SEARCH · Search NASA

Results for “source characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Sources of error and methods to improve accuracy in interface state density analysis using quasi-static capacitance–voltage measurements in wide bandgap semiconductors

Characterizing interface trap states in commercial wide bandgap devices using frequency-based measurements requires unconventionally high probing frequencies to account for both fast and slow traps associated with wide bandgap materials. The C - ψs technique has been suggested as a viable quasi-static method for determining the interface trap state densities in wide bandgap systems, but the results are shown to be susceptible to errors in the analysis procedure. Here this work explores the primary sources of errors present in the C - ψs technique using an analytical model that describes the apparent response for wide bandgap MOS capacitor devices. Measurement noise is shown to greatly impact the linear fitting routine of the 1/C$^{*2}_s$ vs Ψ s plot to calibrate the additive constant in the surface potential/gate voltage relationship, and an inexact knowledge of the oxide capacitance is also shown to impede interface trap state analysis near the band edge. In addition, a slight nonlinearity that is typically present throughout the 1/C$^{*2}_s$ vs Ψ s plot hinders the accurate estimation of interface trap densities, which is demonstrated for a fabricated n-SiC MOS capacitor device. Methods are suggested to improve quasi-static analysis, including a novel method to determine an approximate integration constant without relying on a linear fitting routine.

42 ENGINEERING↗

DOE OSTI2024

Stress Dependency of Brittle Creep in Granite: Insights into Source Mechanisms and Parameters

Creep in rocks refers to the gradual deformation of rock material over time under the influence of constant stress. Characterizing these deformations is of great importance for engineering design, geotechnical assessment, mining operations, geological studies, and understanding natural hazards. While laboratory experiments and a variety of numerical approaches have offered explanations for microcrack interaction and damage accumulation under the three stages of creep (primary, secondary and tertiary) in conventional creep experiments, the micromechanisms of the fractures produced in brittle creep and its dependency on the applied stress have not been explored in detail. The present study focused on investigating the fracturing mechanisms that occur during creep-induced fracturing at different stress levels and estimation of the source parameters and energy budget components. A series of uniaxial compression creep experiments have been conducted at different stress level ratios (70%, 75%, 80% and 85%), to the unconfined compressive strength (UCS) of double-flawed Barre granite specimen. Creep measurements were complemented with the Acoustic Emission (AE) measurements. The creep-induced fractures were classified into double-couple (DC), compensated linear vector dipole (CLVD) and isotropic (ISO) components using the AE moment tensor decomposition technique. The results show that non-double-couple sources dominated during creep at all the specified stress levels; however, their proportions decreased as the stress level was increased. The source parameters estimation indicated a significant increase in the magnitude of the events and the radiated seismic energy with increasing levels of stress and a slight increase in the evaluated source radius and stress drop with increasing stress levels. Furthermore, this study contributes to the existing knowledge of creep-induced fracturing by providing insights into the fracturing mechanisms and the radiated seismic energy produced, which can be helpful for the development of improved models and strategies for rock engineering and geoscience applications.

58 GEOSCIENCES↗

DOE OSTI2025

A proposed high-intensity radiometer calibration method using concentrated solar radiation

Accurate calibration of irradiance measurement devices, or radiometers, is essential for ensuring the reliability of measurements in high heat applications such as concentrating solar power (CSP), aerospace, defense, and pulsed power systems. Despite the critical need, existing calibration standards and service providers are limited to irradiance levels below 100 kW/m 2 and specific radiation sources, which is insufficient for many applications. For instance, CSP technologies, particularly those under the Department of Energy’s Solar Energy Technologies Office (SETO) Gen 3 program, require accurate measurements of broadband irradiance at levels exceeding 2000 kW/m 2 . In even more extreme scenarios, such as re-entry vehicles, heat levels can surpass 10000 kW/m 2 . Current ISO standards, specifically ISO 14934–2 and ISO 14934–3, are constrained to lower irradiance levels and dependent on black body heat sources, limiting their applicability for high-intensity broadband irradiance measurements, particularly in concentrated solar applications. Here, to address this shortfall, the National Solar Thermal Test Facility (NSTTF) at Sandia National Laboratories (SNL) proposes a calibration method and facility capable of characterizing radiometers up to 2750 kW/m 2 using concentrated solar irradiance. Calibrating with concentrated sunlight is important for solar applications as it aligns the calibration process with the solar spectrum. This alignment is crucial for minimizing systematic errors and avoiding the need for additional corrections that may arise when radiometers designed for solar applications are calibrated using black-body or electrical sources. This paper presents the present day NSTTF characterization facility and procedure, detailing the proposed calibration method and uncertainty quantification. The presented method builds upon 1980′s NSTTF methodology and involves both theoretical and empirical methods to establish a robust relationship between gauge voltage output and irradiance intensity, quantifying both measurement and fitting errors. By addressing the limitations of existing standards and extending the characterization range, this work provides an advancement in the field of high-intensity irradiance measurement and instrumentation characterization.

