Search NASA⌕ Search

SEARCH · Search NASA

Results for “texturization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Microstructure, mechanical properties and microtexture of friction stir welded S690QL high yield steel

Two try-out campaigns of friction stir welding (FSW) were performed with different friction parameters to join S690QL high yield strength steel. The welds were investigated at macroscopic and microscopic scales using optical and electronic microscopy and microhardness mapping. Welds of the second campaign exhibit microstructures and mechanical properties in accordance with requirements for service use. Microtexture measurements were carried out in different zones of welds by electron backscattered diffraction (EBSD). It is shown that that texture of the bottom of the weld is similar to that of the base metal, suggesting a diffusion bonding mechanism. Finally, the mechanical properties (tensile strength, resilience, bending) were established on the most promising welds. It is shown that it is possible to weld this high yield strength steel using FSW process with satisfactory geometric, microstructural and mechanical properties. - Highlights: •1000 mm ∗ 400 mm ∗ 8 mm S690QL steel plates are joined by friction stir welding (FSW). •Maximum hardness is reduced by optimization of process parameters. •Various microstructures are formed but no martensite after process optimization. •Texture is modified in mechanically affected zones of the weld. •Texture in the bottom of the weld is preserved, suggesting diffusion bonding.

36 MATERIALS SCIENCE↗

Physical and electrical properties of melt-spun Fe-Si (3–8 wt.%) soft magnetic ribbons

Highlights: • Increasing processing wheel speed during melt spinning refined both the ribbon cross-sectional thickness and grain size. • Mössbauer studies indicated Si content influenced the number of Fe sites and the magnetic field/structural environments. • Vickers hardness and the elastic modulus were observed to increase in response to elevated Si content and wheel speed. • Increasing Si content diluted the magnetization. - Abstract: Fe-Si alloys ranging from 3 to 8 wt% Si were rapidly solidified using melt spinning. Wheel speeds of 30 m/s and 40 m/s were employed to vary cooling rates. Mössbauer spectroscopic studies indicated the Si content significantly influenced the number of Fe sites, relative abundance of various Fe species, and internal magnetic fields/structural environments. Wheel speed altered Fe speciation only in the 3 wt% sample. Scanning electron microscopy confirmed that increasing the wheel speed refined both the ribbon thickness and grain size. Electron backscatter diffraction results suggest tailoring melt spinning process parameters and alloy chemistry may offer the ability to manipulate {001} texture development. Electrical resistivity measurements were observed to increase in response to elevated Si content. Increased hardness was correlated to elevated Si content and wheel speed.

36 MATERIALS SCIENCE↗

Effects of rolling processes on ridging generation of ferritic stainless steel

Highlights: • The effects of microstructural refinement and texture on ridging are analysed. • Optimal reduction during cold rolling benefits the enhancement of ridging resistance. • A Steckel-mill rolling method is proposed to improve ridging resistance of FSS 430. • 30% of ridging height reduction can be achieved with proposed rolling method. - Abstract: In order to reduce the ridging generation of ferritic stainless steel (FSS) during forming process, the crystallographic texture of the FSS was modified by optimisation of both rolling and annealing processes. A systematic study was carried out to improve the ridging resistance of the FSS by investigating the sequential changes in microstructure and texture during different rolling and annealing processes. The results show that the surface roughness of the final sheet strained by 20% along the rolling direction is decreased by 20% to 30% using Steckel-mill rolling compared to traditional tandem rolling. A direct correlation is found between the ridging resistance of the FSS and the rolling routines. It has been observed that an optimal reduction value during cold rolling process is critical to the microstructural refinement and surface quality improvement of the FSS. Reduction of the fraction of {001} <110> component by optimisation of the rolling processes is found to be effective in reducing the ridging height of the FSS during the formation process.

