Search NASA⌕ Search

SEARCH · Search NASA

Results for “Capture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Highly Permeable Rubbery Thin Film Composite Membranes for CO2 Capture from Steel Mills

This presentation will report the rational design and fabrication of NETL’s highly permeable non-aging thin film composite (TFC) membranes for CO2 capture from various industrial point sources. This talk will also cover the design, computational fluid dynamic simulation, 3D printing, and permeation testing of plate-and-frame membrane modules for an upcoming field demonstration at U. S. Steel’s Edgar Thomson Plant in Braddock, PA. The field test will demonstrate membrane-based CO2 capture from a blast furnace for decarbonization of steel manufacturing for the first time in the U.S. A mobile gas permeation test unit is currently under design and construction for the field test, which is scheduled to take place in 2025.

Zhu, Lingxiang↗

CFD and systems engineering to minimize membrane-based carbon capture costs

In this study, we propose a superstructure for membrane-based carbon capture, addressing these challenges through the formulation of an optimization problem. The case study considers a flue gas with a flowrate of 1000 mol/s and a 30 % CO2 (molar basis), which is representative of steel plants. Reduced models, derived from rigorous CFD simulations of membrane modules, are utilized to enhance the efficiency of the optimization process. The reduced model includes specific input variables such as inlet flow rate, retentate and permeate pressures, and inlet CO2 concentration; while the CO2 recovery and purity in the permeate side are considered as output variables. In this way, we exploit the information from the CFD simulations in the superstructure, aiding in the selection of the optimal configuration for the multi-stage membrane process. The results underscore the efficiency of a multi-stage membrane design, showing capture costs around 45 $/t-CO2.

Pedrozo, Hector A.↗

Carbon Capture Technologies: Status and Challenges

Presentation at the Society of Petroleum Engineers Workshop: Oil and Gas Technology for a Net-Zero World – Defining Our Grand Challenges for the Next Decade. Provides a high-level overview of point source carbon capture and direct air capture technologies, challenges and cost estimation.

Fout, Timothy↗

Membrane Development for CO2 Capture from Steel Manufacturing

The U.S. government is targeting a net-zero carbon-emission economy by 2050, offering an exciting opportunity for membrane-based CO2 capture from various industrial point sources. Given that industrial flue gas has low CO2 partial pressures and high volumetric flow rates, high-permeance membranes are needed to make membrane technology economically viable for large-scale deployment. Thin film composite (TFC) membranes are necessary for this implementation because they can provide high permeance by forming a thin selective layer on top of a porous support. This presentation will report the rational design and fabrication of NETL’s highly permeable non-aging TFCs achieved by: synthesizing a high-performance rubbery selective material; developing a high-porosity membrane support; optimizing coating methods to assemble the two materials into scalable membranes; and scaling up membrane supports and TFCs via a roll-to-roll process. The novel rubbery selective material shows mixed-gas CO2 permeability of 930 Barrer and CO2/N2 selectivity of 44, exceeding the 2008 Robeson upper bound. The resulting TFCs yield remarkably high CO2 permeance of 4,500 GPU and CO2/N2 selectivity of 34 at 23ºC. Moreover, the TFCs exhibit not only excellent performance stability (or non-aging behavior) for 1,000 hours in the lab, but also maintain their separation properties in a 700-hour field test at the U.S. DOE’s National Carbon Capture Center using real humid flue gas.

Tran, Thien↗

Measurements of Pion and Muon Nuclear Capture at Rest on Argon in the LArIAT Test Beam Experiment

LArIAT is a liquid argon time projection chamber (LArTPC) experiment in a test beam at Fermilab from 2015 to 2017 to understand and characterize interactions of particles in LAr which are commonly observed in neutrino-Ar final-states. Tracks for pions and muons in LArTPCs are difficult to differentiate since both particles exhibit very similar ionization profiles for muon and pion that stop in the TPC. We are exploring unique new particle discrimination capabilities by exploiting information from small, isolated ionization depositions, referred to as "blips", reconstructed near the endpoint of stopping tracks. These blips are formed by gammas emitted when an at-rest pion or muon captures on the argon nucleus. The relatively low beam energy provided by LArIAT makes it uniquely suited for performing this demonstration. In this poster, we present an overview of event candidate selection, blip reconstruction, and background subtraction corresponding to our signal of interest, nuclear captures of pions and muons at rest inside LArIAT's TPC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Machine-Learned Force Field Modeling of Metal Organic Frameworks for CO2 Direct Air Capture