Gardon gauge↗

NASA NTRS2010

Prospects for Habitable World Detections Using James Webb Space Telescope (JWST)

Doppler and transit surveys are finding extrasolar planets of ever smaller mass and radius, and are now sampling the domain of superEarths. Recent results from the Doppler surveys suggest that discovery of a transiting superEarth in the habitable zone of a lower main sequence star may be possible. We evaluate the prospects for an all-sky transit survey targeted to the brightest stars I that would find the most favorable cases for photometric and spectroscopic characterization using the James Webb Space Telescope. We use the proposed Transiting Exoplanet Survey Satellite (TESS) as representative of an all-sky survey. We couple the simulated TESS yield to a sensitivity model for the MIRI and NIRSpec instruments on JWST. Our sensitivity model includes all currently known and anticipated sources of random and systematic error for these instruments. We focus on the TESS planets with radii between Earth and Neptune. Our simulations consider secondary eclipse filter photometry using JWST/MIRI, comparing the 11- and 15- micron bands to measure carbon dioxide absorption in superEarths, as well as JWST!NIRSpec spectroscopy of water absorption from 1.7-3.0 microns, and carbon dioxide absorption at 4.3 microns. We find that JWST will be capable of characterizing dozens of TESS superEarths with temperatures above the habitable range, using both MIRI and NIRspec. We project that TESS will discover about eight nearby habitable transiting superEarths, all orbiting lower main sequence stars. The principal sources of uncertainty in the prospects for JWST characterization of habitable superEarths are superEarth frequency and the nature of superEarth atmospheres. Based on our estimates of these uncertainties, we project that JWST will be able to measure the temperature, and identify molecular absorptions (water, carbon dioxide) in one to four nearby habitable TESS superEarths orbiting lower main sequence stars.

Deming, Drake↗

NASA NTRS2011

Characterization of Deficiencies in the Frequency Domain Forced Response Analysis Technique for Supersonic Turbine Bladed Disks

Turbine blades in rocket and jet engine turbomachinery experience enormous harmonic loading conditions. These loads result from the integer number of upstream and downstream stator vanes as well as the other turbine stages. Assessing the blade structural integrity is a complex task requiring an initial characterization of whether resonance is possible and then performing a forced response analysis if that condition is met. The standard technique for forced response analysis in rocket engines is to decompose a CFD-generated flow field into its harmonic components, and to then perform a frequency response analysis at the problematic natural frequencies. Recent CFD analysis and water-flow testing at NASA/MSFC, though, indicates that this technique may miss substantial harmonic and non-harmonic excitation sources that become present in complex flows. A substantial effort has been made to account for this denser spatial Fourier content in frequency response analysis (described in another paper by the author), but the question still remains whether the frequency response analysis itself is capable of capturing the excitation content sufficiently. Two studies comparing frequency response analysis with transient response analysis, therefore, of bladed-disks undergoing this complex flow environment have been performed. The first is of a bladed disk with each blade modeled by simple beam elements. Six loading cases were generated by varying a baseline harmonic excitation in different ways based upon cold-flow testing from Heritage Fuel Air Turbine Test. It was hypothesized that the randomness and other variation from the standard harmonic excitation would reduce the blade structural response, but the results showed little reduction. The second study was of a realistic model of a bladed-disk excited by the same CFD used in the J2X engine program. It was hypothesized that enforcing periodicity in the CFD (inherent in the frequency response technique) would overestimate the response. The results instead showed that the transient analysis results were up to 10% higher for "clean" nodal diameter excitations and six times larger for "messy" excitations, where substantial Fourier content around the main harmonic exists. Because the bulk of resonance problems are due to the "clean" excitations, a 10% underprediction is not necessarily a problem, especially since the average response in the transient is similar to the frequency response result, and so in a realistic finite life calculation, the life would be same. However, in the rare cases when the "messy" excitations harmonics are identified as the source of potential resonance concerns, this research does indicate that frequency response analysis is inadequate for accurate characterization of blade structural capability.

