI research. This possibility is explored in the current paper in the context of a prototypical case study for which the available laboratory data can be used to test and validate ILES modeling based on various NFV methods.

74 ATOMIC AND MOLECULAR PHYSICS↗

Interface defects in SiC power MOSFETs - An electrically detected magnetic resonance study based on spin dependent recombination

This study presents electrically detected magnetic resonance (EDMR) measurements on a silicon carbide (SiC) MOSFET having the structure of a double-diffused silicon MOSFET (DMOS). The resonance pattern of a SiC DMOS was measured by monitoring the change of the recombination current between the source/body and the drain. The amplitude of the response has a maximum when the device is biased in depletion due to the equal concentrations of electrons and holes at the interface resulting in the most efficient recombination. The measured anisotropic g-tensor has axial symmetry with g{sub ∥} = 2.0051(4) (B ‖ c-axis), and g{sub ⊥} = 2.0029(4) (B⊥ c-axis) and the pattern shows several hyperfine (HF) peaks. We tentatively identify the observed defect as a silicon vacancy located directly at the interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Topological Antiferromagnetic Van der Waals Phase in Topological Insulator/Ferromagnet Heterostructures Synthesized by a CMOS-Compatible Sputtering Technique

Breaking time-reversal symmetry by introducing magnetic order, thereby opening a gap in the topological surface state bands, is essential for realizing useful topological properties such as the quantum anomalous Hall and axion insulator states. In this work, a novel topological antiferromagnetic (AFM) phase is created at the interface of a sputtered, c-axis-oriented, topological insulator/ferromagnet heterostructure—Bi 2 Te 3 /Ni 80 Fe 20 because of diffusion of Ni in Bi 2 Te 3 (Ni-Bi 2 Te 3 ). The AFM property of the Ni-Bi2Te3 interfacial layer is established by observation of spontaneous exchange bias in the magnetic hysteresis loop and compensated moments in the depth profile of the magnetization using polarized neutron reflectometry. Analysis of the structural and chemical properties of the Ni-Bi2Te3 layer is carried out using selected-area electron diffraction, electron energy loss spectroscopy, and X-ray photoelectron spectroscopy. These studies, in parallel with first-principles calculations, indicate a solid-state chemical reaction that leads to the formation of Ni=Te bonds and the presence of topological antiferromagnetic (AFM) compound NiBi 2 Te 4 in the Ni-Bi 2 Te 3 interface layer. The Neél temperature of the Ni-Bi 2 Te 3 layer is ≈ 63 K, which is higher than that of typical magnetic topological insulators (MTIs). The presented results provide a pathway toward industrial complementary metal-oxide-semiconductor (CMOS)-process-compatible sputtered-MTI heterostructures, leading to novel materials for topological quantum devices.

36 MATERIALS SCIENCE↗

Effects of barrier composition and electroplating chemistry on adhesion and voiding in copper/dielectric diffusion barrier films

The effects of electroplating chemistry and dielectric diffusion barrier composition on copper voiding and barrier adhesion are reported. Adhesion was quantified using the four-point bend thin film adhesion technique, and voiding in the Cu films was quantified using scanning electron microscopy. A total of 12 different film stacks were investigated, including three different Cu electroplating chemistries and four different barrier materials (SiN, N-doped SiC, O-doped SiC, and dual-layer SiC). Both plating chemistry and barrier composition have a large effect on interface adhesion and voiding in the Cu film. X-ray photoelectron spectroscopy was used to investigate the segregation of Cu electroplating impurities, such as S and Cl, to the Cu/barrier interface. Secondary ion mass spectrometry was used to quantify oxygen content at the Cu/barrier interface in a subset of samples. This interface oxygen content is correlated with measured adhesion values.

36 MATERIALS SCIENCE↗

Voltage-Dependent First-Principles Barriers to Li Transport within Li-Ion Battery Solid Electrolyte Interphases

Charging a Li-ion battery requires Li-ion transport between the cathode and the anode. This Li-ion transport is dependent on (among other factors) the electrostatic environment that the ion encounters within the solid electrolyte interphase (SEI), which separates the anode from the surrounding electrolyte. A previous first-principles work has illuminated the reaction barriers through likely atomistic SEI environments but has had difficulty accurately reflecting the larger electrostatic potential landscape that an ion encounters moving through the SEI. In this work, we apply the recently developed quantum continuum approximation (QCA) technique to provide an equilibrium electronic potentiostat for first-principles interface calculations. Using QCA, we calculate the potential barrier for Li-ion transport through LiF, Li 2 O, and Li 2 CO 3 SEIs along with LiF–LiF and LiF–Li 2 O grain boundaries, all paired with Li metal anodes. Here, we demonstrate that the SEI potential barrier is dependent on the electrochemical potentials of the anode in each system. Finally, we use these techniques to estimate the change in the diffusion barrier for a Li ion moving in a LiF SEI as a function of the anode potential. We find that properly accounting for interface and electronic voltage effects significantly lowers reaction barriers compared with previous literature results.