To cope with legacy greenhouse gas emissions and to achieve net-zero emissions by 2050, the U.S. Department of Energy (DOE) is funding efforts to develop direct air capture (DAC), a method for removing CO2 directly from air. Metal organic frameworks (MOFs) have been studied as DAC sorbent materials because of their structural and chemical diversity. Thermodynamic calculations using classical force fields are often used to screen MOFs for their performance in separations such as CO2 capture. Machine-learned force fields (MLFFs) can use machine learning to form quantitative relationships between a material’s chemical structure and the forces and energies predicted by more accurate quantum mechanical calculations, such as dispersion-corrected density functional theory (DFT). These descriptions of forces and energies can be used to improve the accuracy of adsorption calculations. In this work, MLFF models were developed for MOFs to achieve DFT-level accuracy for the forces and energies associated with MOF flexibility and CO2 adsorption. These methods were parametrized based on thousands of DFT calculations of CO2 in flexible MOFs and used to predict MOF structural properties as well as CO2 adsorption properties.

Findley, John↗

Characterization of Solid Sorbent for Direct Air Capture of CO2 using a CFD-based Methodology

Computational Fluid Dynamics (CFD) was used to investigate the CO2 capture by a novel PIM sorbent developed in National Energy Technology Laboratory (NETL) for direct air capture (DAC) applications. The CO2 adsorption kinetics used in the CFD was developed using isotherm data and CO2 breakthrough data obtained from experiments. Effect on humidity on the CO2 adsorption was also investigated and compared with the CO2 adsorption in dry conditions.

Aziz, Hossain↗

Techno-Economic Optimization of Fixed Bed and Moving Bed Contactors for CO2 Capture from NGCC Plants Using a Functionalized Metal-Organic Framework

Amine-appended metal–organic frameworks (MOFs) have strong potential for post-combustion CO2 capture from NGCC plants. In this work, a specific tetramine-appended MOF, Mg2(dobpdc)(3-4-3) (dobpdc4− = 4,4′-dioxidobiphenyl-3,3′dicarboxylate; 3-4-3 = N,N′bis(3-aminopropyl)-1,4-diaminobutane), is evaluated due to its superior performance compared to other candidate diamine-appended and tetraamine-appended MOFs. Techno-economic optimization is performed to minimize the cost of capture by using the Framework for Optimization, Quantification of Uncertainty, and Surrogates (FOQUS), which is capable of optimizing systems by using derivative-free optimization solvers where process models are built using numerous modeling platforms. The technical and economic performances of both fixed bed and moving bed processes are compared with state-of-the-art amine-based solvent systems.

Hughes, Ryan↗

Integrated Technology for Cost-Effective CO2 Capture and Formic Acid Production: Modeling, Optimization, and Economic Analysis

A novel reactive technology is being investigated that electrochemically converts CO2 into valuable chemicals, particularly formic acid. This work focuses on identifying the optimal design and operation of an integrated membrane-based CO2 capture unit with the electrochemical conversion process. In this setup, the CO2 in the flue gas permeates through a CO2-selective membrane and enters an electrolyzer to produce formic acid, creating an integrated reaction module. To refine the chemical product, gas products from the electrolyzer are directed to a pressure swing adsorption unit, while the liquid product undergoes refinement to achieve commercial-grade formic acid using reactive distillation. A membrane CO2 capture model and an electrochemical conversion model have been developed using the IDAES Integrated Platform (Institute for the Design of Advanced Energy System), facilitating rigorous flowsheet modeling and process design and optimization.