Brown, Andrew M.↗

DOE OSTI2017

GaP/GaNP Heterojunctions for Efficient Solar‐Driven Water Oxidation

The growth and characterization of an n‐GaP/i‐GaNP/p + ‐GaP thin film heterojunction synthesized using a gas‐source molecular beam epitaxy (MBE) method, and its application for efficient solar‐driven water oxidation is reported. The TiO 2 /Ni passivated n‐GaP/i‐GaNP/p + ‐GaP thin film heterojunction provides much higher photoanodic performance in 1 m KOH solution than the TiO 2 /Ni‐coated n‐GaP substrate, leading to much lower onset potential and much higher photocurrent. There is a significant photoanodic potential shift of 764 mV at a photocurrent of 0.34 mA cm −2 , leading to an onset potential of ≈0.4 V versus reversible hydrogen electrode (RHE) at 0.34 mA cm −2 for the heterojunction. The photocurrent at the water oxidation potential (1.23 V vs RHE) is 1.46 and 7.26 mA cm −2 for the coated n‐GaP and n‐GaP/i‐GaNP/p + ‐GaP photoanodes, respectively. The passivated heterojunction offers a maximum applied bias photon‐to‐current efficiency (ABPE) of 1.9% while the ABPE of the coated n‐GaP sample is almost zero. Furthermore, the coated n‐GaP/i‐GaNP/p + ‐GaP heterojunction photoanode provides a broad absorption spectrum up to ≈620 nm with incident photon‐to‐current efficiencies (IPCEs) of over 40% from ≈400 to ≈560 nm. The high low‐bias performance and broad absorption of the wide‐bandgap GaP/GaNP heterojunctions render them as a promising photoanode material for tandem photoelectrochemical (PEC) cells to carry out overall solar water splitting.

Kargar, Alireza↗

DOE OSTI2026

Host analysis-guided selection and targeted engineering (HASTE) of Lipomyces tetrasporus for the conversion of CO2-derived feedstocks

Efficient and cost-competitive bioproduction calls for utilizing CO2-derived feedstocks, such as products from electro-reduction of CO2 and hydrolysate from lignocellulosic biomass. However, efficiently using all their carbon components, including acetate, glucose, and xylose, remains a challenge. Here, we characterize Lipomyces tetrasporus, a novel, robust yeast strain capable of effectively assimilating these carbon sources. We used an integrated systems biology approach combining ¹³C metabolic flux analysis, dynamic labeling experiments, and RNA sequencing. We conducted the first metabolic flux analysis for glucose, xylose, and acetate catabolism in this species. Dynamic labeling revealed a highly active TCA cycle during acetate metabolism, evidenced by rapid citrate and malate accumulation. The strain demonstrated strong NADH/NADPH production and acetyl-CoA synthase activity. Using insights and gene targets from this analysis, we engineered L. tetrasporus for malate production. The engineered strain produced 7.5 g/L malic acid (0.25 g/g yield) in shake flasks with glucose-acetate media and 28.8 g/L malic acid at a yield of 0.20 g/g in fed-batch mode with corn-stover hydrolysate. Together, these insights and rational strain engineering establish L. tetrasporus as a versatile, Crabtree-negative platform that is an energy-CO2-bioproduction nexus for channeling CO2 carbon into value-added bioproducts.

Xiao, Zhengyang↗

DOE OSTI2020

Analysis and improvement of the hot disk transient plane source method for low thermal conductivity materials

