Search NASA⌕ Search

SEARCH · Search NASA

Results for “Edge Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Modeling Bimolecular Reactions and Transport in Porous Media Via Particle Tracking

We use a particle-tracking method to simulate several one-dimensional bimolecular reactive transport experiments. In this numerical method, the reactants are represented by particles: advection and dispersion dominate the flow, and molecular diffusion dictates, in large part, the reactions. The particle/particle reactions are determined by a combination of two probabilities dictated by the physics of transport and energetics of reaction. The first is that reactant particles occupy the same volume over a short time interval. The second is the conditional probability that two collocated particles favorably transform into a reaction. The first probability is a direct physical representation of the degree of mixing in an advancing displacement front, and as such lacks empirical parameters except for the user-defined number of particles. This number can be determined analytically from concentration autocovariance, if this type of data is available. The simulations compare favorably to two physical experiments. In one, the concentration of product, 1,2-naphthoquinoe-4-aminobenzene (NQAB) from reaction between 1,2-naphthoquinone-4-sulfonic acid (NQS) and aniline (AN), was measured at the outflow of a column filled with glass beads at different times. In the other, the concentration distribution of reactants (CuSO_4 and EDTA^{4-}) and products (CuEDTA^{4-}) were quantified by snapshots of transmitted light through a column packed with cryloite sand. The thermodynamic rate coefficient in the latter experiment was 10^7 times greater than the former experiment, making it essentially instantaneous. When compared to the solution of the advection-dispersion-reaction equation (ADRE) with the well-mixed reaction coefficient, the experiments and the particle-tracking simulations showed on the order of 20% to 40% less overall product, which is attributed to poor mixing. The poor mixing also leads to higher product concentrations on the edges of the mixing zones, which the particle model simulates more accurately than the ADRE.

54 ENVIRONMENTAL SCIENCES↗

Subsonic characteristics of a twin-jet swept-wing fighter model with maneuvering devices

An investigation has been conducted at Mach numbers ranging from 0.06 to 0.94 to determine the effects of various combinations of leading-edge slat devices on the static aerodynamic characteristics of a twin-jet swept-wing fighter model. The study also included a determination of the effects of wing leading-edge droop, trailing-edge chord-extensions, wing fences, and wing-planform and camber modifications. The angle-of-attack range generally extended from about minus 2 deg to 24 deg and the sideslip angles ranged from about minus 6 deg to 13 deg.

Ray, E. J.↗

Cayley fuzzy graphs on the fuzzy groups

Given non-trivial group G and a non-empty subset S of G such that not containing the identity element of G and S=S{sup −1}:={s"−"1∣s∈S}, the Cayley graph Γ=Cay(G,S) is the graph whose vertex set V(Γ) is G, and edge set E(Γ) is {{g,sg}∣g∈G,s∈S}. The Cayley graphs are presently being considered as models architecture for interconnection networks. When there is an uncertainty on vertices or edges, fuzzy graph has special importance. In this paper, we develop the concept of Cayley fuzzy graphs on the fuzzy groups and investigate some basic properties of Cayley fuzzy graphs. We introduce some sufficient conditions on the fuzzy graphs that under it’s, a fuzzy graph is a Cayley fuzzy graph and discuss some operations of the fuzzy graphs on the Cayley fuzzy graphs, prove that the product of two Cayley fuzzy graphs is a Cayley fuzzy graph, for some products. Also we provide an application of Cayley fuzzy graphs, and use Dijkstra’s Algorithm for finding the fuzzy shortest path in a Cayley fuzzy graph.

