Search NASA⌕ Search

SEARCH · Search NASA

Results for “Distributed Wind”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

THE CONTRIBUTION OF CORONAL JETS TO THE SOLAR WIND

Transient collimated plasma eruptions in the solar corona, commonly known as coronal (or X-ray) jets, are among the most interesting manifestations of solar activity. It has been suggested that these events contribute to the mass and energy content of the corona and solar wind, but the extent of these contributions remains uncertain. We have recently modeled the formation and evolution of coronal jets using a three-dimensional (3D) magnetohydrodynamic (MHD) code with thermodynamics in a large spherical domain that includes the solar wind. Our model is coupled to 3D MHD flux-emergence simulations, i.e., we use boundary conditions provided by such simulations to drive a time-dependent coronal evolution. The model includes parametric coronal heating, radiative losses, and thermal conduction, which enables us to simulate the dynamics and plasma properties of coronal jets in a more realistic manner than done so far. Here, we employ these simulations to calculate the amount of mass and energy transported by coronal jets into the outer corona and inner heliosphere. Based on observed jet-occurrence rates, we then estimate the total contribution of coronal jets to the mass and energy content of the solar wind to (0.4–3.0)% and (0.3–1.0)%, respectively. Our results are largely consistent with the few previous rough estimates obtained from observations, supporting the conjecture that coronal jets provide only a small amount of mass and energy to the solar wind. We emphasize, however, that more advanced observations and simulations (including parametric studies) are needed to substantiate this conjecture.

79 ASTRONOMY AND ASTROPHYSICS↗

SWEEPING AWAY THE MYSTERIES OF DUSTY CONTINUOUS WINDS IN ACTIVE GALACTIC NUCLEI

An integral part of the unified model for active galactic nuclei (AGNs) is an axisymmetric obscuring medium, which is commonly depicted as a torus of gas and dust surrounding the central engine. However, a robust, dynamical model of the torus is required in order to understand the fundamental physics of AGNs and interpret their observational signatures. Here, we explore self-similar, dusty disk winds, driven by both magnetocentrifugal forces and radiation pressure, as an explanation for the torus. Using these models, we make predictions of AGN infrared (IR) spectral energy distributions from 2 to 100 {mu}m by varying parameters such as the viewing angle (from i = 0 Degree-Sign to 90 Degree-Sign ), the base column density of the wind (from N{sub H,0} = 10{sup 23} to 10{sup 25} cm{sup -2}), the Eddington ratio (from L/L{sub Edd} = 0.01 to 0.1), the black hole mass (from M{sub BH} = 10{sup 8} to 10{sup 9} M{sub Sun }), and the amount of power in the input spectrum emitted in the X-ray relative to that emitted in the UV/optical (from {alpha}{sub ox} = 1.1 to 2.1). We find that models with N{sub H,0} = 10{sup 25} cm{sup -2}, L/L{sub Edd} = 0.1, and M{sub BH} {>=} 10{sup 8} M{sub Sun} are able to adequately approximate the general shape and amount of power expected in the IR as observed in a composite of optically luminous Sloan Digital Sky Survey quasars. The effect of varying the relative power coming out in X-rays relative to the UV is a change in the emission below {approx}5 {mu}m from the hottest dust grains; this arises from the differing contributions to heating and acceleration of UV and X-ray photons. We see mass outflows ranging from {approx}1 to 4 M{sub Sun} yr{sup -1}, terminal velocities ranging from {approx}1900 to 8000 km s{sup -1}, and kinetic luminosities ranging from {approx}1 Multiplication-Sign 10{sup 42} to 8 Multiplication-Sign 10{sup 43} erg s{sup -1}. Further development of this model holds promise for using specific features of observed IR spectra in AGNs to infer fundamental physical parameters of the systems.

