Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

The grain refinement mechanisms of various phases in shot-peened Nickel-Aluminum bronze (NAB) alloy

Highlights: • There exist two grain refinement mechanisms at the same time in the α phase. • The refinement of β' phase is attributed to the formation of dense and ordered nano twins. • The brittle strip-shape κ{sub iii} phases are fragmented after large deformation. • The κ{sub iv} and κ{sub ii} phases exhibit the twinning and dislocation deformation modes, separately. • The microhardness increases significantly owing to work hardening effect and grain refinement. - Abstract: In this study, coarse-grained Nickel-Aluminum bronze (NAB) alloy is subjected to shot-peening (SP) treatment, and the grain refinement mechanisms of various phases in shot-peened NAB alloy are investigated separately. The results show that severe deformation layers are produced on the surface. Meanwhile, refined grains with the average size below 100 nm are induced through SP treatment indicated by the results of X-ray diffraction (XRD) patterns. Various phases in NAB alloy including α, β' and three intermetallic phases (κ{sub ii}, κ{sub iii} and κ{sub iv}) display different grain refinement mechanisms. The grain refinement in the α phase involves dislocation segmentation in the precipitation-free zone and the twinning intersection in the precipitation zone. The formation of nanotwins by emitting partial dislocations at the grain boundary is found to be responsible for the grain refinement in the β' phase. As for the κ phases, the strip-shaped κ{sub iii} phases are fragmented after severe deformation, and the κ{sub iv} and κ{sub ii} phases exhibit the twinning and dislocation deformation modes, respectively. Also, the microhardness is significantly enhanced after SP treatment, which is mainly attributed to the work hardening effect and grain refinement.

36 MATERIALS SCIENCE↗

Molten salt synthesis, characterization, and luminescence properties of GdNbO{sub 4}/LuTaO{sub 4}:Eu{sup 3+} phosphors

Graphical abstract: Well crystallized GdNbO4:Eu3{sup +} and LuTaO{sub 4}:Eu3{sup +} in the presence of fluxes were formed under reduced temperature in contrast to conventional method and their photophysical properties were studied. - Highlights: • Molten salt method was used to assemble two phosphors. • Both GdNbO{sub 4}:Eu{sup 3+} and LuTaO{sub 4}:Eu{sup 3+} could be red emissive. • The two powders were well dispersed as nano-particles. - Abstract: GdNbO{sub 4}:Eu{sup 3+} and LuTaO{sub 4}:Eu{sup 3+} have been successfully prepared with different fluxes (NaCl, KCl, NaCl and KCl) by the molten salt method. X-ray diffraction (XRD) patterns illustrated that well crystallized GdNbO{sub 4}:Eu{sup 3+} and LuTaO{sub 4}:Eu{sup 3+} in the presence of fluxes were formed under reduced temperature (900 °C) in contrast to conventional method (GdNbO{sub 4}:Eu{sup 3+}: around 1200 °C; LuTaO{sub 4}:Eu{sup 3+}: around 1500 °C). Scanning electron microscope (SEM) images revealed that well dispersed particles were achieved (granular or rod-like structures). Meanwhile, the photo-luminescent studies demonstrated that both niobate and tantalate are efficient hosts to sensitize europium red emissions. The results indicated that GdNbO{sub 4}:Eu{sup 3+} using NaCl as the flux gave much enhanced red emission whereas LuTaO{sub 4}:Eu{sup 3+} synthesized with the assistance of mixed salts (NaCl–KCl) achieved the best luminescence.