97 MATHEMATICS AND COMPUTING↗

Probing the Active Sites of MoS 2 Based Hydrotreating Catalysts Using Modulation Excitation Spectroscopy

The reactive surface sites of MoS 2 hydrotreating catalysts (unpromoted as well as Co- and Ni-promoted) supported on MgAl 2 O 4 spinel were investigated with respect to the substitution of sulfur by oxygen using in situ XAS coupled with modulation excitation spectroscopy (MES). Specifically, MES experiments were carried out by periodically cycling between a H 2 O and H 2 S containing hydrogen gas mixture at 400 °C. Due to the low fraction of S–O exchange, conventional XANES and EXAFS data hardly showed any changes when these catalysts were exposed to increasing ratios of H 2 O to H 2 S in an H 2 atmosphere. XANES and EXAFS data extracted at the Mo K-edge by MES analysis showed that for approximately 1% of the Mo atoms, sulfur atoms are replaced by oxygen atoms when exposed to H 2 O, causing partial oxidation of these active sites. The reaction is reversible and Mo returns to its initial sulfide phase when H 2 O is removed and H 2 S is supplied in the feed. In the case of Co- and Ni-promoted catalysts, the magnitude of S–O exchange was found to be reduced, indicating the beneficial effect of promotion. MES at the Ni K-edge showed that Ni was oxidized during H 2 O exposure, which in turn delayed the Mo oxidation in the Ni-promoted catalyst. The structures of these catalysts under S–O exchange were modeled using density functional theory (DFT) calculations, showing that the edge atoms are affected strongly. For all three catalysts, OH substitution is more favorable, while O substitution could be possible at high H 2 O pressure for unpromoted MoS 2 . Mo K-edge XANES spectra calculated using these simulated structures support the results obtained from the MES experiments. In conclusion, the presented approach using MES in combination with XAS and supported by DFT can be extended in general to catalysts under operando conditions and is thus a useful tool for determination of the active site on an atomic-scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PIV Measurements on a Blowing Flap

PIV measurements of the flow in the region of a flap side edge are presented for several blowing flap configurations. The test model is a NACA 63(sub 2)-215 Hicks Mod-B main-element airfoil with a half-span Fowler flap. Air is blown from small slots located along the flap side edge on either the top, bottom or side surfaces. The test set up is described and flow measurements for a baseline and three blowing flap configurations are presented. The effects that the flap tip jets have on the structure of the flap side edge flow are discussed for each of the flap configurations tested. The results indicate that blowing air from a slot located along the top surface of the flap greatly weakened the top vortex system and pushed it further off the top surface. Blowing from the bottom flap surface kept the strong side vortex further outboard while blowing from the side surface only strengthened the vortex system or accelerated the merging of the side vortex to the flap top surface. It is concluded that blowing from the top or bottom surfaces of the flap may lead to a reduction of flap side edge noise.

Hutcheson, Florence V.↗

Fine resolution remote sensing spectra improves estimates of gross primary production of croplands

Gross primary production (GPP) is a fundamental measure of the terrestrial carbon cycle critical to our understanding of ecosystem function under the changing climate and land use. Remote sensing enables access to continuous spatial coverage, but remains challenged in heterogeneous croplands. Coarse resolution products, like MOD17A (500 m), may aggregate fragmented land cover types commonly found in heavily managed landscapes and misrepresent their respective contribution to carbon production. Consequently, this study demonstrates the capability of fine-resolution imagery (20-30 m) and available red-edge vegetation indices to characterize GPP across seven Midwest cropping systems. Four sites were established on a 22-year-old USDA Conservation Reserve Program (CRP); and the other three on land conventionally farmed with corn-soybean-wheat rotation (AGR). We compare in situ GPP estimates from eddy-covariance towers with ten satellite models: eight variants of the vegetation photosynthesis models (VPM), of which five include a red-edge vegetation index, as well as conventional products Landsat CONUS GPP (30 m) and MOD17A2H V6 (500 m). Daily and cumulative fine-resolution imagery integrated within VPM generally agreed with tower-based GPP in heterogeneous landscapes more than those from MODIS 500 m VPM or conventional GPP products from MOD17AH V6 or Landsat 8 CONUS. Here, replacing EVI2 with red-edge indices NDRE2, NDRE1, and MTCI in Sentinel 2 VPMs notably improved explanation of variance and estimation of cumulative GPP. While existing methods using MODIS- and Landsat-derived GPP are important baselines for regional and global studies, future research may benefit from the higher spatial, temporal, and radiometric resolution.