79 ASTRONOMY AND ASTROPHYSICS↗

Potential Impact of Fast Flavor Oscillations on Neutrino-driven Winds and Their Nucleosynthesis

The wind driven by the intense neutrino emission from a protoneutron star (PNS) is an important site for producing nuclei heavier than the Fe group. Because of certain features in the neutrino angular distributions, the so-called fast flavor oscillations may occur very close to the PNS surface, effectively resetting the neutrino luminosities and energy spectra that drive the wind. Using the unoscillated neutrino emission characteristics from two core-collapse supernova simulations representative of relevant progenitors at the lower and higher mass end, we study the potential effects of fast flavor oscillations on neutrino-driven winds and their nucleosynthesis. We find that such oscillations can increase the total mass loss by factors up to ~1.5–1.7 and lead to significantly more proton-rich conditions. The latter effect can greatly enhance the production of 64 Zn and the so-called light p-nuclei 74 Se, 78 Kr, and 84 Sr. Implications for abundances in metal-poor stars, Galactic chemical evolution in general, and isotopic anomalies in meteorites are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Recent trends in power system reliability and implications for evaluating future investments in resiliency

Here, this study examines the relationship between annual changes in electricity reliability reported by a large cross-section of U.S. electricity distribution utilities over a period of 13 years and a broad set of potential explanatory variables, including weather and utility characteristics. We find statistically significant correlations between the average number of power interruptions experienced annually and above average wind speeds, precipitation, lightning strikes, and a measure of population density: customers per line mile. We also find significant relationships between the average number of minutes of power interruptions experienced and above average wind speeds, precipitation, cooling degree-days, and one strategy used to mitigate the impacts of severe weather: the amount of underground transmission and distribution line miles. Perhaps most importantly, we find a significant time trend of increasing annual average number of minutes of power interruptions over time—especially when interruptions associated with extreme weather are included. Lastly, the research method described in this analysis can provide a basis for future efforts to project long-term trends in reliability and the associated benefits of strategies to improve grid resiliency to severe weather—both in the U.S. and abroad.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Eastern Frequency Response Study

This study was specifically designed to investigate the frequency response of the Eastern Interconnection that results from large loss-of-generation events of the type targeted by the North American Electric Reliability Corp. Standard BAL-003 Frequency Response and Frequency Bias Setting (NERC 2012a), under possible future system conditions with high levels of wind generation.

24 POWER TRANSMISSION AND DISTRIBUTION↗

The Luminous Blue Variable RMC 127 as Seen with ALMA and ATCA

We present ALMA and ATCA observations of the luminous blue variable RMC 127. The radio maps show for the first time the core of the nebula and evidence that the nebula is strongly asymmetric with a Z-pattern shape. Hints of this morphology are also visible in the archival Hubble Space Telescope Hα image, which overall resembles the radio emission. The emission mechanism in the outer nebula is optically thin free–free in the radio. At high frequencies, a component of point-source emission appears at the position of the star, up to the ALMA frequencies. The rising flux density distribution (S{sub ν}∼ν{sup 0.78±0.05}) of this object suggests thermal emission from the ionized stellar wind and indicates a departure from spherical symmetry with n{sub e}(r)∝r{sup −2}. We examine different scenarios to explain this excess of thermal emission from the wind and show that this can arise from a bipolar outflow, supporting the suggestion by other authors that the stellar wind of RMC 127 is aspherical. We fit the data with two collimated ionized wind models, and we find that the mass-loss rate can be a factor of two or more smaller than in the spherical case. We also fit the photometry obtained by IR space telescopes and deduce that the mid- to far-IR emission must arise from extended, cool (∼80 K) dust within the outer ionized nebula. Finally, we discuss two possible scenarios for the nebular morphology: the canonical single-star expanding shell geometry and a precessing jet model assuming the presence of a companion star.

79 ASTRONOMY AND ASTROPHYSICS↗

Sun Also Rises: Planning for Large-Scale Solar Power

Wind, solar, and other renewable energy are an important part of any present-day energy. The portion of energy they supply will certainly be increasing over the next few years. Arguably, large-scale wind power has reached technological maturity, and with more than 100 GW of capacity, ample experience exists on integrating wind systems. Solar technologies, on the other hand, are emerging, and substantial R&D investments are being made to achieve parity with retail electricity costs in the near future. As this happens, annual capacity additions of solar power will become significant.

14 SOLAR ENERGY↗

Probabilistic Wind Power Ramp Forecasting Based on a Scenario Generation Method: Preprint

Wind power ramps (WPRs) are particularly important in the management and dispatch of wind power, and they are currently drawing the attention of balancing authorities. With the aim to reduce the impact of WPRs for power system operations, this paper develops a probabilistic ramp forecasting method based on a large number of simulated scenarios. An ensemble machine learning technique is first adopted to forecast the basic wind power forecasting scenario and calculate the historical forecasting errors. A continuous Gaussian mixture model (GMM) is used to fit the probability distribution function (PDF) of forecasting errors. The cumulative distribution function (CDF) is analytically deduced. The inverse transform method based on Monte Carlo sampling and the CDF is used to generate a massive number of forecasting error scenarios. An optimized swinging door algorithm is adopted to extract all the WPRs from the complete set of wind power forecasting scenarios. The probabilistic forecasting results of ramp duration and start time are generated based on all scenarios. Numerical simulations on publicly available wind power data show that within a predefined tolerance level, the developed probabilistic wind power ramp forecasting method is able to predict WPRs with a high level of sharpness and accuracy.