36 MATERIALS SCIENCE↗

The influence of oxygen doping on critical parameters of mercury based superconductors

In this work, the effect of oxygen doping on the critical parameters of the mercury based superconducting sample such as critical transition temperature, T{sub c}, critical magnetic field, H{sub c}, critical current density, J{sub c}, has been investigated by the magnetic susceptibility versus temperature (χ-T) and magnetization versus applied magnetic field (M-H) measurements and, X-Ray Diffraction (XRD) patterns. It has been observed that regardless of the oxygen doping concentration, the mercury cuprate system possesses two intrinsic superconducting phases together, HgBa{sub 2}Ca{sub 2}Cu{sub 3}O{sub 8+x} and HgBa{sub 2}CaCu{sub 2}O{sub 6+x}. However, the highest T{sub c} has been determined for the optimum oxygen doped sample. Moreover, it has been revealed that superconducting properties, crystal lattice parameters, coherent lengths, ξ{sub ab}, ξ{sub c} and the anisotropy factor γ etc. are very sensitive to oxygen doping procedures. Hence, the results presented this work enables one to obtain the mercury based superconductor with the most desirable criticals and other parameters for theoretical and technological applications by arranging the oxygen doping concentration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microscopic evaluation of creep-fatigue interaction in a nickel-based superalloy

In order to verify the applicability of Nickel-based alloy Alloy 263 for the thick component, a series of creep, fatigue and creep-fatigue experiments were carried out. To investigate the detailed damage process under the creep-fatigue condition, simple aged, crept, fatigued, and creep-fatigued specimens were subjected to electron back scattering diffraction (EBSD) pattern observation in the SEM. While the simple aged and fatigued specimens showed no remarkable local change in orientation (less than 1deg), the crept specimen exhibited inhomogeneous change of crystallographic orientation, at most 5 degrees, within the grains. This shows that the creep strain is inhomogeneously distributed in the grains due to the effect of relative constraint among the grains. The creep-fatigued specimen exhibited similar local inhomogeniety in strain distribution compared to the crept sample near the center of the grains. However, the creep-fatigued specimen showed remarkable local change in orientation at the vicinity of grain boundaries up to 15 degrees, indicating the occurrence of high strain concentration nearby the grain boundaries. A detailed observation of creep-fatigue damage evolution process in SEM revealed that the inhomogeneous grain deformation precedes the remarkable inhomogeneous deformation nearby the grain boundaries, and followed by the grain boundary cracking.

36 MATERIALS SCIENCE↗

Electrochemical Investigations of Magnetic Co{sub 3}O{sub 4} Nanoparticles as an Active Electrode for Supercapacitor Applications

This attempt reports on cobalt oxide (Co{sub 3}O{sub 4}) nanoparticles (NPs) prepared through the traditional chemical reflux method to examine the behavior of supercapacitor performance. The synthesized NPs were characterized using several analytical tools such as ultraviolet-visible spectroscopy (UV), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) pattern, and scanning electron microscope (SEM) with energy dispersive X-ray spectroscopy (EDX). Moreover, the electrochemical performance was analyzed using galvanostatic charge and discharge studies (GCD), cyclic voltammetry (CV) studies as well as electrochemical impedance spectroscopy (EIS). The cubical phase of Co{sub 3}O{sub 4} was identified from the XRD pattern and also the average crystalline size was measured by Scherrer’s equation. FTIR confirmed the functional group of Co{sub 3}O{sub 4} NPs. SEM images revealed the hexagonal-shaped nanoflakes-like morphology of the sample. From the elemental analysis, the formation of pure Co{sub 3}O{sub 4} NPs by means of high purity and composition ratio of cobalt with oxygen was found. Vibrating sample magnetometer (VSM) plot scrutinized the magnetic performance of Co{sub 3}O{sub 4} NPs{sub .} The Co{sub 3}O{sub 4} NPs modified electrode has delivered maximum specific capacitance as 1413 Fg{sup −1} at a current density of 1 Ag{sup −1} which maintains tremendous cycling stability within the retention ratio of 98.4% after 1000 cycles. .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of Ni doping on structural and optical properties of Zn{sub 1−x}Ni{sub x}O nanopowder synthesized via low cost sono-chemical method