36 MATERIALS SCIENCE↗

Abnormal grain growth driven by high-temperature proton irradiation in nanocrystalline Ni

In this research we examine a nanocrystalline Ni thin film exposed to high-temperature proton irradiation and compare it with as-deposited and annealed-only counterparts. Despite lacking thermal spikes typical of heavy ions, 400 °C proton irradiation drives pronounced grain growth in select grains, whereas annealing alone yields only modest coarsening. Grain-boundary statistics show fewer low-angle boundaries (10–20°) and more high-angle boundaries (55–60°), consistent with irradiation-enhanced mobility of high-misorientation boundaries. The irradiated films retain a random texture, with no evidence of texture development or sharpening. Mechanisms, such as radiation-enhanced grain boundary diffusion, beam-induced heating, and ion channeling-mediated selective grain growth, are unlikely to be the predominant drivers to explain the resultant microstructure. Instead, we suggest irradiation-induced modifications of grain-boundary structure, including possible complexion transitions, as one plausible explanation for this selective grain growth and retention of random texture. However, additional temperature–dose studies are required to confirm the mechanism.

36 MATERIALS SCIENCE↗

Magnetotransport properties of c-axis oriented La{sub 0.7}Sr{sub 0.3}MnO{sub 3} thin films on MgO-buffered SiO{sub 2}/Si substrates

c-axis oriented La{sub 0.7}Sr{sub 0.3}MnO{sub 3} (LSMO) films on MgO-buffered SiO{sub 2}/Si substrates were prepared, and their texture, microstructure, and magnetotransport properties were studied and compared to epitaxial LSMO/MgO (001) and polycrystalline LSMO/SiO{sub 2}/Si films. c-axis oriented MgO buffer layers were obtained on amorphous SiO{sub 2} layer through rf sputter deposition at low substrate temperature and consequent postannealing processes. In situ pulsed laser deposition-grown LSMO films, deposited on the MgO layer, show strong c-axis texture, but no in-plane texture. The c-axis oriented LSMO films which are magnetically softer than LSMO/SiO{sub 2}/Si films exhibit relatively large low field magnetoresistance (LFMR) and sharper MR drop at lower field. The large LFMR is attributed to a spin-dependent scattering of transport current at the grain boundaries.

36 MATERIALS SCIENCE↗

CHARACTERIZATION OF THE LEVEL OF PLASTIC DEFORMATION IN COLD-ROLLED TI-6AL-4V SAMPLES BY THERMOELECTRIC POWER MEASUREMENTS

This paper presents experimental data that illustrates the intrinsic sensitivity of the thermoelectric contact technique based on the Seebeck effect, in order to detect the presence of anisotropy due to plastic deformation produced by the manufacturing process of cold working at different degrees of reduction in thickness, namely 40, 60 and 80% in Ti-6AL-4V. The results describe the behaviour of the thermoelectric power (TEP) coefficient with respect to the anisotropy and microstructure in a highly textured material that presents both morphological and crystallographic texture. Ultrasonic measurements of shear wave velocity were also conducted in order to obtain a direct correlation between the presence of a significant anisotropy in the cold-rolled Ti-6AL-4V samples and the TEP measurements, before and after heat treatment (annealing). TEP measurements offer a means to assess the evolution of the level of plastic deformation, which allows for a better correlation between texture-induced anisotropy and the material microstructural and properties.

36 MATERIALS SCIENCE↗

Residual stress and magnetic behavior of multiferroic CoFe{sub 2}O{sub 4}/Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3} thin films

Multiferroic composite thin films consisting of CoFe{sub 2}O{sub 4} (CFO) and Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3} (PZT) layers were deposited through a combined route of rf magnetron sputtering and sol gel on Pt(111)/TiO{sub 2}/SiO{sub 2}/Si substrates. The coupling effects in the bilayered thin film were studied by looking at the relationships among the crystallite orientation, magnetic behavior, and the in-plane residual stress. Phase selective residual stress analysis conducted by using x-ray method demonstrated a close correlation between the stress imposed on the PZT layer and its texture. A change in the PZT layer orientation from (111) to (010) with the increasing layer thickness was observed in the multiferroic thin film as the system changes from an interface energy minimizing texture to a strain energy density minimizing texture. The CFO phase in the multiferroic thin films was preferably oriented in the (111) orientation. However, there is a change in magnetization as well as coercivity of the multiferroic thin films when the top PZT layer was varied in thickness. A close correlation between the magnetization and the in-plane stress in the CFO bottom layer imposed by the PZT film thickness was observed.