17 WIND ENERGY↗

Revisiting the Local Leo Cold Cloud and revised constraints on the Local Hot Bubble

The Local Leo Cold Cloud (LLCC, at a distance of 11–24 pc) was studied in its relation to the Local Hot Bubble (LHB) and the result suggested that much of the observed 1/4 keV emission in that direction originates in front of the cloud. This placed a strong constraint on the distribution of X-ray emission within the LHB and called into question the assumption of a uniform distribution of X-ray emitting plasma within the Local Cavity. However, recent work has quantified the contribution of heliospheric solar wind charge exchange (SWCX) emission to the diffuse X-ray background measured by the ROSAT All-Sky Survey (RASS) at 1/4 keV, and led to the consistency of pressure measurements between the LHB and the local cloud component of the complex of local interstellar clouds (CLICs) surrounding the Sun. In this paper we revisit the LLCC and improve the previous analysis by using higher resolution RASS data, a serendipitous ROSAT pointed observation, a rigorous treatment of the band-averaged X-ray absorption cross section, and models for the heliospheric and magnetospheric SWCX contributions. We find that the foreground emission to the cloud is in excess of the expected heliospheric (interplanetary plus near Earth) SWCX contribution but that it is marginally consistent with the range of possible LHB plasma path lengths between the LLCC and the CLICs given the currently understood plasma emissivity.

79 ASTRONOMY AND ASTROPHYSICS↗

Small solar wind transients: Stereo-A observations in 2009

Year 2009 was the last year of a long and pronounced solar activity minimum. In this year the solar wind in the inner heliosphere was for 90% of the time slow (< 450 km s{sup -1}) and with a weaker magnetic field strength compared to the previous solar minimum 1995-1996. We choose this year to present the results of a systematic search for small solar wind transients (STs) observed by the STEREO-Ahead (ST-A) probe. The data are from the PLASTIC and IMPACT instrument suites. By 'small' we mean a duration from {approx}1 to 12 hours. The parameters we search for to identify STs are (i) the total field strength, (ii) the rotation of the magnetic field vector, (iii) its smoothness, (iv) proton temperature, (v) proton beta, and (vi) Alfven Mach number. We find 45 examples. The STs have an average duration of {approx}4 hours. Ensemble averages of key quantities are: (i) maximum B = 7.01 nT; (ii) proton {beta}= 0.18; (iii) proton thermal speed = 20.8 km s{sup -1}; and (iv) Alfven Mach number = 6.13. No distinctive feature is found in the pitch angle distributions of suprathermal electrons. Our statistical results are compared with those of STs observed near Earth by Wind during 2009.

79 ASTRONOMY AND ASTROPHYSICS↗

Analysis of Coastal Fog from a Ship During the C-FOG Campaign

This work presents ship-based measurements of fog off St John’s Newfoundland on 13 September 2018 during the Coastal Fog (C-FOG) field campaign. The measurements included cloud-particle spectra, cloud-base height and aerosol backscatter, radiation, turbulence, visibility, and sea surface temperature. Radiosonde soundings were made at intervals less than 2 hours. Fog occurred in two episodes under the center of eastward-moving synoptic low-pressure system. The boundary layer structure during the first fog episode consisted of 3 layers, separated by 2 saturated air temperature inversions and capped by a subsidence inversion. The lowest layer was fog and the upper layers were cloud. The second fog episode consisted of one well-mixed fog layer capped by a subsidence inversion. Low wind speeds and stable stratification maintained low surface-layer turbulence during fog. Droplet size distributions had typical bimodal distributions. The visibility correlated with the droplet number concentration and liquid water content. The air temperature was higher than the sea surface temperature for the first 30 minutes of the first fog episode but was colder than the sea for the remainder of all fog. The sensible heat flux was upward, from sea to air, for the first 62 % of the first fog episode and then reversed to downward, from air to sea, for the remainder of the first fog episode and the second fog episode. Here, the counter-gradient heat fluxes observed (i.e., opposite to what is expected from the instantaneous air-sea temperature difference) appear to be related to turbulence, entrainment and stratification in the fog layer that overwhelmed the influence of air-sea temperature difference. While the synoptic-scale dynamics preconditioned the area for fog formation, the final step of fog appearance in this case was nuanced by stratification-turbulence interactions, local advective processes and microphysical environment.