25 ENERGY STORAGE↗

A New Method for the Solution of Group Diffusion Equations

Here, the diffusion equations associated with the multigroup, multiregion problem are solved by expansions in eigenfunctions which are solutions of the Helmholtz equation. A determinantal criticality equation is exhibited in which the order of the determinant is independent of the number of groups and which can be solved without recourse to complicated computational procedures. Moreover, the need to fulfill explicitly the requirements that the flux and current associated with each neutron group be continuous across interfaces is eliminated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Turbulent/Non-Turbulent Interface Bounding a Far-Wake

The velocity fields of a turbulent wake behind a flat plate obtained from the direct numerical simulations of Moser et al. are used to study the structure of the flow in the intermittent zone where there are, alternately, regions of fully turbulent flow and non-turbulent velocity fluctuations either side of a thin randomly moving interface. Comparisons are made with a wake that is 'forced' by amplifying initial velocity fluctuations. There is also a random temperature field T in the flow; T varies between constant values of 0.0 and 1.0 on the sides of the wake. The value of the Reynolds number based on the centreplane mean velocity defect and halfwidth b of the wake is Re approx. = 2000. It is found that the thickness of the continuous interface is about equal to 0.07b, whereas the amplitude of fluctuations of the instantaneous interface displacement y(sub I)(t) is an order of magnitude larger, being about 0.5b. This explains why the mean statistics of vorticity in the intermittent zone can be calculated in terms of the probability distribution of y(sub I) and the instantaneous discontinuity in vorticity across the interface. When plotted as functions of y - y(sub I), the conditional mean velocity (U) and temperature (T) profiles show sharp jumps Delta(U) and Delta(T) at the interface adjacent to a thick zone where (U) and (T) vary much more slowly. Statistics for the vorticity and velocity variances, available in such detail only from DNS data, show how streamwise and spanwise components of vorticity are generated by vortex stretching in the bulges of the interface. Flow fields around the interface, analyzed in terms of the local streamline pattern, confirm previous results that the advancement of the vortical interface into the irrotational flow is driven by large-scale eddy motion. It is argued that because this is an inviscid mechanism the entrainment process is not sensitive to the value of Re, and that small-scale nibbling only plays a subsidiary role. While mean Reynolds stresses decrease gradually in the intermittent zone, conditional stresses are found to decrease sharply towards zero at the interface. Using one-point turbulence models applied to either unconditional or conditional statistics for the turbulent region and then averaged, the entrainment rate E(sub b) would, if calculated exactly, be zero. But if computed with standard computational methods, E(sub b) would be non-zero because of numerical diffusion. It is concluded that the current practice in statistical models of approximating entrainment by a diffusion process is computationally arbitrary and physically incorrect. An analysis shows how E(sub b) is related to Delta(U) and the jump in shear stress at the interface, and correspondingly to Delta(T) and the heat flux.

Bisset, David K.↗

Electro-osmo-dialysis through nanoporous layers physically conjugated to micro-perforated ion-exchange membranes: Highly selective accumulation of trace coions

This study explores theoretically and numerically the phenomenon of counter-flow accumulation of trace coions during electro-osmo-dialysis through composite membranes containing nanoporous and perforated ion-exchange layers. The combination of charged nanopores and perforations allows electroosmosis, and ion concentration polarization appears near the ion-exchange layer. Accumulation of trace coions occurs because their advective and electromigration flow velocity components have opposite signs and are locally compensating in depletion regions where electric fields are high. This local compensation of flow components can give rise to high accumulation factors (>1000 in some cases) for trace coions at some distance from the interface between the nanoporous and ion-exchange layers. Moreover, the extent of this accumulation depends on the trace-coion diffusion coefficient. The resulting selectivity between different coions might serve as a basis for environmentally friendly separation of ionic species such as synthetic peptides or rare-earth elements. For example, a periodic process might include accumulation followed by species release into smaller volumes of solution. For both rare-earth ions and peptide-like species, the accumulation selectivity between ions with small differences in mobilities depends on system parameters such as nanoporous-layer thickness, distance between the perforations, and the zeta potential of the nanopore surface. Here, the use of optimal values of these membrane parameters may enable tuning of the electro-osmo-dialysis system for separation of specific ions. Modelling reveals that despite inhomogeneous patterns of fluid and ion flows close to the nanoporous/perforated ion-exchange interface, at relatively short distances from this interface (less than half the distance between the perforations) all the flows become practically one-dimensional (1D). Similarly, the concentration profiles of trace coions also become 1D. The flow one-dimensionality at short distances from the current-polarized interface enables a simple 1D approximation that is useful for an approximate analysis of trends in this multi-parameter system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of the one dimensional electron gas arrays confined by steps in vicinal GaN/AlGaN heterointerfaces