The hot disk transient plane source (TPS) method is a widely used standard technique (ISO 22007-2) for the characterization of thermal properties of materials, especially the thermal conductivity, k. Despite its well-established reliability for a wide variety of common materials, the hot disk TPS method is also known to suffer from a substantial systematic errors when applied to low-k thermal insulation materials. Here, we present a combined numerical and experimental study on the influence of the geometry of hot disk sensor on measured value of low-k materials. We demonstrate that the error is strongly affected by the finite thickness and thermal mass of the sensor's insulation layer was well as the corresponding increase of the effective heater size beyond the radius of the embedded metal heater itself. We also numerically investigate the dependence of the error on the sample thermal properties, confirming that the errors are worse in low-k samples. A simple correction function is also provided, which converts the apparent (erroneous) result from a standard hot disk TPS measurement to a more accurate value. A standard polyimide sensor was also optimized using both wet and dry etching to provide more accurate measurement directly. Experimentally corrected value of k for Airloy x56 aerogel and a commercial silica aerogel using the numerical correction factor derived based on the standard TPS sensor is in excellent agreement with the directly measured value from the TPS sensor using the optimized polyimide sensor. Finally, both of these methods can reduce the errors to less than 4% as compared to around 40% error of overestimation from raw values measured with the pristine sensor. Such results show that both the numerical correction to a pristine senor or an optimized sensor are capable of providing highly accurate value of thermal conductivity for such materials.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Collisional broadening of nonlinear resonant wave–particle interactions

A general procedure for understanding plasma behaviour when resonant wave–particle interactions are the sole destabilizing and transport mechanism or only heating and/or current drive source is highlighted without recourse to involved numerical or analytical treatments. These phenomena are characterized by transport that appears to be collisionless even though collisions play a central role in narrow collisional boundary layers. The order of magnitude estimates, which include nonlinear effects, are shown to provide expressions in agreement with the principal results of recent toroidal Alfvén eigenmode (TAE), toroidal magnetic field ripple, and heating and current drive treatments. More importantly, the retention of nonlinearities leads to new estimates of the alpha particle energy diffusivity at saturation for TAE modes, and the ripple threshold at which superbanana plateau evaluations of alpha particle transport are modified by nonlinear radial drift effects. In addition, the estimates indicate when quasilinear descriptions for heating and current drive will begin to fail. The phenomenological procedure demonstrates that in magnetic fusion relevant plasmas, narrow collisional boundary layers must be retained for resonant wave–particle interactions as they enhance the role of collisions, and make stochastic particle motion unlikely to be more important than other nonlinear processes.

Physics↗

DOE OSTI2017

Power measurements and coupler optimization in inductive discharges

The power absorbed by the plasma is one of the key parameters which defines processes in any plasma source. This power, however, can be very different from the power at the rf power source output or the coupler terminals, which has been used in many publications to characterize the plasma. This article describes how to find the power absorbed by the plasma and the power lost in the coupler and matcher network for inductively coupled plasmas. In addition, several practical coupler configurations to reduce the coupler coil loss and minimize the rf plasma potential are discussed. Here, we propose an effective and simple method to achieve that by the coupler coil splitting and insertion of the resonating capacitor in the middle of the coil. Our experimental data demonstrate this approach having superior coupler efficiency and substantially lower rf plasma potential.

47 OTHER INSTRUMENTATION↗

DOE OSTI2020

Principal factors in performance of indirect-drive laser fusion experiments

Progress in inertial confinement fusion depends on the accurate interpretation of experiments that are complex and difficult to explain with simulations. Results could depend on small changes in the laser pulse or target or physics that are not fully understood or characterized. In this paper we discuss an x-ray-driven platform with fewer sources of degradation, and find the fusion yield can be described as a physically motivated function of laser energy, target scale, and implosion symmetry. Furthermore, this platform and analysis could enable a more experimental approach to the study and optimization of implosion physics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Synchrotron Catalysis Consortium (SCC) at NSLS-II: Dedicated Beamline Facilities for In Situ and Operando Characterization of Catalysts

The Synchrotron Catalysis Consortium (SCC) was funded and established in September 2005 at the National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory (BNL). For more than a decade, the SCC was the first of its kind in the United States, with a mission to promote the utilization of synchrotron techniques for cutting-edge catalysis research under in-situ conditions. The consortium consists of three Principal Investigators (Jingguang Chen, Columbia University, Anatoly Frenkel, Stony Brook University/BNL, and Jose Rodriguez, BNL) and scientific staff member Nebojsa Marinkovic. The initial team also included Radoslav Adzic, BNL, and collaborators from academic, national, and industrial laboratories. During the first decade of its operations at three NSLS beamlines (X18A, X18B, and X19A) until the closing of NSLS on September 30, 2014, the primary goal of the SCC team was to provide assistance and to develop new sciences/techniques to the catalysis community...This report outlines a brief history, specifications, techniques, and training and outreach for the facility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2019

An improved understanding of the roles of atomic processes and power balance in divertor target ion current loss during detachment