36 MATERIALS SCIENCE↗

A Quantitative Analysis of Room Temperature Recrystallization Kinetics in Electroplated Copper Films using High Resolution X-ray Diffraction

Time-resolved in situ x-ray diffraction measurements were used to study the room-temperature recrystallization kinetics of electroplated copper thin films with thicknesses between 400 and 1000 nm. The thinnest films exhibited limited recrystallization and subsequent growth of grains, while recrystallized grains in the thicker films grew until all as-plated microstructure was consumed. For all films, recrystallized grains that belonged to the majority texture component, <111>, started growing after the shortest incubation time. These grains exhibited volumetric growth until they achieved the film thickness. After this point the growth mode became planar, with the <111>-type grains growing in the plane of the film. Grains with the <111> direction normal to the film surface started growing after the <111>-type grains switched to planar growth. However, the planar growth of this texture component finished at the same time as the growth of the <111> grains. Profile fitting of the 111 peak permitted the separation of the diffraction signals from recrystallized and as-plated grain populations. The average strains in these two populations, calculated from the peak position of the corresponding {l_brace}111{r_brace} reflections, were different, indicating a heterogeneous stress state within this texture component. The increasing volume fraction of recrystallized <111> grains with time was monitored via the variation in the diffracted intensity. This variation could be represented by the Johnson-Mehl-Avrami-Kolmogorov model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structure and magnetic properties of L1{sub 0}-FePt thin films on TiN/RuAl underlayers

Highly ordered L1{sub 0} FePt-oxide thin films with small grains were prepared by using a RuAl layer as a grain size defining seed layer along with a TiN barrier layer. Different HAMR (Heat Assisted Magnetic Recording) favorable underlayers were studied to encourage perpendicular texture and preferred microstructure. It was found that the epitaxial and small grain growth from the RuAl/TiN underlayer results in small and uniform grains in the FePt layer with perpendicular texture. By introducing the grain size defining underlayers, the FePt grain size can be reduced from 30 to 6 nm with the same volume fraction (9%) of SiO{sub 2} in the film, excellent perpendicular texture, and very high order parameter at 520 deg. C.

36 MATERIALS SCIENCE↗

Growth of (111) oriented NiFe{sub 2}O{sub 4} polycrystalline thin films on Pt (111) via sol-gel processing

Polycrystalline NiFe{sub 2}O{sub 4} (NFO) thin films are grown on (111) platinized Si substrates via chemical solution processing. {theta}-2{theta} x-ray diffraction, x-ray pole figures and electron diffraction indicate that the NFO has a high degree of <111> uniaxial texture normal to the film plane. The texturing is initiated by nucleation of (111) planes at the Pt interface and is enhanced with decreasing film thickness. As the NFO magnetic easy-axis is <111>, the out-of-plane magnetization exhibits improved M{sub r}/M{sub s} and coercivity with respect to randomly oriented films on silicon substrates. The out-of-plane M{sub r}/M{sub s} ratio for (111) textured NFO thin film is improved from 30% in 150 nm-thick films to above 70% in 50 nm-thick films. The improved out-of-plane magnetic anisotropy is comparable to epitaxial NFO films of comparable thickness deposited by pulsed laser deposition and sputtering.

36 MATERIALS SCIENCE↗

FePtCu alloy thin films: Morphology, L1{sub 0} chemical ordering, and perpendicular magnetic anisotropy

Rapid thermal annealing was applied to transform sputter-deposited Fe{sub 51}Pt{sub 49}/Cu bilayers into L1{sub 0} chemically ordered ternary (Fe{sub 51}Pt{sub 49}){sub 100-x}Cu{sub x} alloys with (001) texture on amorphous SiO{sub 2}/Si substrates. It was found that for thin film samples, which were processed at 600 Degree-Sign C for 30 s, the addition of Cu strongly favors the L1{sub 0} ordering and (001) texture formation. Furthermore, it could be revealed by transmission electron microscopy and electron backscatter diffraction that the observed reduction of the ordering temperature with Cu content is accompanied by an increased amount of nucleation sites forming L1{sub 0} ordered grains. The change of the structural properties with Cu content and annealing temperature is closely related to the magnetic properties. While an annealing temperature of 800 Degree-Sign C induces strong perpendicular magnetic anisotropy (PMA) in binary Fe{sub 51}Pt{sub 49} films, the addition of Cu systematically reduces the PMA. However, due to the enhancement of both the A1-L1{sub 0} phase transformation and the development of the (001) texture with increasing Cu content, lowering of the annealing temperature leads to a shift of the maximum perpendicular magnetic anisotropy towards alloys with higher Cu content. Thus, for an annealing temperature of 600 Degree-Sign C, the highest perpendicular magnetic anisotropy energy is found for the (Fe{sub 51}Pt{sub 49}){sub 91}Cu{sub 9} alloy. The smooth surface morphology, adjustable PMA, and high degree of intergranular exchange coupling make these films suitable for post-processing required for specific applications such as for sensorics or magnetic data storage.