Wang, Maojian↗

Iodine Capture Studies of Silver Mordenite and Novel Alternative Metal Sorbents

Radioiodine is one of the radionuclides of concern when considering reprocessing of used nuclear fuel (UNF). It is expected to be released primarily in the dissolver off-gas (DOG) stream. Sorbents that target I 2 removal from a UNF processing off gas must perform efficiently under elevated temperatures in the presence of water vapor and nitrogen oxide gasses (NOx). Many studies have been conducted that examine the adsorption of iodine species in the presence of NOx gases through reduced silver-exchanged mordenite (Ag 0 Z), a zeolite mineral. This study characterizes the effects of iodine, water vapor, and nitrogen dioxide on the adsorption of I 2 by Ag 0 Z at lower temperatures suitable for comparison with novel Cu- and Bi- bearing sorbents which offer a non-RCRA alternative. When exposed to ‘harsh’ conditions such as I 2 , H 2 O, and NO 2 vapors carried by air, Cu 2 S-polyacrylonitrile (PAN) is more efficient than Ag 0 Z and all other novel sorbents, providing with 11% I capture efficiency. However, under ‘ideal’ conditions in which I 2 is carried by dry air), Ag 0 Z is more efficient than Cu 2 S-PAN and other novel sorbents, providing 74% I capture efficiency. To investigate this result and the overall performance of all sorbents tested, several characterization techniques were employed, including thermal gravimetric analysis, scanning electron microscopy – electron dispersion X-Ray spectroscopy, powder X-ray diffraction, and X-ray photoelectron spectroscopy. These techniques are discussed within this report. This document also includes a design and test plan update from Idaho National Laboratory as the next step in testing the high performing sorbents from thin-bed tests carried out by Oak Ridge National Laboratory.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Optimizing Carbon Capture, Transport, and Storage: Overcoming Challenges with Machine Learning and Cost-Benefit Analysis

Carbon Capture, Utilization, and Storage (CCUS) is a critical strategy for reducing CO₂ emissions and mitigating climate change. However, its widespread deployment faces numerous challenges across the capture, transport, and storage phases. These challenges include the technical complexity of predicting subsurface behaviors during CO₂ injection, ensuring long-term storage integrity, optimizing transportation networks, and balancing the economic and environmental trade-offs. Addressing these issues requires an integrated approach combining advanced subsurface modeling with system-level analyses to assess costs, risks, and benefits. This presentation provides an overview of studies conducted by the National Energy Technology Laboratory (NETL) to tackle these challenges. NETL’s efforts encompass cutting-edge research in subsurface fluid behavior machine learning predictions, alongside the development of innovative tools for system optimization and economic evaluation. By bridging technical expertise and strategic analysis, NETL aims to advance the deployment of CCUS technologies to support global decarbonization efforts. Presented at the Carnegie Mellon University CEE IESS Student Seminar October 4, 2024.

Shih, Chung Yan↗

Polar Bear™ – Innovative Capture of Storage Tank Vapors

Polar Bear™ is a patented technology developed by the Energy & Environmental Research Center (EERC) to capture storage tank vapors and eliminate methane emissions from upstream oil- and gas-producing facilities. Sparked by early commercial investment, the EERC licensed the technology and extended the intellectual property to storage tanks. Polar Bear™ is uniquely engineered and adapted to individual lower-producing facilities where there is otherwise no economic alternative for capturing tank vapors. A high number of small producing oil and gas wells are distributed across the country. The aggregate contributes to a significant volume of emissions. Because of the lack of economy of scale, gas volumes from these facilities are typically not recovered and contribute to methane emissions. Polar Bear™ provides a fit-for-purpose compression solution that addresses cost by reducing complexity with respect to conventional vapor recovery units and eliminating oil changes. Unique to Polar Bear™ is the capability to separate oxygenated gas from storage tank vapors. Storage tanks are designed to “breathe,” allowing gas to enter and escape during internal level and temperature changes. This infiltration of air into the tank headspace imparts undesirable oxygen content with respect to pipeline gathering. Polar Bear™ separates the vapor stream, allowing oxygen-rich gas to be used as fuel on-site while recovering the liquids-rich portion of the gas where oxygen content is minimized. A prototype system was tested to verify process models, evaluate operational performance, and advance the technology readiness level from 5 to 6. Results provide a good match between experimental measurements and process models, indicating the models are useful for future scale-up and field design. Various mixtures of nitrogen and liquefied petroleum gas were tested to understand the mass balance of nitrogen and how it relates to the potential control of oxygen content. Findings indicate that less than 2000 ppm of oxygen is likely to remain in the liquid portion of the gas in field applications. The research and development prepare the technology for field implementation to eliminate routine and fugitive methane emissions from storage tanks.

