Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

On a Pioneering Polymer Electrolyte Fuel Cell Model

"Polymer Electrolyte Fuel Cell Model" is a seminal work that continues to form the basis for modern modeling efforts, especially models concerning the membrane and its behavior at the continuum level. The paper is complete with experimental data, modeling equations, model validation, and optimization scenarios. While the treatment of the underlying phenomena is limited to isothermal, single-phase conditions, and one-dimensional flow, it represents the key interactions within the membrane at the center of the PEFC. It focuses on analyzing the water balance within the cell and clearly demonstrates the complex interactions of water diffusion and electro-osmotic flux. Cell-level and system-level water balance are key to the development of efficient PEFCs going forward, particularly as researchers address the need to simplify humidification and recycle configurations while increasing the operating temperature of the stack to minimize radiator requirements.

30 DIRECT ENERGY CONVERSION↗

1D Modeling for the Development of a Digital Twin for Hydropower Systems with Applications for a Testing Rig

Modeling and simulation constitute two important parts in constructing a sensible digital twin to mimic the dynamics of hydropower systems. Because of the physical nature of a hydropower system, the basic modeling should cover the water flow systems from the reservoir to the penstock (inlet water pipes), penstock to hydro turbine, and hydro turbine to generator and from the linkage of the hydropower systems to the grid. This report describes initial attempts to model these dynamic components, including the formulation of the linearized state space model for hydro turbine systems using the well-known six-coefficients linearization method and the formulation of the voltage and power dynamical models of a synchronous generator. To validate the accuracy of the proposed model, data collected from Norwegian University of Science and Technology were used to obtain relevant parameters for the model, and the desired simulation results were obtained. Additionally, neural network modeling and learning were also developed and applied to model the generation torque and water flow rate subsystems to demonstrate a potential learning scheme, which can be used in the development of a digital twin.

13 HYDRO ENERGY↗

Optimization and stabilization of Fermilab Booster using hybrid Bayesian/RL framework

PIPII project will raise Fermilab Booster intensity and ramp rate. Beam losses will limit average power and are hard to simulate. Presently, Booster uses operator-guided empirical tuning. This task is challenging due to high dimensionality, multiple objectives, critical safety constraints, and drifts. We developed a synergistic suite of Bayesian optimization (BO) and reinforcement learning (RL) tools to optimize and stabilize beam losses. First, active learning was used to build a rough model. Data was collected parasitically using two novel safety constraint types – nonlinear input space restrictions (based on optics model), and uncertainty constraints (to stop bad steps/beam aborts). We then applied online multi-objective BO with scalarized objectives and fitting to improve/rebalance losses, increasing safety margins by 25%. Using BO model as a safety veto, we tried several on/off-policy RL agents for long term stabilization; SAC had best performance. We found that adding contextual (state) information further improved performance, eventually integrating key knobs like linac phase and temperature into the parameter space. Long term testing is ongoing to enable operational use.

Kuklev, Nikita [Fermilab]↗

Aerodynamic loads measurements on externally blown flap STOL models

Small-scale-model data have shown large static loads on the flap system behind the engines. The large-scale-model tests confirmed the magnitude of these loads and indicated that the relative loading of each flap element depends on the engine-wing-flap geometry. Flap response measurements indicated that the unsteady pressure loading excited the natural vibration modes of the flap system on this model. Since this was a boilerplate model, the only conclusion that can be drawn is that the possibility of large vibration loads must be considered for a flight-weight structure. The similarity of the unsteady pressure and flap response spectra for the wind-off and wind-on cases indicated that it may be possible to realistically test flight-weight flap structures on a static test stand rather than endure the extra costs and scheduling problems associated with large-scale wind-tunnel tests. There is a potential flap-temperature problem which if not resolved might preclude the use of materials such as aluminum and the composites in the flap structure.

