Search NASA⌕ Search

SEARCH · Search NASA

Results for “BALLISTICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Chemical nonequilibrium effects on flowfields for aeroassist orbital transfer vehicles

Acceptable altitude and velocity ranges for the perigee of aeroassist orbital transfer vehicles (AOTV) have been determined for various values of ballistic coefficient and lift-to-drag ratio. The chemical nonequilibrium effect on the flowfield of a simple but representatively high-drag, blunt configuration was investigated for these perigee conditions, ranging from 73 to 90 km in altitude and 8 to 9.3 km/s in velocity. The analysis was performed using a two-dimensional viscous-shock-layer code which had previously demonstrated good success in predicting nonequilibrium heating on the Space Shuttle. The results indicate lower ratio of nonequilibrium/equilibrium heating for the present AOTV perigee conditions than for the Shuttle flight conditions, due to higher velocity. The trend for the degree of nonequilibrium with the effect of varying wall catalycity and configuration was determined over the altitude range. Some implications to future design consideration are stated.

Shinn, J. L.↗

Spectrophotometric studies of the Io Torus

A toroidal volume near Io's orbit is made luminous by multiple optical and ultraviolet line emissions excited by resonant scattering of sunlight and by electron collisions. These emitting atoms and ions have been lost from Io. The spectrophotometric measurements of these emissions and their physical interpretation are considered. It is now known that the flow of material from Io dominates the particle and energy budgets of the Jovian magnetosphere. The observed emitting species in the Io torus are examined, and the atomic clouds are discussed, taking into account morphology and kinematics, atomic cloud supply rates, ion-atom collisions, and charge-exchange collisions. Observations and studies concerning the plasma torus are reported, giving attention to the forbidden lines, the extreme ultraviolet lines, and aspects of ion temperature and spatial distribution. Two types of radial transport in the Io torus include the ballistic motion of neutrals escaping from Io and the cross-L transport of ions.

Brown, R. A.↗

Effects of AP particle size on combustion response to crossflow

An analytical model is developed for the linearized velocity-coupled combustion response function. The model treats elements of response to perturbations in pressure, in composition due to the heterogeneity of composite propellants, and in crossflow velocity. The effects of AP particle size are accounted for in terms of effects on controlling ballistics properties and in terms of fluctuations in propellant composition. There are two facets of the crossflow problem: the effect of crossflow velocity on the various response elements, and the response to velocity perturbations. Both are dealt with in this paper. Important trends derived from series of parametric computations are described.

Cohen, N. S.↗

Albedo asymmetry of Iapetus

Observational data for Iapetus and other Saturn moons are used to show that the dark areas on Iapetus feature organic chromophores caused by UV irradiation of CH4-rich ice. The Iapetus albedo pattern, brighter at the poles and in the trailing hemisphere, is suggested to originate from ballistic impact redistribution of surface material in terms of an impact flux gradient. The orange/violet color ratios from Voyager imagery were measured as 1.46 for the leading hemisphere and 1.24 for the trailing hemisphere. The evolution of the Iapetus regolith during processes of ice evaporation, impact ablation, material transport, and chemical alteration is discussed for factors causing the albedo asymmetry. Comparisons of surface features of Titan, Oberon,, and Hyperion with those of Iapetus indicate a balance may exist between UV photochemistry and ablation on Iapetus, with the impact gradient having been determined by the tidally locked revolution of the moon. Voyager 2 data on the uranian moons are expected to offer confirmation or denial of the model.

Squyres, S. W.↗

Aerocapture and aeroassisted orbital transfer - A high performance leverage space technology

Single pass aerocapture and aeroassisted orbital transfer designs are discussed for modifying spacecraft orbits using planetary atmospheres. Aerodynamic drag can be used to shift a hyperbolic flyby trajectory to a planetary orbit by having the spacecraft altering its in-plane L/D ratio to maintain constant drag until the desired velocity is attained. The spacecraft would then move out of the atmosphere, sometimes with a small propulsive assist. Sample missions to Uranus, Jupiter, and Titan are mentioned, with mission scenarios commencing with a Shuttle launch. Biconic-shaped spacecraft are cited as having the best L/D for insertion accuracy, a low hypersonic ballistic coefficient, and volumeric efficiency. Aeroassisted orbital transfer involves atmospheric braking in order to shed velocity on a return trip from higher orbits. No decision has yet been made as to the spacecraft shape, but calculations indicate that aeroassist braking before return to LEO for rendezvous with the Shuttle has the potential for the lowest cost/mass to GEO of any delivery system currently under consideration.

Cruz, M. I.↗

Application of holography to flow visualization

Laser holographic interferometry is being applied to many different types of aerodynamics problems. These include two and three dimensional flows in wind tunnels, ballistic ranges, rotor test chambers and turbine facilities. Density over a large field is measured and velocity, pressure, and mach number can be deduced.