Highlights: • Pure and Ni doped ZnO nanopowders were synthesized by low cost sonochemical method. • The optical properties of Zn{sub 1−x}Ni{sub x}O nanopowders can be tuned by varying Ni content. • The results reveal the solubility limit of Ni into ZnO matrix as below 8%. - Abstract: Zn{sub 1−x}Ni{sub x}O nanopowders with different Ni contents of x = 0.0, 0.04 and 0.08 were synthesized via cost effective sonochemical reaction method. X-ray diffraction (XRD) pattern reveals pure wurtzite phase of prepared nanostructures with no additional impurity peaks. The morphology and dimensions of nanoparticles were investigated using scanning electron microscope (SEM). A sharp and strong peak for first order optical mode for wurtzite zinc oxide (ZnO) structure was observed at ∼438 cm{sup −1} in Raman spectra. The calculated optical band gap (E{sub g}) from UV–vis transmission data was found to decrease with increase in Ni content. The observed red shift in E{sub g} with increasing Ni content in ZnO nanopowders were in agreement with band gap behaviours found in their photoluminescence (PL) spectra. The synthesised ZnO nanopowders with controlled band gap on Ni doping reveals their potential for use in various electronic and optical device applications. The results were discussed in detail.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microwave synthesis and photocatalytic activities of ZnO bipods with different aspect ratios

Highlights: • We synthesized linked ZnO nanorods by a facile microwave method. • The effect of reaction parameters on ZnO was investigated. • ZnO bipods with different aspect ratios were prepared. • The photocatalytic performance of ZnO bipods was evaluated. - Abstract: Linked ZnO nanorods have been successfully prepared via a facile microwave method without any post-synthesis treatment. The X-ray diffraction (XRD) patterns indicated the precursor had completely transformed into the pure ZnO crystal. The images of field emitting scanning electron microscope (FESEM) and transmission electron microscope (TEM) showed that linked ZnO nanorods consisted predominantly of ZnO bipods. The formation process of the ZnO bipods was clearly discussed. ZnO bipods with different aspect ratios have been obtained by tuning the concentrations of reagents and microwave power. Moreover, the photocatalytic performance of ZnO bipods with different aspect ratios for degradation of methylene blue was systematically evaluated. The results of photocatalytic experiments showed that the photocatalytic activity increased with the aspect ratios of ZnO bipods increased. The reason is that ZnO bipods with larger aspect ratio have higher surface area, which can absorb more MB molecules to react with ·OH radicals.

36 MATERIALS SCIENCE↗

Structural and optical properties of Ta{sub 2}O{sub 5}:Eu{sup 3+}: Mg{sup 2+} or Ca{sup 2+} phosphor prepared by molten salt method

Ta{sub 2}O{sub 5}:Eu{sup 3+}: Mg{sup 2+} or Ca{sup 2+} phosphor materials were prepared by molten salt method using KCl as flux. The X-ray diffraction (XRD) patterns illustrated that the well crystallized Ta{sub 2}O{sub 5}:Eu{sup 3+}: Mg{sup 2+} or Ca{sup 2+} were formed in the presence of flux under reduced temperature (800 °C) in contrast to conventional solid state method (1200-1500 °C). Scanning electron microscope (SEM) images indicate the achievement of well dispersed particles (hexagonal tablet and rod-like structures). Meanwhile, the photo-luminescent studies demonstrated that Ta{sub 2}O{sub 5} is an efficient host to sensitize europium red emissions. The addition of Mg{sup 2+} or Ca{sup 2+} as co-dopant enhanced the luminescent intensity of Ta{sub 2}O{sub 5}: Eu{sup 3+} compound.

36 MATERIALS SCIENCE↗

The role of ZrN capping layer deposited on ultra-thin high-k Zr-doped yttrium oxide for metal-gate metal–insulator–semiconductor applications

Metal-gate MIS structures with and without ZrN capping layer on high-k Y{sub 2}O{sub 3}:Zr/Y{sub 2}O{sub 3} stack were fabricated. The binding energies and depth profiles were investigated by x-ray photoelectron spectroscopy (XPS). The x-ray diffraction (XRD) patterns were compared. It is found that Ti out-diffusion into Zr-based high-k dielectric becomes lesser with the insertion of ZrN capping layer. The electrical properties of current-voltage (I-V) and capacitance-voltage (C-V) characteristics were measured in the postannealing temperature range of 550–850 °C. According to the defect reaction model, Zr cation vacancies are associated with the concentration of Ti ion by a transition from +3 to +2 states. The amount of Zr cation vacancies is quantified and equal to a half of Ti substitution amount at Zr site. The reduction in cation vacancies at high temperatures can well explain the decrease in ΔV{sub FB} for samples with ZrN layer. In contrast, an excess of Ti outdiffusion will produce the interstitial defects in high-k films without ZrN capping.