02 PETROLEUM↗

Building Cybersecurity Educational Materials for Students: The Windfarm Capture-The-Flag Exercise

Securing and protecting critical infrastructure in an increasingly digital world is vital but it is all too often an afterthought. It is especially important that students become aware of internet safety and security at an early age. However, the availability of interactive and educational cybersecurity material targeted toward students is minimal in the United States. Here we show an example of interactive cyber security educational material that an educator can use in their classroom to encourage students to think about the interaction between real-world physical objects, cyber security, and information security. By putting together a “capture-the-flag” exercise, students can see in real time how hackers and cybercriminals exploit vulnerabilities and gain access information. The students try to “capture” the “flag” (i.e., information) in the wind farm by looking for oddities in the code or by taking advantage of weaknesses in everyday protocols. Students can also see how cybersecurity interacts with the power grid through the wind farm project scenario and how a hacker could cause serious problems to a critical infrastructure sector. Our goal for the project is getting students interested in cybersecurity and help them develop an awareness of how important having robust security systems is. We also hope that this project demonstrates the importance of introducing these concepts early and inspires others to create similar projects geared toward students.

97 MATHEMATICS AND COMPUTING↗

Wind-Driven Direct Air Capture System Using 3D Printed, Passive, Amine-Loaded Contactors (WEDAC)

This project advanced the development of a novel wind-driven direct air capture (WEDAC) system for removing carbon dioxide (CO 2 ) from the atmosphere. Our research focused on combining passive air contact with electrothermal desorption using specially designed carbon fiber modules, aiming to provide a scalable, low-cost, and energy-efficient alternative to conventional carbon capture systems.

36 MATERIALS SCIENCE↗

Iodine Capture Studies of Copper- and Bismuth-Based Sorbents

The release of radioiodine, one of several radionuclides of concern when recycling used nuclear fuel (UNF), is an important consideration in the fuel cycle. In this study, two sorbent materials, Cu 0 -polyacrylonitrile (PAN) and Bi 0 -PAN, were tested as solid sorbent candidates for iodine capture. Experiments using a thin bed of sorbent material were exposed to vaporized iodine for over 300 hours (~2 weeks) under varied conditions in a dynamic flow environment. The overall performance was monitored in real-time using thermogravimetric analysis, and the materials were subsequently characterized for surface and bulk analysis using scanning electron microscopy – energy-dispersive spectroscopy (SEM-EDS) and powder x-ray diffraction (pXRD), respectively. Iodine (in the form of I 2 ) is expected to be released primarily in the dissolver off-gas (DOG) stream; therefore, this study demonstrates the effects of elemental iodine (I 2 ), water vapor (H 2 O), and nitrogen dioxide (NO 2 ). When exposed to ‘ideal’ conditions (in which I 2 is carried by dry air), Cu 0 -PAN and Bi 0 -PAN behave differently, with TGA analysis indicating that Cu 0 sorption performance is higher than that of Bi 0 , as evidenced by a larger mass change. Under ‘harsh’ conditions—such as a gaseous feed containing I 2 , H 2 O, and NO 2 vapors carried by air,—iodine capture performance for both Cu 0 - and Bi 0 -PAN are affected. SEM-EDS and pXRD analysis of these materials is discussed herein.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Demonstrate new plasticity models for doped UO 2 that capture dislocation mechanisms