Lee, G.↗

Space Aging of Solid Rocket Materials (P0005)

The objective of this experiment is to determine the effects of long-term orbital exposure on the materials used in solid-rocket space motors. Specifically, structural materials and propellants from the STAR/PAM-D series motors and the PAM DII/IPSM-II motors will be tested, as well as advanced composite case and nozzle materials planned for future use. The experiment approach is to expose samples of solid-rocket propellant, liner, insulation, case, and nozzle specimens to the space environment and to compare preflight and postflight measurements of various mechanical, chemical, and ballistic properties.

Leon L Jones↗

Separation processes during binary monotectic alloy production

Observation of microgravity solidification processes indicates that outside of sedimentation, at least two other important effects can separate the phases: critical-point wetting and spreading; and thermal migration of second-phase droplets due to interfacial tension gradients. It is difficult to study these surface tension effects while in a unit gravity field. In order to investigate the processes occurring over a temperature range, i.e., between a consolute point and the monotectic temperature, it is necessary to use a low-gravity environment. The MSFC drop tube (and tower), the ballistic trajectory KC-135 airplane, and the Space Shuttle are ideal facilities to aid formation and testing of hypotheses. Much of the early work in this area focuses on transparent materials so that process dynamics may be studied by optical techniques such as photography for viewing macro-processes; holography for studying diffusional growth; spinodal decomposition and coalescence; ellipsometry for surface wetting and spreading effects; and interferometry and spectroscopy for small-scale spatial resolution of concentration profiles.

Frazier, D. O.↗

Stagnation-point ablation of carbonaceous flat disks. I Theory

The process of ablation is calculated for the stagnation region of a flat disk in a radiation-dominated, massive-blowing environment produced in a ballistic range filled with argon. Flow environments are determined by solving the boundary-layer equations while radiative transfer is calculated through a line-by-line spectral computation. The resulting wall heat-transfer rates are coupled with an existing material's response code to determine surface recession and char thickness. The calculation is performed for six 5-cm-diam models made of carbon-phenolic and carbon-carbon composite launched in the Track-G facility at the Arnold Engineering Development Center. Significant surface recessions are predicted to occur for these models due mostly to radiative heating.

Park, C.↗

Martian rampart crater ejecta - Experiments and analysis of melt-water interaction

The possible effects of explosive water vaporization on ejecta emplacement after impact into a wet target are described. A general model is formulated from analysis of Viking imagery of Mars and experimental vapor explosions as well as consideration of fluidized particulate transport and lobate volcanic deposits. The discussed model contends that as target water content increases, the effects of vapor expansion due to impact increasingly modify the ballistic flow field during crater excavation. This modification results in transport by gravity-driven surface flowage, and is similar to that of atmospheric drag effects on ejecta modelled by Schultz and Gault (1979).

Wohletz, K. H.↗

Bunte Breccia of the Ries - Continuous deposits of large impact craters

The 26-km-diameter Ries impact crater in south Germany and the mechanism of ejection and emplacement associated with its formation about 15 Myr ago are discussed in detail, and the implications of the findings for models of crater formation on earth, moon, and planets are considered. Field observations and laboratory tests on 560-m core materials from nine locations are reported. The continuous deposits (Bunte Breccia) are found to be a chaotic mixture resulting from deposition at ambient temperatures in a highly turbulent environment, probably in the ballistic scenario proposed by Oberbeck et al. (1975), with an emplacement time of only about 5 min. Further impact parameters are estimated using the 'Z model' of Maxwell (1977): initial radius = 6.5 km, excavation depth = 1650 m, excavation volume = 136 cu km, and transient cavity volume = 230 cu km. The interpretation of lunar and planetary remote-sensing and in situ evidence from impact craters is reviewed in the light of the Ries findings. Numerous photographs, maps, diagrams, and tables illustrate the investigation.

Horz, F.↗

Multiple-pass trajectories for an aeroassisted orbital transfer vehicle

This paper investigates the use of multiple-pass trajectories for aeroassisted orbital transfer vehicles (AOTV) as a means of reducing the severe aeroheating environment and the extreme sensitivity to off-nominal trajectory and atmospheric conditions. One-, two-, and three-pass trajectories were calculated for AOTV's with ballistic coefficients ranging from 5 to 150 psf. Compared to the single-pass case, the maximum heat rate was reduced by 30 percent for two passes and 45 percent for three passes, while the maximum acceleration was reduced by 40 percent and 55 percent, respectively. The sensitivity of the trajectories to variations in atmospheric and orbital parameters was not significantly reduced.