Greene, G. C.↗

A distributed data base management facility for the CAD/CAM environment

Current/PAD research in the area of distributed data base management considers facilities for supporting CAD/CAM data management in a heterogeneous network of computers encompassing multiple data base managers supporting a variety of data models. These facilities include coordinated execution of multiple DBMSs to provide for administration of and access to data distributed across them.

Balza, R. M.↗

Data Tips: Learn How to Discover, Access and Analyze NASA GES DISC Data

At the NASA Goddard Earth Sciences Data and Information Services (GES DISC), we strive to simplify data discovery and data access to our wide range of global climate data, concentrated primarily in the areas of atmospheric composition, atmospheric dynamics, global precipitation, solar irradiance, and several modeling data sets related to land surface hydrology. To help meet user needs, we will demonstrate how you can use the GES DISC knowledge-base resources (HowTo's) and we also encourage community contributions.

data tips↗

Concept of Fractal Dimension use of Multifractal Cloud Liquid Models Based on Real Data as Input to Monte Carlo Radiation Models

The purpose of this paper is discuss the concept of fractal dimension; multifractal statistics as an extension of this; the use of simple multifractal statistics (power spectrum, structure function) to characterize cloud liquid water data; and to understand the use of multifractal cloud liquid water models based on real data as input to Monte Carlo radiation models of shortwave radiation transfer in 3D clouds, and the consequences of this in two areas: the design of aircraft field programs to measure cloud absorptance; and the explanation of the famous "Landsat scale break" in measured radiance.

Wiscombe, W.↗

Comparisons of measured and theoretical thermospheric daily composition variations

A comparison of the diurnal component of the daily variation in the neutral composition data from the San Marco 3 Nace (Neutral Atmospheric Composition Experiment) mass spectrometer at 220, 250, and 280 km, the OGO-6 model data at 450 km, rocket measurements of nitrogen between 140 and 300 km, and the two-constituent theoretical model of Mayr and Volland (1973) gives good agreement for molecular nitrogen and atomic oxygen. The Nace and rocket measurements overlap in altitude, and there is good agreement in the amplitude and phase of the diurnal and semidiurnal components for molecular nitrogen. The helium diurnal amplitude and phase of the theoretical model are in fair agreement with the Nace results, while the amplitude from the OGO-6 model at 450 km is much larger than the model predicts, a result suggesting that the OGO-6 model diurnal amplitude may be overestimated as the result of an incomplete separation of local-time and seasonal effects.

Kasprzak, W. T.↗

PyDDA: A Pythonic Direct Data Assimilation Framework for Wind Retrievals

This software assimilates data from an arbitrary number of weather radars together with other spatial wind fields (eg numerical weather forecasting model data) in order to retrieve high resolution three dimensional wind fields. PyDDA uses NumPy and SciPy’s optimization techniques combined with the Python Atmospheric Radiation Measurement (ARM) Radar Toolkit (Py-ART) in order to create wind fields using the 3D variational technique (3DVAR). PyDDA is hosted and distributed on GitHub at https://github.com/openradar/PyDDA. PyDDA has the potential to be used by the atmospheric science community to develop high resolution wind retrievals from radar networks. These retrievals can be used for the evaluation of numerical weather forecasting models and plume modelling. This paper shows how wind fields from 2 NEXt generation RADar (NEXRAD) WSR-88D radars and the High Resolution Rapid Refresh can be assimilated together using PyDDA to create a high resolution wind field inside Hurricane Florence.