54 ENVIRONMENTAL SCIENCES↗

Efficient graph representation framework for chemical molecule similarity tasks

Graph data has emerged in numerous scientific domains and machine learning techniques have been widely used for analysis and learning of diverse data for prediction and decision. Machine learning techniques can readily address complex problems by leveraging their structural information. But graphs cannot be directly used for existing machine learning algorithms unless encoded as vectors. The problem of efficient representation of graphs is a substantial challenge in graph machine learning. In this paper, we propose a novel two-stage framework for the representation of chemical molecule graphs based on the strengths of Graph Isomorphism Networks (GINs) and Siamese autoencoders. In the first stage, the GIN model is constructed and trained using the structural information of chemical molecule graphs. Node attributes, edge attributes, and edge indices are used as input data, while graph attributes are used as labels. The GIN model effectively captures the structural characteristics of graphs and can accurately predict graph attributes, i.e., molecular properties. It also generates Graph Embeddings, represented as vectors that encode the structural information of graphs. In the second stage, Graph Embedding vectors are further optimized for downstream similarity tasks while preserving the graph structural information. The Siamese autoencoder is constructed and trained, which reduces the dimensionality of the Graph Embedding vectors, while maximizing the preservation of structural information in the original high-dimensional vectors. The resulting low-dimensional Graph Embeddings can be effectively utilized for tasks such as approximate nearest neighbor search. The experimental results demonstrate the effectiveness of our proposed framework in accurately predicting graph similarity.

Ma, Jiaji↗

Line-blanketed model stellar atmospheres applied to Sirius

The primary goal of this analysis is to determine whether the effects of atomic bound-bound transitions on stellar atmospheric structure can be represented well in models. The investigation is based on an approach which is called the method of artificial absorption edges. The method is described, developed, tested, and applied to the problem of fitting a model stellar atmosphere to Sirius. It is shown that the main features of the entire observed spectrum of Sirius can be reproduced to within the observational uncertainty by a blanketed flux-constant model with T sub eff = 9700 K and Log g = 4.26. The profile of H sub gamma is reproduced completely within the standard deviations of the measurements except near line center, where non-LTE effects are expected to be significant. The equivalent width of H sub gamma, the Paschen slope, the Balmer jump, and the absolute flux at 5550 A all agree with the observed values.

Fowler, J. W.↗

Autonomous Guidance of Agile Small-scale Rotorcraft

This report describes a guidance system for agile vehicles based on a hybrid closed-loop model of the vehicle dynamics. The hybrid model represents the vehicle dynamics through a combination of linear-time-invariant control modes and pre-programmed, finite-duration maneuvers. This particular hybrid structure can be realized through a control system that combines trim controllers and a maneuvering control logic. The former enable precise trajectory tracking, and the latter enables trajectories at the edge of the vehicle capabilities. The closed-loop model is much simpler than the full vehicle equations of motion, yet it can capture a broad range of dynamic behaviors. It also supports a consistent link between the physical layer and the decision-making layer. The trajectory generation was formulated as an optimization problem using mixed-integer-linear-programming. The optimization is solved in a receding horizon fashion. Several techniques to improve the computational tractability were investigate. Simulation experiments using NASA Ames 'R-50 model show that this approach fully exploits the vehicle's agility.

Mettler, Bernard↗

First modeling of strongly radiating WEST plasmas with SOLEDGE-EIRENE

We present first results of SOLEDGE-EIRENE modeling a strongly radiating plasma in the WEST tokamak. Using measurements from a reciprocating Langmuir probe we have determined the SOLEDGE input parameters, i.e. separatrix density at outboard midplane and radial transport coefficients typical of L-mode plasma. We have performed deuterium plasma simulations with presence of oxygen, injected from the core boundary into the simulation domain. The comparison between the radiated power measured from the bolometry in the divertor region and the one computed from SOLEDGE simulations seems to indicate a concentration of oxygen of about 2%. Moreover we have obtained good agreement between simulation results and experimental measurements on electron density and electron temperature profiles at the outer strike point. First qualitative analysis of spectroscopic synthetic diagnostic on D α signals is also presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Atomic and Molecular Collisional Radiative Modeling for Spectroscopy of Low Temperature and Magnetic Fusion Plasmas