36 MATERIALS SCIENCE↗

A quaternary lead based perovskite structured materials with diffuse phase transition behavior

Graphical abstract: (a) Curie-Weiss plot for the inverse of the relative dielectric permittivity and (b) log (1/{epsilon} - 1/{epsilon}{sub m}) as function of log (T - T{sub m}) for ceramics at 1 kHz. Highlights: Black-Right-Pointing-Pointer Retaining phase pure structure with quaternary complex stoichiometric compositions. Black-Right-Pointing-Pointer P-E loops with good saturation polarization (P{sub s} {approx} 30.7 {mu}C/cm{sup 2}). Black-Right-Pointing-Pointer Diffused relaxor phase transition behavior with {gamma} estimated is {approx}1.65. -- Abstract: A lead based quaternary compound composed of 0.25(PbZr{sub 0.52}Ti{sub 0.48}O{sub 3}) + 0.25(PbFe{sub 0.5}Ta{sub 0.5}O{sub 3}) + 0.25 (PbF{sub 0.67}W{sub 0.33}O{sub 3}) + 0.25(PbFe{sub 0.5}Nb{sub 0.5}O{sub 3}) - (PZT-PFT-PFW-PFN) was synthesized by conventional solid-state reaction techniques. It showed moderate high dielectric constant, low dielectric loss, and two diffuse phase transitions, one below the room temperature {approx}261 K and other above {approx}410 K. X-ray diffraction (XRD) patterns revealed a tetragonal crystal structure at room temperature where as scanning electron micrograph (SEM) indicates inhomogeneous surface with an average grain size of 500 nm-3 {mu}m. Well saturated ferroelectric hysteresis loops with good saturation polarization (spontaneous polarization, P{sub s} {approx} 30.68 {mu}C/cm{sup 2}) were observed. Temperature-dependent ac conductivity displayed low conductivity with kink in spectra near the phase transition. In continuing search for developing new ferroelectric materials, in the present study we report stoichiometric compositions of complex perovskite ceramic materials: (PZT-PFT-PFW-PFN) with diffuse phase transition behavior. The crystal structure, dielectric properties, and ferroelectric properties were characterized by XRD, SEM, dielectric spectroscopy, and polarization. 1/{epsilon} versus (T) plots revealed diffuse relaxor phase transition (DPT) behavior. The compositional variation on the phase transition temperature, dielectric constant, and ferroelectric to paraelectric phase transitions are discussed.

36 MATERIALS SCIENCE↗

Magnetic and electric modulus properties of In substituted Mg–Mn–Cu ferrites

Highlights: • Ferrite of composition Mg{sub 1−y}Cu{sub y}Mn{sub 0.1}In{sub x}Fe{sub 1.9−x}O{sub 4} with (0.0 ≤ x ≤ 0.4; y = 0.0; 0.1) has been synthesized. • Electric, magnetic and Mössbauer studies have been investigated. • The real and imaginary parts of electric modulus follow the Arrhenius law. • Saturation magnetization increases up to x = 0.2 and thereafter it decreases. • Good agreement between the magnetic and Mössbauer effect studies. - Abstract: Ferrite of composition Mg{sub (1−y)}Cu{sub (y)}Mn{sub (0.1)}In{sub (x)}Fe{sub (1.9−x)}O{sub 4} with (0.0 ≤ x ≤ 0.4; y = 0.0 and y = 0.1) has been synthesized by solid state reaction technique. X-ray diffraction (XRD) patterns of the samples indicated the formation of single-phase cubic spinel structure up to 0.2 and mixed phase for samples x ≥ 0.3. Vibrating sample magnetometer (VSM) measurements indicated that the saturation magnetization increases up to x = 0.2 and thereafter it decreases. Electric modulus analysis was used as a tool to analyze the electrical behavior of the samples. The activation energies extracted from real M′ (ω) and imaginary M″ (ω) peaks were found to follow the Arrhenius law. The area ratio of Fe{sup 3+} at the tetrahedral A- and octahedral B-sites was deduced from the spectral analysis of Mössbauer measurements. The results give evidence that In{sup 3+} replaces Fe{sup 3+} at A-site in the range (0.0 < x ≤ 0.2). As the In{sup 3+} content increases; it replaces Fe at B-site.