54 ENVIRONMENTAL SCIENCES↗

Prediction of Noise-Power-Distance Data for Urban Air Mobility Vehicles

In contrast to most commercial air traffic today, vehicles serving the urban air mobility (UAM) market are anticipated to operate within communities and be close to the public at large. The approved model for assessing environmental impact of air traffic actions in the United States, the Federal Aviation Administration (FAA) Aviation Environmental Design Tool (AEDT), does not directly support analysis of such operations due to a combined lack of UAM aircraft flight performance model data and aircraft noise data. This paper addresses the latter by offering two prediction-based approaches for generation of noise-power-distance (NPD) data for use within AEDT. One utilizes the AEDT fixed-wing aircraft modeling approach and the other utilizes the AEDT rotary-wing aircraft modeling approach.

noise-power-distance↗

The Plant Ontology as a Tool for Comparative Plant Anatomy and Genomic Analyses

The Plant Ontology (PO; http://www.plantontology.org/) is a publicly available, collaborative effort to develop and maintain a controlled, structured vocabulary (‘ontology’) of terms to describe plant anatomy, morphology and the stages of plant development. The goals of the PO are to link (annotate) gene expression and phenotype data to plant structures and stages of plant development, using the data model adopted by the Gene Ontology. From its original design covering only rice, maize and Arabidopsis, the scope of the PO has been expanded to include all green plants. The PO was the first multispecies anatomy ontology developed for the annotation of genes and phenotypes. Also, to our knowledge, it was one of the first biological ontologies that provides translations (via synonyms) in non-English languages such as Japanese and Spanish. As of Release #18 (July 2012), there are about 2.2 million annotations linking PO terms to >110,000 unique data objects representing genes or gene models, proteins, RNAs, germplasm and quantitative trait loci (QTLs) from 22 plant species. In this paper, we focus on the plant anatomical entity branch of the PO, describing the organizing principles, resources available to users and examples of how the PO is integrated into other plant genomics databases and web portals. We also provide two examples of comparative analyses, demonstrating how the ontology structure and PO-annotated data can be used to discover the patterns of expression of the LEAFY (LFY) and terpene synthase (TPS) gene homologs.

59 BASIC BIOLOGICAL SCIENCES↗

County Level Annual Population Projections for SSP3 and SSP5

This dataset consist of annual (2020-2100) county-level population projections for the United States (U.S.) for Shared Socioeconomic Pathways (SSPs) 3 and 5. The original decadal state-level data is used as an input to the gridded population data model to downscale the state-level projections for each SSP to a 1 km grid. The 1 km data is then aggregated to the county-level using the 2020 TIGER/Line county shapefiles from the U.S. Census Bureau. The two data files are shared as .csv files with the following structure: Rows = Data for individual counties which are identified using their Federal Information Processing Standard (FIPS) code. The FIPS code is stored in the first column. Columns = Each year from 2020-2100 is an individual column. For easier reference, the state name associated with each row is stored in the last column. Values in each cell are the downscaled estimated population for that county-year combination. Values are fractional due to the weighting scheme used in the downscaling. The paper and model source code cited in the "Related Works" section describes the initial source of the population projections.

FIPS↗

A Pacific Ocean general circulation model for satellite data assimilation

A tropical Pacific Ocean General Circulation Model (OGCM) to be used in satellite data assimilation studies is described. The transfer of the OGCM from a CYBER-205 at NOAA's Geophysical Fluid Dynamics Laboratory to a CRAY-2 at NASA's Ames Research Center is documented. Two 3-year model integrations from identical initial conditions but performed on those two computers are compared. The model simulations are very similar to each other, as expected, but the simulations performed with the higher-precision CRAY-2 is smoother than that with the lower-precision CYBER-205. The CYBER-205 and CRAY-2 use 32 and 64-bit mantissa arithmetic, respectively. The major features of the oceanic circulation in the tropical Pacific, namely the North Equatorial Current, the North Equatorial Countercurrent, the South Equatorial Current, and the Equatorial Undercurrent, are realistically produced and their seasonal cycles are described. The OGCM provides a powerful tool for study of tropical oceans and for the assimilation of satellite altimetry data.

Chao, Y.↗

What does fault tolerant Deep Learning need from MPI?