The quantitative analysis of spectroscopic data from low temperature plasmas is strongly supported from collisional radiative (CR) modeling. Low pressure plasmas for basic research in the lab and for industrial use have several aspects in common with the cold edge of magnetic fusion plasmas. On the basis of applications of CR modeling for atomic and molecular hydrogen, molecular nitrogen, and diatomic radicals such as CH and C{sub 2}, the relevance of individual processes for data interpretation is demonstrated for ionizing and recombining plasmas. Examples of such processes are opacity, dissociative excitation, dissociative recombination, mutual neutralization, and energy pooling. It is shown that the benchmark of CR modeling with experimental data can be used to identify problems in the ingoing data set of cross sections and rate coefficients. Using the flexible solver Yacora, the capability of CR modeling of low temperature plasmas is highlighted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Additional Comparison of Ice Shapes on Full-Chord and Truncated Swept Wing Models from January 2022

A research program was conducted to evaluate the effectiveness of icing tunnel hybrid model design. A hybrid design is where the full-scale leading edge of a wing section is maintained only to a certain percentage of the local chord, while the aft section of the model is redesigned into a shortened or truncated planform. An initial study was conducted in 2020 where the ice shape geometries on a full-chord length version of the swept CRM65 wing model were compared to those from the hybrid version of CRM65 that were obtained in the NASA Icing Research Tunnel in 2015. The results were reported in a 2021 paper. For most test conditions, the overall size and shape of the ice shapes compared well. However, the ice shapes from the full-chord model were generally slightly smaller than those from the hybrid model. A follow-on test was conducted in 2022 and obtained ice shapes on both full-chord and hybrid wing models during the same test campaign to eliminate the differences in the tunnel spray nozzle configuration and calibration as a cause for the differences observed during the previous investigation. The ice shapes obtained on the full-chord model compared much better to those obtained on the hybrid model during the 2022 test, with nearly identical cross sections and ice mass values generally within 5%.

Icing↗

Additional Comparison of Ice Shapes on Full-Chord and Truncated Swept Wing Models from January 2022

A research program was conducted to evaluate the effectiveness of icing tunnel hybrid model design. A hybrid design is where the full-scale leading edge of a wing section is maintained only to a certain percentage of the local chord, while the aft section of the model is redesigned into a shortened or truncated planform. An initial study was conducted in 2020 where the ice shape geometries on a full-chord length version of the swept CRM65 wing model were compared to those from the hybrid version of CRM65 that were obtained in NASA Icing Research Tunnel in 2015. The results were reported in a 2021 paper. For most test conditions, the overall size and shape of the ice shapes compared well. However, the ice shapes from the full-chord model were generally slightly smaller than those from the hybrid model. A follow-on test was conducted in 2022 and obtained ice shapes on both full-chord and hybrid wing models during the same test campaign to eliminate the differences in the tunnel configuration as a cause for the differences observed during the previous investigation. The ice shapes obtained on the full-chord model compared much better to those obtained on the hybrid model during the 2022 test, with nearly identical cross sections and ice mass values generally within 5%.

Icing↗

Reflections of AE Waves in Finite Plates: Finite Element Modeling and Experimental Measurements

The capability of a three-dimensional dynamic finite element method for predicting far-field acoustic emission signals in thin plates of finite lateral extent, including their reflections from the plate edges, was investigated. A lead break (Hsu-Neilsen) source to simulate AE was modeled and used in the experimental measurements. For the thin plate studied, the signals were primarily composed of the lowest order symmetric (S0) and antisymmetric (A0) Lamb modes. Experimental waveforms were detected with an absolutely calibrated, wideband, conical element transducer. The conditions of lead fractures both on the surface of the plate as well as on the edge of the plate were investigated. Surface lead breaks preferentially generate the A0 mode while edge lead breaks generate the S0 mode. Reflections of developed plate waves from both normal and oblique incidence angles were evaluated. Particularly interesting for the case of the lead break on the plate edge were S0 waves produced by the interaction of a Rayleigh wave with the plate corner and by a bulk shear wave mode converting at the side edge. The Rayleigh wave, in this case, propagated along the specimen edge. For all cases considered, the experimental measurements were in good agreement with the predictions of the finite element model.