36 MATERIALS SCIENCE↗

Ce-Doping and Reduction Annealing Effects on Magnetic Properties of Pr{sub 2-x}Ce{sub x}CuO{sub 4} Nanoparticles

Magnetic properties of reduced T’-Pr{sub 2-x}Ce{sub x}CuO{sub 4} (T’-PCCO) nanoparticles with x = 0, 0.10, and 0.15 have been investigated. The T’-PCCO samples were synthesized by the chemically dissolved method with HNO{sub 3} as dissolving agents and by the succeeding calcination at 1000 °C for 15 h in air. The reduced T’-PCCO samples were obtained by the reduction annealing at 700 °C for 10 h in Argon atmosphere and at 700 °C for 12 h in vacuum. Rietveld analyses of the X-ray diffraction (XRD) patterns for all the samples have revealed dependences of the c-axis length and the crystal size on the Ce doping and the reduction annealing. XRD analyses and transmission electron microscopy (TEM) images have confirmed T’-PCCO nanoparticles with the size of around 40–100 nm. Magnetic properties of all the T’-PCCO nanoparticles were studied by a superconducting quantum interference device (SQUID) showing a dominant paramagnetic feature with very weak ferromagnetism in the as-synthesized samples at room temperature. It has changed to a pure paramagnetic feature after the reduction annealing in argon atmosphere and an enhanced ferromagnetism through vacuum annealing. This is probably due to the change in the number of oxygen vacancies through the defect recovery and the removal of excess oxygen after both reduction annealing processes, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Sol–gel synthesis, structure and luminescence properties of Ba{sub 2}ZnMoO{sub 6}:Eu{sup 3+} phosphors

Graphical abstract: The phosphor powders of Ba{sub 2}ZnMoO{sub 6}:Eu{sup 3+} were prepared by sol–gel method. The dependence of luminescence intensity on the Eu{sup 3+} concentration was investigated. - Highlights: • We synthesize Ba{sub 2}ZnMoO{sub 6}:Eu{sup 3+} phosphors by the sol–gel method. • The effect of temperature on the crystallinity and morphology is investigated. • The phosphor presents an intense CT band in near UV range (370–410 nm). • The concentration quenching mechanism is the exchange interaction. - Abstract: Double-perovskite Ba{sub 2}Zn{sub 1−x}MoO{sub 6}:xEu{sup 3+} (x = 0, 0.02, 0.04, 0.06, 0.08, 0.1) orange–red emitting phosphors were synthesized by using the sol–gel method. The crystalline structure and photoluminescence properties of the phosphors were investigated. The X-ray diffraction (XRD) patterns indicate that the structure of matrix Ba{sub 2}ZnMoO{sub 6} is cubic double-perovskite with space group Fm-3m. The Ba{sub 2}ZnMoO{sub 6}:Eu{sup 3+} phosphors present an intense broad charge transfer (CT) band absorption in near UV range (370–410 nm), which attributes to the charge transfer state of MoO{sub 6}, and performs orange–red emission of Eu{sup 3+} ({sup 5}D{sub 0} → {sup 7}F{sub 1} transition) at around 596 nm. A low concentration quenching occurs in Ba{sub 2}ZnMoO{sub 6}:Eu{sup 3+} and the optimal doping concentration is about 6 mol%. The Ba{sub 2}ZnMoO{sub 6}:Eu{sup 3+} phosphors are considered to be a promising orange–red emitting phosphor for near ultraviolet GaN-based white light emitting diode.