One dimensional electron gas (1DEG) arrays in vicinal GaN/AlGaN heterostructures have been studied. The steps at the interface would lead to the lateral barriers and limit the electron movement perpendicular to such steps. Through a self-consistent Schrödinger-Poisson approach, the electron energy levels and wave functions were calculated. It was found that when the total electron density was increased, the lateral barriers were lowered due to the screening effects by the electrons, and the electron gas became more two-dimension like. The calculated 1DEG densities were compared to the experimental values and good agreements were found. Moreover, we found that a higher doping density is more beneficial to form 1-D like electron gas arrays.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Metallic filament formation by aligned oxygen vacancies in ZnO-based resistive switches

The electronic structure of ZnO with defects of oxygen vacancies were investigated by using first-principles methods. Some structure models were constructed in order to investigate the effects of the distribution of oxygen vacancies on the electronic properties of ZnO. By analyzing the calculated results, we found that only the aligned oxygen vacancies can form the conducting channel in ZnO, and the transformation of the oxygen vacancy from charged state to neutral state is consistent with the energetics rule of the forming aligned oxygen vacancies. As for the heterojunction of Pt/ZnO/Pt, the oxygen vacancies near the interface of Pt/ZnO depress the local Schottky barrier effectively, and the aligned oxygen vacancies in ZnO form a conducting filament connecting two Pt electrodes. The metallic filament formation in Pt/ZnO/Pt resistive switching cells should be closely related to the carrier injection from Pt electrode into ZnO and the arrangement of oxygen vacancies in ZnO slab.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Intermixing at the In x S y /Cu 2 ZnSn(S,Se) 4 Heterojunction and Its Impact on the Chemical and Electronic Interface Structure

We report on the chemical and electronic structure of the interface between a thermally co-evaporated In x S y buffer and a Cu 2 ZnSn(S,Se) 4 (CZTSSe) absorber for thin-film solar cells. To date, such cells have achieved energy conversion efficiencies up to 8.6%. Using surface-sensitive X-ray and UV photoelectron spectroscopy, combined with inverse photoemission and bulk-sensitive soft X-ray emission spectroscopy, we find a complex character of the buffer layer. It includes oxygen, as well as selenium and copper that diffused from the absorber into the In x S y buffer, exhibits an electronic band gap of 2.50 ± 0.18 eV at the surface, and leads to a small cliff in the conduction band alignment at the In x S y /CZTSSe interface. After an efficiency-increasing annealing step at 180 °C in nitrogen atmosphere, additional selenium diffusion leads to a reduced band gap at the buffer layer surface (2.28 ± 0.18 eV).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bulk diffusion induced structural modifications of carbon-transition metal nanocomposite films

The influence of transition metal (TM = V,Co,Cu) type on the bulk diffusion induced structural changes in carbon:TM nanocomposite films is investigated. The TMs have been incorporated into the carbon matrix via ion beam co-sputtering, and subsequently the films have been vacuum annealed in the temperature range of 300 - 700 deg. C. The structure of both the dispersed metal rich and the carbon matrix phases has been determined by a combination of elastic recoil detection analysis, x-ray diffraction, transmission electron microscopy, and Raman spectroscopy. The as-grown films consist of carbidic (V and Co) and metallic (Cu) nanoparticles dispersed in the carbon matrix. Thermal annealing induces surface segregation of Co and Cu starting at {>=} 500 deg. C, preceded by the carbide-metal transformation of Co-carbide nanoparticles at {approx} 300 deg. C. No considerable morphological changes occur in C:V films. In contrast to the surface diffusion dominated regime where all the metals enhance the six-fold ring clustering of C, in the bulk diffusion controlled regime only Co acts as a catalyst for the carbon graphitization. These results are consistent with the metal-induced crystallization mechanism in the C:Co films. The results are discussed on the basis of the metal-carbide phase stability, carbon solubility in metals or their carbides, and interface species.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ultrasonic inspection of a diffusion-bonded platelet rocket chamber liner

An ultrasonic inspection technique, which applies pulse-echo technology for examining the rocket chamber's liner-to-jacket interface was developed, which makes it possible to characterize disbonded layers in intimate contact. The method was used to inspect a simulated flat-geometry rocket chamber liner structure with debonded liner layers and to validate the use of boron nitride powder as a flaw introduction technique.