54 ENVIRONMENTAL SCIENCES↗

A framework to centre justice in energy transition innovations

The important role of justice in energy transition technologies has been a topic of increasing interest in recent years. However, key questions remain about how inequities influence energy transition innovations (ETIs) from their design to their widespread use, which ETIs receive more funding, and who controls ETI research, prototyping and deployment. Here, in this work, we propose a framework to centre justice in energy transition innovations (CJI) and examine how three tenets of justice (recognition, procedural and distributional justice) influence each level of ETI, including niche, regime and landscape levels. We examine wind energy in Mexico and multiple ETIs in Los Angeles as use cases to show how our CJI framework can help reveal the specific inequities undermining just energy transitions at crucial analytical levels of ETI in practice. Our CJI framework offers a path for promoters, practitioners and underserved communities to target the problems these groups face and create ETIs that better address their specific aspirations, needs and circumstances.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

UNIFICATION OF LUMINOUS TYPE 1 QUASARS THROUGH C IV EMISSION

Using a sample of {approx}30,000 quasars from the 7th Data Release of the Sloan Digital Sky Survey, we explore the range of properties exhibited by high-ionization, broad emission lines, such as C IV {lambda}1549. Specifically, we investigate the anti-correlation between continuum luminosity and emission-line equivalent width (the Baldwin Effect (BEff)) and the 'blueshifting' of the high-ionization emission lines with respect to low-ionization emission lines. Employing improved redshift determinations from Hewett and Wild, the blueshift of the C IV emission line is found to be nearly ubiquitous, with a mean shift of {approx}810 km s{sup -1} for radio-quiet (RQ) quasars and {approx}360 km s{sup -1} for radio-loud (RL) quasars. The BEff is present in both RQ and RL samples. We consider these phenomena within the context of an accretion disk-wind model that is modulated by the nonlinear correlation between ultraviolet and X-ray continuum luminosity. Composite spectra are constructed as a function of C IV emission-line properties in an attempt to reveal empirical relationships between different line species and the continuum. Within a two-component disk+wind model of the broad emission-line region (BELR), where the wind filters the continuum seen by the disk component, we find that RL quasars are consistent with being dominated by the disk component, while broad absorption line quasars are consistent with being dominated by the wind component. Some RQ objects have emission-line features similar to RL quasars; they may simply have insufficient black hole (BH) spin to form radio jets. Our results suggest that there could be significant systematic errors in the determination of L{sub bol} and BH mass that make it difficult to place these findings in a more physical context. However, it is possible to classify quasars in a paradigm where the diversity of BELR parameters is due to differences in an accretion disk wind between quasars (and over time); these differences are underlain primarily by the spectral energy distribution, which ultimately must be tied to BH mass and accretion rate.

79 ASTRONOMY AND ASTROPHYSICS↗

Investigations in the tape-to-tape contact resistance and contact composition in superconducting CORC ® wires

Conductor on Round Core (CORC®) wires and cables, constructed from multiple layers of helically wound REBa 2 Cu 3 O 7–δ tapes, are a promising cable technology for high field magnet applications. An important feature of high-temperature superconductor cables is the ability to share current between conductors, allowing current to bypass drops in I c and minimizing the risk of hot spot formation, which could lead to potential burnout in the superconductor. In contrast to stacked-tape cables, which have continuous contact between tapes, in CORC® the transfer points occur at discrete tape crossovers. The tape-to-tape contact resistance, R c , plays a critical role in the current sharing capabilities and current distribution in cables. For the work reported here, special CORC® wires were manufactured using different winding parameters to investigate variations in R c . Variations comprised inclusion of a lubricant, different lubricant conductivity, inclusion of pre-tinning, and heating briefly to melt the solder. Cables were first tested as straight lengths, followed by bending to a 10 cm diameter. In straight cables R c values ranged from 1 to over 1000 μΩ cm 2 , depending on cabling parameters, with the highest values being found for cables made by the present 'standard' process. Bending the cables to a 10 cm diameter decreased R c by a factor 2–5. Tinning with PbSn decreased R c by three orders of magnitude compared to standard CORC® wires, and heat treating wires with tinned conductor resulted in only a small further decrease in R c . Based on the measured R c at an electric field of 1 μV cm –1 the resulting current transfer length between layers can range from a few millimeters to a tens of centimeters. Examination of contacts with a laser confocal microscope showed plastic deformation of the copper at the edges of the contact overlap area, apparently caused by thicker plating at tape edges digging into the copper of neighboring layers. These images reveal that only a fraction of the total contact surface may actually be touching when there is nothing to compensate for height differential. Images of the PbSn coated tapes indicated that application of solder produces a much more uniform contact surface and higher contact area. Furthermore, imaging of CORC® cross-sections confirmed that in the non-tinned cables there are many regions where tapes are not in contact, while in contrast the PbSn cable shows significantly more contact between the tapes. These different imaging techniques reveal that tape surface morphology is a significant parameter in determining R c .