36 MATERIALS SCIENCE↗

Investigations on structural, vibrational and dielectric properties of nanosized Cu doped Mg-Zn ferrites

Transition metal Cu{sup 2+} doped Mg-Zn ferrite [Mg{sub 0.5}Zn{sub 0.5-x}Cu{sub x}Fe{sub 2}O{sub 4} (0.0 ≤ x ≤ 0.5)] were prepared by sol gel auto combustion (SGAC) method to probe the structural, vibrational and electrical properties. X-ray diffraction (XRD) pattern reveals a single-phase cubic spinel structure without the presence of any secondary phase corresponding to other structure. The average particle size of the parent Mg{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} is found to be ~29.8 nm and is found to increase with Cu{sup 2+} doping. Progressive reduction in lattice parameter of Mg{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} has been observed due to difference in ionic radii of cations with improved Cu doping. Spinel cubic structure is further confirmed by Raman spectroscopy. Small shift in Raman modes towards higher wave number has been observed in doped Mg-Zn ferrites. The permittivity and dielectric loss decreases at lower doping and increases at higher order doping of Cu{sup 2+}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microwave-assisted low temperature synthesis of wurtzite ZnS quantum dots

In this work we report, for the first time, on microwave assisted synthesis of wurtzite ZnS quantum dots (QDs) in controlled reaction at temperature as low as 150 Degree-Sign C. The synthesis can be done in different microwave absorbing solvents with multisource or single source precursors. The QDs are less than 3 nm in size as characterized by transmission electron microscopy (TEM) using selected area electron diffraction (SAED) patterns to confirm the wurtzite phase of ZnS QDs. The optical properties were investigated by UV-Vis absorption which shows blue shift in absorption compared to bulk wurtzite ZnS due to quantum confinement effects. The photoluminescence (PL) spectra of QDs reveal point defects related emission of ZnS QDs. - Graphical abstract: Microwave assisted synthesis of wurtzite ZnS quantum dots (QDs) have been achieved in controlled reaction at temperature as low as 150 Degree-Sign C. The synthesis was performed in different microwave absorbing solvents with multisource or single source precursors for very short reaction periods due to effective heating with microwaves. Highlights: Black-Right-Pointing-Pointer Wurtzite a high temperature phase of ZnS was synthesized at low temperature. Black-Right-Pointing-Pointer Low temperature synthesis was possible because of the use of microwave absorbing solvents. Black-Right-Pointing-Pointer Capping agent was used to control the size of Quantum Dots. Black-Right-Pointing-Pointer Two different systems were developed using single molecular precursor and multisource precursors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of δ-Bi2O3/Bi2MoO6 composites with enhanced photocatalytic activity by hydrothermal method