Deep Learning (DL) algorithms have become the {\em de facto} Machine Learning (ML) algorithm for large scale data analysis. DL algorithms are computationally expensive -- even distributed DL implementations which use MPI require days of training (model learning) time on commonly studied datasets. Long running DL applications become susceptible to faults -- requiring development of a fault tolerant system infrastructure, in addition to fault tolerant DL algorithms. This raises an important question: {\em What is needed from MPI for designing fault tolerant DL implementations?} In this paper, we address this problem for permanent faults. We motivate the need for a fault tolerant MPI specification by an in-depth consideration of recent innovations in DL algorithms and their properties, which drive the need for specific fault tolerance features. We present an in-depth discussion on the suitability of different parallelism types (model, data and hybrid); a need (or lack thereof) for check-pointing of any critical data structures; and most importantly, consideration for several fault tolerance proposals (user-level fault mitigation (ULFM), Reinit) in MPI and their applicability to fault tolerant DL implementations. We leverage a distributed memory implementation of Caffe, currently available under the Machine Learning Toolkit for Extreme Scale (MaTEx). We implement our approaches by extending MaTEx-Caffe for using ULFM-based implementation. Our evaluation using the ImageNet dataset and AlexNet neural network topology demonstrates the effectiveness of the proposed fault tolerant DL implementation using OpenMPI based ULFM.

Amatya, Vinay C.↗

Projected Changes in Daily Variability and Seasonal Cycle of Near-Surface Air Temperature over the Globe during the Twenty-First Century

Abstract Increases in atmospheric greenhouse gases will not only raise Earth’s temperature but may also change its variability and seasonal cycle. Here CMIP5 model data are analyzed to quantify these changes in surface air temperature (Tas) and investigate the underlying processes. The models capture well the mean Tas seasonal cycle and variability and their changes in reanalysis, which shows decreasing Tas seasonal amplitudes and variability over the Arctic and Southern Ocean from 1979 to 2017. Daily Tas variability and seasonal amplitude are projected to decrease in the twenty-first century at high latitudes (except for boreal summer when Tas variability increases) but increase at low latitudes. The day of the maximum or minimum Tas shows large delays over high-latitude oceans, while it changes little at low latitudes. These Tas changes at high latitudes are linked to the polar amplification of warming and sea ice loss, which cause larger warming in winter than summer due to extra heating from the ocean during the cold season. Reduced sea ice cover also decreases its ability to cause Tas variations, contributing to the decreased Tas variability at high latitudes. Over low–midlatitude oceans, larger increases in surface evaporation in winter than summer (due to strong winter winds, strengthened winter winds in the Southern Hemisphere, and increased winter surface humidity gradients over the Northern Hemisphere low latitudes), coupled with strong ocean mixing in winter, lead to smaller surface warming in winter than summer and thus increased seasonal amplitudes there. These changes result in narrower (wider) Tas distributions over the high (low) latitudes, which may have important implications for other related fields.

54 ENVIRONMENTAL SCIENCES↗

WebTRAGIS: Transportation Routing Analysis Geographic System User’s Manual

The Web-Based Transportation Routing Analysis Geographic Information System (WebTRAGIS) model is a geographic information system tool for modeling transportation routing. WebTRAGIS is deployed as a browser-based application interface, and the routing engine is located on a server at Oak Ridge National Laboratory (ORNL). WebTRAGIS offers users numerous options for route calculation using uniquely value-added network databases for highway, rail, and waterway infrastructures in the continental United States. The model also provides reporting information on population densities for all transportation segments using the LandScan USA population distribution data model.

42 ENGINEERING↗

Formal Provenance Representation of the Data and Information Supporting the National Climate Assessment

The Global Change Information System (GCIS) provides a framework for the formal representation of structured metadata about data and information about global change. The pilot deployment of the system supports the National Climate Assessment (NCA), a major report of the U.S. Global Change Research Program (USGCRP). A consumer of that report can use the system to browse and explore that supporting information. Additionally, capturing that information into a structured data model and presenting it in standard formats through well defined open inter- faces, including query interfaces suitable for data mining and linking with other databases, the information becomes valuable for other analytic uses as well.

Provenance↗