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Medium Voltage Converter Inductor Insulation Design Considering Grid Requirements

Medium voltage (MV) SiC devices facilitate direct (without 50-/60-Hz transformer) connection of the power electronics converter to the MV grid using simple topology. Compared to the insulation design of MV inductors that have been widely used in the power system, the insulation design of the MV converter filter inductors has new challenges. Particularly, the grid impact on insulation requirements on converter filter inductors is rarely discussed. This article introduces the insulation design of a grid-side filter inductor for a 13.8-kV power conditioning system converter. The grid insulation requirements, including the short-duration power frequency overvoltage and the lightning impulse voltage, are considered in the design. To meet the requirements, the layer-to-layer insulation, winding-to-core/ground insulation, the air gap discharge between the winding and the core, the local electric field, as well as the interturn transient voltage distribution are considered. Furthermore, the designed inductors are validated by the 46 kV (>1 min) dc hi-pot test, 12-kV ac partial discharge test, one-hour single-phase converter full rating test, as well as three-phase converter full rating test.

42 ENGINEERING↗

Storm DEPART(Damage Estimate Prediction And Recovery Tool)

Damage prediction, materials needed, and resource allocation modeling capability in order to support pre-incident planning and preparation by predicting damage to the power generation capacity, transmission grids, distribution networks, and communications assets. The capabilities will be developed by multiple factors to include wind bands, storm surge, and flooding forecasts to participant’s assets which will result in a report of predicted damages. Additional factors to include available participants infrastructure data to include class, age, construction, location, wind rating, and additional information not in the public domain. Based on predicted damages, the output will be a bill of materials (BOM) to support short-term recovery operations. The extensiveness and level of detail for this BOM will depend on the replacement configuration specifications provided for each individual participant asset. Any limiting factors for the model will be applied related supply chain and resource constraints.

Klett, Mary↗

Effects of Village Power Quality on Fuel Consumption and Operating Expenses

Alaska's rural village electric utilities are isolated from the Alaska railbelt electrical grid intertie and from each other. Different strategies have been developed for providing power to meet demand in each of these rural communities. Many of these communities rely on diesel electric generators (DEGs) for power. Some villages have also installed renewable power sources and automated generation systems for controlling the DEGs and other sources of power. For example, Lime Village has installed a diesel battery photovoltaic hybrid system, Kotzebue and Wales have wind-diesel hybrid systems, and McGrath has installed a highly automated system for controlling diesel generators. Poor power quality and diesel engine efficiency in village power systems increases the cost of meeting the load. Power quality problems may consist of poor power factor (PF) or waveform disturbances, while diesel engine efficiency depends primarily on loading, the fuel type, the engine temperature, and the use of waste heat for nearby buildings. These costs take the form of increased fuel use, increased generator maintenance, and decreased reliability. With the cost of bulk fuel in some villages approaching $1.32/liter ($5.00/gallon) a modest 5% decrease in fuel use can result in substantial savings with short payback periods depending on the village's load profile and the cost of corrective measures. This project over its five year history has investigated approaches to improving power quality and implementing fuel savings measures through the use of performance assessment software tools developed in MATLAB{reg_sign} Simulink{reg_sign} and the implementation of remote monitoring, automated generation control, and the addition of renewable energy sources in select villages. The results have shown how many of these communities would benefit from the use of automated generation control by implementing a simple economic dispatch scheme and the integration of renewable energy sources such as wind generation.

24 POWER TRANSMISSION AND DISTRIBUTION↗