Highlights: • The δ-Bi{sub 2}O{sub 3}/Bi{sub 2}MoO{sub 6} composites were first synthesized by hydrothermal method. • The product was δ-Bi{sub 2}O{sub 3} rather than α-Bi{sub 2}O{sub 3} with the preset of Bi{sub 2}MoO{sub 6}. • The composites show enhanced photocatalytic activity compared to Bi{sub 2}MoO{sub 6}, α- and δ-Bi{sub 2}O{sub 3}. • The excellent photocatalytic performance was attributed to δ- Bi{sub 2}O{sub 3}/Bi{sub 2}MoO{sub 6} heterojunctions. - Abstract: The δ-Bi{sub 2}O{sub 3}/Bi{sub 2}MoO{sub 6} composites were synthesized by hydrothermal method and the microstructure and photocatalytic property were characterized. The X-ray diffraction (XRD) analysis revealed that δ-Bi{sub 2}O{sub 3} was obtained with the existence of Bi{sub 2}MoO{sub 6}, while the product was α-Bi{sub 2}O{sub 3} without Bi{sub 2}MoO{sub 6} under the same experimental condition. The SEM images and the selected area electron diffraction (SAED) patterns have further verified that δ-Bi{sub 2}O{sub 3} was deposited on Bi{sub 2}MoO{sub 6}. The X-ray photoelectron spectroscopy (XPS) spectrum confirmed that the composites were composed of δ-Bi{sub 2}O{sub 3} and Bi{sub 2}MoO{sub 6}, while a fraction of Mo changed from Mo{sup 6+} to Mo{sup 5+}. The coexistence of Mo{sup 5+}/Mo{sup 6+} can be a critical factor in the formation of stable δ-Bi{sub 2}O{sub 3} on Bi{sub 2}MoO{sub 6}. Particularly, the δ-Bi{sub 2}O{sub 3}/Bi{sub 2}MoO{sub 6} photocatalysts possess favorable photocatalytic performance under simulated sunlight illumination since the recombination of photogenerated electrons and holes was inhibited due to the p-n junction at the interface of δ-Bi{sub 2}O{sub 3} and Bi{sub 2}MoO{sub 6}, and the mechanism was discussed in detail.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Diffused phase transitions in Pb(Zr{sub 0.65}Ti{sub 0.35})O{sub 3}-Pb(Fe{sub 2/3}W{sub 1/3})O{sub 3} multiferroics

The solid solutions of (1−x)Pb(Zr{sub 0.65}Ti{sub 0.35})O{sub 3}-xPb(Fe{sub 2/3}W{sub 1/3})O{sub 3} in different ratios were fabricated by a high-temperature solid-state reaction method using high-purity oxides for possible multi-ferroic applications. Structural analysis using x-ray diffraction powder patterns of the system by Rietveld refinement method exhibits the formation of rhombohedral phase with R3c space group. Detailed studies of dielectric permittivity as a function of temperature of the systems show that the frequency independent dielectric maximum temperature shifts toward room temperature on increasing x. In addition to this, the degree of diffuseness of the permittivity anomaly is more pronounced for higher content of Pb(Fe{sub 2/3}W{sub 1/3})O{sub 3}, implying the existence of a composition-induced diffuse phase transition for the limited range of compositional ratios. Detailed impedance spectroscopy analysis shows the contributions of grain, grain boundary, and interfacial polarizations in the resistive characteristics and conduction mechanism of the materials. The weak ferromagnetic and saturated ferroelectric loops indicate that system with x = 0.1, 0.2 have good multiferroic characteristics, and may be useful for future spintronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modified Magnetic and Electrical Properties of Perovskite-Spinel Multiferroic Composites

Multiferroic composite samples (1 − x) Bi{sub 0.9}Pr{sub 0.1}FeO{sub 3}–xNi{sub 0.5}Co{sub 0.5}Fe{sub 2}O{sub 4} for x = 0, 0.1, 0.2, 0.3, and 1.0 were synthesized by sol-gel auto-combustion method. Detailed investigations were made on the structural, magnetic, and electrical properties of these composites. The X-ray diffraction (XRD) patterns confirm the co-existence of perovskite BPFO and spinel ferrite NCFO without any impurity phase. The average particle size of BPFO and NCFO nanoparticles is nearly equal to 110 nm and 35 nm respectively which are confirmed by XRD and transmission electron microscopy (TEM) analysis. Structural and surface morphology are studied by scanning electron microscopy (SEM). The dielectric properties of the composites are also studied at room temperature. The saturation and remnant magnetization are found to increase with increase in NCFO weight percentage in the composites. The saturation magnetization (Ms) values are 3.38 emu/g, 8.65 emu/g, and 13.87 emu/g and coercivity (Hc) values are 936.52 Oe, 1058.12 Oe, and 1046.77 Oe for BPFO-NCFO 1, 2, and 3 composite samples respectively. The incorporation of BPFO and NCFO enhances the multiferroic properties in the present composite materials which are quite promising for applications point of view.

36 MATERIALS SCIENCE↗