36 MATERIALS SCIENCE↗

Microstructural evolution of nanocrystalline nickel thin films due to high-energy heavy-ion irradiation

This initial feasibility study demonstrates that recent advancements in precession electron diffraction microscopy can be applied to nanostructured metals exposed to high displacement damage from a Tandem accelerator. In this study, high purity, nanocrystalline, free-standing nickel thin films produced by pulsed laser deposition were irradiated with approximately 3 Multiplication-Sign 10{sup 14} ions/cm{sup 2} of 35 MeV Ni{sup 6+} ions resulting in an approximately uniform damage profile to approximately 16 dpa. Pristine and ionirradiated regions of the nanocrystalline Ni films were characterized by conventional transmission electron microscopy and precession electron diffraction microscopy. Precession electron diffraction microscopy provided additional insight into the texture, phase, and grain boundary distribution resulting from the displacement damage that could not be obtained from traditional electron microscopy techniques. For the nanocrystalline nickel film studied, this included the growth in number and percentage of a metastable hexagonal closed packed phase grains and the formation of large <001> textured face centered cubic grains. The application of precession electron diffraction microscopy to characterize other nanocrystalline metals, which are being considered for radiation tolerant applications, will permit a comparison of materials that goes beyond the dominant length scale to consider the effects of local phase, texture, and grain boundary or interface information.

36 MATERIALS SCIENCE↗

Towards engineered branch placement: Unreal™ match between vapour-liquid-solid glancing angle deposition nanowire growth and simulation

The vapour-liquid-solid glancing angle deposition (VLS-GLAD) process is capable of producing complex nanotree structures with control over azimuthal branch orientation and height. We have developed a thin film growth simulation including ballistic deposition, simplified surface diffusion, and droplet-mediated cubic crystal growth for the VLS-GLAD process using the Unreal{sup TM} Development Kit. The use of a commercial game engine has provided an interactive environment while allowing a custom physics implementation. Our simulation's output is verified against experimental data, including a volumetric film reconstruction produced using focused ion beam and scanning-electron microscopy (SEM), crystallographic texture, and morphological characteristics such as branch orientation. We achieve excellent morphological and texture agreement with experimental data, as well as qualitative agreement with SEM imagery. The simplified physics in our model reproduces the experimental films, indicating that the dominant role flux geometry plays in the VLS-GLAD competitive growth process responsible for azimuthally oriented branches and biaxial crystal texture evolution. The simulation's successful reproduction of experimental data indicates that it should have predictive power in designing novel VLS-GLAD structures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Orientation-controlled nonepitaxial L1{sub 0} FePt thin films

We report an orientation-controlled FePt thin films grown nonexpitaxially on oxidized Si substrates without using any underlayers. After 700 °C annealing, the FePt single layer with thickness less than 10 nm shows good (001) texture and perpendicular anisotropy. The scanning electron microscope images indicate that these films are composed of isolated islands. For the films thicker than 20 nm, the films become continuous and (111) orientation appears. The transition of film texture relates to the change of morphology of the films. Finally, a theoretical mode based on minimizing surface energy is proposed to explain the texture variation in the films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of reactively sputtered c-axis aligned nanocrystalline InGaZnO{sub 4}