Prosser, W. H.↗

Wind-tunnel development of underwing leading-edge vortex generators on a NASA supercritical-wing research airplane configuration

A program for the wind tunnel development of underwing leading-edge vortex generators on an NASA supercritical-wing research airplane model was conducted in the Langley 8-foot transonic pressure tunnel at Mach numbers from 0.25 to 0.99. The effects on the longitudinal aerodynamic characteristics of vortex-generator wing semispan location, distance from wing leading edge, leading-edge sweep angle, toe-in angle, and span are presented. The effects of the vortex generators on the lateral-directional aerodynamic characteristics of the model for a sideslip angle of 5 deg are included.

Bartlett, D. W.↗

Multi-fluid transport code modeling of time-dependent recycling in ELMy H-mode

Simulations of a high-confinement-mode (H-mode) tokamak discharge with infrequent giant type-I ELMs are performed by the multi-fluid, multi-species, two-dimensional transport code UEDGE-MB, which incorporates the Macro-Blob approach for intermittent non-diffusive transport due to filamentary coherent structures observed during the Edge Localized Modes (ELMs) and simple time-dependent multi-parametric models for cross-field plasma transport coefficients and working gas inventory in material surfaces. Temporal evolutions of pedestal plasma profiles, divertor recycling, and wall inventory in a sequence of ELMs are studied and compared to the experimental time-dependent data. Short- and long-time-scale variations of the pedestal and divertor plasmas where the ELM is described as a sequence of macro-blobs are discussed. It is shown that the ELM recovery includes the phase of relatively dense and cold post-ELM divertor plasma evolving on a several ms scale, which is set by the transport properties of H-mode barrier. The global gas balance in the discharge is also analyzed. The calculated rates of working gas deposition during each ELM and wall outgassing between ELMs are compared to the ELM particle losses from the pedestal and neutral-beam-injection fueling rate, correspondingly. A sensitivity study of the pedestal and divertor plasmas to model assumptions for gas deposition and release on material surfaces is presented. The performed simulations show that the dynamics of pedestal particle inventory is dominated by the transient intense gas deposition into the wall during each ELM followed by continuous gas release between ELMs at roughly a constant rate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Coupled Experimental–Theoretical Characterization of a Carbon Electrode in Vanadium Redox Flow Batteries using X-ray Absorption Spectroscopy

Vanadium redox flow batteries (VRFBs) have emerged as promising solutions for stationary grid energy storage due to their high efficiency, scalability, safety, near room-temperature operation conditions, and the ability to independently size power and energy capacities. The performance of VRFBs heavily relies on the redox couple reactions of V 2+ /V 3+ and VO 2+ /VO 2 + on carbon electrodes. Therefore, a thorough understanding of the surface functionality of carbon electrodes and their propensity for degradation during electrochemical cycles is crucial for designing VRFBs with extended lifespans. In this study, we present a coupled experimental–theoretical approach based on carbon K edge X-ray absorption spectroscopy (XAS) to characterize carbon electrodes prepared under different conditions and identify relevant functional groups that contribute to unique spectroscopic features. Atomic models were created to represent functional groups, such as hydroxyl, carboxyl, methyl, and aldehyde, bonded to carbon atoms in either sp 2 or sp 3 environments. The interactions between functionalized carbon and various solvated vanadium complexes were modeled using density functional theory. A library of carbon K-edge XAS spectra was generated for distinct carbon atoms in different functional groups, both before and after interacting with solvated vanadium complexes. Here we demonstrate how these simulated spectra can be used to deconvolve ex situ experimental spectra measured from carbon electrodes and to track changes in the electrode composition following immersion in different electrolytes or extended cycling within a functional VRFB. By doing so, we identify the active species present on the carbon electrodes, which play a crucial role in determining their electrochemical performance.

25 ENERGY STORAGE↗