The process of divertor detachment, whereby heat and particle fluxes to divertor surfaces are strongly diminished, is required to reduce heat loading and erosion in a magnetic fusion reactor to acceptable levels. In this paper, the physics leading to the decrease of the total divertor ion current ($I_t$), or ‘roll-over’, is experimentally explored on the TCV tokamak through characterization of the location, magnitude and role of the various divertor ion sinks and sources including a complete analysis of particle and power balance. These first measurements of the profiles of divertor ionisation and hydrogenic radiation along the divertor leg are enabled through novel spectroscopic techniques. Over a range in TCV plasma conditions (plasma current and electron density, with/ without impurity-seeding) the $I_t$ roll-over is ascribed to a drop in the divertor ion source; recombination remains small or negligible farther into the detachment process. Further, the ion source reduction is driven by both a reduction in the power available for ionization, $P_{\text{recl}}$, and concurrent increase in the energy required per ionisation, $E_{\text{ion}}$: this effect of power available on the ionization source is often described as ‘power starvation’ (or ‘power limitation’). The detachment threshold is found experimentally (in agreement with analytic model predictions) to be ~$P_{\text{recl}}/I_tE_{\text{ion}}$ ~ 2, corresponding to a target electron temperature, $T_t ~ E_{\text{ion}}/γ$ where $\gamma$ is the sheath transmission coefficient. The target pressure reduction, required to reduce the target ion current, is driven both by volumetric momentum loss as well as upstream pressure loss. The measured evolution through detachment of the divertor profile of various ion sources/ sinks as well as power losses are quantitatively reproduced through full 2D SOLPS modelling through the detachment process as the upstream density is varied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Results from the FOCAL Experiment Campaign 1: Turbine Control Co-Design

This paper summarizes the scaling approach and results from the first experimental campaign of the Floating Offshore-wind and Controls Advanced Laboratory (FOCAL) Experimental Program, which is focused on developing public data sets to support the validation of numerical models for floating wind control co-design. A 1:70 Froude-scale performance-matched model of the IEA Wind 15-MW reference turbine was designed, built, and characterized on a fixed base. The National Renewable Energy Laboratory's Reference Open-Source COntroller (ROSCO) was integrated into the scale testing to examine the impact advanced turbine and generator control strategies have on turbine performance and loads, enabling validation of control strategies for floating wind design optimization.

17 WIND ENERGY↗

DOE OSTI2021

Cloud condensation nuclei characteristics at the Southern Great Plains site: role of particle size distribution and aerosol hygroscopicity

The activation ability of aerosols as cloud condensation nuclei (CCN) is crucial in climate and hydrological cycle studies, but their properties are not well known. We investigated the long-term measurements of atmospheric aerosol properties, CCN concentrations (N CCN ) at supersaturation (SS = 0.1%–1.0%), and hygroscopicity at the Department of Energy's Southern Great Plains (SGP) site to illustrate the dependence of N CCN on aerosol properties and transport pathways. Cluster analysis was applied to the back trajectories of air masses to investigate their respective source regions. The results showed that aged biomass burning aerosols from Central America were characterized by higher accumulation mode particles (N accu ; median value 805 cm -3 ) and relatively high aerosol hygroscopicity (κ; median value ~0.25) values that result in the higher CCN activation and relatively high N CCN (median value 258–1578 cm -3 at a SS of 0.1%–1.0%). Aerosols from the Gulf of Mexico were characterized by higher N accu (~35%), and N CCN (230–1721 cm -3 at a SS of 0.1%–1.0%) with the lowest κ (~0.17). In contrast, relatively high nucleation mode particles (N nucl ; ~20%) and low N CCN (128–1553 cm -3 at a SS of 0.1%–1.0%) with higher κ (~0.30) values were observed on the aerosols associated with a westerly wind. The results indicate particle size as the most critical factor influencing the ability of aerosols to activate, whereas the effect of chemical composition was secondary. Our CCN closure analysis suggests that chemical composition and mixing state information are more crucial at lower SS, whereas at higher SS, most particles become activated regardless of their chemical composition and size. This study affirms that soluble organic fraction information is required at higher SS for better N CCN prediction, but both the soluble organics fraction and mixing state are vital to reduce the N CCN prediction uncertainty at lower SS.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Multi-sensor anomalous change detection in remote sensing imagery