Crystallinity and texturing of RF sputtered c-axis aligned crystal InGaZnO{sub 4} (CAAC IGZO) thin films were quantified using X-ray diffraction techniques. Above 190 °C, nanocrystalline films with an X-ray peak at 2θ = 30° (009 planes) developed with increasing c-axis normal texturing up to 310 °C. Under optimal conditions (310 °C, 10% O{sub 2}), films exhibited a c-axis texture full-width half-maximum of 20°. Cross-sectional high-resolution transmission electron microscopy confirmed these results, showing alignment variation of ±9° over a 15 × 15 nm field of view and indicating formation of much larger aligned domains than previously reported. At higher deposition temperatures, c-axis alignment was gradually lost as polycrystalline films developed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the pressure effect in energetic deposition of Cu thin films by modulated pulsed power magnetron sputtering: A global plasma model and experiments

The modulated pulsed power magnetron sputtering (MPPMS) discharge processes are numerically modeled and experimentally investigated, in order to explore the effect of the pressure on MPPMS discharges as well as on the microstructure of the deposited thin films. A global plasma model has been developed based on a volume-averaged global description of the ionization region, considering the loss of electrons by cross-B diffusion. The temporal variations of internal plasma parameters at different pressures from 0.1 to 0.7 Pa are obtained by fitting the model to duplicate the experimental discharge data, and Cu thin films are deposited by MPPMS at the corresponding pressures. The surface morphology, grain size and orientation, and microstructure of the deposited thin films are investigated by scanning electron microscopy, transmission electron microscopy, and x-ray diffraction. By increasing the pressure from 0.1 to 0.7 Pa, both the ion bombardment energy and substrate temperature which are estimated by the modeled plasma parameters decrease, corresponding to the observed transition of the deposited thin films from a void free structure with a wide distribution of grain size (zone T) into an underdense structure with a fine fiber texture (zone 1) in the extended structure zone diagram (SZD). The microstructure and texture transition of Cu thin films are well-explained by the extended SZD, suggesting that the primary plasma processes are properly incorporated in the model. The results contribute to the understanding of the characteristics of MPPMS discharges, as well as its correlation with the microstructure and texture of deposited Cu thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomistic modeling of dropwise condensation

The basic aim of the atomistic modeling of condensation of water is to determine the size of the stable cluster and connect phenomena occurring at atomic scale to the macroscale. In this paper, a population balance model is described in terms of the rate equations to obtain the number density distribution of the resulting clusters. The residence time is taken to be large enough so that sufficient time is available for all the adatoms existing in vapor-phase to loose their latent heat and get condensed. The simulation assumes clusters of a given size to be formed from clusters of smaller sizes, but not by the disintegration of the larger clusters. The largest stable cluster size in the number density distribution is taken to be representative of the minimum drop radius formed in a dropwise condensation process. A numerical confirmation of this result against predictions based on a thermodynamic model has been obtained. Results show that the number density distribution is sensitive to the surface diffusion coefficient and the rate of vapor flux impinging on the substrate. The minimum drop radius increases with the diffusion coefficient and the impinging vapor flux; however, the dependence is weak. The minimum drop radius predicted from thermodynamic considerations matches the prediction of the cluster model, though the former does not take into account the effect of the surface properties on the nucleation phenomena. For a chemically passive surface, the diffusion coefficient and the residence time are dependent on the surface texture via the coefficient of friction. Thus, physical texturing provides a means of changing, within limits, the minimum drop radius. The study reveals that surface texturing at the scale of the minimum drop radius does not provide controllability of the macro-scale dropwise condensation at large timescales when a dynamic steady-state is reached.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evolution of magnetic bubble domains in the uniaxial ferromaget CeRu 2 Ga 2 B inferred from the Hall effect and ac magnetic susceptibility

We study the Hall effect, AC magnetic susceptibility (χ ac ), and magnetic force microscopy of the uniaxial ferromagnet CeRu 2 Ga 2 B with a centrosymmetric crystal structure. We observe a finite topological Hall effect (THE) within the ordered phase, before the magnetization is polarized by applied field. By comparing the field dependences of the area fraction of the magnetic bubbles, the derivative of χ ac , and the THE signal, we deduce that the magnetic bubbles in CeRu 2 Ga 2 B evolve from the trivial to topological spin texture with field. Our findings enable the expansion of the search for magnetic materials hosting topological spin textures to include uniaxial ferromagnets and open a new possibility to tailor the topological spin texture.

AC magnetic susceptibility↗