Rehder, J. J.↗

Current status of the impact theory for the terminal Cretaceous extinction

An iridium abundance anomaly at the Cretaceous/Tertiary (C/T) boundary has been disclosed at 36 sites throughout the globe. The impact of a large extraterrestrial object is now widely accepted as the best explanation of this anomaly. Au/Ir and Pt/Ir ratios from two C/T boundary clays indicate a type I carbonaceous chondrite composition for the impacting object, for which a sea floor impact with subsequent subduction has been calculated to have a 20 percent probability. The extinction's 'killing mechanism' has not yet been established, but both temperature changes and darkness due to atmospheric dust are probable contributors. In view of the rapid dispersal of dust in ballistic trajectories, the rapid settling of heavy, coagulated dust particles, the effects of darkness on phytoplankton, and plant records, it is suggested that darkness would have lasted a few months, rather than the originally hypothesized few years.

Alvarez, W.↗

Effect of external viscous load on head movement

Quantitative measurements of horizontal head rotation were obtained from normal human subjects intending to make 'time optimal' trajectories between targets. By mounting large, lightweight vanes on the head, viscous damping B, up to 15 times normal could be added to the usual mechanical load of the head. With the added viscosity, the head trajectory was slowed and of larger duration (as expected) since fixed and maximal (for that amplitude) muscle forces had to accelerate the added viscous load. This decreased acceleration and velocity and longer duration movement still ensued in spite of adaptive compensation; this provided evidence that quasi-'time optimal' movements do indeed employ maximal muscle forces. The adaptation to this added load was rapid. Then the 'adapted state' subjects produced changed trajectories. The adaptation depended in part on the differing detailed instructions given to the subjects. This differential adaptation provided evidence for the existence of preprogrammed controller signals, sensitive to intended criterion, and neurologically ballistic or open loop rather than modified by feedback from proprioceptors or vision.

Nam, M.-H.↗

Analytical characterization of AOTV perigee aerothermodynamic regime

In preliminary design studies of AOTV (Aeroassisted Orbital Transfer Vehicle) configurations, it is desirable to have a simple analytical method for characterizing the aerothermodynamic regime at skip trajectory perigee as a function of vehicle L/D and m/CDA (ballistic coefficient). The present study derives an approximate perigee solution from the generalized equations of motion. For a prescribed entry velocity vector, the solution determines a Zeta function (proportional to density divided by m/CDA) at perigee as a parametric function of the exit velocity vector and (constant) L/D. The perigee Zeta function then determines perigee density (or altitude) as a parametric function of m/CDA. The solution allows the following classic aerothermodynamic parameters to be determined at perigee as parametric functions of m/CDA, L/D, and the exit velocity vector: Reynolds Number (viscous effects), Mach Number (compressibility effects), Knudsen Number (rarefaction effects), sphere and disk bow shock standoff distance, Damkohler Number (relaxation effects), viscous correlation parameter (viscid-inviscid interactions), and Stanton Number (convective heat transfer). Results of the analysis are given for low L/D and mid L/D AOTV configurations on return from geosynchronous and L5 orbits. It is concluded the method successfully provides preliminary estimates of the aerothermodynamic parameters through the use of simple algebraic equations and plots.

Desautel, D.↗

The aerodynamics of some guided projectiles

Some characteristic projectile shapes are considered with various added components intended to provide lift, stability, and control. The intent of the additions is to provide some means for altering the normal ballistic flight path of a projectile for various purposes such as: achieving greater accuracy at the impact point, selecting alternate impact points, extending range, improved evasion, and so on. The configurations presented illustrate the effects of a flare, wings, and tails for providing stability and lift, and the effects of aft-tails, a close-coupled flap, and all-moving forward wings for control. The relative merits of the various configurations, all of which provided for flight path alterations, are discussed.

Spearman, M. L.↗

Spiral structure and star formation. II - Stellar lifetimes and cloud kinematics

The reliability studies using continuum gas dynamical calculations becomes questionable in connection with the apparent clumpiness of the Galaxy's interstellar medium (ISM). Roberts and Hausman (1984) have, therefore, presented a detailed model of a disk galaxy in which the ISM consists entirely of 'cloud particles', which orbit ballistically in the galaxy's gravitational field, collide inelastically with one another, and give birth to and subsequently interact with young star associations. The effects of changing the clouds's collisional mean free path have been examined, and the variations in the young star system's spiral morphology have been explored. The present investigation is concerned with a further study of this clumpy, cloudy ISM model, taking into account longer mean free path models likely to be appropriate for systems of molecular clouds. Attention is also given to the kinematics of clouds as they orbit under the influence of galactic gravity, collisions, and supernova remnants.

Hausman, M. A.↗

Lunar origin from impact on the Earth

All theories of lunar origin involve events or processes which seemingly have low efficiencies or low probabilities or both. An impact-triggered fission lunar origin is presented. If the impact ejecta (a mixture of target and projectile) leave the impact site ballistically and are subsequently acted upon only by the gravity field of a spherical Earth, then the ejecta either reimpacts the Earth or escapes on a hyperbolic trajectory. Hence the need for a second burn. Three possible resolutions are considered: pressure gradient acceleration, non-central gravity, and viscous spreading.

Stevenson, D. J.↗