Combining multiple satellite remote sensing sources provides a far richer, more frequent view of the earth than that of any single source; the challenge is in distilling these petabytes of heterogeneous sensor imagery into meaningful characterizations of the imaged areas. Meeting this challenge requires effective algorithms for combining multi-modal imagery over time to identify subtle but real changes among the intrinsic data variation. Here, we implement a joint-distribution framework for multi-sensor anomalous change detection (MSACD) that can effectively account for these differences in modality, and does not require any signal resampling of the pixel measurements. This flexibility enables the use of satellite imagery from different sensor platforms and modalities. We use multi-year construction of the SoFi Stadium in California as our testbed, and exploit synthetic aperture radar imagery from Sentinel-1 and multispectral imagery from both Sentinel-2 and Landsat 8. We show results for MSACD using real imagery with implanted, measurable changes, as well as real imagery with real, observable changes, including scaling our analysis over multiple years.

47 OTHER INSTRUMENTATION↗

DOE OSTI2024

Jackson, L., Johnson, M.B., Latrach, A., Grimes, D., Martinez, C., and Mclaughlin, J.F., 2024, Multidisciplinary geotechnical data collection, curation, and analysis for conformity with the regulatory framework for geologic carbon storage in Wyoming, USA: Geological Society of America Abstracts with Programs. Vol. 56, No. 5, 2024, doi: 10.1130/abs/2024AM-405024

Title: Multidisciplinary Geotechnical Data Collection, Curation, and Analysis for Conformity with the Regulatory Framework for Geologic Carbon Storage in Wyoming, USA. Text: Construction and operation of wells for geologic sequestration of carbon dioxide necessitate that they are permitted under the Environmental Protection Agency’s Underground Injection Control Class VI requirements. Class VI wells conform to stringent requirements to ensure long-term safety and integrity of the storage site and the protection of Underground Sources of Drinking Water. Entities pursuing Class VI permitting must provide comprehensive geologic site characterization, including regional geologic structure and stratigraphy, aquifer information, reservoir and confining unit geomechanical properties, geochemical analyses, assessment of trapping capacity and mechanisms, and a variety of other of multidisciplinary geotechnical data. The Wyoming Class VI Site Characterization Database Project is focused on developing a geologic site characterization database of geotechnical information, which has been compiled and verified from established, public databases/entities and scientific literature to expedite Class VI permitting in Sweetwater County within the Greater Green River Basin of southern Wyoming. The preliminary suite of compiled data from 14,000 wells includes 8,000 wells with logs and 7,250 wells with formation tops, ~70 wells with core data (e.g., X-Ray diffraction, petrographic, and petrophysical data), ~2,500 water analyses, ~740 seismic events data, and ~520 bottom-hole temperature measurements. Future work on—and stemming from—this project will include new core analyses, calculation and interpolation of subsurface temperature gradients, mechanical earth models, geochemical simulations, storage capacity estimation, stratigraphic column generation and correlation, and construction of subsurface maps. Finally, this work will help to inspire and facilitate subsurface data compilation and curation beyond Sweetwater County, Wyoming.

42 ENGINEERING↗

DOE OSTI2020

First impurity powder injection experiments in LHD

Injection of impurities in the form of sub-millimeter powder grains is performed for the first time in the Large Helical Device (LHD) plasma, employing the Impurity Powder Dropper (IPD) [A. Nagy et al., RSI 2018], developed and built by PPPL. Controlled amounts of boron (B) and boron nitride (BN) powder are injected into the helical plasma. Visible camera imaging, UV and charge exchange spectroscopy measurements show that the injected impurities effectively penetrate into the plasma in two different magnetic configurations.The prompt effects of the impurities on the plasma are characterized as the injection rate is scanned. The injected impurities provide a supplemental electron source, causing the plasma density to increase, together with the radiated power. Beneficial effects on the confined plasma temperature are observed at low plasma densities, due to an increased efficiency in NBI power absorption. For $n_{e,av}<10^{19}m^{-3}$ the powder grains penetrate deeper into the plasma, as they can be less effectively deflected by the plasma flow in the divertor leg, which they have to cross first as they are injected from the top of the machine.In this case, the created B ions are observed to move outwards from UV spectroscopy and charge exchange measurements, due to the outwards direction of the radial electric field. This makes low density plasmas a better candidate for powder boronization techniques.

Boron↗