In light water reactors, fuel vendors are investigating the use of dopants to modify the properties of UO 2 pellets, with the goal of improving pellet-cladding mechanical interactions during operation. Dopants are expected to ‘soften’ the pellets; that is, the doped pellets have higher plastic deformation than conventional UO 2 . This leads to a reduction in the severity of mechanical pellet-cladding interactions, helping to reduce the hoop strain on the cladding. By minimizing the strain exerted by the pellet on the cladding, it is anticipated that cladding performance under accident conditions can be enhanced (i.e., lowering the risk of burst during a LOCA). Dopants such as chromium (Cr) promote grain growth during pellet fabrication, leading to larger grains; therefore, understanding the link between chemistry, microstructure and mechanical deformation (enhanced creep rates) behavior of UO 2 is critical to helping operators further substantiate the benefits of doping UO 2 . Historically, the nuclear energy industry has relied on empirical models to make assessments of performance. Compared to empirical models, mechanistic physics-based models provide benefits, such as, fewer data points for validation and better extrapolation where experimental data is scarce or non-existent. In this report, Bayesian inference techniques have been applied to a previously developed lower length-scale-informed diffusional creep model. The objective is to i) infer lower-length-scale parameter distributions from available experiment and then ii) determine the uncertainties in the measurable quantity (in this case creep rates) after propagating the inferred lower length scale parameter uncertainties. The approach requires many evaluations of the model, which becomes computationally insurmountable; therefore, a neural-network model is trained to data obtained by sampling the full model over the most important parameters. This neural-network is then used in the Bayesian inference approach to determine probability distributions in the parameter values that represent the uncertainty in the model given what is known from the experiments (posterior). A significant reduction compared to conservative initial (prior) uncertainties is achieved through inference against the experimental data, demonstrating the efficacy of this approach. Furthermore, by accounting for uncertainties in the experimental conditions and sample non-stoichiometry, it is possible to resolve apparent discrepancies in experimental measurements within a self-consistent grain boundary (Coble) creep model that is sensitive to chemistry. This work has been written up and submitted to Nuclear Technology for a special issue on accelerated fuel qualification (AFQ). This uncertainty quantification (UQ) work not only improves the diffusional model, while accounting for uncertainty, but also establishes a framework which can readily be applied to the mechanistic models of dislocation deformation developed in this study. The most likely values from the Bayesian analysis are incorporated into our UO 2 diffusional creep model and a lower length scale-informed irradiation UO 2 creep mechanistic model to generate a dataset. This dataset has been provided to our INL collaborators for training an artificial neural network surrogate model, which will be implemented in the BISON fuel performance code to assess how the results differ from those currently obtained using a fully empirical model and that of using the nominal (uncalibrated) atomic scale parameters in our mechanistic model. Plastic deformation (creep and glide) in UO 2 is a complex phenomenon, governed by multiple underlying processes such as local defect concentrations, applied stresses, and microstructural characteristics. Consequently, there is a need for a meso-scale model with polycrystalline resolution capable of extrapolating to large grain sizes applicable to doped UO 2 , where data is limited and the model can help bridge the knowledge gap. By integrating atomistic data into the polycrystal LApx code, it becomes possible to predict dislocation climb and glide plasticity that simple analytical models cannot accurately represent. The application of atomic-scale data within LApx demonstrated the importance of climb and glide mechanisms in reproducing high-stress UO 2 behavior. Behaviors such as this are crucial to capture and implement in BISON, as parts of the fuel pellet can reach temperatures where glide can occur before pellet cracking. This model which captures dislocation based mechanisms for UO 2 is then used to stand up the doped model accounting for larger grain sizes. It was found that larger grain sizes can lead to enhanced deformation rates in the glide regime, and therefore can help with the pellet cladding mechanical interaction. Therefore if the fuel pellet reaches conditions (stress/temperature) where glide is active, the enhanced creep rates for larger grains in the glide regime (doped UO 2 ) can help with pellet cladding mechanical interactions. Plastic deformation in UO 2 involves multiple mechanisms, including diffusional creep, dislocation climb, and glide. This milestone contains two parts: (1) UQ of a pre-existing lower length scale informed mechanistic diffusional creep model, and (2) development of a new LApx based model for dislocation-mediated creep mechanisms in UO 2 , with application to large-grain doped UO 2 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