Matson, Douglas M.↗

Influence of string-like cooperative atomic motion on surface diffusion in the (110) interfacial region of crystalline Ni

Although we often think about crystalline materials in terms of highly organized arrays of atoms, molecules, or even colloidal particles, many of the important properties of this diverse class of materials relating to their catalytic behavior, thermodynamic stability, and mechanical properties derive from the dynamics and thermodynamics of their interfacial regions, which we find they have a dynamics more like glass-forming (GF) liquids than crystals at elevated temperatures. This is a general problem arising in any attempt to model the properties of naturally occurring crystalline materials since many aspects of the dynamics of glass-forming liquids remain mysterious. We examine the nature of this phenomenon in the “simple” case of the (110) interface of crystalline Ni, based on a standard embedded-atom model potential, and we then quantify the collective dynamics in this interfacial region using newly developed methods for characterizing the cooperative dynamics of glass-forming liquids. As in our former studies of the interfacial dynamics of grain-boundaries and the interfacial dynamics of crystalline Ni nanoparticles (NPs), we find that the interface of bulk crystalline Ni exhibits all the characteristics of glass-forming materials, even at temperatures well below the equilibrium crystal melting temperature, T{sub m}. This perspective offers a new approach to modeling and engineering the properties of crystalline materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Equilibrium solute segregation to matrix- θ' precipitate interfaces in Al-Cu alloys from first principles

Particular combinations of solute atoms segregated to the interface of the Al and θ ' - Al 2 Cu in Al-Cu alloys can help stabilize θ ' precipitates at high temperatures. Stabilization of such precipitates is determined by a combination of thermodynamics (including driving forces for coarsening and transformation and solute segregation tendencies) and kinetic effects (including solute diffusion and interfacial mobility in the presence of interfacial solute segregation). For some alloys such as recent Al-Cu-based alloys, multiple solutes segregate in significant quantities to interfaces, and solute-solute interactions at the interface are important, with multiple types of solutes competing for similar interfacial sites. To treat this situation, we develop and apply a statistical mechanics approach to calculate the temperature-dependent equilibrium solute atoms distribution near the coherent and semicoherent interfaces between the Al matrix and the θ ' - Al 2 Cu precipitates. The developed approach is applied to the investigation of Si, Mn, and Zr segregation at the interface, as particular combinations of these elements affect the thermal stability of the θ ' precipitates. We demonstrate that because Si and Mn atoms segregate on the same semicoherent interface, the presence of Si reduces the concentration of Mn solutes at the interface. Si atoms preferably occupy the first layer of the interface and compete with Mn atoms for one type of particular sites in the layer. Mn atoms preferably occupy the second layer of the semicoherent interface, and the Mn-Mn interaction plays an important role in their distribution. Zr atoms mostly segregate on one of the two nonequivalent sites of the second layer of the coherent interface. Due to symmetry properties of the coherent interface, the calculations show that the segregation Zr of atoms to this interface will likely lead to the formation of L 1 2 ordered Al 3 Zr layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact of Microporous Layer Roughness on Gas-Diffusion-Electrode-Based Polymer Electrolyte Membrane Fuel Cell Performance

This study explores the role of the gas diffusion media microporous layer (MPL) surface structure on the electrochemical properties of gas-diffusion-electrode (GDE)-based membrane electrode assemblies (MEAs). It has been shown that a thin ionomer layer on top of the GDE and hot pressing is needed to create good contact between the catalyst layer and the membrane. In this study, gas diffusion media with different MPL surface roughness were applied to fabricate GDE-based MEAs to understand how MPL roughness impacts the amount of ionomer overlayer required for maximum performance. Electron microscopy was employed to investigate MPL/catalyst layer and catalyst layer/membrane interfaces. In-situ performance testing was used to assess the impact of MPL roughness and ionomer overlayer on catalyst utilization and air polarization performance. We find that a smoother MPL surface required a thinner ionomer overlayer than gas diffusion media (GDM) with a rougher MPL surface to achieve a performance comparable to direct-coated catalyst-coated-membrane MEAs.

36 MATERIALS SCIENCE↗